| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 21 Nov 2006 16:37:15 -0800
From: "Gaston, Jason D" <jason.d.gaston@...el.com>
To: "Gaston, Jason D" <jason.d.gaston@...el.com>, <jgarzik@...ox.com>,
<linux-ide@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH 2.6.19-rc6] ata_piix: IDE mode SATA patch for Intel ICH9
Did this come through ok, using Evolution, or do I need to try a
different email client and send again?
Thanks,
Jason
-----Original Message-----
From: Gaston, Jason D
Sent: Tuesday, November 21, 2006 2:52 PM
To: jgarzik@...ox.com; linux-ide@...r.kernel.org;
linux-kernel@...r.kernel.org; Gaston, Jason D
Subject: [PATCH 2.6.19-rc6] ata_piix: IDE mode SATA patch for Intel ICH9
This patch adds the Intel ICH9 IDE mode SATA controller DID's.
Signed-off-by: Jason Gaston <jason.d.gaston@...el.com>
--- linux-2.6.19-rc6/drivers/ata/ata_piix.c.orig 2006-11-20
04:58:48.000000000 -0800
+++ linux-2.6.19-rc6/drivers/ata/ata_piix.c 2006-11-20
06:15:12.000000000 -0800
@@ -127,6 +127,7 @@
ich6_sata_ahci = 8,
ich6m_sata_ahci = 9,
ich8_sata_ahci = 10,
+ ich9_sata_ahci = 11,
/* constants for mapping table */
P0 = 0, /* port 0 */
@@ -227,14 +228,26 @@
{ 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci
},
/* 2801GBM/GHM (ICH7M, identical to ICH6M) */
{ 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci
},
- /* Enterprise Southbridge 2 (where's the datasheet?) */
+ /* Enterprise Southbridge 2 (631xESB/632xESB) */
{ 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci
},
- /* SATA Controller 1 IDE (ICH8, no datasheet yet) */
+ /* SATA Controller 1 IDE (ICH8) */
{ 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci
},
- /* SATA Controller 2 IDE (ICH8, ditto) */
+ /* SATA Controller 2 IDE (ICH8) */
{ 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci
},
- /* Mobile SATA Controller IDE (ICH8M, ditto) */
+ /* Mobile SATA Controller IDE (ICH8M) */
{ 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci
},
+ /* SATA Controller 1 IDE (ICH9) */
+ { 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_sata_ahci
},
+ /* SATA Controller 1 IDE (ICH9) */
+ { 0x8086, 0x2921, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_sata_ahci
},
+ /* SATA Controller 2 IDE (ICH9) */
+ { 0x8086, 0x2926, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_sata_ahci
},
+ /* Mobile SATA Controller 1 IDE (ICH9M) */
+ { 0x8086, 0x2928, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_sata_ahci
},
+ /* Mobile SATA Controller 2 IDE (ICH9M) */
+ { 0x8086, 0x292d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_sata_ahci
},
+ /* Mobile SATA Controller 2 IDE (ICH9M) */
+ { 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_sata_ahci
},
{ } /* terminate list */
};
@@ -425,6 +438,19 @@
},
};
+static const struct piix_map_db ich9_map_db = {
+ .mask = 0x3,
+ .port_enable = 0x3,
+ .present_shift = 8,
+ .map = {
+ /* PM PS SM SS MAP */
+ { P0, P2, P1, P3 }, /* 00b (hardwired when in AHCI)
*/
+ { RV, RV, RV, RV },
+ { IDE, IDE, NA, NA }, /* 10b (IDE mode) */
+ { RV, RV, RV, RV },
+ },
+};
+
static const struct piix_map_db *piix_map_db_table[] = {
[ich5_sata] = &ich5_map_db,
[esb_sata] = &ich5_map_db,
@@ -432,6 +458,8 @@
[ich6_sata_ahci] = &ich6_map_db,
[ich6m_sata_ahci] = &ich6m_map_db,
[ich8_sata_ahci] = &ich8_map_db,
+ [ich9_sata_ahci] = &ich9_map_db,
+
};
static struct ata_port_info piix_port_info[] = {
@@ -553,6 +581,18 @@
.port_ops = &piix_sata_ops,
},
+ /* ich9_sata_ahci: 11 */
+ {
+ .sht = &piix_sht,
+ .flags = ATA_FLAG_SATA |
+ PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR |
+ PIIX_FLAG_AHCI,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x7f, /* udma0-6 */
+ .port_ops = &piix_sata_ops,
+ },
+
};
static struct pci_bits piix_enable_bits[] = {
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists