lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20061120192335.GA11879@in.ibm.com>
Date:	Mon, 20 Nov 2006 14:23:35 -0500
From:	Vivek Goyal <vgoyal@...ibm.com>
To:	Pavel Emelianov <xemul@...nvz.org>
Cc:	Andrew Morton <akpm@...l.org>, mingo@...hat.com,
	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
	Kirill Korotaev <dev@...nvz.org>
Subject: Re: [RFC] [PATCH] Fix misrouted interrupts deadlocks

On Fri, Nov 10, 2006 at 04:55:48PM +0300, Pavel Emelianov wrote:
> As the second lock on booth CPUs is taken before checking that
> this irq is being handled in another processor this may cause
> a deadlock. This issue is only theoretical.
> 
> I propose the attached patch to fix booth problems: when trying
> to handle misrouted IRQ active desc->lock may be unlocked.
> 
> Please comment.

> --- ./kernel/irq/spurious.c.irqlockup	2006-11-09 11:19:10.000000000 +0300
> +++ ./kernel/irq/spurious.c	2006-11-10 16:53:38.000000000 +0300
> @@ -147,7 +147,11 @@ void note_interrupt(unsigned int irq, st
>  	if (unlikely(irqfixup)) {
>  		/* Don't punish working computers */
>  		if ((irqfixup == 2 && irq == 0) || action_ret == IRQ_NONE) {
> -			int ok = misrouted_irq(irq);
> +			int ok;
> +
> +			spin_unlock(&desc->lock);
> +			ok = misrouted_irq(irq);
> +			spin_lock(&desc->lock);

Hi Pavel,

Till -rc5, I was able to boot a kernel with irqpoll option and in -rc6 I 
can't. It simply hangs. I suspect it is realted to this change. I have yet
to confirm that. But before that one observation.

Not at every place note_interrupt() is called with desc->lock() held. For
example, handle_level_irq(). I enabled spin lock debugging and I run into
following BUG().


PID hash table entries: 256 (order: 8, 2048 bytes)
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 3000.218 MHz processor.

=====================================
[ BUG: bad unlock balance detected! ]
-------------------------------------
swapper/0 is trying to release lock (&irq_desc_lock_class) at:
[<ffffffff8104c673>] note_interrupt+0x7a/0x22b
but there are no more locks to release!

other info that might help us debug this:
no locks held by swapper/0.

stack backtrace:

Call Trace:
  [<ffffffff8100a6f9>] show_trace+0x34/0x47
  [<ffffffff8100a71e>] dump_stack+0x12/0x17
  [<ffffffff8103caba>] print_unlock_inbalance_bug+0xfb/0x106
  [<ffffffff8103e6e5>] lock_release+0x89/0x128
  [<ffffffff81332d96>] _spin_unlock+0x17/0x20
  [<ffffffff8104c673>] note_interrupt+0x7a/0x22b
  [<ffffffff8104d131>] handle_level_irq+0xab/0xea
  [<ffffffff8100b776>] do_IRQ+0xf4/0x132
  [<ffffffff81009956>] ret_from_intr+0x0/0xf
DWARF2 unwinder stuck at ret_from_intr+0x0/0xf
Leftover inexact backtrace:

  <IRQ>  <EOI>  [<ffffffff8159f61d>] start_kernel+0x178/0x2f6
  [<ffffffff8159f625>] start_kernel+0x180/0x2f6
  [<ffffffff8159f61d>] start_kernel+0x178/0x2f6
  [<ffffffff8159f13e>] _sinittext+0x13e/0x142

BUG: spinlock lockup on CPU#0, swapper/0, ffffffff81586140

Call Trace:
  [<ffffffff8100a6f9>] show_trace+0x34/0x47
  [<ffffffff8100a71e>] dump_stack+0x12/0x17
  [<ffffffff811457c8>] _raw_spin_lock+0xca/0xe8
  [<ffffffff8104d139>] handle_level_irq+0xb3/0xea
  [<ffffffff8100b776>] do_IRQ+0xf4/0x132
  [<ffffffff81009956>] ret_from_intr+0x0/0xf
DWARF2 unwinder stuck at ret_from_intr+0x0/0xf

Leftover inexact backtrace:

  <IRQ>  <EOI>  [<ffffffff8159f61d>] start_kernel+0x178/0x2f6
  [<ffffffff8159f625>] start_kernel+0x180/0x2f6
  [<ffffffff8159f61d>] start_kernel+0x178/0x2f6
  [<ffffffff8159f13e>] _sinittext+0x13e/0x142

Thanks
Vivek
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ