| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 21 Jan 2018 18:49:09 +0100
From: jacopo mondi <jacopo@...ndi.org>
To: Hans Verkuil <hverkuil@...all.nl>
Cc: Jacopo Mondi <jacopo+renesas@...ndi.org>,
laurent.pinchart@...asonboard.com, magnus.damm@...il.com,
geert@...der.be, mchehab@...nel.org, festevam@...il.com,
sakari.ailus@....fi, robh+dt@...nel.org, mark.rutland@....com,
pombredanne@...b.com, linux-renesas-soc@...r.kernel.org,
linux-media@...r.kernel.org, linux-sh@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v6 0/9] Renesas Capture Engine Unit (CEU) V4L2 driver
Hi Hans,
On Fri, Jan 19, 2018 at 12:26:09PM +0100, Hans Verkuil wrote:
> Hi Jacopo,
>
> On 01/16/18 22:44, Jacopo Mondi wrote:
> > Hello,
> > new version of CEU after Hans' review.
> >
> > Added his Acked-by to most patches and closed review comments.
> > Running v4l2-compliance, I noticed a new failure introduced by the way I now
> > calculate the plane sizes in set/try_fmt.
> >
> > This is the function used to update per-plane bytesperline and sizeimage:
> >
> > static void ceu_update_plane_sizes(struct v4l2_plane_pix_format *plane,
> > unsigned int bpl, unsigned int szimage)
> > {
> > if (plane->bytesperline < bpl)
> > plane->bytesperline = bpl;
> > if (plane->sizeimage < szimage)
> > plane->sizeimage = szimage;
> > }
> >
> > I'm seeing a failure as v4l2-compliance requires buffers with both bytesperline
> > and sizeimage set to MAX_INT . Hans, is this expected from v4l2-compliance?
> > How should I handle this, if that has to be handled by the single drivers?
>
> I commented on this in my review of patch 3/9.
Fixed thank you.
>
> >
> > Apart from that, here it is the output of v4l2-compliance, with the last tests
> > failing due to the above stated reason, and two errors in try/set format due to
> > the fact the driver is not setting ycbcr encoding after it receives an invalid
>
> Which driver? The CEU driver or the sensor driver? I don't actually see where
> it fails.
>
Here it is:
fail: v4l2-test-formats.cpp(335): ycbcr_enc >= 0xff
fail: v4l2-test-formats.cpp(451): testColorspace(pix_mp.pixelformat, pix_mp.colorspace, pix_mp.ycbcr_enc, pix_mp.quantization)
fail: v4l2-test-formats.cpp(736): Video Capture Multiplanar is valid, but TRY_FMT failed to return a format
test VIDIOC_TRY_FMT: FAIL
fail: v4l2-test-formats.cpp(335): ycbcr_enc >= 0xff
fail: v4l2-test-formats.cpp(451): testColorspace(pix_mp.pixelformat, pix_mp.colorspace, pix_mp.ycbcr_enc, pix_mp.quantization)
fail: v4l2-test-formats.cpp(996): Video Capture Multiplanar is valid, but no S_FMT was implemented
test VIDIOC_S_FMT: FAIL
> > format. I would set those, but I'm not sure what it the correct value and not
> > all mainline drivers do that.
>
> In any case, the default for ycbcr_enc, xfer_func and quantization is 0.
>
Thanks again. I do expect to be the sensor driver to set ycbcr_enc and
quantization, but from a very trivial grep on media/i2c/ I see only a
few drivers taking care of them (adv7511 and adv7842). What about the
others? I assume v4l2-compliance would not fail on them as it does on
ov7670, but I don't see where ycbr_enc (and others) are managed.
Overall, with this addressed, the other issue I mentioned on patch
[3/9] on readbuffers clarified and frameinterval handled for ov722x, I
hope we're done with this series. Thanks again your continued effort
in reviews and guidance.
Thanks
j
> >
> > -------------------------------------------------------------------------------
> > v4l2-compliance SHA : 1d3c611dee82090d9456730e24af368b51dcb4a9
>
> I can't find this SHA in the v4l-utils repo. You should always compile
> v4l2-compliance from the master branch.
>
> Also test with 'v4l2-compliance -f': this tests streaming in all formats.
>
> >
> > Driver Info:
> > Driver name : renesas-ceu
> > Card type : Renesas CEU e8210000.ceu
> > Bus info : platform:renesas-ceu-e8210000.c
> > Driver version: 4.14.0
> > Capabilities : 0x84201000
> > Video Capture Multiplanar
> > Streaming
> > Extended Pix Format
> > Device Capabilities
> > Device Caps : 0x04201000
> > Video Capture Multiplanar
> > Streaming
> > Extended Pix Format
> >
> > Compliance test for device /dev/video0 (not using libv4l2):
> >
> > Required ioctls:
> > test VIDIOC_QUERYCAP: OK
> >
> > Allow for multiple opens:
> > test second video open: OK
> > test VIDIOC_QUERYCAP: OK
> > test VIDIOC_G/S_PRIORITY: OK
> > test for unlimited opens: OK
> >
> > Debug ioctls:
> > test VIDIOC_DBG_G/S_REGISTER: OK
> > test VIDIOC_LOG_STATUS: OK (Not Supported)
> >
> > Input ioctls:
> > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> > test VIDIOC_ENUMAUDIO: OK (Not Supported)
> > test VIDIOC_G/S/ENUMINPUT: OK
> > test VIDIOC_G/S_AUDIO: OK (Not Supported)
> > Inputs: 1 Audio Inputs: 0 Tuners: 0
> >
> > Output ioctls:
> > test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> > Outputs: 0 Audio Outputs: 0 Modulators: 0
> >
> > Input/Output configuration ioctls:
> > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> > test VIDIOC_G/S_EDID: OK (Not Supported)
> >
> > Test input 0:
> >
> > Control ioctls:
> > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> > test VIDIOC_QUERYCTRL: OK
> > test VIDIOC_G/S_CTRL: OK
> > test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> > fail: v4l2-test-controls.cpp(782): subscribe event for control 'User Controls' failed
> > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL
> > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> > Standard Controls: 12 Private Controls: 0
> >
> > Format ioctls:
> > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> > fail: v4l2-test-formats.cpp(1162): ret && node->has_frmintervals
> > test VIDIOC_G/S_PARM: FAIL
> > test VIDIOC_G_FBUF: OK (Not Supported)
> > test VIDIOC_G_FMT: OK
> > fail: v4l2-test-formats.cpp(335): ycbcr_enc >= 0xff
> > fail: v4l2-test-formats.cpp(451): testColorspace(pix_mp.pixelformat, pix_mp.colorspace, pix_mp.ycbcr_enc, pix_mp.quantization)
> > fail: v4l2-test-formats.cpp(736): Video Capture Multiplanar is valid, but TRY_FMT failed to return a format
> > test VIDIOC_TRY_FMT: FAIL
> > fail: v4l2-test-formats.cpp(335): ycbcr_enc >= 0xff
> > fail: v4l2-test-formats.cpp(451): testColorspace(pix_mp.pixelformat, pix_mp.colorspace, pix_mp.ycbcr_enc, pix_mp.quantization)
> > fail: v4l2-test-formats.cpp(996): Video Capture Multiplanar is valid, but no S_FMT was implemented
> > test VIDIOC_S_FMT: FAIL
> > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > test Cropping: OK (Not Supported)
> > test Composing: OK (Not Supported)
> > test Scaling: OK (Not Supported)
> >
> > Codec ioctls:
> > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> > test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >
> > Buffer ioctls:
> > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> > test VIDIOC_EXPBUF: OK
> >
> > Test input 0:
> >
> >
> > Total: 43, Succeeded: 39, Failed: 4, Warnings: 0
>
> 'Failed' must be 0, otherwise I won't Ack this driver.
>
> Regards,
>
> Hans
Powered by blists - more mailing lists