linux-kernel - Re: SATA Harddisk speed drop of 100 MB/s

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20070623102949.09e36fb9.akpm@linux-foundation.org>
Date:	Sat, 23 Jun 2007 10:29:49 -0700
From:	Andrew Morton <akpm@...ux-foundation.org>
To:	Carlo Wood <carlo@...noe.com>
Cc:	Henrique de Moraes Holschuh <hmh@....eng.br>,
	Arjan van de Ven <arjan@...radead.org>,
	Jeff Garzik <jeff@...zik.org>, linux-kernel@...r.kernel.org
Subject: Re: SATA Harddisk speed drop of 100 MB/s

On Sat, 23 Jun 2007 04:59:06 +0200 Carlo Wood <carlo@...noe.com> wrote:

> On Fri, Jun 22, 2007 at 10:31:32PM -0300, Henrique de Moraes Holschuh wrote:
> > for i in /sys/block/sd*/queue/scheduler ; do echo -n "scheduler for $i was:" ; cat $i ; echo anticipatory > $i ; done
> > 
> > Should show you the scheduler for all libata/scsi discs, and switch to
> > anticipatory.  It probably works for hd* as well, but I don't have any
> > around to test.
> > 
> > I had ridiculous md raid performance (on resync) using cfq at least once.
> > Unfortunately I never bothered trying to track it down, and I didn't check
> > the throughput after the resync was done either. Also, I don't recall the
> > kernel version, but it was either 2.6.18 or 2.6.20.
> 
> Just one kernel version? The problem here is in every
> kernel revision after 551c012d7eea3dc5ec063c7ff9c718d39e77634f
> 
> 2.6.20-rc2,rc3,rc4,rc5,rc6,rc7 ... 2.6.20 ... 2.6.21 ... 2.6.22-rc5
> 
> noop:
>  Timing buffered disk reads:  254 MB in  3.00 seconds =  84.66 MB/sec
> 
> anticipatory:
>  Timing buffered disk reads:  252 MB in  3.02 seconds =  83.43 MB/sec
> 
> deadline:
>  Timing buffered disk reads:  258 MB in  3.02 seconds =  85.41 MB/sec
> 
> cfq:
>  Timing buffered disk reads:  194 MB in  3.03 seconds =  64.06 MB/sec
> 
> The normal value is cfq. So, all other schedulars are somewhat faster,
> but still far from the correct 165 MB/s.
> 

Please see http://bugzilla.kernel.org/show_bug.cgi?id=8636

In that report a pretty large slowdown with CFQ has been identified.
Jens has plunked a patch in there (Comment #50) and then ran away on
vacation.

If someone can test that patch and demonstrate its goodness, I'll
queue it up, thanks.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/