| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 26 Jun 2015 03:20:35 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Yanir Lubetkin <yanirx.lubetkin@...el.com>, netdev@...r.kernel.org,
nhorman@...hat.com, sassmann@...hat.com, jogreene@...hat.com,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net 05/10] e1000e: i219 - fix to enable both ULP and EEE in Sx state
From: Yanir Lubetkin <yanirx.lubetkin@...el.com>
In i219, there is a hardware bug that prevented ULP entry.
A side effect of the original software fix for this was that EEE in
Sx couldn't be enabled.
This patch implements a modified flow that allows both ULP and EEE in Sx.
Signed-off-by: Yanir Lubetkin <yanirx.lubetkin@...el.com>
Tested-by: Aaron Brown <aaron.f.brown@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/e1000e/ich8lan.c | 45 ++++++++++++++++++++---------
1 file changed, 32 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index c742a4f..c5bb1dd 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -1089,6 +1089,7 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx)
u32 mac_reg;
s32 ret_val = 0;
u16 phy_reg;
+ u16 oem_reg = 0;
if ((hw->mac.type < e1000_pch_lpt) ||
(hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_LM) ||
@@ -1130,33 +1131,37 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx)
if (ret_val)
goto out;
+ /* Force SMBus mode in PHY */
+ ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg);
+ if (ret_val)
+ goto release;
+ phy_reg |= CV_SMB_CTRL_FORCE_SMBUS;
+ e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg);
+
+ /* Force SMBus mode in MAC */
+ mac_reg = er32(CTRL_EXT);
+ mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS;
+ ew32(CTRL_EXT, mac_reg);
+
/* Si workaround for ULP entry flow on i127/rev6 h/w. Enable
* LPLU and disable Gig speed when entering ULP
*/
if ((hw->phy.type == e1000_phy_i217) && (hw->phy.revision == 6)) {
ret_val = e1000_read_phy_reg_hv_locked(hw, HV_OEM_BITS,
- &phy_reg);
+ &oem_reg);
if (ret_val)
goto release;
+
+ phy_reg = oem_reg;
phy_reg |= HV_OEM_BITS_LPLU | HV_OEM_BITS_GBE_DIS;
+
ret_val = e1000_write_phy_reg_hv_locked(hw, HV_OEM_BITS,
phy_reg);
+
if (ret_val)
goto release;
}
- /* Force SMBus mode in PHY */
- ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg);
- if (ret_val)
- goto release;
- phy_reg |= CV_SMB_CTRL_FORCE_SMBUS;
- e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg);
-
- /* Force SMBus mode in MAC */
- mac_reg = er32(CTRL_EXT);
- mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS;
- ew32(CTRL_EXT, mac_reg);
-
/* Set Inband ULP Exit, Reset to SMBus mode and
* Disable SMBus Release on PERST# in PHY
*/
@@ -1168,10 +1173,15 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx)
if (to_sx) {
if (er32(WUFC) & E1000_WUFC_LNKC)
phy_reg |= I218_ULP_CONFIG1_WOL_HOST;
+ else
+ phy_reg &= ~I218_ULP_CONFIG1_WOL_HOST;
phy_reg |= I218_ULP_CONFIG1_STICKY_ULP;
+ phy_reg &= ~I218_ULP_CONFIG1_INBAND_EXIT;
} else {
phy_reg |= I218_ULP_CONFIG1_INBAND_EXIT;
+ phy_reg &= ~I218_ULP_CONFIG1_STICKY_ULP;
+ phy_reg &= ~I218_ULP_CONFIG1_WOL_HOST;
}
e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg);
@@ -1183,6 +1193,15 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx)
/* Commit ULP changes in PHY by starting auto ULP configuration */
phy_reg |= I218_ULP_CONFIG1_START;
e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg);
+
+ if ((hw->phy.type == e1000_phy_i217) && (hw->phy.revision == 6) &&
+ to_sx && (er32(STATUS) & E1000_STATUS_LU)) {
+ ret_val = e1000_write_phy_reg_hv_locked(hw, HV_OEM_BITS,
+ oem_reg);
+ if (ret_val)
+ goto release;
+ }
+
release:
hw->phy.ops.release(hw);
out:
--
2.4.3
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists