lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-ID: <JIEPJGFPFMFIGBNCPKGGCEJMFFAA.security@SmallNetSolutions.com> From: security at SmallNetSolutions.com (Burton M. Strauss III) Subject: RE: Addressing Cisco Security Issues Really, your gripe is with Alltel which refused to provide it to you. Maybe a non-Alltel e-mail account is a red flag, but they certainly should have been willing to provide it to the contact address they have on your account. Whether electronically or via snail mail - I'm SURE they have an address for you so you can be billed, right??? In Cisco's defense, there are 1000s (10000s? 100000s?) of these units out there and most of them have ISP specific configurations. If you apply generic firmware, you are going to wipe the settings - and Cisco has no way of knowing how the unit was configured. Still, it would be best practices for Cisco to provide the generic firmware, with a document showing how to save and restore the settings. However, they may not be contractually able to do so... -----Burton > I have to post this because I consider this to be a security issue in it's > own right. > > Recently there were a number of exploits released for cisco > equipment, among > the affected equipment were the 677 and 678 consumer DSL routers of which > there are millions in use. > > I have one such router, the DSL circuit is provided by Alltel and I work for > the ISP who provides the actual internet access. > > So upon reading recent warning notice sent to the security email lists about > the exploits being publicly available I went and read > http://www.cisco.com/warp/public/707/CBOS-DoS.shtml which pretty much says > any router running a version of CBOS prior to 2.4.5 (actually you need 2.4.6 > because of later exploits) is vulnerable. > > So like a good netizen I contacted cisco TAC via telephone, gave them my 678 > serial number and they informed me that they could not provide the security > update because my router is registered to alltel (alltel did provide the > router when I ordered the DSL circuit), please call Alltel to > get it. Ok so > then I called Alltel, who told me no problem we can email you the update and > asked for my email address. Except since Alltel is not the ISP I don't have > an alltel email address so then they won't email it to me, please contact > your ISP. I then informed Alltel that I AM MY ISP to which they replied they > still could not provide the patch and that I would have to get it from > Cisco. > > So then I call Cisco TAC again, this time I explain the full details of all > I've just been thru and the tech decides to ask someone. Comes back and says > if I register on the cisco website that he can open a ticket and get someone > to call me back on it. (I'm presently waiting for that call) > > In the mean time I decided to google for it and low and behold I found 2.4.6 > on a website (url not posted to protect the life saving individuals who put > it on the web). Now of course I've no way to know if this version I just > found is safe or not but HELLO CISCO??? > > If you are going to issue security alerts that require ISP's and consumers > to patch their hardware devices then you had better damn well make sure that > folks can actually GET THE PATCHES. It would require no effort at all to > post a bogus version full of back doors and whatnot on the web and after > seeing the nightmare it is to obtain the patch thru official channels it's > clear to me that this would be a very popular download. > > Geo. >
Powered by blists - more mailing lists