| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20070323112411.f6a8a762.randy.dunlap@oracle.com>
Date: Fri, 23 Mar 2007 11:24:11 -0700
From: Randy Dunlap <randy.dunlap@...cle.com>
To: Alan Cox <alan@...rguk.ukuu.org.uk>
Cc: linux-kernel@...r.kernel.org, linux-ide@...r.kernel.org,
kyle@...onical.com
Subject: Re: HPA patches
On Fri, 23 Mar 2007 19:13:21 +0000 Alan Cox wrote:
> For reference this is what I am currently using with 2.6.21-rc4-mm1 and
> it is working for all my test cases so far: Its basically Kyle's patch
> with a libata switch to turn it on/off and some minor fixups from
> the original patch as posted
>
> diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.21-rc4-mm1/drivers/ata/libata-core.c linux-2.6.21-rc4-mm1/drivers/ata/libata-core.c
> --- linux.vanilla-2.6.21-rc4-mm1/drivers/ata/libata-core.c 2007-03-23 11:49:49.000000000 +0000
> +++ linux-2.6.21-rc4-mm1/drivers/ata/libata-core.c 2007-03-23 13:05:15.000000000 +0000
> @@ -89,6 +89,10 @@
> module_param_named(fua, libata_fua, int, 0444);
> MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)");
>
> +static int ata_ignore_hpa = 0;
Don't init to 0. Not needed, bloats binary files.
> +module_param_named(ignore_hpa, ata_ignore_hpa, int, 0644);
> +MODULE_PARM_DESC(ignore_hpa, "Ignore HPA (0=off 1=on)");
So 1 = on = ignore, right?
> +
> static int ata_probe_timeout = ATA_TMOUT_INTERNAL / HZ;
> module_param(ata_probe_timeout, int, 0444);
> MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)");
> @@ -808,6 +812,202 @@
> *p = '\0';
> }
>
> +
> +/**
> + * ata_read_native_max_address_ext - LBA48 native max query
> + * @dev: Device to query
> + *
> + * Performa an LBA48 size query upon the device in question. Return the
Perform
> + * actual LBA48 size or zero if the command fails.
> + */
> +
> +static u64 ata_read_native_max_address_ext(struct ata_device *dev)
> +{
> + unsigned int err;
> + struct ata_taskfile tf;
> +
> + ata_tf_init(dev, &tf);
> +
> + tf.command = ATA_CMD_READ_NATIVE_MAX_EXT;
> + tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48 | ATA_TFLAG_ISADDR;
> + tf.protocol |= ATA_PROT_NODATA;
> + tf.device = 0x40;
What is 0x40? can it be #defined (or enum-ed) instead of a magic
value? please? (more of same below)
> +
> + err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0);
> + if (err)
> + return 0;
> +
> + return ata_tf_to_lba48(&tf);
> +}
> +
> +/**
> + * ata_read_native_max_address - LBA28 native max query
> + * @dev: Device to query
> + *
> + * Performa an LBA28 size query upon the device in question. Return the
Perform
> + * actual LBA28 size or zero if the command fails.
> + */
> +
> +static u64 ata_read_native_max_address(struct ata_device *dev)
> +{
> + unsigned int err;
> + struct ata_taskfile tf;
> +
> + ata_tf_init(dev, &tf);
> +
> + tf.command = ATA_CMD_READ_NATIVE_MAX;
> + tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
> + tf.protocol |= ATA_PROT_NODATA;
> + tf.device = 0x40;
> +
> + err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0);
> + if (err)
> + return 0;
> +
> + return ata_tf_to_lba(&tf);
> +}
> +
> +/**
> + * ata_set_native_max_address_ext - LBA48 native max set
> + * @dev: Device to query
> + *
> + * Perform an LBA48 size set max upon the device in question. Return the
> + * actual LBA48 size or zero if the command fails.
> + */
> +
> +static u64 ata_set_native_max_address_ext(struct ata_device *dev, u64 new_sectors)
> +{
...
> +}
> +
> +/**
> + * ata_set_native_max_address - LBA28 native max set
> + * @dev: Device to query
> + *
> + * Perform an LBA28 size set max upon the device in question. Return the
> + * actual LBA28 size or zero if the command fails.
> + */
> +
> +static u64 ata_set_native_max_address(struct ata_device *dev, u64 new_sectors)
> +{
...
> +}
> +
> +/**
> + * ata_hpa_resize - Resize a device with an HPA set
> + * @dev: Device to resize
> + *
> + * Read the size of an LBA28 or LBA48 disk with HPA features and resize
> + * it if required to the full size of the media. The caller must check
> + * the drive has the HPA feature set enabled.
> + */
> +
> +static u64 ata_hpa_resize(struct ata_device *dev)
> +{
> + u64 sectors = dev->n_sectors;
> + u64 hpa_sectors;
> +
> + if (ata_id_has_lba48(dev->id))
> + hpa_sectors = ata_read_native_max_address_ext(dev);
> + else
> + hpa_sectors = ata_read_native_max_address(dev);
> +
> + /* if no hpa, both should be equal */
> + ata_dev_printk(dev, KERN_INFO, "%s 1: sectors = %lld, hpa_sectors = %lld\n",
> + __FUNCTION__, sectors, hpa_sectors);
(long long) or (unsigned long long) on sectors and hpa_sectors...
> +
> + if (hpa_sectors > sectors) {
> + ata_dev_printk(dev, KERN_INFO,
> + "Host Protected Area detected:\n"
> + "\tcurrent size: %lld sectors\n"
> + "\tnative size: %lld sectors\n",
> + sectors, hpa_sectors);
printk format types ok?
> +
> + if (ata_ignore_hpa) {
> + if (ata_id_has_lba48(dev->id))
> + hpa_sectors = ata_set_native_max_address_ext(dev, hpa_sectors);
> + else
> + hpa_sectors = ata_set_native_max_address(dev, hpa_sectors);
> +
> + if (hpa_sectors) {
> + ata_dev_printk(dev, KERN_INFO,
> + "native size increased to %lld sectors\n", hpa_sectors);
Line lengths < 80 and printk format types?
> + return hpa_sectors;
> + }
> + }
> + }
> + return sectors;
> +}
> +
> static u64 ata_id_n_sectors(const u16 *id)
> {
> if (ata_id_has_lba(id)) {
> @@ -1658,6 +1858,7 @@
> snprintf(revbuf, 7, "ATA-%d", ata_id_major_version(id));
>
> dev->n_sectors = ata_id_n_sectors(id);
> + dev->n_sectors_boot = dev->n_sectors;
>
> /* SCSI only uses 4-char revisions, dump full 8 chars from ATA */
> ata_id_c_string(dev->id, fwrevbuf, ATA_ID_FW_REV,
> @@ -1684,6 +1885,9 @@
> dev->flags |= ATA_DFLAG_FLUSH_EXT;
> }
>
> + if (ata_id_hpa_enabled(dev->id))
> + dev->n_sectors = ata_hpa_resize(dev);
> +
> /* config NCQ */
> ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc));
>
> @@ -3384,6 +3595,11 @@
> "%llu != %llu\n",
> (unsigned long long)dev->n_sectors,
> (unsigned long long)new_n_sectors);
> + /* Are we the boot time size - if so we appear to be the
> + same disk at this point and our HPA got reapplied */
> + if (ata_ignore_hpa && dev->n_sectors_boot == new_n_sectors
> + && ata_id_hpa_enabled(new_id))
> + return 1;
> return 0;
> }
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists