[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <46259E18.6010003@zytor.com>
Date: Tue, 17 Apr 2007 21:27:04 -0700
From: "H. Peter Anvin" <hpa@...or.com>
To: Gene Heskett <gene.heskett@...il.com>
CC: lkml <linux-kernel@...r.kernel.org>, Alain.Knaff@...oxes.com
Subject: Re: floppy.ko
Gene Heskett wrote:
> On Tuesday 17 April 2007, H. Peter Anvin wrote:
>> Gene Heskett wrote:
>>> I have the usual fd0, a 3.5" 1.44 drive, and fd1, a 5.25" 720k drive in
>>> this machine, both are enabled in the bios with the correct types being
>>> set there.
>> A 5.25" 720k drive?! That's not a PC standard drive -- 5.25" came in
>> 180K, 360K and 1200K varieties, whereas 3.5" came in 720K, 1440K and
>> 2880K varieties (not including superfloppies.)
>>
>> -hpa
>
> It sure is a std drive, Peter, although many of the later ones that were set
> up as 1.2 megger's by the pc crowd who have access to a 500 kilobaud
> controller, could have the 360 rpm spindle jumper'd back to 300 rpm, and when
> fed with a 250 kilobaud controller (WD177x/277x/279x family, which includes
> the Fujitsu MB8877), they are perfect 720k devices and are spec'ed that way
> by the makers. Many of the older full height Tandon 100-4's could also step
> quite a few tracks closer to the spindle & I ran them as 765k drives by using
> 84 tracks. I even have a chinon that will make 86 tracks most of the time.
>
> These were all quite common in the middle '80's. Before your time I suspect.
>
I know they were quite common, but they were not a standard *PC*
accessory. (FWIW, 1200K PC drives could also read/write 720K, which
allowed you to use non-HD-rated media.)
(And no, this wasn't "before my time".)
-hpa
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists