linux-kernel - RE: MPT Fusion LSI22320 , Domain validation loops .

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <664A4EBB07F29743873A87CF62C26D70650FD9@NAMAIL4.ad.lsil.com>
Date:	Mon, 19 Mar 2007 20:16:18 -0600
From:	"Moore, Eric" <Eric.Moore@....com>
To:	"Mr. James W. Laferriere" <babydr@...y-dragons.com>,
	"Linux Kernel Maillist" <linux-kernel@...r.kernel.org>,
	<linux-scsi@...r.kernel.org>, <James.Bottomley@...elEye.com>
Subject: RE: MPT Fusion LSI22320 ,  Domain validation loops .

On Saturday, March 17, 2007 2:33 PM,  James W. Laferriere wrote:
>  	Hello All ,  I am have been having this problem since I 
> purchased the 
> controller and after changing out the disks I thought were 
> the problem .
>  	I am still getting the continous :
> 
> mptscsih: ioc1: attempting task abort! (sc=f7a64500)
> scsi 3:0:4:0:
>          command: Inquiry: 12 00 00 00 60 00
> mptbase: Initiating ioc1 recovery
> mptscsih: ioc1: task abort: SUCCESS (sc=f7a64500)
>   target3:0:4: Domain Validation detected failure, dropping back
>   target3:0:4: Domain Validation skipping write tests
>   target3:0:4: Ending Domain Validation
>   target3:0:4: asynchronous
>   target3:0:5: Beginning Domain Validation
> mptscsih: ioc0: attempting target reset! (sc=f7a64380)
> 
>  	The acutual device id's change and the driver 
> continously resets the 
> busses & starts all over .
> 
>  	The disks are in a HP DS-SL13R-BA 4354R 14drive ultra3 
> racKmount cabinet 
> w/ dualbus & dualps ,  Which seems to present a ID6 ,  That 
> does not show up in 
> any of the bus scans .
> 
>  	Now I have previously had the same cabinet with 18gb 
> disks which had the 
> same problem with this controller .  BUT I also have a LSI 
> Logic / Symbios 
> Logic 53c1010 66MHz Ultra3 dual SCSI bus Adapter which works 
> flawlessly with the 
> 18gb disks in this very same cabinet .
>  	The cables for connecting the adapter(s) to tha cabinet 
> are less than 24 
> inches in length .
> 
>  	Would anyone please shed some light on what it is I am 
> doing wrong or 
> need to do or ....?  Too have this controller recognise these 
> disk drives in 
> this cabinet .

There is a seperate mailing list for scsi releated issues, e.g.
linux-scsi@.   I've posted a patch to address your issue several times,
however it seems its not been picked up by the scsi subsystem
maintainer.   The last time it was posted was here:
http://marc.info/?l=linux-scsi&m=117089244809072&w=2   An alternative is
you could obtain our latest drivers from the LSI download site, where
these drivers should have this patch
http://www.lsilogic.com/cm/DownloadSearch.do.

Eric


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/