[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20070307164329.752993ff@lxorguk.ukuu.org.uk>
Date: Wed, 7 Mar 2007 16:43:29 +0000
From: Alan Cox <alan@...rguk.ukuu.org.uk>
To: akpm@...l.org, jgarzik@...ox.com, linux-ide@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH] pata_cmd640: Multiple updates
Add suspend/resume support
Write 0x5B to 0 not 0x5C
The former is important as we must kill the FIFO on a resume
Signed-off-by: Alan Cox <alan@...hat.com>
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.21-rc2-mm2/drivers/ata/pata_cmd640.c linux-2.6.21-rc2-mm2/drivers/ata/pata_cmd640.c
--- linux.vanilla-2.6.21-rc2-mm2/drivers/ata/pata_cmd640.c 2007-03-06 23:09:46.000000000 +0000
+++ linux-2.6.21-rc2-mm2/drivers/ata/pata_cmd640.c 2007-03-06 23:52:21.000000000 +0000
@@ -23,7 +23,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_cmd640"
-#define DRV_VERSION "0.0.3"
+#define DRV_VERSION "0.0.5"
struct cmd640_reg {
int last;
@@ -43,6 +43,7 @@
/**
* cmd640_set_piomode - set initial PIO mode data
+ * @ap: ATA port
* @adev: ATA device
*
* Called to do the PIO mode setup.
@@ -106,7 +107,7 @@
pci_write_config_byte(pdev, arttim + 1, (t.active << 4) | t.recover);
} else {
/* Save the shared timings for channel, they will be loaded
- by qc_issue_prot. Reloading the setup time is expensive
+ by qc_issue_prot. Reloading the setup time is expensive
so we keep a merged one loaded */
pci_read_config_byte(pdev, ARTIM23, ®);
reg &= 0x3F;
@@ -219,30 +220,21 @@
.port_start = cmd640_port_start,
};
-static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+static void cmd640_hardware_init(struct pci_dev *pdev)
{
u8 r;
u8 ctrl;
- static struct ata_port_info info = {
- .sht = &cmd640_sht,
- .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
- .pio_mask = 0x1f,
- .port_ops = &cmd640_port_ops
- };
-
- static struct ata_port_info *port_info[2] = { &info, &info };
-
/* CMD640 detected, commiserations */
- pci_write_config_byte(pdev, 0x5C, 0x00);
+ pci_write_config_byte(pdev, 0x5B, 0x00);
/* Get version info */
pci_read_config_byte(pdev, CFR, &r);
/* PIO0 command cycles */
pci_write_config_byte(pdev, CMDTIM, 0);
/* 512 byte bursts (sector) */
pci_write_config_byte(pdev, BRST, 0x40);
- /*
- * A reporter a long time ago
+ /*
+ * A reporter a long time ago
* Had problems with the data fifo
* So don't run the risk
* Of putting crap on the disk
@@ -255,12 +247,26 @@
pci_read_config_byte(pdev, ARTIM23, &ctrl);
ctrl |= 0x0C;
pci_write_config_byte(pdev, ARTIM23, ctrl);
+}
+
+static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ static struct ata_port_info info = {
+ .sht = &cmd640_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .pio_mask = 0x1f,
+ .port_ops = &cmd640_port_ops
+ };
+
+ static struct ata_port_info *port_info[2] = { &info, &info };
+ cmd640_hardware_init(pdev);
return ata_pci_init_one(pdev, port_info, 2);
}
static int cmd640_reinit_one(struct pci_dev *pdev)
{
+ cmd640_hardware_init(pdev);
return ata_pci_device_resume(pdev);
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists