linux-kernel - Re: [i2c] Why to I2c drivers not autoload like other PCI devices?

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20070104095412.16ac9f53@localhost>
Date:	Thu, 4 Jan 2007 09:54:12 -0800
From:	Stephen Hemminger <shemminger@...l.org>
To:	Jean Delvare <khali@...ux-fr.org>
Cc:	Greg KH <greg@...ah.com>, i2c@...sensors.org,
	linux-kernel@...r.kernel.org
Subject: Re: [i2c] Why to I2c drivers not autoload like other PCI devices?

On Thu, 4 Jan 2007 17:54:12 +0100
Jean Delvare <khali@...ux-fr.org> wrote:

> On Wed, 3 Jan 2007 21:51:28 -0800, Greg KH wrote:
> > On Wed, Jan 03, 2007 at 05:29:16PM -0800, Stephen Hemminger wrote:
> > > On Wed, 3 Jan 2007 16:56:00 -0800
> > > Greg KH <greg@...ah.com> wrote:
> > > 
> > > > On Wed, Jan 03, 2007 at 04:50:20PM -0800, Stephen Hemminger wrote:
> > > > > Is there some missing magic (udev rule?) that keeps i2c device modules
> > > > > from loading? For example: the Intel i2c-i801 module ought to get loaded
> > > > > automatically on boot up since it has a set of PCI id's that generate
> > > > > the necessary module aliases. It would be better if I2C device's autoloaded
> > > > > like other PCI devices.
> > > > 
> > > > No, it should autoload, if it has a MODULE_DEVICE_TABLE() in it.  In
> > > > fact, the i2c-i801 autoloads on one of my machines just fine.  Are you
> > > > sure your pci ids match properly?
> > > > 
> > > > thanks,
> > > > 
> > > > greg k-h
> > > 
> > > This laptop is running Ubuntu Edgy (6.10) and it doesn't autoload.
> > > Everything works fine if I manually load the module with modprobe.
> > > 
> > > This device should match:
> > > 
> > > 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
> > > 00: 86 80 da 27 01 00 80 02 02 00 05 0c 00 00 00 00
> > > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > > 20: a1 18 00 00 00 00 00 00 00 00 00 00 cf 10 88 13
> > > 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00
> > > 
> > > This driver modinfo:
> > > 
> > > filename:       /lib/modules/2.6.20-rc3/kernel/drivers/i2c/busses/i2c-i801.ko
> > 
> > What does:
> > 	modprobe --show-depends `cat /sys/bus/pci/0000:00:1f.3/modalias`
> > show? 
> 
> Greg really means:
> 	modprobe --show-depends `cat /sys/bus/pci/devices/0000:00:1f.3/modalias`
> and same for the other commands below.


Ahak
$ modprobe --show-depends `cat /sys/bus/pci/devices/0000:00:1f.3/modalias`
WARNING: Not loading blacklisted module i2c_i801
FATAL: Module pci:v00008086d000027DAsv000010CFsd00001388bc0Csc05i00 not found.

And the blacklist entry is:

# causes failure to suspend on HP compaq nc6000 (Ubuntu: #10306)
blacklist i2c_i801

Looks like Ubuntu decided to wallpaper over a problem rather than fixing it
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/