linux-kernel - Re: [PATCH] OMAP: I2C driver for TI OMAP boards #3

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date:	Wed, 6 Dec 2006 14:45:12 -0800
From:	Tony Lindgren <tony@...mide.com>
To:	Jean Delvare <khali@...ux-fr.org>
Cc:	Komal Shah <komal_shah802003@...oo.com>,
	David Brownell <david-b@...bell.net>, r-woodruff2@...com,
	linux-kernel@...r.kernel.org, i2c@...sensors.org
Subject: Re: [PATCH] OMAP: I2C driver for TI OMAP boards #3

Hi,

* Jean Delvare <khali@...ux-fr.org> [061204 09:49]:
> Hi Tony, all,
> 
> On Thu, 10 Aug 2006 16:19:26 +0300, Tony Lindgren wrote:
> > * Jean Delvare <khali@...ux-fr.org> [060810 11:30]:
> > > I've now taken Komal's patch (#4). Here is a proposed patch which brings
> > > the prescaler computation formula in line with your comment and table
> > > above. It could be applied on top of Komal's patch unless it causes a
> > > problem on some of the OMAP systems. For XOR = 13 MHz, it changes the
> > > prescaler from 0 to 1. For XOR = 19.2 MHz it changes the prescaler from
> > > 2 to 1.
> > 
> > OK cool. As far as I'm concerned, I'm fine with it too:
> > Signed-off-by: Tony Lindgren <tony@...mide.com>
> >  
> > > I don't have any hardware to test it, though. If it happens to be
> > > better to be slightly over 12 MHz than slightly below 7 MHz, the
> > > "> 12000000" condition below can be replaced with "> 14000000".
> > 
> > Thanks, we'll test it on various omaps and let you know if it works.
> 
> Any news on this? I still have this patch in my local tree. Should I
> push it into Linux 2.6.20?
> 
> i2c: Fix OMAP clock prescaler to match the comment
> 
> Signed-off-by: Tony Lindgren <tony@...mide.com>
> Signed-off-by: Jean Delvare <khali@...ux-fr.org>
> ---
>  drivers/i2c/busses/i2c-omap.c |    4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> --- linux-2.6.18-rc4.orig/drivers/i2c/busses/i2c-omap.c	2006-08-10 09:56:54.000000000 +0200
> +++ linux-2.6.18-rc4/drivers/i2c/busses/i2c-omap.c	2006-08-10 10:12:03.000000000 +0200
> @@ -231,8 +231,8 @@
>  		 * 13		2		1
>  		 * 19.2		2		1
>  		 */
> -		if (fclk_rate > 16000000)
> -			psc = (fclk_rate + 8000000) / 12000000;
> +		if (fclk_rate > 12000000)
> +			psc = fclk_rate / 12000000;
>  	}
>  
>  	/* Setup clock prescaler to obtain approx 12MHz I2C module clock: */

Sorry for the delay in replying. Yes, it's safe to push. When the original
code was done, the max limit of 12MHz was ignored.

Regards,

Tony
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/