| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1a297b360702060456n654c976fycb8fcb37012c6212@mail.gmail.com> Date: Tue, 6 Feb 2007 16:56:13 +0400 From: "Manu Abraham" <abraham.manu@...il.com> To: "Luming Yu" <luming.yu@...il.com> Cc: "Grant Grundler" <grundler@...isc-linux.org>, "Andrew Morton" <akpm@...ux-foundation.org>, linux-kernel@...r.kernel.org, linux-pci@...ey.karlin.mff.cuni.cz, greg@...ah.com Subject: Re: 2.6.20 PCI Cannot allocate resource region 2 On 2/6/07, Manu Abraham <abraham.manu@...il.com> wrote: > On 2/6/07, Luming Yu <luming.yu@...il.com> wrote: > > > dang ! > > > > > > rebooted it into 2.6.17.7 > > > > > > no errors, during a bootup, BIST isn't running anymore > > > running M$ did change the status from dead to alive ??? shocked !! > > > > Interesting! does windows driver fixes the broken firmware/flash on this card? > > > No firmware/flash on the card. > > > > > > > > > > attached lspci output in the very same setup as earlier, no difference > > > in anything, except that it was rebooted into windows. > > > > > > the PCI config dump would help ? > > > > > > > I guess you would never reproduce this issue again unless you can > > restore the broken firmware/flash on this card. :-) > > > > none on the card, a flash or a firmware .. it has a 24c02 EEPROM for > vendor information, that's all > You can see the same from this picture regards, manu - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists