| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Pine.LNX.4.64.0705301029500.13945@p34.internal.lan> Date: Wed, 30 May 2007 10:33:54 -0400 (EDT) From: Justin Piszcz <jpiszcz@...idpixels.com> To: Robert Hancock <hancockr@...w.ca> cc: linux-kernel@...r.kernel.org, crmotherboard@...lbox.intel.com Subject: Case: 7454422: Re: Kernel 2.6.21.3 does not work with 8GB of RAM on Intel 965WH motherboards. (FULL DMESG) Yes, you are correct, the netconsole output from another machine is shown below. If we can access the memory directly, why is it so slow? :( Am I the first person to try using 8 gigabytes of RAM on the 965 chipset? On Wed, 30 May 2007, Robert Hancock wrote: > Justin Piszcz wrote: >> Kernel dmesg attached from 8GB bootup. > > It looks like part of the start of the output was truncated.. > >> Robert, how come the option is not applicable in 64-bit mode? If I want to >> use all 8GB of memory I need to run a 32-bit kernel? >> >> Justin. >> > > Highmem and PAE (which are essentially what the 4GB/64GB memory options > control) are not needed in 64-bit mode, since we can access the entire 64-bit > address space directly. > > -- > Robert Hancock Saskatoon, SK, Canada > To email, remove "nospam" from hancockr@...pamshaw.ca > Home Page: http://www.roberthancock.com/ > Here is the _FULL_ dmesg! Thanks netconsole! May 29 17:39:11 p34 [ 0.000000] Linux version 2.6.21.3 (root@....internal.lan) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #4 SMP Sun May 27 06:28:33 EDT 2007 May 29 17:39:11 p34 [ 0.000000] Command line: auto BOOT_IMAGE=2.6.21.3-4 ro root=902 netconsole=4444@....168.168.253/eth0,514@....168.168.254/00:50:8D:ED:3C:E7 nmi_watchdog=1 May 29 17:39:11 p34 [ 0.000000] BIOS-provided physical RAM map: May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable) May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved) May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf58f000 (usable) May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 00000000cf58f000 - 00000000cf59c000 (reserved) May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 00000000cf59c000 - 00000000cf653000 (usable) May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 00000000cf653000 - 00000000cf6a5000 (ACPI NVS) May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 00000000cf6a5000 - 00000000cf6a8000 (ACPI data) May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 00000000cf6a8000 - 00000000cf6ef000 (ACPI NVS) May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 00000000cf6ef000 - 00000000cf6f1000 (ACPI data) May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 00000000cf6f1000 - 00000000cf6f2000 (usable) May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 00000000cf6f2000 - 00000000cf6ff000 (ACPI data) May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 00000000cf6ff000 - 00000000cf700000 (usable) May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 00000000cf700000 - 00000000d0000000 (reserved) May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 0000000100000000 - 000000022c000000 (usable) May 29 17:39:11 p34 [ 0.000000] end_pfn_map = 2277376 May 29 17:39:11 p34 [ 0.000000] DMI 2.4 present. May 29 17:39:11 p34 [ 0.000000] ACPI: RSDP 000FE020, 0014 (r0 INTEL ) May 29 17:39:11 p34 [ 0.000000] ACPI: RSDT CF6FD038, 0050 (r1 INTEL DG965WH 64C 1000013) May 29 17:39:11 p34 [ 0.000000] ACPI: FACP CF6FC000, 0074 (r1 INTEL DG965WH 64C MSFT 1000013) May 29 17:39:11 p34 [ 0.000000] ACPI: DSDT CF6F7000, 40E9 (r1 INTEL DG965WH 64C MSFT 1000013) May 29 17:39:11 p34 [ 0.000000] ACPI: FACS CF6A8000, 0040 May 29 17:39:11 p34 [ 0.000000] ACPI: APIC CF6F6000, 0078 (r1 INTEL DG965WH 64C MSFT 1000013) May 29 17:39:11 p34 [ 0.000000] ACPI: WDDT CF6F5000, 0040 (r1 INTEL DG965WH 64C MSFT 1000013) May 29 17:39:11 p34 [ 0.000000] ACPI: MCFG CF6F4000, 003C (r1 INTEL DG965WH 64C MSFT 1000013) May 29 17:39:11 p34 [ 0.000000] ACPI: ASF! CF6F3000, 00A6 (r32 INTEL DG965WH 64C MSFT 1000013) May 29 17:39:11 p34 [ 0.000000] ACPI: HPET CF6F2000, 0038 (r1 INTEL DG965WH 64C MSFT 1000013) May 29 17:39:11 p34 [ 0.000000] ACPI: SSDT CF6F0000, 01BC (r1 INTEL CpuPm 64C MSFT 1000013) May 29 17:39:11 p34 [ 0.000000] ACPI: SSDT CF6EF000, 0175 (r1 INTEL Cpu0Ist 64C MSFT 1000013) May 29 17:39:11 p34 [ 0.000000] ACPI: SSDT CF6A7000, 0175 (r1 INTEL Cpu1Ist 64C MSFT 1000013) May 29 17:39:11 p34 [ 0.000000] ACPI: SSDT CF6A6000, 0175 (r1 INTEL Cpu2Ist 64C MSFT 1000013) May 29 17:39:11 p34 [ 0.000000] ACPI: SSDT CF6A5000, 0175 (r1 INTEL Cpu3Ist 64C MSFT 1000013) May 29 17:39:11 p34 [ 0.000000] Zone PFN ranges: May 29 17:39:11 p34 [ 0.000000] DMA 0 -> 4096 May 29 17:39:11 p34 [ 0.000000] DMA32 4096 -> 1048576 May 29 17:39:11 p34 [ 0.000000] Normal 1048576 -> 2277376 May 29 17:39:11 p34 [ 0.000000] early_node_map[6] active PFN ranges May 29 17:39:11 p34 [ 0.000000] 0: 0 -> 143 May 29 17:39:11 p34 [ 0.000000] 0: 256 -> 849295 May 29 17:39:11 p34 [ 0.000000] 0: 849308 -> 849491 May 29 17:39:11 p34 [ 0.000000] 0: 849649 -> 849650 May 29 17:39:11 p34 [ 0.000000] 0: 849663 -> 849664 May 29 17:39:11 p34 [ 0.000000] 0: 1048576 -> 2277376 May 29 17:39:11 p34 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 May 29 17:39:11 p34 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) May 29 17:39:11 p34 [ 0.000000] Processor #0 (Bootup-CPU) May 29 17:39:11 p34 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) May 29 17:39:11 p34 [ 0.000000] Processor #2 May 29 17:39:11 p34 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) May 29 17:39:11 p34 [ 0.000000] Processor #1 May 29 17:39:11 p34 [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) May 29 17:39:11 p34 [ 0.000000] Processor #3 May 29 17:39:11 p34 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) May 29 17:39:11 p34 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) May 29 17:39:11 p34 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) May 29 17:39:11 p34 [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 May 29 17:39:11 p34 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) May 29 17:39:11 p34 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) May 29 17:39:11 p34 [ 0.000000] Setting APIC routing to flat May 29 17:39:11 p34 [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 May 29 17:39:11 p34 [ 0.000000] Using ACPI (MADT) for SMP configuration information May 29 17:39:11 p34 [ 0.000000] Nosave address range: 000000000008f000 - 00000000000a0000 May 29 17:39:11 p34 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e0000 May 29 17:39:11 p34 [ 0.000000] Nosave address range: 00000000000e0000 - 0000000000100000 May 29 17:39:11 p34 [ 0.000000] Nosave address range: 00000000cf58f000 - 00000000cf59c000 May 29 17:39:11 p34 [ 0.000000] Nosave address range: 00000000cf653000 - 00000000cf6a5000 May 29 17:39:11 p34 [ 0.000000] Nosave address range: 00000000cf6a5000 - 00000000cf6a8000 May 29 17:39:11 p34 [ 0.000000] Nosave address range: 00000000cf6a8000 - 00000000cf6ef000 May 29 17:39:11 p34 [ 0.000000] Nosave address range: 00000000cf6ef000 - 00000000cf6f1000 May 29 17:39:11 p34 [ 0.000000] Nosave address range: 00000000cf6f2000 - 00000000cf6ff000 May 29 17:39:11 p34 [ 0.000000] Nosave address range: 00000000cf700000 - 00000000d0000000 May 29 17:39:11 p34 [ 0.000000] Nosave address range: 00000000d0000000 - 00000000fff00000 May 29 17:39:11 p34 [ 0.000000] Nosave address range: 00000000fff00000 - 0000000100000000 May 29 17:39:11 p34 [ 0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ff00000) May 29 17:39:11 p34 [ 0.000000] PERCPU: Allocating 24512 bytes of per cpu data May 29 17:39:11 p34 [ 0.000000] Built 1 zonelists. Total pages: 2045692 May 29 17:39:11 p34 [ 0.000000] Kernel command line: auto BOOT_IMAGE=2.6.21.3-4 ro root=902 netconsole=4444@....168.168.253/eth0,514@....168.168.254/00:50:8D:ED:3C:E7 nmi_watchdog=1 May 29 17:39:11 p34 [ 0.000000] netconsole: local port 4444 May 29 17:39:11 p34 [ 0.000000] netconsole: local IP 192.168.168.253 May 29 17:39:11 p34 [ 0.000000] netconsole: interface eth0 May 29 17:39:11 p34 [ 0.000000] netconsole: remote port 514 May 29 17:39:11 p34 [ 0.000000] netconsole: remote IP 192.168.168.254 May 29 17:39:11 p34 [ 0.000000] netconsole: remote ethernet address 00:50:8d:ed:3c:e7 May 29 17:39:11 p34 [ 0.000000] Initializing CPU#0 May 29 17:39:11 p34 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) May 29 17:39:11 p34 [ 48.249507] time.c: Detected 2397.605 MHz processor. May 29 17:39:11 p34 [ 48.250572] Console: colour VGA+ 80x25 May 29 17:39:11 p34 [ 48.258651] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) May 29 17:39:11 p34 [ 48.264855] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) May 29 17:39:11 p34 [ 48.265963] Checking aperture... May 29 17:39:11 p34 [ 48.266011] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) May 29 17:39:11 p34 [ 48.302233] Placing software IO TLB between 0x95f6000 - 0xd5f6000 May 29 17:39:11 p34 [ 48.374061] Memory: 8103748k/9109504k available (3428k kernel code, 208464k reserved, 1270k data, 220k init) May 29 17:39:11 p34 [ 48.434756] Calibrating delay using timer specific routine.. 4797.72 BogoMIPS (lpj=2398863) May 29 17:39:11 p34 [ 48.435408] Mount-cache hash table entries: 256 May 29 17:39:11 p34 [ 48.436246] CPU: L1 I cache: 32K, L1 D cache: 32K May 29 17:39:11 p34 [ 48.436307] CPU: L2 cache: 4096K May 29 17:39:11 p34 [ 48.436347] using mwait in idle threads. May 29 17:39:11 p34 [ 48.436389] CPU: Physical Processor ID: 0 May 29 17:39:11 p34 [ 48.436430] CPU: Processor Core ID: 0 May 29 17:39:11 p34 [ 48.436474] CPU0: Thermal monitoring enabled (TM2) May 29 17:39:11 p34 [ 48.436526] Freeing SMP alternatives: 36k freed May 29 17:39:11 p34 [ 48.436584] ACPI: Core revision 20070126 May 29 17:39:11 p34 [ 48.485666] activating NMI Watchdog ... done. May 29 17:39:11 p34 [ 48.485786] Using local APIC timer interrupts. May 29 17:39:11 p34 [ 48.527564] result 16650037 May 29 17:39:11 p34 [ 48.527642] Detected 16.650 MHz APIC timer. May 29 17:39:11 p34 [ 48.529312] Booting processor 1/4 APIC 0x2 May 29 17:39:11 p34 [ 48.539943] Initializing CPU#1 May 29 17:39:11 p34 [ 48.600727] Calibrating delay using timer specific routine.. 4795.07 BogoMIPS (lpj=2397539) May 29 17:39:11 p34 [ 48.600785] CPU: L1 I cache: 32K, L1 D cache: 32K May 29 17:39:11 p34 [ 48.600822] CPU: L2 cache: 4096K May 29 17:39:11 p34 [ 48.600852] CPU: Physical Processor ID: 0 May 29 17:39:11 p34 [ 48.600879] CPU: Processor Core ID: 2 May 29 17:39:11 p34 [ 48.600914] CPU1: Thermal monitoring enabled (TM2) May 29 17:39:11 p34 [ 48.601348] Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07 May 29 17:39:11 p34 [ 48.601451] checking TSC synchronization [CPU#0 -> CPU#1]: passed. May 29 17:39:11 p34 [ 48.623998] Booting processor 2/4 APIC 0x1 May 29 17:39:11 p34 [ 48.635015] Initializing CPU#2 May 29 17:39:11 p34 [ 48.694729] Calibrating delay using timer specific routine.. 4796.63 BogoMIPS (lpj=2398315) May 29 17:39:11 p34 [ 48.694791] CPU: L1 I cache: 32K, L1 D cache: 32K May 29 17:39:11 p34 [ 48.694829] CPU: L2 cache: 4096K May 29 17:39:11 p34 [ 48.694861] CPU: Physical Processor ID: 0 May 29 17:39:11 p34 [ 48.694891] CPU: Processor Core ID: 1 May 29 17:39:11 p34 [ 48.694928] CPU2: Thermal monitoring enabled (TM2) May 29 17:39:11 p34 [ 48.695368] Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07 May 29 17:39:11 p34 [ 48.695508] checking TSC synchronization [CPU#0 -> CPU#2]: passed. May 29 17:39:11 p34 [ 48.717915] Booting processor 3/4 APIC 0x3 May 29 17:39:11 p34 [ 48.728547] Initializing CPU#3 May 29 17:39:11 p34 [ 48.788686] Calibrating delay using timer specific routine.. 4795.46 BogoMIPS (lpj=2397730) May 29 17:39:11 p34 [ 48.788750] CPU: L1 I cache: 32K, L1 D cache: 32K May 29 17:39:11 p34 [ 48.788787] CPU: L2 cache: 4096K May 29 17:39:11 p34 [ 48.788817] CPU: Physical Processor ID: 0 May 29 17:39:11 p34 [ 48.788846] CPU: Processor Core ID: 3 May 29 17:39:11 p34 [ 48.788882] CPU3: Thermal monitoring enabled (TM2) May 29 17:39:11 p34 [ 48.789318] Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07 May 29 17:39:11 p34 [ 48.789446] checking TSC synchronization [CPU#0 -> CPU#3]: passed. May 29 17:39:11 p34 [ 48.810753] Brought up 4 CPUs May 29 17:39:11 p34 [ 48.810941] testing NMI watchdog ... OK. May 29 17:39:11 p34 [ 49.178287] migration_cost=156,193 May 29 17:39:11 p34 [ 49.182074] NET: Registered protocol family 16 May 29 17:39:11 p34 [ 49.183506] ACPI: bus type pci registered May 29 17:39:11 p34 [ 49.183670] PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved May 29 17:39:11 p34 [ 49.183764] PCI: Not using MMCONFIG. May 29 17:39:11 p34 [ 49.183847] PCI: Using configuration type 1 May 29 17:39:11 p34 [ 49.324928] ACPI: Interpreter enabled May 29 17:39:11 p34 [ 49.325010] ACPI: Using IOAPIC for interrupt routing May 29 17:39:11 p34 [ 49.518427] ACPI: PCI Root Bridge [PCI0] (0000:00) May 29 17:39:11 p34 [ 49.523873] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO May 29 17:39:11 p34 [ 49.523974] PCI quirk: region 0500-053f claimed by ICH6 GPIO May 29 17:39:11 p34 [ 49.534492] PCI: Transparent bridge - 0000:00:1e.0 May 29 17:39:11 p34 [ 49.792346] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) May 29 17:39:11 p34 [ 49.796475] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) May 29 17:39:11 p34 [ 49.800543] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) May 29 17:39:11 p34 [ 49.804653] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) May 29 17:39:11 p34 [ 49.808781] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12) May 29 17:39:11 p34 [ 49.812812] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12) May 29 17:39:11 p34 [ 49.816864] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12) May 29 17:39:11 p34 [ 49.820999] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) May 29 17:39:11 p34 [ 49.824280] Linux Plug and Play Support v0.97 (c) Adam Belay May 29 17:39:11 p34 [ 49.824569] pnp: PnP ACPI init May 29 17:39:11 p34 [ 49.923406] pnp: PnP ACPI: found 12 devices May 29 17:39:11 p34 [ 49.927655] SCSI subsystem initialized May 29 17:39:11 p34 [ 49.935480] usbcore: registered new interface driver usbfs May 29 17:39:11 p34 [ 49.936497] usbcore: registered new interface driver hub May 29 17:39:11 p34 [ 49.939469] usbcore: registered new device driver usb May 29 17:39:11 p34 [ 49.942750] PCI: Using ACPI for IRQ routing May 29 17:39:11 p34 [ 49.942851] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report May 29 17:39:11 p34 [ 49.944223] PCI-GART: No AMD northbridge found. May 29 17:39:11 p34 [ 49.944929] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 May 29 17:39:11 p34 [ 49.945145] hpet0: 3 64-bit timers, 14318180 Hz May 29 17:39:11 p34 [ 49.946417] Time: tsc clocksource has been installed. May 29 17:39:11 p34 [ 49.947517] pnp: 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved May 29 17:39:11 p34 [ 49.947640] pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved May 29 17:39:11 p34 [ 49.947785] pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved May 29 17:39:11 p34 [ 49.947943] pnp: 00:01: iomem range 0xfed18000-0xfed18fff has been reserved May 29 17:39:11 p34 [ 49.948125] pnp: 00:06: ioport range 0x500-0x53f has been reserved May 29 17:39:11 p34 [ 49.948231] pnp: 00:06: ioport range 0x400-0x47f has been reserved May 29 17:39:11 p34 [ 49.948433] pnp: 00:06: ioport range 0x680-0x6ff has been reserved May 29 17:39:11 p34 [ 49.961379] ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 19 (level, low) -> IRQ 19 May 29 17:39:11 p34 [ 50.015143] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[e0084000-e00847ff] Max Packet=[2048] IR/IT contexts=[4/8] May 29 17:39:11 p34 [ 50.016694] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 May 29 17:39:11 p34 [ 50.017108] PCI: Bridge: 0000:00:1c.0 May 29 17:39:11 p34 [ 50.017203] IO window: disabled. May 29 17:39:11 p34 [ 50.017295] MEM window: e0700000-e07fffff May 29 17:39:11 p34 [ 50.017381] PREFETCH window: disabled. May 29 17:39:11 p34 [ 50.017507] PCI: Bridge: 0000:00:1c.1 May 29 17:39:11 p34 [ 50.017598] IO window: 5000-5fff May 29 17:39:11 p34 [ 50.017689] MEM window: e0400000-e04fffff May 29 17:39:11 p34 [ 50.017776] PREFETCH window: disabled. May 29 17:39:11 p34 [ 50.017882] PCI: Bridge: 0000:00:1c.2 May 29 17:39:11 p34 [ 50.017966] IO window: 4000-4fff May 29 17:39:11 p34 [ 50.018071] MEM window: e0300000-e03fffff May 29 17:39:11 p34 [ 50.018189] PREFETCH window: e0800000-e08fffff May 29 17:39:11 p34 [ 50.018297] PCI: Bridge: 0000:00:1c.3 May 29 17:39:11 p34 [ 50.018382] IO window: 3000-3fff May 29 17:39:11 p34 [ 50.018504] MEM window: e0200000-e02fffff May 29 17:39:11 p34 [ 50.018598] PREFETCH window: e0900000-e09fffff May 29 17:39:11 p34 [ 50.018707] PCI: Bridge: 0000:00:1c.4 May 29 17:39:11 p34 [ 50.018792] IO window: 2000-2fff May 29 17:39:11 p34 [ 50.018885] MEM window: e0100000-e01fffff May 29 17:39:11 p34 [ 50.018976] PREFETCH window: e0a00000-e0afffff May 29 17:39:11 p34 [ 50.019121] PCI: Bridge: 0000:00:1e.0 May 29 17:39:11 p34 [ 50.019234] IO window: 1000-1fff May 29 17:39:11 p34 [ 50.019325] MEM window: e0000000-e00fffff May 29 17:39:11 p34 [ 50.019436] PREFETCH window: e0b00000-e0bfffff May 29 17:39:11 p34 [ 50.019625] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 May 29 17:39:11 p34 [ 50.019912] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 May 29 17:39:11 p34 [ 50.020251] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 May 29 17:39:11 p34 [ 50.020556] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 May 29 17:39:11 p34 [ 50.020829] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17 May 29 17:39:11 p34 [ 50.022111] NET: Registered protocol family 2 May 29 17:39:11 p34 [ 50.032134] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) May 29 17:39:11 p34 [ 50.041151] TCP established hash table entries: 131072 (order: 9, 3145728 bytes) May 29 17:39:11 p34 [ 50.053741] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) May 29 17:39:11 p34 [ 50.057942] TCP: Hash tables configured (established 131072 bind 65536) May 29 17:39:11 p34 [ 50.058031] TCP reno registered May 29 17:39:11 p34 [ 50.104079] Installing knfsd (copyright (C) 1996 okir@...ad.swb.de). May 29 17:39:11 p34 [ 50.108290] SGI XFS with large block/inode numbers, no debug enabled May 29 17:39:11 p34 [ 50.124796] io scheduler noop registered May 29 17:39:11 p34 [ 50.124877] io scheduler anticipatory registered (default) May 29 17:39:11 p34 [ 50.130760] assign_interrupt_mode Found MSI capability May 29 17:39:11 p34 [ 50.133909] assign_interrupt_mode Found MSI capability May 29 17:39:11 p34 [ 50.136992] assign_interrupt_mode Found MSI capability May 29 17:39:11 p34 [ 50.139916] assign_interrupt_mode Found MSI capability May 29 17:39:11 p34 [ 50.142907] assign_interrupt_mode Found MSI capability May 29 17:39:11 p34 [ 50.217615] lp: driver loaded but no devices found May 29 17:39:11 p34 [ 50.219124] Real Time Clock Driver v1.12ac May 29 17:39:11 p34 [ 50.221782] Linux agpgart interface v0.102 (c) Dave Jones May 29 17:39:11 p34 [ 50.223328] agpgart: Detected an Intel 965G Chipset. May 29 17:39:11 p34 [ 50.224565] agpgart: Detected 7676K stolen memory. May 29 17:39:11 p34 [ 50.243289] agpgart: AGP aperture is 256M @ 0xd0000000 May 29 17:39:11 p34 [ 50.243856] [drm] Initialized drm 1.1.0 20060810 May 29 17:39:11 p34 [ 50.244141] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 May 29 17:39:11 p34 [ 50.246322] [drm] Initialized i915 1.6.0 20060119 on minor 0 May 29 17:39:11 p34 [ 50.247415] parport: PnPBIOS parport detected. May 29 17:39:11 p34 [ 50.247654] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] May 29 17:39:11 p34 [ 50.331362] lp0: using parport0 (interrupt-driven). May 29 17:39:11 p34 [ 50.341355] loop: loaded (max 8 devices) May 29 17:39:11 p34 [ 50.341437] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI May 29 17:39:11 p34 [ 50.341528] Copyright (c) 1999-2006 Intel Corporation. May 29 17:39:11 p34 [ 50.342520] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 May 29 17:39:11 p34 [ 50.360685] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:19:d1:6e:9d:43 May 29 17:39:11 p34 [ 50.439132] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection May 29 17:39:11 p34 [ 50.439655] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 21 (level, low) -> IRQ 21 May 29 17:39:11 p34 [ 50.705534] e1000: 0000:06:00.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:00:cd:b1 May 29 17:39:11 p34 [ 50.857482] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection May 29 17:39:11 p34 [ 50.857724] ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 22 (level, low) -> IRQ 22 May 29 17:39:11 p34 [ 51.107171] e1000: 0000:06:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:07:e9:29:37:db May 29 17:39:11 p34 [ 51.136221] e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection May 29 17:39:11 p34 [ 51.138251] netconsole: device eth0 not up yet, forcing it May 29 17:39:11 p34 [ 53.180364] e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX May 29 17:39:11 p34 [ 53.683096] netconsole: network logging started May 29 17:39:11 p34 [ 53.686923] ACPI: PCI Interrupt 0000:00:1f.2[A] -> May 29 17:39:11 p34 GSI 19 (level, low) -> IRQ 19 May 29 17:39:12 p34 [ 54.687783] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode May 29 17:39:12 p34 [ 54.687956] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part May 29 17:39:12 p34 [ 54.690522] ata1: SATA max UDMA/133 cmd 0xffffc20000078100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377 May 29 17:39:12 p34 [ 54.692552] ata2: SATA max UDMA/133 cmd 0xffffc20000078180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377 May 29 17:39:12 p34 [ 54.694637] ata3: SATA max UDMA/133 cmd 0xffffc20000078200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377 May 29 17:39:12 p34 [ 54.696669] ata4: SATA max UDMA/133 cmd 0xffffc20000078280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377 May 29 17:39:12 p34 [ 54.698687] ata5: SATA max UDMA/133 cmd 0xffffc20000078300 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377 May 29 17:39:12 p34 [ 54.700726] ata6: SATA max UDMA/133 cmd 0xffffc20000078380 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377 May 29 17:39:12 p34 [ 54.701011] scsi0 : ahci May 29 17:39:13 p34 [ 55.162816] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) May 29 17:39:13 p34 [ 55.165434] ata1.00: ATA-6: WDC WD740GD-00FLC0, 33.08F33, max UDMA/133 May 29 17:39:13 p34 [ 55.165604] ata1.00: 145226112 sectors, multi 0: LBA48 May 29 17:39:13 p34 [ 55.169510] ata1.00: configured for UDMA/133 May 29 17:39:13 p34 [ 55.170050] scsi1 : ahci May 29 17:39:13 p34 [ 55.632888] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) May 29 17:39:13 p34 [ 55.635466] ata2.00: ATA-6: WDC WD740GD-00FLC0, 33.08F33, max UDMA/133 May 29 17:39:13 p34 [ 55.635625] ata2.00: 145226112 sectors, multi 0: LBA48 May 29 17:39:13 p34 [ 55.639563] ata2.00: configured for UDMA/133 May 29 17:39:13 p34 [ 55.639885] scsi2 : ahci May 29 17:39:14 p34 [ 56.100111] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) May 29 17:39:14 p34 [ 56.101908] ata3.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 May 29 17:39:14 p34 [ 56.102086] ata3.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32) May 29 17:39:14 p34 [ 56.104825] ata3.00: configured for UDMA/133 May 29 17:39:14 p34 [ 56.105036] scsi3 : ahci May 29 17:39:14 p34 [ 56.567476] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) May 29 17:39:14 p34 [ 56.569281] ata4.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 May 29 17:39:14 p34 [ 56.569423] ata4.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32) May 29 17:39:14 p34 [ 56.572150] ata4.00: configured for UDMA/133 May 29 17:39:14 p34 [ 56.572391] scsi4 : ahci May 29 17:39:15 p34 [ 57.032365] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) May 29 17:39:15 p34 [ 57.034115] ata5.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 May 29 17:39:15 p34 [ 57.034245] ata5.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32) May 29 17:39:15 p34 [ 57.036865] ata5.00: configured for UDMA/133 May 29 17:39:15 p34 [ 57.037078] scsi5 : ahci May 29 17:39:15 p34 [ 57.496550] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) May 29 17:39:15 p34 [ 57.498270] ata6.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 May 29 17:39:15 p34 [ 57.498438] ata6.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32) May 29 17:39:15 p34 [ 57.501093] ata6.00: configured for UDMA/133 May 29 17:39:15 p34 [ 57.502916] scsi 0:0:0:0: Direct-Access ATA WDC WD740GD-00FL 33.0 PQ: 0 ANSI: 5 May 29 17:39:15 p34 [ 57.505120] SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB) May 29 17:39:15 p34 [ 57.505456] sda: Write Protect is off May 29 17:39:15 p34 [ 57.506051] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 29 17:39:15 p34 [ 57.507023] SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB) May 29 17:39:15 p34 [ 57.507356] sda: Write Protect is off May 29 17:39:15 p34 [ 57.507977] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 29 17:39:15 p34 [ 57.508155] sda: May 29 17:39:15 p34 sda1 May 29 17:39:15 p34 sda2 May 29 17:39:15 p34 sda3 May 29 17:39:15 p34 May 29 17:39:15 p34 [ 57.524234] sd 0:0:0:0: Attached scsi disk sda May 29 17:39:15 p34 [ 57.526473] scsi 1:0:0:0: Direct-Access ATA WDC WD740GD-00FL 33.0 PQ: 0 ANSI: 5 May 29 17:39:15 p34 [ 57.528478] SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB) May 29 17:39:15 p34 [ 57.528824] sdb: Write Protect is off May 29 17:39:15 p34 [ 57.529324] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 29 17:39:15 p34 [ 57.530179] SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB) May 29 17:39:15 p34 [ 57.530511] sdb: Write Protect is off May 29 17:39:15 p34 [ 57.531016] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 29 17:39:15 p34 [ 57.531162] sdb: May 29 17:39:15 p34 sdb1 May 29 17:39:15 p34 sdb2 May 29 17:39:15 p34 sdb3 May 29 17:39:15 p34 May 29 17:39:15 p34 [ 57.545063] sd 1:0:0:0: Attached scsi disk sdb May 29 17:39:15 p34 [ 57.547103] scsi 2:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 May 29 17:39:15 p34 [ 57.549007] SCSI device sdc: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:15 p34 [ 57.549322] sdc: Write Protect is off May 29 17:39:15 p34 [ 57.549869] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 29 17:39:15 p34 [ 57.550710] SCSI device sdc: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:15 p34 [ 57.551003] sdc: Write Protect is off May 29 17:39:15 p34 [ 57.551505] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 29 17:39:15 p34 [ 57.551726] sdc: May 29 17:39:15 p34 sdc1 May 29 17:39:15 p34 May 29 17:39:15 p34 [ 57.565362] sd 2:0:0:0: Attached scsi disk sdc May 29 17:39:15 p34 [ 57.567447] scsi 3:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 May 29 17:39:15 p34 [ 57.569384] SCSI device sdd: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:15 p34 [ 57.569725] sdd: Write Protect is off May 29 17:39:15 p34 [ 57.570218] SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 29 17:39:15 p34 [ 57.571193] SCSI device sdd: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:15 p34 [ 57.571500] sdd: Write Protect is off May 29 17:39:15 p34 [ 57.572003] SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 29 17:39:15 p34 [ 57.572162] sdd: May 29 17:39:15 p34 sdd1 May 29 17:39:15 p34 May 29 17:39:15 p34 [ 57.587442] sd 3:0:0:0: Attached scsi disk sdd May 29 17:39:15 p34 [ 57.589470] scsi 4:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 May 29 17:39:15 p34 [ 57.591359] SCSI device sde: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:15 p34 [ 57.591632] sde: Write Protect is off May 29 17:39:15 p34 [ 57.592147] SCSI device sde: write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 29 17:39:15 p34 [ 57.593038] SCSI device sde: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:15 p34 [ 57.593357] sde: Write Protect is off May 29 17:39:15 p34 [ 57.593826] SCSI device sde: write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 29 17:39:15 p34 [ 57.594001] sde: May 29 17:39:15 p34 sde1 May 29 17:39:15 p34 May 29 17:39:15 p34 [ 57.605438] sd 4:0:0:0: Attached scsi disk sde May 29 17:39:15 p34 [ 57.607617] scsi 5:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 May 29 17:39:15 p34 [ 57.609437] SCSI device sdf: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:15 p34 [ 57.609770] sdf: Write Protect is off May 29 17:39:15 p34 [ 57.610284] SCSI device sdf: write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 29 17:39:15 p34 [ 57.611221] SCSI device sdf: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:15 p34 [ 57.611518] sdf: Write Protect is off May 29 17:39:15 p34 [ 57.612049] SCSI device sdf: write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 29 17:39:15 p34 [ 57.612225] sdf: May 29 17:39:15 p34 sdf1 May 29 17:39:15 p34 May 29 17:39:15 p34 [ 57.623709] sd 5:0:0:0: Attached scsi disk sdf May 29 17:39:15 p34 [ 57.626592] ACPI: PCI Interrupt 0000:03:00.0[A] -> May 29 17:39:15 p34 GSI 18 (level, low) -> IRQ 18 May 29 17:39:15 p34 [ 57.628562] ata7: SATA max UDMA/100 cmd 0xffffc20000108000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 18 May 29 17:39:15 p34 [ 57.629915] ata8: SATA max UDMA/100 cmd 0xffffc2000010a000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 18 May 29 17:39:15 p34 [ 57.630185] scsi6 : sata_sil24 May 29 17:39:16 p34 [ 58.036965] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) May 29 17:39:16 p34 [ 58.039003] ata7.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 May 29 17:39:16 p34 [ 58.039153] ata7.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32) May 29 17:39:16 p34 [ 58.042162] ata7.00: configured for UDMA/100 May 29 17:39:16 p34 [ 58.042345] scsi7 : sata_sil24 May 29 17:39:16 p34 [ 58.448234] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) May 29 17:39:16 p34 [ 58.450325] ata8.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 May 29 17:39:16 p34 [ 58.450480] ata8.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32) May 29 17:39:16 p34 [ 58.453526] ata8.00: configured for UDMA/100 May 29 17:39:16 p34 [ 58.454693] scsi 6:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 May 29 17:39:16 p34 [ 58.456666] SCSI device sdg: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:16 p34 [ 58.456964] sdg: Write Protect is off May 29 17:39:16 p34 [ 58.458045] SCSI device sdg: write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 29 17:39:16 p34 [ 58.458913] SCSI device sdg: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:16 p34 [ 58.459203] sdg: Write Protect is off May 29 17:39:16 p34 [ 58.459754] SCSI device sdg: write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 29 17:39:16 p34 [ 58.459918] sdg: May 29 17:39:16 p34 sdg1 May 29 17:39:16 p34 May 29 17:39:16 p34 [ 58.474199] sd 6:0:0:0: Attached scsi disk sdg May 29 17:39:16 p34 [ 58.476416] scsi 7:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 May 29 17:39:16 p34 [ 58.478356] SCSI device sdh: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:16 p34 [ 58.478711] sdh: Write Protect is off May 29 17:39:16 p34 [ 58.479177] SCSI device sdh: write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 29 17:39:16 p34 [ 58.480075] SCSI device sdh: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:16 p34 [ 58.480402] sdh: Write Protect is off May 29 17:39:16 p34 [ 58.480928] SCSI device sdh: write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 29 17:39:16 p34 [ 58.481075] sdh: May 29 17:39:16 p34 sdh1 May 29 17:39:16 p34 May 29 17:39:16 p34 [ 58.495586] sd 7:0:0:0: Attached scsi disk sdh May 29 17:39:16 p34 [ 58.496786] ACPI: PCI Interrupt 0000:04:00.0[A] -> May 29 17:39:16 p34 GSI 19 (level, low) -> IRQ 19 May 29 17:39:16 p34 [ 58.498258] ata9: SATA max UDMA/100 cmd 0xffffc20000110000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19 May 29 17:39:16 p34 [ 58.499601] ata10: SATA max UDMA/100 cmd 0xffffc20000112000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19 May 29 17:39:16 p34 [ 58.499831] scsi8 : sata_sil24 May 29 17:39:16 p34 [ 58.906766] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) May 29 17:39:16 p34 [ 58.908540] ata9.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 May 29 17:39:16 p34 [ 58.908698] ata9.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32) May 29 17:39:16 p34 [ 58.911323] ata9.00: configured for UDMA/100 May 29 17:39:16 p34 [ 58.911545] scsi9 : sata_sil24 May 29 17:39:17 p34 [ 59.317958] ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 300) May 29 17:39:17 p34 [ 59.319759] ata10.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 May 29 17:39:17 p34 [ 59.319892] ata10.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32) May 29 17:39:17 p34 [ 59.322532] ata10.00: configured for UDMA/100 May 29 17:39:17 p34 [ 59.323739] scsi 8:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 May 29 17:39:17 p34 [ 59.325657] SCSI device sdi: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:17 p34 [ 59.325964] sdi: Write Protect is off May 29 17:39:17 p34 [ 59.326500] SCSI device sdi: write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 29 17:39:17 p34 [ 59.327388] SCSI device sdi: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:17 p34 [ 59.327707] sdi: Write Protect is off May 29 17:39:17 p34 [ 59.328203] SCSI device sdi: write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 29 17:39:17 p34 [ 59.328380] sdi: May 29 17:39:17 p34 sdi1 May 29 17:39:17 p34 May 29 17:39:17 p34 [ 59.340639] sd 8:0:0:0: Attached scsi disk sdi May 29 17:39:17 p34 [ 59.342775] scsi 9:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 May 29 17:39:17 p34 [ 59.344776] SCSI device sdj: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:17 p34 [ 59.345103] sdj: Write Protect is off May 29 17:39:17 p34 [ 59.345608] SCSI device sdj: write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 29 17:39:17 p34 [ 59.346489] SCSI device sdj: 293046768 5 May 29 17:39:17 p34 12-byte hdwr sectors (150040 MB) May 29 17:39:17 p34 [ 59.346850] sdj: Write Protect is off May 29 17:39:17 p34 [ 59.347393] SCSI device sdj: write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 29 17:39:17 p34 [ 59.347552] sdj: May 29 17:39:17 p34 sdj1 May 29 17:39:17 p34 May 29 17:39:17 p34 [ 59.362148] sd 9:0:0:0: Attached scsi disk sdj May 29 17:39:17 p34 [ 59.363387] ACPI: PCI Interrupt 0000:05:00.0[A] -> May 29 17:39:17 p34 GSI 16 (level, low) -> IRQ 16 May 29 17:39:17 p34 [ 59.365179] ata11: SATA max UDMA/100 cmd 0xffffc20000118000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 May 29 17:39:17 p34 [ 59.367143] ata12: SATA max UDMA/100 cmd 0xffffc2000011a000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 May 29 17:39:17 p34 [ 59.367432] scsi10 : sata_sil24 May 29 17:39:17 p34 [ 59.775363] ata11: SATA link up 1.5 Gbps (SStatus 113 SControl 300) May 29 17:39:17 p34 [ 59.777435] ata11.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 May 29 17:39:17 p34 [ 59.777565] ata11.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32) May 29 17:39:17 p34 [ 59.780599] ata11.00: configured for UDMA/100 May 29 17:39:17 p34 [ 59.780798] scsi11 : sata_sil24 May 29 17:39:18 p34 [ 60.187580] ata12: SATA link up 1.5 Gbps (SStatus 113 SControl 300) May 29 17:39:18 p34 [ 60.189625] ata12.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 May 29 17:39:18 p34 [ 60.189769] ata12.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32) May 29 17:39:18 p34 [ 60.192796] ata12.00: configured for UDMA/100 May 29 17:39:18 p34 [ 60.193974] scsi 10:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 May 29 17:39:18 p34 [ 60.195832] SCSI device sdk: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:18 p34 [ 60.196127] sdk: Write Protect is off May 29 17:39:18 p34 [ 60.196614] SCSI device sdk: write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 29 17:39:18 p34 [ 60.197514] SCSI device sdk: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:18 p34 [ 60.197845] sdk: Write Protect is off May 29 17:39:18 p34 [ 60.198333] SCSI device sdk: write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 29 17:39:18 p34 [ 60.198507] sdk: May 29 17:39:18 p34 sdk1 May 29 17:39:18 p34 May 29 17:39:18 p34 [ 60.212748] sd 10:0:0:0: Attached scsi disk sdk May 29 17:39:18 p34 [ 60.214934] scsi 11:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 May 29 17:39:18 p34 [ 60.216923] SCSI device sdl: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:18 p34 [ 60.217271] sdl: Write Protect is off May 29 17:39:18 p34 [ 60.217774] SCSI device sdl: write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 29 17:39:18 p34 [ 60.218665] SCSI device sdl: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:18 p34 [ 60.218974] sdl: Write Protect is off May 29 17:39:18 p34 [ 60.219497] SCSI device sdl: write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 29 17:39:18 p34 [ 60.219671] sdl: May 29 17:39:18 p34 sdl1 May 29 17:39:18 p34 May 29 17:39:18 p34 [ 60.234367] sd 11:0:0:0: Attached scsi disk sdl May 29 17:39:18 p34 [ 60.236317] ACPI: PCI Interrupt 0000:02:00.0[A] -> May 29 17:39:18 p34 GSI 17 (level, low) -> IRQ 17 May 29 17:39:18 p34 [ 60.237365] ata13: PATA max UDMA/100 cmd 0x0000000000015018 ctl 0x0000000000015026 bmdma 0x0000000000015000 irq 17 May 29 17:39:18 p34 [ 60.237631] scsi12 : pata_marvell May 29 17:39:18 p34 [ 60.239266] BAR5: May 29 17:39:18 p34 00:00 May 29 17:39:18 p34 01:7F May 29 17:39:18 p34 02:22 May 29 17:39:18 p34 03:CA May 29 17:39:18 p34 04:00 May 29 17:39:18 p34 05:00 May 29 17:39:18 p34 06:00 May 29 17:39:18 p34 07:00 May 29 17:39:18 p34 08:00 May 29 17:39:18 p34 09:00 May 29 17:39:18 p34 0A:00 May 29 17:39:18 p34 0B:00 May 29 17:39:18 p34 0C:01 May 29 17:39:18 p34 0D:00 May 29 17:39:18 p34 0E:00 May 29 17:39:18 p34 0F:00 May 29 17:39:18 p34 May 29 17:39:18 p34 [ 60.545828] ata13.00: ATAPI, max UDMA/33 May 29 17:39:18 p34 [ 60.701530] ata13.00: configured for UDMA/33 May 29 17:39:18 p34 [ 60.703942] scsi 12:0:0:0: CD-ROM _NEC DVD_RW ND-3520A 1.04 PQ: 0 ANSI: 5 May 29 17:39:18 p34 [ 60.711411] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray May 29 17:39:18 p34 [ 60.711545] Uniform CD-ROM driver Revision: 3.20 May 29 17:39:18 p34 [ 60.714694] ACPI: PCI Interrupt 0000:00:1a.7[C] -> May 29 17:39:18 p34 GSI 18 (level, low) -> IRQ 18 May 29 17:39:18 p34 [ 60.715083] ehci_hcd 0000:00:1a.7: EHCI Host Controller May 29 17:39:18 p34 [ 60.716069] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 May 29 17:39:18 p34 [ 60.716562] ehci_hcd 0000:00:1a.7: debug port 1 May 29 17:39:18 p34 [ 60.716810] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0625c00 May 29 17:39:18 p34 [ 60.720814] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 May 29 17:39:18 p34 [ 60.723647] usb usb1: configuration #1 chosen from 1 choice May 29 17:39:18 p34 [ 60.724706] hub 1-0:1.0: USB hub found May 29 17:39:18 p34 [ 60.724901] hub 1-0:1.0: 4 ports detected May 29 17:39:18 p34 [ 60.829165] ACPI: PCI Interrupt 0000:00:1d.7[A] -> May 29 17:39:18 p34 GSI 23 (level, low) -> IRQ 23 May 29 17:39:18 p34 [ 60.829583] ehci_hcd 0000:00:1d.7: EHCI Host Controller May 29 17:39:18 p34 [ 60.830451] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 May 29 17:39:18 p34 [ 60.830986] ehci_hcd 0000:00:1d.7: debug port 1 May 29 17:39:18 p34 [ 60.831229] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0625800 May 29 17:39:18 p34 [ 60.835261] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 May 29 17:39:18 p34 [ 60.837971] usb usb2: configuration #1 chosen from 1 choice May 29 17:39:18 p34 [ 60.839024] hub 2-0:1.0: USB hub found May 29 17:39:18 p34 [ 60.839241] hub 2-0:1.0: 6 ports detected May 29 17:39:19 p34 [ 60.942849] USB Universal Host Controller Interface driver v3.0 May 29 17:39:19 p34 [ 60.943912] ACPI: PCI Interrupt 0000:00:1a.0[A] -> May 29 17:39:19 p34 GSI 16 (level, low) -> IRQ 16 May 29 17:39:19 p34 [ 60.944250] uhci_hcd 0000:00:1a.0: UHCI Host Controller May 29 17:39:19 p34 [ 60.945081] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 May 29 17:39:19 p34 [ 60.945338] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000060c0 May 29 17:39:19 p34 [ 60.948562] usb usb3: configuration #1 chosen from 1 choice May 29 17:39:19 p34 [ 60.949639] hub 3-0:1.0: USB hub found May 29 17:39:19 p34 [ 60.949832] hub 3-0:1.0: 2 ports detected May 29 17:39:19 p34 [ 61.053768] ACPI: PCI Interrupt 0000:00:1a.1[B] -> May 29 17:39:19 p34 GSI 21 (level, low) -> IRQ 21 May 29 17:39:19 p34 [ 61.054098] uhci_hcd 0000:00:1a.1: UHCI Host Controller May 29 17:39:19 p34 [ 61.054937] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 May 29 17:39:19 p34 [ 61.055187] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000060a0 May 29 17:39:19 p34 [ 61.058179] usb usb4: configuration #1 chosen from 1 choice May 29 17:39:19 p34 [ 61.059320] hub 4-0:1.0: USB hub found May 29 17:39:19 p34 [ 61.059500] hub 4-0:1.0: 2 ports detected May 29 17:39:19 p34 [ 61.162594] ACPI: PCI Interrupt 0000:00:1d.0[A] -> May 29 17:39:19 p34 GSI 23 (level, low) -> IRQ 23 May 29 17:39:19 p34 [ 61.162944] uhci_hcd 0000:00:1d.0: UHCI Host Controller May 29 17:39:19 p34 [ 61.163751] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 May 29 17:39:19 p34 [ 61.164039] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00006080 May 29 17:39:19 p34 [ 61.166996] usb usb5: configuration #1 chosen from 1 choice May 29 17:39:19 p34 [ 61.168132] hub 5-0:1.0: USB hub found May 29 17:39:19 p34 [ 61.168320] hub 5-0:1.0: 2 ports detected May 29 17:39:19 p34 [ 61.271253] ACPI: PCI Interrupt 0000:00:1d.1[B] -> May 29 17:39:19 p34 GSI 19 (level, low) -> IRQ 19 May 29 17:39:19 p34 [ 61.271587] uhci_hcd 0000:00:1d.1: UHCI Host Controller May 29 17:39:19 p34 [ 61.272501] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 May 29 17:39:19 p34 [ 61.272757] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006060 May 29 17:39:19 p34 [ 61.275754] usb usb6: configuration #1 chosen from 1 choice May 29 17:39:19 p34 [ 61.276869] hub 6-0:1.0: USB hub found May 29 17:39:19 p34 [ 61.277042] hub 6-0:1.0: 2 ports detected May 29 17:39:19 p34 [ 61.379999] ACPI: PCI Interrupt 0000:00:1d.2[C] -> May 29 17:39:19 p34 GSI 18 (level, low) -> IRQ 18 May 29 17:39:19 p34 [ 61.380331] uhci_hcd 0000:00:1d.2: UHCI Host Controller May 29 17:39:19 p34 [ 61.381211] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 May 29 17:39:19 p34 [ 61.381464] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040 May 29 17:39:19 p34 [ 61.385027] usb usb7: configuration #1 chosen from 1 choice May 29 17:39:19 p34 [ 61.386139] hub 7-0:1.0: USB hub found May 29 17:39:19 p34 [ 61.386313] hub 7-0:1.0: 2 ports detected May 29 17:39:19 p34 [ 61.477697] usb 5-1: new low speed USB device using uhci_hcd and address 2 May 29 17:39:19 p34 [ 61.489915] Initializing USB Mass Storage driver... May 29 17:39:19 p34 [ 61.641966] usb 5-1: configuration #1 chosen from 1 choice May 29 17:39:19 p34 [ 61.647974] usbcore: registered new interface driver usb-storage May 29 17:39:19 p34 [ 61.648124] USB Mass Storage support registered. May 29 17:39:19 p34 [ 61.649681] usbcore: registered new interface driver hiddev May 29 17:39:20 p34 [ 62.146211] May 29 17:39:20 p34 hiddev96 May 29 17:39:20 p34 : USB HID v1.00 Device [ UPS] on usb-0000:00:1d.0-1 May 29 17:39:20 p34 [ 62.146611] usbcore: registered new interface driver usbhid May 29 17:39:20 p34 [ 62.146747] drivers/usb/input/hid-core.c: v2.6:USB HID core driver May 29 17:39:20 p34 [ 62.148329] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 May 29 17:39:20 p34 [ 62.152574] serio: i8042 KBD port at 0x60,0x64 irq 1 May 29 17:39:20 p34 [ 62.152739] serio: i8042 AUX port at 0x60,0x64 irq 12 May 29 17:39:20 p34 [ 62.153709] mice: PS/2 mouse device common for all mice May 29 17:39:20 p34 [ 62.157353] input: PC Speaker as /class/input/input0 May 29 17:39:20 p34 [ 62.157569] i2c /dev entries driver May 29 17:39:20 p34 [ 62.158424] md: raid1 personality registered for level 1 May 29 17:39:20 p34 [ 62.174745] raid6: int64x1 62 MB/s May 29 17:39:20 p34 [ 62.178692] input: AT Translated Set 2 keyboard as /class/input/input1 May 29 17:39:20 p34 [ 62.192019] raid6: int64x2 89 MB/s May 29 17:39:20 p34 [ 62.209023] raid6: int64x4 31 MB/s May 29 17:39:20 p34 [ 62.225777] raid6: int64x8 11 MB/s May 29 17:39:20 p34 [ 62.242854] raid6: sse2x1 148 MB/s May 29 17:39:20 p34 [ 62.259636] raid6: sse2x2 269 MB/s May 29 17:39:20 p34 [ 62.276650] raid6: sse2x4 460 MB/s May 29 17:39:20 p34 [ 62.276789] raid6: using algorithm sse2x4 (460 MB/s) May 29 17:39:20 p34 [ 62.276937] md: raid6 personality registered for level 6 May 29 17:39:20 p34 [ 62.277053] md: raid5 personality registered for level 5 May 29 17:39:20 p34 [ 62.277191] md: raid4 personality registered for level 4 May 29 17:39:20 p34 [ 62.277346] raid5: automatically using best checksumming function: generic_sse May 29 17:39:20 p34 [ 62.281657] generic_sse: 56.000 MB/sec May 29 17:39:20 p34 [ 62.281777] raid5: using function: generic_sse (56.000 MB/sec) May 29 17:39:20 p34 [ 62.282244] Advanced Linux Sound Architecture Driver Version 1.0.14rc3 (Wed Mar 14 07:25:50 2007 UTC). May 29 17:39:20 p34 [ 62.288220] ACPI: PCI Interrupt 0000:00:1b.0[A] -> May 29 17:39:20 p34 GSI 22 (level, low) -> IRQ 22 May 29 17:39:20 p34 [ 62.839554] input: ImPS/2 Generic Wheel Mouse as /class/input/input2 May 29 17:39:21 p34 [ 63.412487] hda_intel: azx_get_response timeout, switching to polling mode... May 29 17:39:21 p34 [ 63.435772] ALSA device list: May 29 17:39:21 p34 [ 63.435876] #0: HDA Intel at 0xe0620000 irq 22 May 29 17:39:21 p34 [ 63.436031] u32 classifier May 29 17:39:21 p34 [ 63.436148] Actions configured May 29 17:39:21 p34 [ 63.436279] nf_conntrack version 0.5.0 (8192 buckets, 65536 max) May 29 17:39:21 p34 [ 63.438882] ip_tables: (C) 2000-2006 Netfilter Core Team May 29 17:39:21 p34 [ 63.439995] TCP cubic registered May 29 17:39:21 p34 [ 63.440386] NET: Registered protocol family 1 May 29 17:39:21 p34 [ 63.440507] NET: Registered protocol family 17 May 29 17:39:21 p34 [ 63.445397] md: Autodetecting RAID arrays. May 29 17:39:21 p34 [ 63.572955] md: autorun ... May 29 17:39:21 p34 [ 63.573095] md: considering sdl1 ... May 29 17:39:21 p34 [ 63.573596] md: adding sdl1 ... May 29 17:39:21 p34 [ 63.573924] md: adding sdk1 ... May 29 17:39:21 p34 [ 63.574312] md: adding sdj1 ... May 29 17:39:21 p34 [ 63.574664] md: adding sdi1 ... May 29 17:39:21 p34 [ 63.575005] md: adding sdh1 ... May 29 17:39:21 p34 [ 63.575396] md: adding sdg1 ... May 29 17:39:21 p34 [ 63.575754] md: adding sdf1 ... May 29 17:39:21 p34 [ 63.576089] md: adding sde1 ... May 29 17:39:21 p34 [ 63.576472] md: adding sdd1 ... May 29 17:39:21 p34 [ 63.576824] md: adding sdc1 ... May 29 17:39:21 p34 [ 63.577015] md: sdb3 has different UUID to sdl1 May 29 17:39:21 p34 [ 63.577204] md: sdb2 has different UUID to sdl1 May 29 17:39:21 p34 [ 63.577446] md: sdb1 has different UUID to sdl1 May 29 17:39:21 p34 [ 63.577647] md: sda3 has different UUID to sdl1 May 29 17:39:21 p34 [ 63.577846] md: sda2 has different UUID to sdl1 May 29 17:39:21 p34 [ 63.578043] md: sda1 has different UUID to sdl1 May 29 17:39:21 p34 [ 63.579527] md: created md3 May 29 17:39:21 p34 [ 63.579639] md: bind<sdc1> May 29 17:39:21 p34 [ 63.579956] md: bind<sdd1> May 29 17:39:21 p34 [ 63.580329] md: bind<sde1> May 29 17:39:21 p34 [ 63.580627] md: bind<sdf1> May 29 17:39:21 p34 [ 63.580933] md: bind<sdg1> May 29 17:39:21 p34 [ 63.581229] md: bind<sdh1> May 29 17:39:21 p34 [ 63.581624] md: bind<sdi1> May 29 17:39:21 p34 [ 63.582103] md: bind<sdj1> May 29 17:39:21 p34 [ 63.582436] md: bind<sdk1> May 29 17:39:21 p34 [ 63.582776] md: bind<sdl1> May 29 17:39:21 p34 [ 63.583100] md: running: May 29 17:39:21 p34 May 29 17:39:21 p34 [ 63.586384] raid5: device sdl1 operational as raid disk 2 May 29 17:39:21 p34 [ 63.586509] raid5: device sdk1 operational as raid disk 3 May 29 17:39:21 p34 [ 63.586656] raid5: device sdj1 operational as raid disk 0 May 29 17:39:21 p34 [ 63.586829] raid5: device sdi1 operational as raid disk 1 May 29 17:39:21 p34 [ 63.586973] raid5: device sdh1 operational as raid disk 6 May 29 17:39:21 p34 [ 63.587122] raid5: device sdg1 operational as raid disk 5 May 29 17:39:21 p34 [ 63.587317] raid5: device sdf1 operational as raid disk 4 May 29 17:39:21 p34 [ 63.587459] raid5: device sde1 operational as raid disk 7 May 29 17:39:21 p34 [ 63.587603] raid5: device sdd1 operational as raid disk 8 May 29 17:39:21 p34 [ 63.587758] raid5: device sdc1 operational as raid disk 9 May 29 17:39:21 p34 [ 63.608186] raid5: allocated 10562kB for md3 May 29 17:39:21 p34 [ 63.608334] raid5: raid level 5 set md3 active with 10 out of 10 devices, algorithm 2 May 29 17:39:21 p34 [ 63.608519] RAID5 conf printout: May 29 17:39:21 p34 [ 63.608639] --- rd:10 wd:10 May 29 17:39:21 p34 [ 63.608767] disk 0, o:1, dev:sdj1 May 29 17:39:21 p34 [ 63.608897] disk 1, o:1, dev:sdi1 May 29 17:39:21 p34 [ 63.609073] disk 2, o:1, dev:sdl1 May 29 17:39:21 p34 [ 63.609184] disk 3, o:1, dev:sdk1 May 29 17:39:21 p34 [ 63.609346] disk 4, o:1, dev:sdf1 May 29 17:39:21 p34 [ 63.609507] disk 5, o:1, dev:sdg1 May 29 17:39:21 p34 [ 63.609640] disk 6, o:1, dev:sdh1 May 29 17:39:21 p34 [ 63.609771] disk 7, o:1, dev:sde1 May 29 17:39:21 p34 [ 63.609903] disk 8, o:1, dev:sdd1 May 29 17:39:21 p34 [ 63.610040] disk 9, o:1, dev:sdc1 May 29 17:39:21 p34 [ 63.612460] md: considering sdb3 ... May 29 17:39:21 p34 [ 63.612835] md: adding sdb3 ... May 29 17:39:21 p34 [ 63.613027] md: sdb2 has different UUID to sdb3 May 29 17:39:21 p34 [ 63.613220] md: sdb1 has different UUID to sdb3 May 29 17:39:21 p34 [ 63.613589] md: adding sda3 ... May 29 17:39:21 p34 [ 63.613801] md: sda2 has different UUID to sdb3 May 29 17:39:21 p34 [ 63.613997] md: sda1 has different UUID to sdb3 May 29 17:39:21 p34 [ 63.615606] md: created md2 May 29 17:39:21 p34 [ 63.615720] md: bind<sda3> May 29 17:39:21 p34 [ 63.616094] md: bind<sdb3> May 29 17:39:21 p34 [ 63.616575] md: running: May 29 17:39:21 p34 May 29 17:39:21 p34 [ 63.619316] raid1: raid set md2 active with 2 out of 2 mirrors May 29 17:39:21 p34 [ 63.620513] md: considering sdb2 ... May 29 17:39:21 p34 [ 63.620870] md: adding sdb2 ... May 29 17:39:21 p34 [ 63.621082] md: sdb1 has different UUID to sdb2 May 29 17:39:21 p34 [ 63.621465] md: adding sda2 ... May 29 17:39:21 p34 [ 63.621646] md: sda1 has different UUID to sdb2 May 29 17:39:21 p34 [ 63.623619] md: created md1 May 29 17:39:21 p34 [ 63.623733] md: bind<sda2> May 29 17:39:21 p34 [ 63.624059] md: bind<sdb2> May 29 17:39:21 p34 [ 63.624439] md: running: May 29 17:39:21 p34 May 29 17:39:21 p34 [ 63.627438] raid1: raid set md1 active with 2 out of 2 mirrors May 29 17:39:21 p34 [ 63.628555] md: considering sdb1 ... May 29 17:39:21 p34 [ 63.628883] md: adding sdb1 ... May 29 17:39:21 p34 [ 63.629302] md: adding sda1 ... May 29 17:39:21 p34 [ 63.629411] md: created md0 May 29 17:39:21 p34 [ 63.629576] md: bind<sda1> May 29 17:39:21 p34 [ 63.629882] md: bind<sdb1> May 29 17:39:21 p34 [ 63.630233] md: running: May 29 17:39:21 p34 May 29 17:39:21 p34 [ 63.633438] raid1: raid set md0 active with 2 out of 2 mirrors May 29 17:39:21 p34 [ 63.634598] md: ... autorun DONE. May 29 17:39:21 p34 [ 63.695456] UDF-fs: No VRS found May 29 17:39:21 p34 [ 63.699158] Filesystem "md2": Disabling barriers, not supported by the underlying device May 29 17:39:21 p34 [ 63.713776] XFS mounting filesystem md2 May 29 17:39:21 p34 [ 63.813743] VFS: Mounted root (xfs filesystem) readonly. May 29 17:39:21 p34 [ 63.814115] Freeing unused kernel memory: 220k freed May 29 17:40:39 p34 [ 141.447304] Adding 16787768k swap on /dev/md0. Priority:-1 extents:1 across:16787768k May 29 17:40:40 p34 [ 142.497721] Filesystem "md2": Disabling barriers, not supported by the underlying device May 29 17:41:04 p34 [ 166.716017] kjournald starting. Commit interval 5 seconds May 29 17:41:04 p34 [ 166.729375] EXT3 FS on md1, May 29 17:41:04 p34 internal journal May 29 17:41:04 p34 [ 166.729663] EXT3-fs: mounted filesystem with ordered data mode. May 29 17:41:04 p34 [ 166.751799] Filesystem "md3": Disabling barriers, not supported by the underlying device May 29 17:41:04 p34 [ 166.758717] XFS mounting filesystem md3 May 29 17:41:54 p34 [ 216.821357] e1000: eth1: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX May 29 17:42:29 p34 [ 251.481399] process `syslogd' is using obsolete setsockopt SO_BSDCOMPAT May 29 17:46:42 p34 [ 504.074171] mtrr: no more MTRRs available - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists