lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <50AA4DA9.5090602@redhat.com>
Date:	Mon, 19 Nov 2012 09:18:01 -0600
From:	Eric Sandeen <sandeen@...hat.com>
To:	Drew Reusser <dreusser@...il.com>
CC:	linux-ext4@...r.kernel.org
Subject: Re: Issue with bad file system

On 11/18/12 10:46 PM, Drew Reusser wrote:
> Hello all,
> 
> I am having an issue with a ext4 file system which I cannot get to
> come back up.  There were no changes that I know of, but I rebooted,
> and when the system came back up it was not able to read from the hard
> drives.  I have it setup in a raid 10 configuration, and can mount the
> raid array with no issues.  However when I mount the file system, I
> get the following error "EXT4-fs (md0): VFS: Can't find ext4
> filesystem" from the log files.
> 
> Is there anyone that can help as I have to get this data back and I
> prefer not to have to go to a professional to get it back and spend
> the money.
> 
> -Drew
> 
> Basic Info:  4x1TB disks, raid 10 equaling 2TB total.  All four disks
> are just one giant partition starting at the 2MB mark so I could boot
> and put mdadm in the boot sector and get into linux.
> 
> Some basic commands below:
> 
> 
> mint mnt # mount -t ext4 /dev/md0 /mnt/raid
> mount: wrong fs type, bad option, bad superblock on /dev/md0,
>        missing codepage or helper program, or other error
>        In some cases useful info is found in syslog - try
>        dmesg | tail  or so
> 

Ok, at this point you need to do what it says:

# dmesg | tail

so we can see for ourselves why the kernel rejected it (is there 
anything other than "EXT4-fs (md0): VFS: Can't find ext4
filesystem" ?

does /proc/mdstat look right?  This is more likely an md config
issue than an ext4 problem.  What does file -s /dev/md0 or
blkid /dev/md0 say?

-Eric

> 
> 
> C is the pen-drive I am booting from currently and F is the 2TB disk I
> was using to backup to.
> 
> mint dev # cat /proc/partitions
> major minor  #blocks  name
> 
>    7        0     939820 loop0
>    8        0  976762584 sda
>    8        1  976760832 sda1
>    8       16  976762584 sdb
>    8       17  976237568 sdb1
>    8       32    1985024 sdc
>    8       33    1984960 sdc1
>    8       48  976762584 sdd
>    8       49  976760832 sdd1
>    8       64  976762584 sde
>    8       65  976237568 sde1
>   11        0    1048575 sr0
>    8       80 1953514584 sdf
>    8       81 1953512448 sdf1
> --
> To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ