[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20061204184908.909bad9b.khali@linux-fr.org>
Date: Mon, 4 Dec 2006 18:49:08 +0100
From: Jean Delvare <khali@...ux-fr.org>
To: Tony Lindgren <tony@...mide.com>
Cc: Komal Shah <komal_shah802003@...oo.com>,
David Brownell <david-b@...bell.net>, r-woodruff2@...com,
linux-kernel@...r.kernel.org, i2c@...sensors.org
Subject: Re: [PATCH] OMAP: I2C driver for TI OMAP boards #3
Hi Tony, all,
On Thu, 10 Aug 2006 16:19:26 +0300, Tony Lindgren wrote:
> * Jean Delvare <khali@...ux-fr.org> [060810 11:30]:
> > I've now taken Komal's patch (#4). Here is a proposed patch which brings
> > the prescaler computation formula in line with your comment and table
> > above. It could be applied on top of Komal's patch unless it causes a
> > problem on some of the OMAP systems. For XOR = 13 MHz, it changes the
> > prescaler from 0 to 1. For XOR = 19.2 MHz it changes the prescaler from
> > 2 to 1.
>
> OK cool. As far as I'm concerned, I'm fine with it too:
> Signed-off-by: Tony Lindgren <tony@...mide.com>
>
> > I don't have any hardware to test it, though. If it happens to be
> > better to be slightly over 12 MHz than slightly below 7 MHz, the
> > "> 12000000" condition below can be replaced with "> 14000000".
>
> Thanks, we'll test it on various omaps and let you know if it works.
Any news on this? I still have this patch in my local tree. Should I
push it into Linux 2.6.20?
i2c: Fix OMAP clock prescaler to match the comment
Signed-off-by: Tony Lindgren <tony@...mide.com>
Signed-off-by: Jean Delvare <khali@...ux-fr.org>
---
drivers/i2c/busses/i2c-omap.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- linux-2.6.18-rc4.orig/drivers/i2c/busses/i2c-omap.c 2006-08-10 09:56:54.000000000 +0200
+++ linux-2.6.18-rc4/drivers/i2c/busses/i2c-omap.c 2006-08-10 10:12:03.000000000 +0200
@@ -231,8 +231,8 @@
* 13 2 1
* 19.2 2 1
*/
- if (fclk_rate > 16000000)
- psc = (fclk_rate + 8000000) / 12000000;
+ if (fclk_rate > 12000000)
+ psc = fclk_rate / 12000000;
}
/* Setup clock prescaler to obtain approx 12MHz I2C module clock: */
--
Jean Delvare
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists