| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Pine.LNX.4.61.0704102316160.32056@yvahk01.tjqt.qr> Date: Tue, 10 Apr 2007 23:17:15 +0200 (MEST) From: Jan Engelhardt <jengelh@...ux01.gwdg.de> To: Ben Collins <bcollins@...ian.org>, Stefan Richter <stefanr@...6.in-berlin.de> cc: linux1394-devel@...ts.sourceforge.net, Linux Kernel Mailing List <linux-kernel@...r.kernel.org> Subject: [PATCH 13/30] Use menuconfig objects - IEEE1394 Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@....de> Index: linux-2.6.21-rc5/drivers/ieee1394/Kconfig =================================================================== --- linux-2.6.21-rc5.orig/drivers/ieee1394/Kconfig +++ linux-2.6.21-rc5/drivers/ieee1394/Kconfig @@ -1,8 +1,6 @@ # -*- shell-script -*- -menu "IEEE 1394 (FireWire) support" - -config IEEE1394 +menuconfig IEEE1394 tristate "IEEE 1394 (FireWire) support" depends on PCI || BROKEN select NET @@ -19,12 +17,12 @@ config IEEE1394 To compile this driver as a module, say M here: the module will be called ieee1394. +if IEEE1394 + comment "Subsystem Options" - depends on IEEE1394 config IEEE1394_VERBOSEDEBUG bool "Excessive debugging output" - depends on IEEE1394 help If you say Y here, you will get very verbose debugging logs from the subsystem which includes a dump of the header of every sent @@ -37,7 +35,6 @@ config IEEE1394_VERBOSEDEBUG config IEEE1394_EXTRA_CONFIG_ROMS bool "Build in extra config rom entries for certain functionality" - depends on IEEE1394 help Some IEEE1394 functionality depends on extra config rom entries being available in the host adapters CSR. These options will @@ -45,7 +42,7 @@ config IEEE1394_EXTRA_CONFIG_ROMS config IEEE1394_CONFIG_ROM_IP1394 bool "IP-1394 Entry" - depends on IEEE1394_EXTRA_CONFIG_ROMS && IEEE1394 + depends on IEEE1394_EXTRA_CONFIG_ROMS help Adds an entry for using IP-over-1394. If you want to use your IEEE1394 bus as a network for IP systems (including interacting @@ -53,14 +50,13 @@ config IEEE1394_CONFIG_ROM_IP1394 eth1394 option below. comment "Device Drivers" - depends on IEEE1394 comment "Texas Instruments PCILynx requires I2C" - depends on IEEE1394 && I2C=n + depends on I2C=n config IEEE1394_PCILYNX tristate "Texas Instruments PCILynx support" - depends on PCI && IEEE1394 && I2C + depends on PCI && I2C select I2C_ALGOBIT help Say Y here if you have an IEEE-1394 controller with the Texas @@ -72,7 +68,7 @@ config IEEE1394_PCILYNX config IEEE1394_OHCI1394 tristate "OHCI-1394 support" - depends on PCI && IEEE1394 + depends on PCI help Enable this driver if you have an IEEE 1394 controller based on the OHCI-1394 specification. The current driver is only tested with OHCI @@ -84,22 +80,21 @@ config IEEE1394_OHCI1394 module will be called ohci1394. comment "Protocol Drivers" - depends on IEEE1394 config IEEE1394_VIDEO1394 tristate "OHCI-1394 Video support" - depends on IEEE1394 && IEEE1394_OHCI1394 + depends on IEEE1394_OHCI1394 help This option enables video device usage for OHCI-1394 cards. Enable this option only if you have an IEEE 1394 video device connected to an OHCI-1394 card. comment "SBP-2 support (for storage devices) requires SCSI" - depends on IEEE1394 && SCSI=n + depends on SCSI=n config IEEE1394_SBP2 tristate "SBP-2 support (Harddisks etc.)" - depends on IEEE1394 && SCSI + depends on SCSI help This option enables you to use SBP-2 devices connected to an IEEE 1394 bus. SBP-2 devices include storage devices like harddisks and @@ -110,7 +105,7 @@ config IEEE1394_SBP2 config IEEE1394_SBP2_PHYS_DMA bool "Enable replacement for physical DMA in SBP2" - depends on IEEE1394 && IEEE1394_SBP2 && EXPERIMENTAL && (X86_32 || PPC_32) + depends on IEEE1394_SBP2 && EXPERIMENTAL && (X86_32 || PPC_32) help This builds sbp2 for use with non-OHCI host adapters which do not support physical DMA or for when ohci1394 is run with phys_dma=0. @@ -123,7 +118,7 @@ config IEEE1394_SBP2_PHYS_DMA config IEEE1394_ETH1394 tristate "Ethernet over 1394" - depends on IEEE1394 && EXPERIMENTAL && INET + depends on EXPERIMENTAL && INET select IEEE1394_CONFIG_ROM_IP1394 select IEEE1394_EXTRA_CONFIG_ROMS help @@ -136,7 +131,7 @@ config IEEE1394_ETH1394 config IEEE1394_DV1394 tristate "OHCI-DV I/O support (deprecated)" - depends on IEEE1394 && IEEE1394_OHCI1394 + depends on IEEE1394_OHCI1394 help The dv1394 driver will be removed from Linux in a future release. Its functionality is now provided by raw1394 together with libraries @@ -144,7 +139,6 @@ config IEEE1394_DV1394 config IEEE1394_RAWIO tristate "Raw IEEE1394 I/O support" - depends on IEEE1394 help Say Y here if you want support for the raw device. This is generally a good idea, so you should say Y here. The raw device enables @@ -154,4 +148,4 @@ config IEEE1394_RAWIO To compile this driver as a module, say M here: the module will be called raw1394. -endmenu +endif # IEEE1394 #<EOF> - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists