| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20070130142717.GA22521@havoc.gtf.org>
Date: Tue, 30 Jan 2007 09:27:18 -0500
From: Jeff Garzik <jeff@...zik.org>
To: Andrew Morton <akpm@...l.org>, Linus Torvalds <torvalds@...l.org>
Cc: linux-ide@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>
Subject: [git patches] libata fixes
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
to receive the following updates:
drivers/ata/ahci.c | 2 +-
drivers/ata/libata-core.c | 2 +-
drivers/ata/libata-eh.c | 2 +-
drivers/ata/libata-scsi.c | 60 +++++++++++++++++++++++++++++++++++--------
drivers/ata/pata_platform.c | 4 ++-
drivers/ata/pata_sil680.c | 2 +-
6 files changed, 56 insertions(+), 16 deletions(-)
Andrew Morton (1):
pata_platform: set_mode fix
David Milburn (1):
libata-scsi: ata_task_ioctl should return ATA registers from sense data
Lennert Buytenhek (1):
ata_if_xfermask() word 51 fix
Robert Hancock (1):
libata: fix translation for START STOP UNIT
Sergei Shtylyov (1):
pata_sil680: PIO1 taskfile transfers overclocking fix (repost)
Tejun Heo (2):
ahci: port_no should be used when clearing IRQ in ahci_thaw()
libata: fix ata_eh_suspend() return value
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 28a82e3..48616c6 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1282,7 +1282,7 @@ static void ahci_thaw(struct ata_port *ap)
/* clear IRQ */
tmp = readl(port_mmio + PORT_IRQ_STAT);
writel(tmp, port_mmio + PORT_IRQ_STAT);
- writel(1 << ap->id, mmio + HOST_IRQ_STAT);
+ writel(1 << ap->port_no, mmio + HOST_IRQ_STAT);
/* turn IRQ back on */
writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index a388a8d..cf70702 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1037,7 +1037,7 @@ static unsigned int ata_id_xfermask(const u16 *id)
* the PIO timing number for the maximum. Turn it into
* a mask.
*/
- u8 mode = id[ATA_ID_OLD_PIO_MODES] & 0xFF;
+ u8 mode = (id[ATA_ID_OLD_PIO_MODES] >> 8) & 0xFF;
if (mode < 5) /* Valid PIO range */
pio_mask = (2 << mode) - 1;
else
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 56cf59b..7484358 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1796,7 +1796,7 @@ static int ata_eh_suspend(struct ata_port *ap, struct ata_device **r_failed_dev)
*r_failed_dev = dev;
DPRINTK("EXIT\n");
- return 0;
+ return rc;
}
/**
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 7cc5a4a..73902d3 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -273,8 +273,8 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
{
int rc = 0;
u8 scsi_cmd[MAX_COMMAND_SIZE];
- u8 args[7];
- struct scsi_sense_hdr sshdr;
+ u8 args[7], *sensebuf = NULL;
+ int cmd_result;
if (arg == NULL)
return -EINVAL;
@@ -282,10 +282,14 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
if (copy_from_user(args, arg, sizeof(args)))
return -EFAULT;
+ sensebuf = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_NOIO);
+ if (!sensebuf)
+ return -ENOMEM;
+
memset(scsi_cmd, 0, sizeof(scsi_cmd));
scsi_cmd[0] = ATA_16;
scsi_cmd[1] = (3 << 1); /* Non-data */
- /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */
+ scsi_cmd[2] = 0x20; /* cc but no off.line or data xfer */
scsi_cmd[4] = args[1];
scsi_cmd[6] = args[2];
scsi_cmd[8] = args[3];
@@ -295,11 +299,46 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
/* Good values for timeout and retries? Values below
from scsi_ioctl_send_command() for default case... */
- if (scsi_execute_req(scsidev, scsi_cmd, DMA_NONE, NULL, 0, &sshdr,
- (10*HZ), 5))
+ cmd_result = scsi_execute(scsidev, scsi_cmd, DMA_NONE, NULL, 0,
+ sensebuf, (10*HZ), 5, 0);
+
+ if (driver_byte(cmd_result) == DRIVER_SENSE) {/* sense data available */
+ u8 *desc = sensebuf + 8;
+ cmd_result &= ~(0xFF<<24); /* DRIVER_SENSE is not an error */
+
+ /* If we set cc then ATA pass-through will cause a
+ * check condition even if no error. Filter that. */
+ if (cmd_result & SAM_STAT_CHECK_CONDITION) {
+ struct scsi_sense_hdr sshdr;
+ scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE,
+ &sshdr);
+ if (sshdr.sense_key==0 &&
+ sshdr.asc==0 && sshdr.ascq==0)
+ cmd_result &= ~SAM_STAT_CHECK_CONDITION;
+ }
+
+ /* Send userspace ATA registers */
+ if (sensebuf[0] == 0x72 && /* format is "descriptor" */
+ desc[0] == 0x09) {/* code is "ATA Descriptor" */
+ args[0] = desc[13]; /* status */
+ args[1] = desc[3]; /* error */
+ args[2] = desc[5]; /* sector count (0:7) */
+ args[3] = desc[7]; /* lbal */
+ args[4] = desc[9]; /* lbam */
+ args[5] = desc[11]; /* lbah */
+ args[6] = desc[12]; /* select */
+ if (copy_to_user(arg, args, sizeof(args)))
+ rc = -EFAULT;
+ }
+ }
+
+ if (cmd_result) {
rc = -EIO;
+ goto error;
+ }
- /* Need code to retrieve data from check condition? */
+ error:
+ kfree(sensebuf);
return rc;
}
@@ -983,11 +1022,10 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc)
}
tf->command = ATA_CMD_VERIFY; /* READ VERIFY */
- } else {
- tf->nsect = 0; /* time period value (0 implies now) */
- tf->command = ATA_CMD_STANDBY;
- /* Consider: ATA STANDBY IMMEDIATE command */
- }
+ } else
+ /* Issue ATA STANDBY IMMEDIATE command */
+ tf->command = ATA_CMD_STANDBYNOW1;
+
/*
* Standby and Idle condition timers could be implemented but that
* would require libata to implement the Power condition mode page
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 443b1d8..ca2999f 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -30,7 +30,8 @@ static int pio_mask = 1;
* Provide our own set_mode() as we don't want to change anything that has
* already been configured..
*/
-static void pata_platform_set_mode(struct ata_port *ap)
+static int pata_platform_set_mode(struct ata_port *ap,
+ struct ata_device **r_failed_dev)
{
int i;
@@ -44,6 +45,7 @@ static void pata_platform_set_mode(struct ata_port *ap)
dev->flags |= ATA_DFLAG_PIO;
}
}
+ return 0;
}
static void pata_platform_host_stop(struct ata_host *host)
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 32cf0bf..e8dfd8f 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -135,7 +135,7 @@ static void sil680_error_handler(struct ata_port *ap)
static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
static u16 speed_p[5] = { 0x328A, 0x2283, 0x1104, 0x10C3, 0x10C1 };
- static u16 speed_t[5] = { 0x328A, 0x1281, 0x1281, 0x10C3, 0x10C1 };
+ static u16 speed_t[5] = { 0x328A, 0x2283, 0x1281, 0x10C3, 0x10C1 };
unsigned long tfaddr = sil680_selreg(ap, 0x02);
unsigned long addr = sil680_seldev(ap, adev, 0x04);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists