| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20070511220501.02181278.kernel1@cyberdogtech.com>
Date: Fri, 11 May 2007 22:05:01 -0400
From: Matt LaPlante <kernel1@...erdogtech.com>
To: linux-kernel@...r.kernel.org
Cc: trivial@...nel.org
Subject: [PATCH] 2.6.21-git15 - Kconfig Cleanup
Fix misc small issues/typos/grammar in Kconfigs for 2.6.21-git15.
Signed-off-by: Matt LaPlante <kernel1@...erdogtech.com>
--
diff -ru a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
--- a/arch/arm/plat-s3c24xx/Kconfig 2007-04-25 23:08:32.000000000 -0400
+++ b/arch/arm/plat-s3c24xx/Kconfig 2007-05-11 21:44:06.000000000 -0400
@@ -70,7 +70,7 @@
help
Set the chunksize in Kilobytes of the CRC for checking memory
corruption over suspend and resume. A smaller value will mean that
- the CRC data block will take more memory, but wil identify any
+ the CRC data block will take more memory, but will identify any
faults with better precision.
See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
diff -ru a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
--- a/arch/blackfin/Kconfig 2007-05-11 20:32:24.000000000 -0400
+++ b/arch/blackfin/Kconfig 2007-05-11 21:33:28.000000000 -0400
@@ -435,100 +435,100 @@
default y
help
If enabled interrupt entry code (STORE/RESTORE CONTEXT) is linked
- into L1 instruction memory.(less latency)
+ into L1 instruction memory. (less latency)
config EXCPT_IRQ_SYSC_L1
- bool "Locate entire ASM lowlevel excepetion / interrupt - Syscall and CPLB handler code in L1 Memory"
+ bool "Locate entire ASM lowlevel exception / interrupt - Syscall and CPLB handler code in L1 Memory"
default y
help
- If enabled entire ASM lowlevel exception and interrupt entry code (STORE/RESTORE CONTEXT) is linked
- into L1 instruction memory.(less latency)
+ If enabled, the entire ASM lowlevel exception and interrupt entry code
+ (STORE/RESTORE CONTEXT) is linked into L1 instruction memory. (less latency)
config DO_IRQ_L1
bool "Locate frequently called do_irq dispatcher function in L1 Memory"
default y
help
- If enabled frequently called do_irq dispatcher function is linked
- into L1 instruction memory.(less latency)
+ If enabled, the frequently called do_irq dispatcher function is linked
+ into L1 instruction memory. (less latency)
config CORE_TIMER_IRQ_L1
bool "Locate frequently called timer_interrupt() function in L1 Memory"
default y
help
- If enabled frequently called timer_interrupt() function is linked
- into L1 instruction memory.(less latency)
+ If enabled, the frequently called timer_interrupt() function is linked
+ into L1 instruction memory. (less latency)
config IDLE_L1
bool "Locate frequently idle function in L1 Memory"
default y
help
- If enabled frequently called idle function is linked
- into L1 instruction memory.(less latency)
+ If enabled, the frequently called idle function is linked
+ into L1 instruction memory. (less latency)
config SCHEDULE_L1
bool "Locate kernel schedule function in L1 Memory"
default y
help
- If enabled frequently called kernel schedule is linked
- into L1 instruction memory.(less latency)
+ If enabled, the frequently called kernel schedule is linked
+ into L1 instruction memory. (less latency)
config ARITHMETIC_OPS_L1
bool "Locate kernel owned arithmetic functions in L1 Memory"
default y
help
If enabled arithmetic functions are linked
- into L1 instruction memory.(less latency)
+ into L1 instruction memory. (less latency)
config ACCESS_OK_L1
bool "Locate access_ok function in L1 Memory"
default y
help
- If enabled access_ok function is linked
- into L1 instruction memory.(less latency)
+ If enabled, the access_ok function is linked
+ into L1 instruction memory. (less latency)
config MEMSET_L1
bool "Locate memset function in L1 Memory"
default y
help
- If enabled memset function is linked
- into L1 instruction memory.(less latency)
+ If enabled, the memset function is linked
+ into L1 instruction memory. (less latency)
config MEMCPY_L1
bool "Locate memcpy function in L1 Memory"
default y
help
- If enabled memcpy function is linked
- into L1 instruction memory.(less latency)
+ If enabled, the memcpy function is linked
+ into L1 instruction memory. (less latency)
config SYS_BFIN_SPINLOCK_L1
bool "Locate sys_bfin_spinlock function in L1 Memory"
default y
help
- If enabled sys_bfin_spinlock function is linked
- into L1 instruction memory.(less latency)
+ If enabled, the sys_bfin_spinlock function is linked
+ into L1 instruction memory. (less latency)
config IP_CHECKSUM_L1
bool "Locate IP Checksum function in L1 Memory"
default n
help
- If enabled IP Checksum function is linked
- into L1 instruction memory.(less latency)
+ If enabled, the IP Checksum function is linked
+ into L1 instruction memory. (less latency)
config CACHELINE_ALIGNED_L1
bool "Locate cacheline_aligned data to L1 Data Memory"
default y
depends on !BF531
help
- If enabled cacheline_anligned data is linked
- into L1 data memory.(less latency)
+ If enabled, the cacheline_aligned data is linked
+ into L1 data memory. (less latency)
config SYSCALL_TAB_L1
bool "Locate Syscall Table L1 Data Memory"
default n
depends on !BF531
help
- If enabled the Syscall LUT is linked
- into L1 data memory.(less latency)
+ If enabled, the the Syscall LUT is linked
+ into L1 data memory. (less latency)
config CPLB_SWITCH_TAB_L1
bool "Locate CPLB Switch Tables L1 Data Memory"
@@ -536,7 +536,7 @@
depends on !BF531
help
If enabled the CPLB Switch Tables are linked
- into L1 data memory.(less latency)
+ into L1 data memory. (less latency)
endmenu
@@ -905,13 +905,13 @@
from.
config DEBUG_ICACHE_CHECK
- bool "Check Instruction cache coherancy"
+ bool "Check Instruction cache coherency"
depends on DEBUG_KERNEL
depends on DEBUG_HWERR
help
- Say Y here if you are getting wierd unexplained errors. This will
- ensure that icache is what SDRAM says it should be, by doing a
- byte wise comparision between SDRAM and instruction cache. This
+ Say Y here if you are getting weird unexplained errors. This will
+ ensure that icache is what SDRAM says it should be by doing a
+ byte wise comparison between SDRAM and instruction cache. This
also relocates the irq_panic() function to L1 memory, (which is
un-cached).
@@ -921,7 +921,7 @@
help
Say Y here to put in an mini-execption handler before the kernel
replaces the bootloader exception handler. This will stop kernels
- from dieing at startup with no visible error messages.
+ from dying at startup with no visible error messages.
config DEBUG_SERIAL_EARLY_INIT
bool "Initialize serial driver early"
@@ -930,8 +930,8 @@
help
Say Y here if you want to get kernel output early when kernel
crashes before the normal console initialization. If this option
- is enable, console output will always go to the ttyBF0, no matter
- what kernel boot paramters you set.
+ is enabled, console output will always go to the ttyBF0, no matter
+ what kernel boot parameters you set.
config DEBUG_HUNT_FOR_ZERO
bool "Catch NULL pointer reads/writes"
diff -ru a/arch/cris/arch-v10/Kconfig b/arch/cris/arch-v10/Kconfig
--- a/arch/cris/arch-v10/Kconfig 2007-04-25 23:08:32.000000000 -0400
+++ b/arch/cris/arch-v10/Kconfig 2007-05-11 20:59:17.000000000 -0400
@@ -182,7 +182,7 @@
set this to same as CONFIG_ETRAX_LED1G (normally 2).
config ETRAX_LED8Y
- int "Eigth yellow LED bit"
+ int "Eighth yellow LED bit"
depends on ETRAX_CSP0_LEDS
default "2"
help
diff -ru a/arch/ia64/Kconfig b/arch/ia64/Kconfig
--- a/arch/ia64/Kconfig 2007-05-11 20:32:25.000000000 -0400
+++ b/arch/ia64/Kconfig 2007-05-11 21:40:23.000000000 -0400
@@ -442,9 +442,9 @@
config IA64_MC_ERR_INJECT
tristate "MC error injection support"
help
- Selets whether support for MC error injection. By enabling the
- support, kernel provide sysfs interface for user application to
- call MC error injection PAL procedure to inject various errors.
+ Adds support for MC error injection. If enabled, the kernel
+ will provide a sysfs interface for user applications to
+ call MC error injection PAL procedures to inject various errors.
This is a useful tool for MCA testing.
If you're unsure, do not select this option.
@@ -471,7 +471,7 @@
but it is independent of the system firmware. And like a reboot
you can start any kernel with it, not just Linux.
- The name comes from the similiarity to the exec system call.
+ The name comes from the similarity to the exec system call.
It is an ongoing process to be certain the hardware in a machine
is properly shutdown, so do not be surprised if this code does not
diff -ru a/arch/mips/Kconfig b/arch/mips/Kconfig
--- a/arch/mips/Kconfig 2007-05-11 20:32:29.000000000 -0400
+++ b/arch/mips/Kconfig 2007-05-11 21:20:49.000000000 -0400
@@ -748,8 +748,8 @@
This is useful for kernel debugging when your machine crashes very
early before the console code is initialized. For normal operation
- it is not recommended because it looks on some machines ugly and
- oesn't cooperate with an X server. You should normally N here,
+ it is not recommended because it looks ugly on some machines and
+ doesn't cooperate with an X server. You should normally say N here,
unless you want to debug such a crash.
config SYS_HAS_EARLY_PRINTK
@@ -1749,7 +1749,7 @@
but it is independent of the system firmware. And like a reboot
you can start any kernel with it, not just Linux.
- The name comes from the similiarity to the exec system call.
+ The name comes from the similarity to the exec system call.
It is an ongoing process to be certain the hardware in a machine
is properly shutdown, so do not be surprised if this code does not
diff -ru a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
--- a/arch/powerpc/platforms/Kconfig 2007-05-11 20:32:30.000000000 -0400
+++ b/arch/powerpc/platforms/Kconfig 2007-05-11 21:30:35.000000000 -0400
@@ -108,7 +108,7 @@
depends PPC_IBM_CELL_BLADE
help
PMI (Platform Management Interrupt) is a way to
- communicate with the BMC (Baseboard Mangement Controller).
+ communicate with the BMC (Baseboard Management Controller).
It is used in some IBM Cell blades.
default m
diff -ru a/arch/um/Kconfig b/arch/um/Kconfig
--- a/arch/um/Kconfig 2007-05-11 20:32:32.000000000 -0400
+++ b/arch/um/Kconfig 2007-05-11 21:41:30.000000000 -0400
@@ -3,7 +3,7 @@
option defconfig_list
default "arch/$ARCH/defconfig"
-# UML uses the generic IRQ sugsystem
+# UML uses the generic IRQ subsystem
config GENERIC_HARDIRQS
bool
default y
diff -ru a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
--- a/drivers/i2c/busses/Kconfig 2007-05-11 20:32:43.000000000 -0400
+++ b/drivers/i2c/busses/Kconfig 2007-05-11 21:36:01.000000000 -0400
@@ -258,7 +258,7 @@
depends on ARCH_IXP2000
select I2C_ALGOBIT
help
- Say Y here if you have an Intel IXP2000(2400, 2800, 2850) based
+ Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based
system and are using GPIO lines for an I2C bus.
This support is also available as a module. If so, the module
@@ -273,8 +273,8 @@
default y
help
This exposes the various PowerMac i2c interfaces to the linux i2c
- layer and to userland. It is used by various drivers on the powemac
- platform, thus should generally be enabled.
+ layer and to userland. It is used by various drivers on the PowerMac
+ platform, and should generally be enabled.
This support is also available as a module. If so, the module
will be called i2c-powermac.
@@ -423,12 +423,12 @@
tristate "Simtec Generic I2C interface"
select I2C_ALGOBIT
help
- If you say yes to this option, support will be inclyded for
+ If you say yes to this option, support will be included for
the Simtec Generic I2C interface. This driver is for the
simple I2C bus used on newer Simtec products for general
I2C, such as DDC on the Simtec BBD2016A.
- This driver can also be build as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called i2c-simtec.
config SCx200_I2C
diff -ru a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
--- a/drivers/mfd/Kconfig 2007-05-11 20:32:56.000000000 -0400
+++ b/drivers/mfd/Kconfig 2007-05-11 20:50:59.000000000 -0400
@@ -10,8 +10,8 @@
---help---
This is the core driver for the Silicon Motion SM501 multimedia
companion chip. This device is a multifunction device which may
- provide numerous interfaces including USB host controller USB gadget,
- Asyncronous Serial ports, Audio functions and a dual display video
+ provide numerous interfaces including USB host controller, USB gadget,
+ asynchronous serial ports, audio functions, and a dual display video
interface. The device may be connected by PCI or local bus with
varying functions enabled.
diff -ru a/drivers/misc/Kconfig b/drivers/misc/Kconfig
--- a/drivers/misc/Kconfig 2007-05-11 20:32:56.000000000 -0400
+++ b/drivers/misc/Kconfig 2007-05-11 21:03:35.000000000 -0400
@@ -148,7 +148,7 @@
For more information about this driver see
<file:Documentation/thinkpad-acpi.txt> and <http://ibm-acpi.sf.net/> .
- This driver was formely known as ibm-acpi.
+ This driver was formerly known as ibm-acpi.
If you have an IBM or Lenovo ThinkPad laptop, say Y or M here.
@@ -182,7 +182,7 @@
default y
---help---
Allows the thinkpad_acpi driver to handle removable bays. It will
- eletrically disable the device in the bay, and also generate
+ electrically disable the device in the bay, and also generate
notifications when the bay lever is ejected or inserted.
If you are not sure, say Y here.
diff -ru a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
--- a/drivers/mtd/maps/Kconfig 2007-05-11 20:32:59.000000000 -0400
+++ b/drivers/mtd/maps/Kconfig 2007-05-11 21:32:22.000000000 -0400
@@ -54,7 +54,7 @@
help
This is the total width of the data bus of the flash devices
in octets. For example, if you have a data bus width of 32
- bits, you would set the bus width octect value to 4. This is
+ bits, you would set the bus width octet value to 4. This is
used internally by the CFI drivers.
Ignore this option if you use run-time physmap configuration
(i.e., run-time calling physmap_configure()).
@@ -73,12 +73,12 @@
depends on PMC_MSP && MTD_CFI
select MTD_PARTITIONS
help
- This provides a 'mapping' driver which support the way
+ This provides a 'mapping' driver which supports the way
in which user-programmable flash chips are connected on the
- PMC-Sierra MSP eval/demo boards
+ PMC-Sierra MSP eval/demo boards.
choice
- prompt "Maximum mappable memory avialable for flash IO"
+ prompt "Maximum mappable memory available for flash IO"
depends on MTD_PMC_MSP_EVM
default MSP_FLASH_MAP_LIMIT_32M
diff -ru a/drivers/video/Kconfig b/drivers/video/Kconfig
--- a/drivers/video/Kconfig 2007-05-11 20:33:11.000000000 -0400
+++ b/drivers/video/Kconfig 2007-05-11 21:18:17.000000000 -0400
@@ -618,7 +618,7 @@
help
This enables support for the Hecuba board. This driver was tested
with an E-Ink 800x600 display and x86 SBCs through a 16 bit GPIO
- interface (8 bit data, 4 bit control). If you anticpate using
+ interface (8 bit data, 4 bit control). If you anticipate using
this driver, say Y or M; otherwise say N. You must specify the
GPIO IO address to be used for setting control and data.
@@ -1542,7 +1542,7 @@
help
This is the framebuffer device for the Sun XVR-500 and similar
graphics cards based upon the 3DLABS Wildcat chipset. The driver
- only works on sparc64 systems where the system firwmare has
+ only works on sparc64 systems where the system firmware has
mostly initialized the card already. It is treated as a
completely dumb framebuffer device.
@@ -1555,7 +1555,7 @@
help
This is the framebuffer device for the Sun XVR-2500 and similar
graphics cards based upon the 3DLABS Wildcat chipset. The driver
- only works on sparc64 systems where the system firwmare has
+ only works on sparc64 systems where the system firmware has
mostly initialized the card already. It is treated as a
completely dumb framebuffer device.
diff -ru a/net/ipv4/Kconfig b/net/ipv4/Kconfig
--- a/net/ipv4/Kconfig 2007-05-11 20:33:58.000000000 -0400
+++ b/net/ipv4/Kconfig 2007-05-11 21:10:15.000000000 -0400
@@ -593,7 +593,7 @@
depends on EXPERIMENTAL
default n
---help---
- TCP-Illinois is a sender-side modificatio of TCP Reno for
+ TCP-Illinois is a sender-side modification of TCP Reno for
high speed long delay links. It uses round-trip-time to
adjust the alpha and beta parameters to achieve a higher average
throughput and maintain fairness.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists