linux-kernel - Re: simultaneous voice/data works (was Re: call/normal switch was Re: omap4-droid4: voice call support was)

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 9 Apr 2018 07:08:47 -0700
From:   Tony Lindgren <tony@...mide.com>
To:     Dan Williams <dcbw@...hat.com>
Cc:     Pavel Machek <pavel@....cz>, Merlijn Wajer <merlijn@...zup.org>,
        Sebastian Reichel <sebastian.reichel@...labora.co.uk>,
        Mark Brown <broonie@...nel.org>,
        Liam Girdwood <lgirdwood@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Lee Jones <lee.jones@...aro.org>,
        Jaroslav Kysela <perex@...ex.cz>,
        Takashi Iwai <tiwai@...e.com>, alsa-devel@...a-project.org,
        linux-omap@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, kernel@...labora.com
Subject: Re: simultaneous voice/data works (was Re: call/normal switch was
 Re: omap4-droid4: voice call support was)

* Dan Williams <dcbw@...hat.com> [180408 02:46]:
> On Sat, 2018-04-07 at 14:22 +0200, Pavel Machek wrote:
> > I tried --location-enable-gps-unmanaged , but that did not work for
> > me.
> 
> That requires a TTY that would spit out the GPS data; in this mode MM
> only sends the start/stop commands, and what comes out the GPS TTY is
> undefined (at least by MM).
> 
> So unless you know that one of the 6600's TTYs does GPS and in what
> format it does GPS, then no.

There should be a NMEA port within the unknown port range ttyUSB[123].

Is there some easy way to enable --location-enable-gps-unmanaged for
testing so I can check if GPS gets enabled for one of the ports?

Regards,

Tony