linux-kernel - Re: 2.6.20 PCI Cannot allocate resource region 2

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1a297b360702060424m393d66cdka4a446b24cbd1ff@mail.gmail.com>
Date:	Tue, 6 Feb 2007 16:24:57 +0400
From:	"Manu Abraham" <abraham.manu@...il.com>
To:	"Luming Yu" <luming.yu@...il.com>
Cc:	"Grant Grundler" <grundler@...isc-linux.org>,
	"Andrew Morton" <akpm@...ux-foundation.org>,
	linux-kernel@...r.kernel.org, linux-pci@...ey.karlin.mff.cuni.cz,
	greg@...ah.com
Subject: Re: 2.6.20 PCI Cannot allocate resource region 2

On 2/6/07, Luming Yu <luming.yu@...il.com> wrote:
> > dang !
> >
> > rebooted it into 2.6.17.7
> >
> > no errors, during a bootup, BIST isn't running anymore
> > running M$ did change the status from dead to alive ??? shocked !!
>
> Interesting!  does windows driver fixes the broken firmware/flash on this card?


No firmware/flash on the card.


>
> >
> > attached lspci output in the very same setup as earlier, no difference
> > in anything, except that it was rebooted into windows.
> >
> > the PCI config dump would help ?
> >
>
> I guess you would never reproduce this issue again unless you can
> restore the broken firmware/flash on this card. :-)
>

none on the card, a flash or a firmware .. it has a 24c02 EEPROM for
vendor information, that's all


regards,
manu
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/