Date:	Mon, 27 Jul 2015 09:02:46 +0100
From:	Marc Zyngier <marc.zyngier@....com>
To:	Mark Rutland <mark.rutland@....com>,
	"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>
CC:	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"iommu@...ts.linux-foundation.org" <iommu@...ts.linux-foundation.org>,
	"linux-arm-kernel@...ts.infradead.org" 
	<linux-arm-kernel@...ts.infradead.org>,
	Will Deacon <Will.Deacon@....com>,
	Robin Murphy <Robin.Murphy@....com>,
	Lorenzo Pieralisi <Lorenzo.Pieralisi@....com>,
	"arnd@...db.de" <arnd@...db.de>,
	"treding@...dia.com" <treding@...dia.com>,
	"ddaney@...iumnetworks.com" <ddaney@...iumnetworks.com>,
	"majun258@...wei.com" <majun258@...wei.com>,
	"thunder.leizhen@...wei.com" <thunder.leizhen@...wei.com>,
	"tirumalesh.chalamarla@...iumnetworks.com" 
	<tirumalesh.chalamarla@...iumnetworks.com>,
	"laurent.pinchart@...asonboard.com" 
	<laurent.pinchart@...asonboard.com>
Subject: Re: [PATCH 1/3] Docs: dt: add generic MSI bindings

Hi Mark,

On 23/07/15 17:52, Mark Rutland wrote:
> Currently msi-parent is used in a couple of drivers despite being fairly
> underspecified. This patch adds a generic binding for MSIs (including
> the existing msi-parent property) enabling the description of platform
> devices capable of using MSIs.
> 
> While MSIs are primarily distinguished by doorbell and payload, some MSI
> controllers (e.g. the GICv3 ITS) also use side-band information
> accompanying the write to identify the master which originated the MSI,
> to allow for sandboxing. This sideband information is non-probeable and
> needs to be described in the DT. Other MSI controllers may have
> additional configuration details which need to be described per-master.
> 
> This patch adds a generic msi-parent binding document, extending the
> de-facto standard with a new (optional) #msi-cells which can be used to
> express any per-master configuration and/or sideband data. This is
> sufficient to describe non-hotpluggable devices.
> 
> For busses where sideband data may be derived from some bus-specific
> master ID scheme, other properties will be required to describe the
> mapping.
> 
> Signed-off-by: Mark Rutland <mark.rutland@....com>
> ---
>  .../bindings/interrupt-controller/msi.txt          | 135 +++++++++++++++++++++
>  1 file changed, 135 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/msi.txt
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/msi.txt b/Documentation/devicetree/bindings/interrupt-controller/msi.txt
> new file mode 100644
> index 0000000..c60c034
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/msi.txt
> @@ -0,0 +1,135 @@
> +This document describes the generic device tree binding for MSI controllers and
> +their master(s).
> +
> +Message Signaled Interrupts (MSIs) are a class of interrupts generated by a
> +write to an MMIO address.
> +
> +MSIs were originally specified by PCI (and are used with PCIe), but may also be
> +used with other busses, and hence a mechanism is required to relate devices on
> +those busses to the MSI controllers which they are capable of using,
> +potentially including additional information.
> +
> +MSIs are distinguished by some combination of:
> +
> +- The doorbell (the MMIO address written to).
> +  
> +  Devices may be configured by software to write to arbitrary doorbells which
> +  they can address. An MSI controller may feature a number of doorbells.
> +
> +- The payload (the value written to the doorbell).
> +  
> +  Devices may be configured to write an arbitrary payload chosen by software.
> +  MSI controllers may have restrictions on permitted payloads.
> +
> +- Sideband information accompanying the write.
> +  
> +  Typically this is neither configurable nor probeable, and depends on the path
> +  taken through the memory system (i.e. it is a property of the combination of
> +  MSI controller and device rather than a property of either in isolation).
> +
> +
> +MSI controllers:
> +================
> +
> +An MSI controller signals interrupts to a CPU when a write is made to an MMIO
> +address by some master. An MSI controller may feature a number of doorbells.
> +
> +Required properties:
> +--------------------
> +
> +- msi-controller: Identifies the node as an MSI controller.
> +
> +Optional properties:
> +--------------------
> +
> +- #msi-cells: The number of cells in an msi-specifier, required if not zero.
> +
> +  Typically this will encode information related to sideband data, and will
> +  not encode doorbells or payloads as these can be configured dynamically.
> +
> +  The meaning of the msi-specifier is defined by the device tree binding of
> +  the specific MSI controller. 
> +
> +
> +MSI clients
> +===========
> +
> +MSI clients are devices which generate MSIs. For each MSI they wish to
> +generate, the doorbell and payload may be configured, though sideband
> +information may not be configurable.
> +
> +Required properties:
> +--------------------
> +
> +- msi-parent: A list of phandle + msi-specifier pairs, one for each MSI
> +  controller which the device is capable of using.
> +
> +  This property is unordered, and MSIs may be allocated from any combination of
> +  MSI controllers listed in the msi-parent property.
> +
> +  If a device has restrictions on the allocation of MSIs, these restrictions
> +  must be described with additional properties.
> +
> +  When #msi-cells is non-zero, busses with an msi-parent will require
> +  additional properties to describe the relationship between devices on the bus
> +  and the set of MSIs they can potentially generate.
> +
> +
> +Example
> +=======
> +
> +/ {
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +
> +	msi_a: msi-controller@a {
> +		reg = <0xa 0xf00>;
> +		compatible = "vendor-a,some-controller";
> +		msi-controller;
> +		/* No sideband data, so #msi-cells omitted */
> +	};
> +
> +	msi_b: msi-controller@b {
> +		reg = <0xb 0xf00>;
> +		compatible = "vendor-b,another-controller";
> +		msi-controller;
> +		/* Each device has some unique ID */
> +		#msi-cells = <1>;
> +	};
> +
> +	msi_c: msi-controller@c {
> +		reg = <0xb 0xf00>;
> +		compatible = "vendor-b,another-controller";
> +		msi-controller;
> +		/* Each device has some unique ID */
> +		#msi-cells = <1>;
> +	};
> +
> +	dev@0 {
> +		reg = <0x0 0xf00>;
> +		compatible = "vendor-c,some-device";
> +
> +		/* Can only generate MSIs to msi_a */
> +		msi-parent = <&msi_a>;
> +	};
> +
> +	dev@1 {
> +		reg = <0x1 0xf00>;
> +		compatible = "vendor-c,some-device";
> +
> +		/* 
> +		 * Can generate MSIs to either A or B.
> +		 */
> +		msi-parent = <&msi_a>, <&msi_b 0x17>;
> +	};
> +
> +	dev@2 {
> +		reg = <0x2 0xf00>;
> +		compatible = "vendor-c,some-device";
> +		/*
> +		 * Has different IDs at each MSI controller.
> +		 * Can generate MSIs to all of the MSI controllers.
> +		 */
> +		msi-parent = <&msi_a>, <&msi_b 0x17>, <&msi_c 0x53>;
> +	};
> +};
> 

This looks quite good for the non-PCI stuff. Should you also cover the
PCI usage of msi-parent? I'm can't really see the meaning of #msi-cells
in that context. Should it be entirely ignored? OR did you have some
specific usage in mind?

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists