[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1a297b360702060456t381b2b2fobfaebac95e1e0ccd@mail.gmail.com>
Date: Tue, 6 Feb 2007 16:56:40 +0400
From: "Manu Abraham" <abraham.manu@...il.com>
To: "Luming Yu" <luming.yu@...il.com>
Cc: "Grant Grundler" <grundler@...isc-linux.org>,
"Andrew Morton" <akpm@...ux-foundation.org>,
linux-kernel@...r.kernel.org, linux-pci@...ey.karlin.mff.cuni.cz,
greg@...ah.com
Subject: Re: 2.6.20 PCI Cannot allocate resource region 2
On 2/6/07, Manu Abraham <abraham.manu@...il.com> wrote:
> On 2/6/07, Manu Abraham <abraham.manu@...il.com> wrote:
> > On 2/6/07, Luming Yu <luming.yu@...il.com> wrote:
> > > > dang !
> > > >
> > > > rebooted it into 2.6.17.7
> > > >
> > > > no errors, during a bootup, BIST isn't running anymore
> > > > running M$ did change the status from dead to alive ??? shocked !!
> > >
> > > Interesting! does windows driver fixes the broken firmware/flash on this card?
> >
> >
> > No firmware/flash on the card.
> >
> >
> > >
> > > >
> > > > attached lspci output in the very same setup as earlier, no difference
> > > > in anything, except that it was rebooted into windows.
> > > >
> > > > the PCI config dump would help ?
> > > >
> > >
> > > I guess you would never reproduce this issue again unless you can
> > > restore the broken firmware/flash on this card. :-)
> > >
> >
> > none on the card, a flash or a firmware .. it has a 24c02 EEPROM for
> > vendor information, that's all
> >
>
> You can see the same from this picture
http://abraham.manu.googlepages.com/p3130016.jpg
>
> regards,
> manu
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists