linux-kernel - Re: 2.6.19-rc5-mm1 : probe of 0000:00:1f.2 failed with error -16

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <200611131654.27187.cova@ferrara.linux.it>
Date:	Mon, 13 Nov 2006 16:54:26 +0100
From:	Fabio Coatti <cova@...rara.linux.it>
To:	Remi <remi.colinet@...e.fr>
Cc:	linux-kernel@...r.kernel.org
Subject: Re: 2.6.19-rc5-mm1 : probe of 0000:00:1f.2 failed with error -16

Alle 16:20, lunedì 13 novembre 2006, Remi ha scritto:
> Selon Fabio Coatti <cova@...rara.linux.it>:
> > > ata_piix: probe of 0000:00:1f.2 failed with error -16
> > > Kernel panic - not syncing: Attempted to kill init!
> > >
> > > I disabled most options in my .config file just keeping ata_piix
> > > enabled. 2.6.19-rc5 still boots fine but 2.6.19-rc-mm1 gives the same
> > > previous message.
> >
> > It seems exactly the same problem that is hitting me:
> >
> > http://lkml.org/lkml/2006/11/13/37
> >
> > If some patch comes out, I'll be willing to try it asap ;)
>
> You are getting the same message
>
> ata_piix 0000:00:1f.2: MAP [ P0 P1 IDE IDE ]
> ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 17
> PCI: Unable to reserve I/O region #1:8@1f0 for device 0000:00:1f.2
> ata_piix: probe of 0000:00:1f.2 failed with error -16
>
> But, your drives are driven by the sata_sil driver, which seems to be ok.
> See your partition tables displayed below.

Not exactly: my fault to not including previous mails, but basically I've two 
different devices: one driven by sata_sil, the other by piix.
cfr: http://lkml.org/lkml/2006/11/12/20
In this dmesg, the kernel finds only the second device, and assigns the 
name "sda"; of course the right drive (the real "sda" on my system) is not 
detected so the kernel is searching the "/" filesystem where it cannot be 
found.

here the relevant part of lspci output:

00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 
02) (prog-if 8a [Master SecP PriP])
        Subsystem: ABIT Computer Corp. Unknown device 1014
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 17
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at f000 [size=16]


03:03.0 RAID bus controller: Silicon Image, Inc. SiI 3112 [SATALink/SATARaid] 
Serial ATA Controller (rev 02)
        Subsystem: Silicon Image, Inc. SiI 3112 SATARaid Controller
        Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
        I/O ports at 8000 [size=8]
        I/O ports at 8400 [size=4]
        I/O ports at 8800 [size=8]
        I/O ports at 8c00 [size=4]
        I/O ports at 9000 [size=16]
        Memory at fb005000 (32-bit, non-prefetchable) [size=512]
        [virtual] Expansion ROM at 50000000 [disabled] [size=512K]
        Capabilities: [60] Power Management version 2




-- 
Fabio "Cova" Coatti    http://members.ferrara.linux.it/cova     
Ferrara Linux Users Group           http://ferrara.linux.it
GnuPG fp:9765 A5B6 6843 17BC A646  BE8C FA56 373A 5374 C703
Old SysOps never die... they simply forget their password.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/