linux-kernel - Re: [PATCH 11/13] rapidio: modify for rev.3 specification changes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Wed, 27 Jul 2016 12:37:13 -0700
From:	Andrew Morton <akpm@...ux-foundation.org>
To:	Michael Ellerman <mpe@...erman.id.au>
Cc:	Alexandre Bounine <alexandre.bounine@....com>,
	Matt Porter <mporter@...nel.crashing.org>,
	Andre van Herk <andre.van.herk@...drive-technologies.com>,
	Barry Wood <barry.wood@....com>, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 11/13] rapidio: modify for rev.3 specification changes

On Wed, 27 Jul 2016 14:53:25 +1000 Michael Ellerman <mpe@...erman.id.au> wrote:

> Alexandre Bounine <alexandre.bounine@....com> writes:
> 
> > Implement changes made in RapidIO specification rev.3 to LP-Serial Physical
> > Layer register definitions:
> > - use per-port register offset calculations based on LP-Serial Extended
> >   Features Block (EFB) Register Map type (I or II) with different per-port
> >   offset step (0x20 vs. 0x40 respectfully).
> > - remove deprecated Parallel Physical layer definitions and related code.
> >
> > Signed-off-by: Alexandre Bounine <alexandre.bounine@....com>
> > Tested-by: Barry Wood <barry.wood@....com>
> > Cc: Matt Porter <mporter@...nel.crashing.org>
> > Cc: Andre van Herk <andre.van.herk@...drive-technologies.com>
> > Cc: Barry Wood <barry.wood@....com>
> > Cc: linux-kernel@...r.kernel.org
> > ---
> >  drivers/rapidio/devices/rio_mport_cdev.c |    2 +-
> >  drivers/rapidio/devices/tsi721.c         |    8 +-
> >  drivers/rapidio/rio-scan.c               |   74 +++----------
> >  drivers/rapidio/rio.c                    |  149 ++++++++++++++-------------
> >  drivers/rapidio/rio.h                    |    2 +-
> >  drivers/rapidio/switches/tsi57x.c        |   26 ++---
> >  include/linux/rio.h                      |   11 +--
> >  include/linux/rio_regs.h                 |  167 +++++++++++++++++++++++------
> >  8 files changed, 248 insertions(+), 191 deletions(-)
> 
> This is breaking the build for me on powerpc, for
> corenet64_smp_defconfig at least.
> 
> eg.
> 
> http://kisskb.ellerman.id.au/kisskb/buildresult/12750751/
> 
> Commit:   Add linux-next specific files for 20160722
> 	  13123042d0dbf7635f052efc2ae69fd9af624f1d
> Compiler: powerpc-linux-gcc (GCC) 4.6.3
> 
> Possible errors
> ---------------
> 
> arch/powerpc/sysdev/fsl_rio.c:702:11: error: 'struct rio_mport' has no member named 'phy_type'
> arch/powerpc/sysdev/fsl_rio.c:702:25: error: 'RIO_PHY_SERIAL' undeclared (first use in this function)
> make[2]: *** [arch/powerpc/sysdev/fsl_rio.o] Error 1
> make[1]: *** [arch/powerpc/sysdev] Error 2
> make: *** [sub-make] Error 2

I'll go out on a limb and assume it's this:

--- a/arch/powerpc/sysdev/fsl_rio.c~powerpc-fsl_rio-apply-changes-for-rio-spec-rev-3-fix
+++ a/arch/powerpc/sysdev/fsl_rio.c
@@ -698,11 +698,6 @@ int fsl_rio_setup(struct platform_device
 			RIO_INB_ATMU_REGS_PORT2_OFFSET));
 
 
-		/* Set to receive any dist ID for serial RapidIO controller. */
-		if (port->phy_type == RIO_PHY_SERIAL)
-			out_be32((priv->regs_win
-				+ RIO_ISR_AACR + i*0x80), RIO_ISR_AACR_AA);
-
 		/* Configure maintenance transaction window */
 		out_be32(&priv->maint_atmu_regs->rowbar,
 			port->iores.start >> 12);
_