| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20070710183953.GA8898@havoc.gtf.org>
Date: Tue, 10 Jul 2007 14:39:53 -0400
From: Jeff Garzik <jeff@...zik.org>
To: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Cc: netdev@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>
Subject: [git patches] net driver updates
Various minor updates. The only thing of note is sk98lin driver removal.
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git upstream-linus
to receive the following updates:
Documentation/feature-removal-schedule.txt | 8 -
Documentation/networking/00-INDEX | 3 -
Documentation/networking/sk98lin.txt | 568 --
MAINTAINERS | 7 +
drivers/misc/eeprom_93cx6.c | 6 +-
drivers/net/3c59x.c | 2 +-
drivers/net/8390.h | 11 +
drivers/net/Kconfig | 116 +-
drivers/net/Makefile | 4 +-
drivers/net/atari_pamsnet.c | 62 +-
drivers/net/atl1/atl1_main.c | 3 +-
drivers/net/ax88796.c | 952 ++++
drivers/net/bonding/bond_main.c | 16 +-
drivers/net/bonding/bonding.h | 2 -
drivers/net/cxgb3/cxgb3_main.c | 5 +-
drivers/net/e100.c | 12 +-
drivers/net/ehea/ehea.h | 8 +-
drivers/net/ehea/ehea_main.c | 23 +-
drivers/net/ioc3-eth.c | 41 +-
drivers/net/macmace.c | 2 +-
drivers/net/myri10ge/myri10ge.c | 3 +-
drivers/net/netxen/netxen_nic.h | 103 -
drivers/net/netxen/netxen_nic_main.c | 97 +
drivers/net/pcmcia/pcnet_cs.c | 1 +
drivers/net/phy/marvell.c | 123 +-
drivers/net/ps3_gelic_net.c | 1576 ++++++
drivers/net/ps3_gelic_net.h | 239 +
drivers/net/rrunner.c | 2 +-
drivers/net/s2io.c | 2 +-
drivers/net/sis900.c | 2 +-
drivers/net/sk98lin/Makefile | 87 -
drivers/net/sk98lin/h/lm80.h | 179 -
drivers/net/sk98lin/h/skaddr.h | 285 -
drivers/net/sk98lin/h/skcsum.h | 213 -
drivers/net/sk98lin/h/skdebug.h | 74 -
drivers/net/sk98lin/h/skdrv1st.h | 188 -
drivers/net/sk98lin/h/skdrv2nd.h | 447 --
drivers/net/sk98lin/h/skerror.h | 55 -
drivers/net/sk98lin/h/skgedrv.h | 51 -
drivers/net/sk98lin/h/skgehw.h | 2126 -------
drivers/net/sk98lin/h/skgehwt.h | 48 -
drivers/net/sk98lin/h/skgei2c.h | 210 -
drivers/net/sk98lin/h/skgeinit.h | 797 ---
drivers/net/sk98lin/h/skgepnm2.h | 334 --
drivers/net/sk98lin/h/skgepnmi.h | 962 ----
drivers/net/sk98lin/h/skgesirq.h | 110 -
drivers/net/sk98lin/h/ski2c.h | 174 -
drivers/net/sk98lin/h/skqueue.h | 94 -
drivers/net/sk98lin/h/skrlmt.h | 438 --
drivers/net/sk98lin/h/sktimer.h | 63 -
drivers/net/sk98lin/h/sktypes.h | 69 -
drivers/net/sk98lin/h/skversion.h | 38 -
drivers/net/sk98lin/h/skvpd.h | 248 -
drivers/net/sk98lin/h/xmac_ii.h | 1579 ------
drivers/net/sk98lin/skaddr.c | 1788 ------
drivers/net/sk98lin/skdim.c | 742 ---
drivers/net/sk98lin/skethtool.c | 628 ---
drivers/net/sk98lin/skge.c | 5211 ------------------
drivers/net/sk98lin/skgehwt.c | 171 -
drivers/net/sk98lin/skgeinit.c | 2005 -------
drivers/net/sk98lin/skgemib.c | 1075 ----
drivers/net/sk98lin/skgepnmi.c | 8210 ----------------------------
drivers/net/sk98lin/skgesirq.c | 2229 --------
drivers/net/sk98lin/ski2c.c | 1296 -----
drivers/net/sk98lin/sklm80.c | 141 -
drivers/net/sk98lin/skqueue.c | 179 -
drivers/net/sk98lin/skrlmt.c | 3257 -----------
drivers/net/sk98lin/sktimer.c | 250 -
drivers/net/sk98lin/skvpd.c | 1091 ----
drivers/net/sk98lin/skxmac2.c | 4160 --------------
drivers/net/sky2.c | 449 ++-
drivers/net/sky2.h | 4 +
drivers/net/spider_net.c | 59 +-
drivers/net/sunhme.c | 2 +-
drivers/net/tokenring/3c359.c | 2 +-
drivers/net/ucc_geth.c | 2 +-
drivers/net/usb/usbnet.c | 2 +-
include/net/ax88796.h | 27 +
net/ipv6/addrconf.c | 3 +
79 files changed, 3531 insertions(+), 42320 deletions(-)
delete mode 100644 Documentation/networking/sk98lin.txt
create mode 100644 drivers/net/ax88796.c
create mode 100644 drivers/net/ps3_gelic_net.c
create mode 100644 drivers/net/ps3_gelic_net.h
delete mode 100644 drivers/net/sk98lin/Makefile
delete mode 100644 drivers/net/sk98lin/h/lm80.h
delete mode 100644 drivers/net/sk98lin/h/skaddr.h
delete mode 100644 drivers/net/sk98lin/h/skcsum.h
delete mode 100644 drivers/net/sk98lin/h/skdebug.h
delete mode 100644 drivers/net/sk98lin/h/skdrv1st.h
delete mode 100644 drivers/net/sk98lin/h/skdrv2nd.h
delete mode 100644 drivers/net/sk98lin/h/skerror.h
delete mode 100644 drivers/net/sk98lin/h/skgedrv.h
delete mode 100644 drivers/net/sk98lin/h/skgehw.h
delete mode 100644 drivers/net/sk98lin/h/skgehwt.h
delete mode 100644 drivers/net/sk98lin/h/skgei2c.h
delete mode 100644 drivers/net/sk98lin/h/skgeinit.h
delete mode 100644 drivers/net/sk98lin/h/skgepnm2.h
delete mode 100644 drivers/net/sk98lin/h/skgepnmi.h
delete mode 100644 drivers/net/sk98lin/h/skgesirq.h
delete mode 100644 drivers/net/sk98lin/h/ski2c.h
delete mode 100644 drivers/net/sk98lin/h/skqueue.h
delete mode 100644 drivers/net/sk98lin/h/skrlmt.h
delete mode 100644 drivers/net/sk98lin/h/sktimer.h
delete mode 100644 drivers/net/sk98lin/h/sktypes.h
delete mode 100644 drivers/net/sk98lin/h/skversion.h
delete mode 100644 drivers/net/sk98lin/h/skvpd.h
delete mode 100644 drivers/net/sk98lin/h/xmac_ii.h
delete mode 100644 drivers/net/sk98lin/skaddr.c
delete mode 100644 drivers/net/sk98lin/skdim.c
delete mode 100644 drivers/net/sk98lin/skethtool.c
delete mode 100644 drivers/net/sk98lin/skge.c
delete mode 100644 drivers/net/sk98lin/skgehwt.c
delete mode 100644 drivers/net/sk98lin/skgeinit.c
delete mode 100644 drivers/net/sk98lin/skgemib.c
delete mode 100644 drivers/net/sk98lin/skgepnmi.c
delete mode 100644 drivers/net/sk98lin/skgesirq.c
delete mode 100644 drivers/net/sk98lin/ski2c.c
delete mode 100644 drivers/net/sk98lin/sklm80.c
delete mode 100644 drivers/net/sk98lin/skqueue.c
delete mode 100644 drivers/net/sk98lin/skrlmt.c
delete mode 100644 drivers/net/sk98lin/sktimer.c
delete mode 100644 drivers/net/sk98lin/skvpd.c
delete mode 100644 drivers/net/sk98lin/skxmac2.c
create mode 100644 include/net/ax88796.h
Adrian Bunk (5):
sis900_mii_probe() must be __devinit
tokenring/3c359.c:xl_init() must be __devinit
rrunner.c:rr_init() must be __devinit
sunhme.c:quattro_pci_find() must be __devinit
bonding/bond_main.c: make 2 functions static
Alan Cox (1):
IOC3: Switch to pci refcounting safe APIs
Alexey Dobriyan (2):
macmace: use "unsigned long flags;"
atl1: remove write-only var in tx handler
Ben Dooks (1):
AX88796 network driver
David Graham (1):
e100: Fix Tyan motherboard e100 not receiving IPMI commands
Francois Romieu (1):
eeprom_93cx6: shorten pulse timing to match spec (bis)
Ishizaki Kou (1):
spidernet: improve interrupt handling
Jan-Bernd Themann (1):
eHEA: Capability flag for DLPAR support
Jay Vosburgh (1):
bonding / ipv6: no addrconf for slaves separately from master
Jeff Garzik (2):
Remove sk98lin ethernet driver.
[netdrvr] Fix dependencies for ax88796 ne2k clone driver
Marcin Juszkiewicz (1):
PCMCIA: add Socket Ethernet card into pcnet_cs
Masakazu Mokuno (1):
ps3: gigabit ethernet driver for PS3, take3
Olof Johansson (2):
phylib: cleanup marvell.c a bit
phylib: Add Marvell 88E1112 phy id
Peter Korsgaard (1):
Cleanup usbnet_probe() return value handling
Rolf Eike Beer (1):
Fix typo in drivers/net/s2io.c
Steffen Klassert (1):
3cSOHO100-TX needs EXTRA_PREAMBLE
Stephen Hemminger (13):
sky2: restore workarounds for lost interrupts
sky2: carrier management
sky2: debug interface
sky2: check for more work before leaving NAPI
sky2: receive fill
sky2: unmark as EXPERIMENTAL
sky2: add support for read/write of EEPROM
sky2: check drop truncated packets
sky2: use roundup() macro
sky2: use upper_32_bits() macro
sky2: remove some leftover debug messages
sky2: 1.16 version
netxen: deinline and sparse fix
Timur Tabi (1):
QE Ethernet driver writes to wrong register to mask interrupts
Yoann Padioleau (1):
atari_pamsnet.c: old declaration ritchie style fix
vignesh babu (2):
use is_power_of_2() in cxgb3/cxgb3_main.c
Use is_power_of_2() in myri10ge/myri10ge.c
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 51b369e..3a159da 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -248,14 +248,6 @@ Who: Len Brown <len.brown@...el.com>
---------------------------
-What: sk98lin network driver
-When: July 2007
-Why: In kernel tree version of driver is unmaintained. Sk98lin driver
- replaced by the skge driver.
-Who: Stephen Hemminger <shemminger@...l.org>
-
----------------------------
-
What: Compaq touchscreen device emulation
When: Oct 2007
Files: drivers/input/tsdev.c
diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX
index 153d84d..d63f480 100644
--- a/Documentation/networking/00-INDEX
+++ b/Documentation/networking/00-INDEX
@@ -96,9 +96,6 @@ routing.txt
- the new routing mechanism
shaper.txt
- info on the module that can shape/limit transmitted traffic.
-sk98lin.txt
- - Marvell Yukon Chipset / SysKonnect SK-98xx compliant Gigabit
- Ethernet Adapter family driver info
skfp.txt
- SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info.
smc9.txt
diff --git a/Documentation/networking/sk98lin.txt b/Documentation/networking/sk98lin.txt
deleted file mode 100644
index 8590a95..0000000
--- a/Documentation/networking/sk98lin.txt
+++ /dev/null
@@ -1,568 +0,0 @@
-(C)Copyright 1999-2004 Marvell(R).
-All rights reserved
-===========================================================================
-
-sk98lin.txt created 13-Feb-2004
-
-Readme File for sk98lin v6.23
-Marvell Yukon/SysKonnect SK-98xx Gigabit Ethernet Adapter family driver for LINUX
-
-This file contains
- 1 Overview
- 2 Required Files
- 3 Installation
- 3.1 Driver Installation
- 3.2 Inclusion of adapter at system start
- 4 Driver Parameters
- 4.1 Per-Port Parameters
- 4.2 Adapter Parameters
- 5 Large Frame Support
- 6 VLAN and Link Aggregation Support (IEEE 802.1, 802.1q, 802.3ad)
- 7 Troubleshooting
-
-===========================================================================
-
-
-1 Overview
-===========
-
-The sk98lin driver supports the Marvell Yukon and SysKonnect
-SK-98xx/SK-95xx compliant Gigabit Ethernet Adapter on Linux. It has
-been tested with Linux on Intel/x86 machines.
-***
-
-
-2 Required Files
-=================
-
-The linux kernel source.
-No additional files required.
-***
-
-
-3 Installation
-===============
-
-It is recommended to download the latest version of the driver from the
-SysKonnect web site www.syskonnect.com. If you have downloaded the latest
-driver, the Linux kernel has to be patched before the driver can be
-installed. For details on how to patch a Linux kernel, refer to the
-patch.txt file.
-
-3.1 Driver Installation
-------------------------
-
-The following steps describe the actions that are required to install
-the driver and to start it manually. These steps should be carried
-out for the initial driver setup. Once confirmed to be ok, they can
-be included in the system start.
-
-NOTE 1: To perform the following tasks you need 'root' access.
-
-NOTE 2: In case of problems, please read the section "Troubleshooting"
- below.
-
-The driver can either be integrated into the kernel or it can be compiled
-as a module. Select the appropriate option during the kernel
-configuration.
-
-Compile/use the driver as a module
-----------------------------------
-To compile the driver, go to the directory /usr/src/linux and
-execute the command "make menuconfig" or "make xconfig" and proceed as
-follows:
-
-To integrate the driver permanently into the kernel, proceed as follows:
-
-1. Select the menu "Network device support" and then "Ethernet(1000Mbit)"
-2. Mark "Marvell Yukon Chipset / SysKonnect SK-98xx family support"
- with (*)
-3. Build a new kernel when the configuration of the above options is
- finished.
-4. Install the new kernel.
-5. Reboot your system.
-
-To use the driver as a module, proceed as follows:
-
-1. Enable 'loadable module support' in the kernel.
-2. For automatic driver start, enable the 'Kernel module loader'.
-3. Select the menu "Network device support" and then "Ethernet(1000Mbit)"
-4. Mark "Marvell Yukon Chipset / SysKonnect SK-98xx family support"
- with (M)
-5. Execute the command "make modules".
-6. Execute the command "make modules_install".
- The appropriate modules will be installed.
-7. Reboot your system.
-
-
-Load the module manually
-------------------------
-To load the module manually, proceed as follows:
-
-1. Enter "modprobe sk98lin".
-2. If a Marvell Yukon or SysKonnect SK-98xx adapter is installed in
- your computer and you have a /proc file system, execute the command:
- "ls /proc/net/sk98lin/"
- This should produce an output containing a line with the following
- format:
- eth0 eth1 ...
- which indicates that your adapter has been found and initialized.
-
- NOTE 1: If you have more than one Marvell Yukon or SysKonnect SK-98xx
- adapter installed, the adapters will be listed as 'eth0',
- 'eth1', 'eth2', etc.
- For each adapter, repeat steps 3 and 4 below.
-
- NOTE 2: If you have other Ethernet adapters installed, your Marvell
- Yukon or SysKonnect SK-98xx adapter will be mapped to the
- next available number, e.g. 'eth1'. The mapping is executed
- automatically.
- The module installation message (displayed either in a system
- log file or on the console) prints a line for each adapter
- found containing the corresponding 'ethX'.
-
-3. Select an IP address and assign it to the respective adapter by
- entering:
- ifconfig eth0 <ip-address>
- With this command, the adapter is connected to the Ethernet.
-
- SK-98xx Gigabit Ethernet Server Adapters: The yellow LED on the adapter
- is now active, the link status LED of the primary port is active and
- the link status LED of the secondary port (on dual port adapters) is
- blinking (if the ports are connected to a switch or hub).
- SK-98xx V2.0 Gigabit Ethernet Adapters: The link status LED is active.
- In addition, you will receive a status message on the console stating
- "ethX: network connection up using port Y" and showing the selected
- connection parameters (x stands for the ethernet device number
- (0,1,2, etc), y stands for the port name (A or B)).
-
- NOTE: If you are in doubt about IP addresses, ask your network
- administrator for assistance.
-
-4. Your adapter should now be fully operational.
- Use 'ping <otherstation>' to verify the connection to other computers
- on your network.
-5. To check the adapter configuration view /proc/net/sk98lin/[devicename].
- For example by executing:
- "cat /proc/net/sk98lin/eth0"
-
-Unload the module
------------------
-To stop and unload the driver modules, proceed as follows:
-
-1. Execute the command "ifconfig eth0 down".
-2. Execute the command "rmmod sk98lin".
-
-3.2 Inclusion of adapter at system start
------------------------------------------
-
-Since a large number of different Linux distributions are
-available, we are unable to describe a general installation procedure
-for the driver module.
-Because the driver is now integrated in the kernel, installation should
-be easy, using the standard mechanism of your distribution.
-Refer to the distribution's manual for installation of ethernet adapters.
-
-***
-
-4 Driver Parameters
-====================
-
-Parameters can be set at the command line after the module has been
-loaded with the command 'modprobe'.
-In some distributions, the configuration tools are able to pass parameters
-to the driver module.
-
-If you use the kernel module loader, you can set driver parameters
-in the file /etc/modprobe.conf (or /etc/modules.conf in 2.4 or earlier).
-To set the driver parameters in this file, proceed as follows:
-
-1. Insert a line of the form :
- options sk98lin ...
- For "...", the same syntax is required as described for the command
- line parameters of modprobe below.
-2. To activate the new parameters, either reboot your computer
- or
- unload and reload the driver.
- The syntax of the driver parameters is:
-
- modprobe sk98lin parameter=value1[,value2[,value3...]]
-
- where value1 refers to the first adapter, value2 to the second etc.
-
-NOTE: All parameters are case sensitive. Write them exactly as shown
- below.
-
-Example:
-Suppose you have two adapters. You want to set auto-negotiation
-on the first adapter to ON and on the second adapter to OFF.
-You also want to set DuplexCapabilities on the first adapter
-to FULL, and on the second adapter to HALF.
-Then, you must enter:
-
- modprobe sk98lin AutoNeg_A=On,Off DupCap_A=Full,Half
-
-NOTE: The number of adapters that can be configured this way is
- limited in the driver (file skge.c, constant SK_MAX_CARD_PARAM).
- The current limit is 16. If you happen to install
- more adapters, adjust this and recompile.
-
-
-4.1 Per-Port Parameters
-------------------------
-
-These settings are available for each port on the adapter.
-In the following description, '?' stands for the port for
-which you set the parameter (A or B).
-
-Speed
------
-Parameter: Speed_?
-Values: 10, 100, 1000, Auto
-Default: Auto
-
-This parameter is used to set the speed capabilities. It is only valid
-for the SK-98xx V2.0 copper adapters.
-Usually, the speed is negotiated between the two ports during link
-establishment. If this fails, a port can be forced to a specific setting
-with this parameter.
-
-Auto-Negotiation
-----------------
-Parameter: AutoNeg_?
-Values: On, Off, Sense
-Default: On
-
-The "Sense"-mode automatically detects whether the link partner supports
-auto-negotiation or not.
-
-Duplex Capabilities
--------------------
-Parameter: DupCap_?
-Values: Half, Full, Both
-Default: Both
-
-This parameters is only relevant if auto-negotiation for this port is
-not set to "Sense". If auto-negotiation is set to "On", all three values
-are possible. If it is set to "Off", only "Full" and "Half" are allowed.
-This parameter is useful if your link partner does not support all
-possible combinations.
-
-Flow Control
-------------
-Parameter: FlowCtrl_?
-Values: Sym, SymOrRem, LocSend, None
-Default: SymOrRem
-
-This parameter can be used to set the flow control capabilities the
-port reports during auto-negotiation. It can be set for each port
-individually.
-Possible modes:
- -- Sym = Symmetric: both link partners are allowed to send
- PAUSE frames
- -- SymOrRem = SymmetricOrRemote: both or only remote partner
- are allowed to send PAUSE frames
- -- LocSend = LocalSend: only local link partner is allowed
- to send PAUSE frames
- -- None = no link partner is allowed to send PAUSE frames
-
-NOTE: This parameter is ignored if auto-negotiation is set to "Off".
-
-Role in Master-Slave-Negotiation (1000Base-T only)
---------------------------------------------------
-Parameter: Role_?
-Values: Auto, Master, Slave
-Default: Auto
-
-This parameter is only valid for the SK-9821 and SK-9822 adapters.
-For two 1000Base-T ports to communicate, one must take the role of the
-master (providing timing information), while the other must be the
-slave. Usually, this is negotiated between the two ports during link
-establishment. If this fails, a port can be forced to a specific setting
-with this parameter.
-
-
-4.2 Adapter Parameters
------------------------
-
-Connection Type (SK-98xx V2.0 copper adapters only)
----------------
-Parameter: ConType
-Values: Auto, 100FD, 100HD, 10FD, 10HD
-Default: Auto
-
-The parameter 'ConType' is a combination of all five per-port parameters
-within one single parameter. This simplifies the configuration of both ports
-of an adapter card! The different values of this variable reflect the most
-meaningful combinations of port parameters.
-
-The following table shows the values of 'ConType' and the corresponding
-combinations of the per-port parameters:
-
- ConType | DupCap AutoNeg FlowCtrl Role Speed
- ----------+------------------------------------------------------
- Auto | Both On SymOrRem Auto Auto
- 100FD | Full Off None Auto (ignored) 100
- 100HD | Half Off None Auto (ignored) 100
- 10FD | Full Off None Auto (ignored) 10
- 10HD | Half Off None Auto (ignored) 10
-
-Stating any other port parameter together with this 'ConType' variable
-will result in a merged configuration of those settings. This due to
-the fact, that the per-port parameters (e.g. Speed_? ) have a higher
-priority than the combined variable 'ConType'.
-
-NOTE: This parameter is always used on both ports of the adapter card.
-
-Interrupt Moderation
---------------------
-Parameter: Moderation
-Values: None, Static, Dynamic
-Default: None
-
-Interrupt moderation is employed to limit the maximum number of interrupts
-the driver has to serve. That is, one or more interrupts (which indicate any
-transmit or receive packet to be processed) are queued until the driver
-processes them. When queued interrupts are to be served, is determined by the
-'IntsPerSec' parameter, which is explained later below.
-
-Possible modes:
-
- -- None - No interrupt moderation is applied on the adapter card.
- Therefore, each transmit or receive interrupt is served immediately
- as soon as it appears on the interrupt line of the adapter card.
-
- -- Static - Interrupt moderation is applied on the adapter card.
- All transmit and receive interrupts are queued until a complete
- moderation interval ends. If such a moderation interval ends, all
- queued interrupts are processed in one big bunch without any delay.
- The term 'static' reflects the fact, that interrupt moderation is
- always enabled, regardless how much network load is currently
- passing via a particular interface. In addition, the duration of
- the moderation interval has a fixed length that never changes while
- the driver is operational.
-
- -- Dynamic - Interrupt moderation might be applied on the adapter card,
- depending on the load of the system. If the driver detects that the
- system load is too high, the driver tries to shield the system against
- too much network load by enabling interrupt moderation. If - at a later
- time - the CPU utilization decreases again (or if the network load is
- negligible) the interrupt moderation will automatically be disabled.
-
-Interrupt moderation should be used when the driver has to handle one or more
-interfaces with a high network load, which - as a consequence - leads also to a
-high CPU utilization. When moderation is applied in such high network load
-situations, CPU load might be reduced by 20-30%.
-
-NOTE: The drawback of using interrupt moderation is an increase of the round-
-trip-time (RTT), due to the queueing and serving of interrupts at dedicated
-moderation times.
-
-Interrupts per second
----------------------
-Parameter: IntsPerSec
-Values: 30...40000 (interrupts per second)
-Default: 2000
-
-This parameter is only used if either static or dynamic interrupt moderation
-is used on a network adapter card. Using this parameter if no moderation is
-applied will lead to no action performed.
-
-This parameter determines the length of any interrupt moderation interval.
-Assuming that static interrupt moderation is to be used, an 'IntsPerSec'
-parameter value of 2000 will lead to an interrupt moderation interval of
-500 microseconds.
-
-NOTE: The duration of the moderation interval is to be chosen with care.
-At first glance, selecting a very long duration (e.g. only 100 interrupts per
-second) seems to be meaningful, but the increase of packet-processing delay
-is tremendous. On the other hand, selecting a very short moderation time might
-compensate the use of any moderation being applied.
-
-
-Preferred Port
---------------
-Parameter: PrefPort
-Values: A, B
-Default: A
-
-This is used to force the preferred port to A or B (on dual-port network
-adapters). The preferred port is the one that is used if both are detected
-as fully functional.
-
-RLMT Mode (Redundant Link Management Technology)
-------------------------------------------------
-Parameter: RlmtMode
-Values: CheckLinkState,CheckLocalPort, CheckSeg, DualNet
-Default: CheckLinkState
-
-RLMT monitors the status of the port. If the link of the active port
-fails, RLMT switches immediately to the standby link. The virtual link is
-maintained as long as at least one 'physical' link is up.
-
-Possible modes:
-
- -- CheckLinkState - Check link state only: RLMT uses the link state
- reported by the adapter hardware for each individual port to
- determine whether a port can be used for all network traffic or
- not.
-
- -- CheckLocalPort - In this mode, RLMT monitors the network path
- between the two ports of an adapter by regularly exchanging packets
- between them. This mode requires a network configuration in which
- the two ports are able to "see" each other (i.e. there must not be
- any router between the ports).
-
- -- CheckSeg - Check local port and segmentation: This mode supports the
- same functions as the CheckLocalPort mode and additionally checks
- network segmentation between the ports. Therefore, this mode is only
- to be used if Gigabit Ethernet switches are installed on the network
- that have been configured to use the Spanning Tree protocol.
-
- -- DualNet - In this mode, ports A and B are used as separate devices.
- If you have a dual port adapter, port A will be configured as eth0
- and port B as eth1. Both ports can be used independently with
- distinct IP addresses. The preferred port setting is not used.
- RLMT is turned off.
-
-NOTE: RLMT modes CLP and CLPSS are designed to operate in configurations
- where a network path between the ports on one adapter exists.
- Moreover, they are not designed to work where adapters are connected
- back-to-back.
-***
-
-
-5 Large Frame Support
-======================
-
-The driver supports large frames (also called jumbo frames). Using large
-frames can result in an improved throughput if transferring large amounts
-of data.
-To enable large frames, set the MTU (maximum transfer unit) of the
-interface to the desired value (up to 9000), execute the following
-command:
- ifconfig eth0 mtu 9000
-This will only work if you have two adapters connected back-to-back
-or if you use a switch that supports large frames. When using a switch,
-it should be configured to allow large frames and auto-negotiation should
-be set to OFF. The setting must be configured on all adapters that can be
-reached by the large frames. If one adapter is not set to receive large
-frames, it will simply drop them.
-
-You can switch back to the standard ethernet frame size by executing the
-following command:
- ifconfig eth0 mtu 1500
-
-To permanently configure this setting, add a script with the 'ifconfig'
-line to the system startup sequence (named something like "S99sk98lin"
-in /etc/rc.d/rc2.d).
-***
-
-
-6 VLAN and Link Aggregation Support (IEEE 802.1, 802.1q, 802.3ad)
-==================================================================
-
-The Marvell Yukon/SysKonnect Linux drivers are able to support VLAN and
-Link Aggregation according to IEEE standards 802.1, 802.1q, and 802.3ad.
-These features are only available after installation of open source
-modules available on the Internet:
-For VLAN go to: http://www.candelatech.com/~greear/vlan.html
-For Link Aggregation go to: http://www.st.rim.or.jp/~yumo
-
-NOTE: SysKonnect GmbH does not offer any support for these open source
- modules and does not take the responsibility for any kind of
- failures or problems arising in connection with these modules.
-
-NOTE: Configuring Link Aggregation on a SysKonnect dual link adapter may
- cause problems when unloading the driver.
-
-
-7 Troubleshooting
-==================
-
-If any problems occur during the installation process, check the
-following list:
-
-
-Problem: The SK-98xx adapter cannot be found by the driver.
-Solution: In /proc/pci search for the following entry:
- 'Ethernet controller: SysKonnect SK-98xx ...'
- If this entry exists, the SK-98xx or SK-98xx V2.0 adapter has
- been found by the system and should be operational.
- If this entry does not exist or if the file '/proc/pci' is not
- found, there may be a hardware problem or the PCI support may
- not be enabled in your kernel.
- The adapter can be checked using the diagnostics program which
- is available on the SysKonnect web site:
- www.syskonnect.com
-
- Some COMPAQ machines have problems dealing with PCI under Linux.
- This problem is described in the 'PCI howto' document
- (included in some distributions or available from the
- web, e.g. at 'www.linux.org').
-
-
-Problem: Programs such as 'ifconfig' or 'route' cannot be found or the
- error message 'Operation not permitted' is displayed.
-Reason: You are not logged in as user 'root'.
-Solution: Logout and login as 'root' or change to 'root' via 'su'.
-
-
-Problem: Upon use of the command 'ping <address>' the message
- "ping: sendto: Network is unreachable" is displayed.
-Reason: Your route is not set correctly.
-Solution: If you are using RedHat, you probably forgot to set up the
- route in the 'network configuration'.
- Check the existing routes with the 'route' command and check
- if an entry for 'eth0' exists, and if so, if it is set correctly.
-
-
-Problem: The driver can be started, the adapter is connected to the
- network, but you cannot receive or transmit any packets;
- e.g. 'ping' does not work.
-Reason: There is an incorrect route in your routing table.
-Solution: Check the routing table with the command 'route' and read the
- manual help pages dealing with routes (enter 'man route').
-
-NOTE: Although the 2.2.x kernel versions generate the routing entry
- automatically, problems of this kind may occur here as well. We've
- come across a situation in which the driver started correctly at
- system start, but after the driver has been removed and reloaded,
- the route of the adapter's network pointed to the 'dummy0'device
- and had to be corrected manually.
-
-
-Problem: Your computer should act as a router between multiple
- IP subnetworks (using multiple adapters), but computers in
- other subnetworks cannot be reached.
-Reason: Either the router's kernel is not configured for IP forwarding
- or the routing table and gateway configuration of at least one
- computer is not working.
-
-Problem: Upon driver start, the following error message is displayed:
- "eth0: -- ERROR --
- Class: internal Software error
- Nr: 0xcc
- Msg: SkGeInitPort() cannot init running ports"
-Reason: You are using a driver compiled for single processor machines
- on a multiprocessor machine with SMP (Symmetric MultiProcessor)
- kernel.
-Solution: Configure your kernel appropriately and recompile the kernel or
- the modules.
-
-
-
-If your problem is not listed here, please contact SysKonnect's technical
-support for help (linux@...konnect.de).
-When contacting our technical support, please ensure that the following
-information is available:
-- System Manufacturer and HW Informations (CPU, Memory... )
-- PCI-Boards in your system
-- Distribution
-- Kernel version
-- Driver version
-***
-
-
-
-***End of Readme File***
diff --git a/MAINTAINERS b/MAINTAINERS
index 2c1dfb2..0223d6d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2930,6 +2930,13 @@ M: mikpe@...uu.se
L: linux-ide@...r.kernel.org
S: Maintained
+PS3 NETWORK SUPPORT
+P: Masakazu Mokuno
+M: mokuno@...sony.co.jp
+L: netdev@...r.kernel.org
+L: cbe-oss-dev@...abs.org
+S: Supported
+
PS3 PLATFORM SUPPORT
P: Geoff Levand
M: geoffrey.levand@...sony.com
diff --git a/drivers/misc/eeprom_93cx6.c b/drivers/misc/eeprom_93cx6.c
index ac515b0..ea55654 100644
--- a/drivers/misc/eeprom_93cx6.c
+++ b/drivers/misc/eeprom_93cx6.c
@@ -55,10 +55,10 @@ static inline void eeprom_93cx6_pulse_low(struct eeprom_93cx6 *eeprom)
/*
* Add a short delay for the pulse to work.
- * According to the specifications the minimal time
- * should be 450ns so a 1us delay is sufficient.
+ * According to the specifications the "maximum minimum"
+ * time should be 450ns.
*/
- udelay(1);
+ ndelay(450);
}
static void eeprom_93cx6_startup(struct eeprom_93cx6 *eeprom)
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index f26ca33..6deb20f 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -324,7 +324,7 @@ static struct vortex_chip_info {
{"3c980C Python-T",
PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, },
{"3cSOHO100-TX Hurricane",
- PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, },
+ PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
{"3c555 Laptop Hurricane",
PCI_USES_MASTER, IS_CYCLONE|EEPROM_8BIT|HAS_HWCKSM, 128, },
{"3c556 Laptop Tornado",
diff --git a/drivers/net/8390.h b/drivers/net/8390.h
index 414de5b..04ddec0 100644
--- a/drivers/net/8390.h
+++ b/drivers/net/8390.h
@@ -73,6 +73,9 @@ struct ei_device {
u32 *reg_offset; /* Register mapping table */
spinlock_t page_lock; /* Page register locks */
unsigned long priv; /* Private field to store bus IDs etc. */
+#ifdef AX88796_PLATFORM
+ unsigned char rxcr_base; /* default value for RXCR */
+#endif
};
/* The maximum number of 8390 interrupt service routines called per IRQ. */
@@ -86,11 +89,19 @@ struct ei_device {
/* Some generic ethernet register configurations. */
#define E8390_TX_IRQ_MASK 0xa /* For register EN0_ISR */
#define E8390_RX_IRQ_MASK 0x5
+
+#ifdef AX88796_PLATFORM
+#define E8390_RXCONFIG (ei_status.rxcr_base | 0x04)
+#define E8390_RXOFF (ei_status.rxcr_base | 0x20)
+#else
#define E8390_RXCONFIG 0x4 /* EN0_RXCR: broadcasts, no multicast,errors */
#define E8390_RXOFF 0x20 /* EN0_RXCR: Accept no packets */
+#endif
+
#define E8390_TXCONFIG 0x00 /* EN0_TXCR: Normal transmit mode */
#define E8390_TXOFF 0x02 /* EN0_TXCR: Transmitter off */
+
/* Register accessed at EN_CMD, the 8390 base addr. */
#define E8390_STOP 0x01 /* Stop and reset the chip */
#define E8390_START 0x02 /* Start the chip, clear reset */
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 5cc3d51..ec84684 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -197,6 +197,15 @@ config MACB
source "drivers/net/arm/Kconfig"
+config AX88796
+ tristate "ASIX AX88796 NE2000 clone support"
+ depends on ARM || MIPS
+ select CRC32
+ select MII
+ help
+ AX88796 driver, using platform bus to provide
+ chip detection and resources
+
config MACE
tristate "MACE (Power Mac ethernet) support"
depends on PPC_PMAC && PPC32
@@ -2105,7 +2114,7 @@ config SKGE
with better performance and more complete ethtool support.
It does not support the link failover and network management
- features that "portable" vendor supplied sk98lin driver does.
+ features available in the hardware.
This driver supports adapters based on the original Yukon chipset:
Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
@@ -2118,7 +2127,7 @@ config SKGE
will be called skge. This is recommended.
config SKY2
- tristate "SysKonnect Yukon2 support (EXPERIMENTAL)"
+ tristate "SysKonnect Yukon2 support"
depends on PCI
select CRC32
---help---
@@ -2133,92 +2142,15 @@ config SKY2
To compile this driver as a module, choose M here: the module
will be called sky2. This is recommended.
-config SK98LIN
- tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support (DEPRECATED)"
- depends on PCI
- ---help---
- Say Y here if you have a Marvell Yukon or SysKonnect SK-98xx/SK-95xx
- compliant Gigabit Ethernet Adapter.
-
- This driver supports the original Yukon chipset. This driver is
- deprecated and will be removed from the kernel in the near future,
- it has been replaced by the skge driver. skge is cleaner and
- seems to work better.
+config SKY2_DEBUG
+ bool "Debugging interface"
+ depends on SKY2 && DEBUG_FS
+ help
+ This option adds the ability to dump driver state for debugging.
+ The file debugfs/sky2/ethX displays the state of the internal
+ transmit and receive rings.
- This driver does not support the newer Yukon2 chipset. A separate
- driver, sky2, is provided to support Yukon2-based adapters.
-
- The following adapters are supported by this driver:
- - 3Com 3C940 Gigabit LOM Ethernet Adapter
- - 3Com 3C941 Gigabit LOM Ethernet Adapter
- - Allied Telesyn AT-2970LX Gigabit Ethernet Adapter
- - Allied Telesyn AT-2970LX/2SC Gigabit Ethernet Adapter
- - Allied Telesyn AT-2970SX Gigabit Ethernet Adapter
- - Allied Telesyn AT-2970SX/2SC Gigabit Ethernet Adapter
- - Allied Telesyn AT-2970TX Gigabit Ethernet Adapter
- - Allied Telesyn AT-2970TX/2TX Gigabit Ethernet Adapter
- - Allied Telesyn AT-2971SX Gigabit Ethernet Adapter
- - Allied Telesyn AT-2971T Gigabit Ethernet Adapter
- - Belkin Gigabit Desktop Card 10/100/1000Base-T Adapter, Copper RJ-45
- - EG1032 v2 Instant Gigabit Network Adapter
- - EG1064 v2 Instant Gigabit Network Adapter
- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Abit)
- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Albatron)
- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Asus)
- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (ECS)
- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Epox)
- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Foxconn)
- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Gigabyte)
- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Iwill)
- - Marvell 88E8050 Gigabit LOM Ethernet Adapter (Intel)
- - Marvell RDK-8001 Adapter
- - Marvell RDK-8002 Adapter
- - Marvell RDK-8003 Adapter
- - Marvell RDK-8004 Adapter
- - Marvell RDK-8006 Adapter
- - Marvell RDK-8007 Adapter
- - Marvell RDK-8008 Adapter
- - Marvell RDK-8009 Adapter
- - Marvell RDK-8010 Adapter
- - Marvell RDK-8011 Adapter
- - Marvell RDK-8012 Adapter
- - Marvell RDK-8052 Adapter
- - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (32 bit)
- - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (64 bit)
- - N-Way PCI-Bus Giga-Card 1000/100/10Mbps(L)
- - SK-9521 10/100/1000Base-T Adapter
- - SK-9521 V2.0 10/100/1000Base-T Adapter
- - SK-9821 Gigabit Ethernet Server Adapter (SK-NET GE-T)
- - SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T Adapter
- - SK-9822 Gigabit Ethernet Server Adapter (SK-NET GE-T dual link)
- - SK-9841 Gigabit Ethernet Server Adapter (SK-NET GE-LX)
- - SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter
- - SK-9842 Gigabit Ethernet Server Adapter (SK-NET GE-LX dual link)
- - SK-9843 Gigabit Ethernet Server Adapter (SK-NET GE-SX)
- - SK-9843 V2.0 Gigabit Ethernet 1000Base-SX Adapter
- - SK-9844 Gigabit Ethernet Server Adapter (SK-NET GE-SX dual link)
- - SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter
- - SK-9861 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition)
- - SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter
- - SK-9862 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition dual link)
- - SK-9871 Gigabit Ethernet Server Adapter (SK-NET GE-ZX)
- - SK-9871 V2.0 Gigabit Ethernet 1000Base-ZX Adapter
- - SK-9872 Gigabit Ethernet Server Adapter (SK-NET GE-ZX dual link)
- - SMC EZ Card 1000 (SMC9452TXV.2)
-
- The adapters support Jumbo Frames.
- The dual link adapters support link-failover and dual port features.
- Both Marvell Yukon and SysKonnect SK-98xx/SK-95xx adapters support
- the scatter-gather functionality with sendfile(). Please refer to
- <file:Documentation/networking/sk98lin.txt> for more information about
- optional driver parameters.
- Questions concerning this driver may be addressed to:
- <linux@...konnect.de>
-
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/kbuild/modules.txt>. The module will
- be called sk98lin. This is recommended.
+ If unsure, say N.
config VIA_VELOCITY
tristate "VIA Velocity support"
@@ -2268,6 +2200,16 @@ config TSI108_ETH
To compile this driver as a module, choose M here: the module
will be called tsi108_eth.
+config GELIC_NET
+ tristate "PS3 Gigabit Ethernet driver"
+ depends on PPC_PS3
+ help
+ This driver supports the network device on the PS3 game
+ console. This driver has built-in support for Ethernet.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ps3_gelic.
+
config GIANFAR
tristate "Gianfar Ethernet"
depends on 85xx || 83xx || PPC_86xx
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index eb62fb4..1bbcbed 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -60,10 +60,11 @@ obj-$(CONFIG_TIGON3) += tg3.o
obj-$(CONFIG_BNX2) += bnx2.o
spidernet-y += spider_net.o spider_net_ethtool.o
obj-$(CONFIG_SPIDER_NET) += spidernet.o sungem_phy.o
+obj-$(CONFIG_GELIC_NET) += ps3_gelic.o
+ps3_gelic-objs += ps3_gelic_net.o
obj-$(CONFIG_TC35815) += tc35815.o
obj-$(CONFIG_SKGE) += skge.o
obj-$(CONFIG_SKY2) += sky2.o
-obj-$(CONFIG_SK98LIN) += sk98lin/
obj-$(CONFIG_SKFP) += skfp/
obj-$(CONFIG_VIA_RHINE) += via-rhine.o
obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
@@ -107,6 +108,7 @@ obj-$(CONFIG_NET_SB1250_MAC) += sb1250-mac.o
obj-$(CONFIG_B44) += b44.o
obj-$(CONFIG_FORCEDETH) += forcedeth.o
obj-$(CONFIG_NE_H8300) += ne-h8300.o
+obj-$(CONFIG_AX88796) += ax88796.o
obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o
obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
diff --git a/drivers/net/atari_pamsnet.c b/drivers/net/atari_pamsnet.c
index 5471440..f735637 100644
--- a/drivers/net/atari_pamsnet.c
+++ b/drivers/net/atari_pamsnet.c
@@ -295,10 +295,7 @@ int if_up = 0;
/* Setup the DMA counter */
static void
-setup_dma (address, rw_flag, num_blocks)
- void *address;
- unsigned rw_flag;
- int num_blocks;
+setup_dma (void *address, unsigned rw_flag, int num_blocks)
{
WRITEMODE((unsigned) rw_flag | DMA_FDC | SEC_COUNT | REG_ACSI |
A1);
@@ -317,9 +314,7 @@ setup_dma (address, rw_flag, num_blocks)
/* Send the first byte of an command block */
static int
-send_first (target, byte)
- int target;
- unsigned char byte;
+send_first (int target, unsigned char byte)
{
rw = READ;
acsi_delay_end(COMMAND_DELAY);
@@ -338,10 +333,7 @@ send_first (target, byte)
/* Send the rest of an command block */
static int
-send_1_5 (lun, command, dma)
- int lun;
- unsigned char *command;
- int dma;
+send_1_5 (int lun, unsigned char *command, int dma)
{
int i, j;
@@ -371,8 +363,7 @@ get_status (void)
/* Calculate the number of received bytes */
static int
-calc_received (start_address)
- void *start_address;
+calc_received (void *start_address)
{
return (int)(
(((unsigned long)DMAHIGH << 16) | ((unsigned)DMAMID << 8) | DMALOW)
@@ -384,8 +375,7 @@ calc_received (start_address)
/* start() starts the PAM's DMA adaptor */
static void
-start (target)
- int target;
+start (int target)
{
send_first(target, START);
}
@@ -393,8 +383,7 @@ start (target)
/* stop() stops the PAM's DMA adaptor and returns a value of zero in case of success */
static int
-stop (target)
- int target;
+stop (int target)
{
int ret = -1;
unsigned char cmd_buffer[5];
@@ -415,8 +404,7 @@ bad:
/* testpkt() returns the number of received packets waiting in the queue */
static int
-testpkt(target)
- int target;
+testpkt(int target)
{
int ret = -1;
@@ -431,9 +419,7 @@ bad:
/* Please note: The buffer is for internal use only but must be defined! */
static int
-inquiry (target, buffer)
- int target;
- unsigned char *buffer;
+inquiry (int target, unsigned char *buffer)
{
int ret = -1;
unsigned char *vbuffer = phys_to_virt((unsigned long)buffer);
@@ -468,9 +454,7 @@ bad:
*/
static HADDR
-*read_hw_addr(target, buffer)
- int target;
- unsigned char *buffer;
+*read_hw_addr(int target, unsigned char *buffer)
{
HADDR *ret = 0;
unsigned char cmd_buffer[5];
@@ -491,9 +475,7 @@ bad:
}
static irqreturn_t
-pamsnet_intr(irq, data, fp)
- int irq;
- void *data;
+pamsnet_intr(int irq, void *data)
{
return IRQ_HANDLED;
}
@@ -501,9 +483,7 @@ pamsnet_intr(irq, data, fp)
/* receivepkt() loads a packet to a given buffer and returns its length */
static int
-receivepkt (target, buffer)
- int target;
- unsigned char *buffer;
+receivepkt (int target, unsigned char *buffer)
{
int ret = -1;
unsigned char cmd_buffer[5];
@@ -526,10 +506,7 @@ bad:
successfully */
static int
-sendpkt (target, buffer, length)
- int target;
- unsigned char *buffer;
- int length;
+sendpkt (int target, unsigned char *buffer, int length)
{
int ret = -1;
unsigned char cmd_buffer[5];
@@ -665,7 +642,8 @@ struct net_device * __init pamsnet_probe (int unit)
there is non-reboot way to recover if something goes wrong.
*/
static int
-pamsnet_open(struct net_device *dev) {
+pamsnet_open(struct net_device *dev)
+{
struct net_local *lp = netdev_priv(dev);
if (pamsnet_debug > 0)
@@ -694,7 +672,8 @@ pamsnet_open(struct net_device *dev) {
}
static int
-pamsnet_send_packet(struct sk_buff *skb, struct net_device *dev) {
+pamsnet_send_packet(struct sk_buff *skb, struct net_device *dev)
+{
struct net_local *lp = netdev_priv(dev);
unsigned long flags;
@@ -741,7 +720,8 @@ pamsnet_send_packet(struct sk_buff *skb, struct net_device *dev) {
/* We have a good packet(s), get it/them out of the buffers.
*/
static void
-pamsnet_poll_rx(struct net_device *dev) {
+pamsnet_poll_rx(struct net_device *dev)
+{
struct net_local *lp = netdev_priv(dev);
int boguscount;
int pkt_len;
@@ -816,7 +796,8 @@ pamsnet_poll_rx(struct net_device *dev) {
* passes them to the higher layers and restarts the timer.
*/
static void
-pamsnet_tick(unsigned long data) {
+pamsnet_tick(unsigned long data)
+{
struct net_device *dev = (struct net_device *)data;
struct net_local *lp = netdev_priv(dev);
@@ -832,7 +813,8 @@ pamsnet_tick(unsigned long data) {
/* The inverse routine to pamsnet_open().
*/
static int
-pamsnet_close(struct net_device *dev) {
+pamsnet_close(struct net_device *dev)
+{
struct net_local *lp = netdev_priv(dev);
if (pamsnet_debug > 0)
diff --git a/drivers/net/atl1/atl1_main.c b/drivers/net/atl1/atl1_main.c
index 6862c11..3bb40dd 100644
--- a/drivers/net/atl1/atl1_main.c
+++ b/drivers/net/atl1/atl1_main.c
@@ -634,14 +634,13 @@ static void atl1_intr_tx(struct atl1_adapter *adapter)
struct atl1_buffer *buffer_info;
u16 sw_tpd_next_to_clean;
u16 cmb_tpd_next_to_clean;
- u8 update = 0;
sw_tpd_next_to_clean = atomic_read(&tpd_ring->next_to_clean);
cmb_tpd_next_to_clean = le16_to_cpu(adapter->cmb.cmb->tpd_cons_idx);
while (cmb_tpd_next_to_clean != sw_tpd_next_to_clean) {
struct tx_packet_desc *tpd;
- update = 1;
+
tpd = ATL1_TPD_DESC(tpd_ring, sw_tpd_next_to_clean);
buffer_info = &tpd_ring->buffer_info[sw_tpd_next_to_clean];
if (buffer_info->dma) {
diff --git a/drivers/net/ax88796.c b/drivers/net/ax88796.c
new file mode 100644
index 0000000..d19874b
--- /dev/null
+++ b/drivers/net/ax88796.c
@@ -0,0 +1,952 @@
+/* drivers/net/ax88796.c
+ *
+ * Copyright 2005,2007 Simtec Electronics
+ * Ben Dooks <ben@...tec.co.uk>
+ *
+ * Asix AX88796 10/100 Ethernet controller support
+ * Based on ne.c, by Donald Becker, et-al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/isapnp.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+
+#include <net/ax88796.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+
+static int phy_debug = 0;
+
+/* Rename the lib8390.c functions to show that they are in this driver */
+#define __ei_open ax_ei_open
+#define __ei_close ax_ei_close
+#define __ei_poll ax_ei_poll
+#define __ei_tx_timeout ax_ei_tx_timeout
+#define __ei_interrupt ax_ei_interrupt
+#define ____alloc_ei_netdev ax__alloc_ei_netdev
+#define __NS8390_init ax_NS8390_init
+
+/* force unsigned long back to 'void __iomem *' */
+#define ax_convert_addr(_a) ((void __force __iomem *)(_a))
+
+#define ei_inb(_a) readb(ax_convert_addr(_a))
+#define ei_outb(_v, _a) writeb(_v, ax_convert_addr(_a))
+
+#define ei_inb_p(_a) ei_inb(_a)
+#define ei_outb_p(_v, _a) ei_outb(_v, _a)
+
+/* define EI_SHIFT() to take into account our register offsets */
+#define EI_SHIFT(x) (ei_local->reg_offset[(x)])
+
+/* Ensure we have our RCR base value */
+#define AX88796_PLATFORM
+
+static unsigned char version[] = "ax88796.c: Copyright 2005,2007 Simtec Electronics\n";
+
+#include "lib8390.c"
+
+#define DRV_NAME "ax88796"
+#define DRV_VERSION "1.00"
+
+/* from ne.c */
+#define NE_CMD EI_SHIFT(0x00)
+#define NE_RESET EI_SHIFT(0x1f)
+#define NE_DATAPORT EI_SHIFT(0x10)
+
+#define NE1SM_START_PG 0x20 /* First page of TX buffer */
+#define NE1SM_STOP_PG 0x40 /* Last page +1 of RX ring */
+#define NESM_START_PG 0x40 /* First page of TX buffer */
+#define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */
+
+/* device private data */
+
+struct ax_device {
+ struct timer_list mii_timer;
+ spinlock_t mii_lock;
+ struct mii_if_info mii;
+
+ u32 msg_enable;
+ void __iomem *map2;
+ struct platform_device *dev;
+ struct resource *mem;
+ struct resource *mem2;
+ struct ax_plat_data *plat;
+
+ unsigned char running;
+ unsigned char resume_open;
+
+ u32 reg_offsets[0x20];
+};
+
+static inline struct ax_device *to_ax_dev(struct net_device *dev)
+{
+ struct ei_device *ei_local = netdev_priv(dev);
+ return (struct ax_device *)(ei_local+1);
+}
+
+/* ax_initial_check
+ *
+ * do an initial probe for the card to check wether it exists
+ * and is functional
+ */
+
+static int ax_initial_check(struct net_device *dev)
+{
+ struct ei_device *ei_local = netdev_priv(dev);
+ void __iomem *ioaddr = ei_local->mem;
+ int reg0;
+ int regd;
+
+ reg0 = ei_inb(ioaddr);
+ if (reg0 == 0xFF)
+ return -ENODEV;
+
+ ei_outb(E8390_NODMA+E8390_PAGE1+E8390_STOP, ioaddr + E8390_CMD);
+ regd = ei_inb(ioaddr + 0x0d);
+ ei_outb(0xff, ioaddr + 0x0d);
+ ei_outb(E8390_NODMA+E8390_PAGE0, ioaddr + E8390_CMD);
+ ei_inb(ioaddr + EN0_COUNTER0); /* Clear the counter by reading. */
+ if (ei_inb(ioaddr + EN0_COUNTER0) != 0) {
+ ei_outb(reg0, ioaddr);
+ ei_outb(regd, ioaddr + 0x0d); /* Restore the old values. */
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+/* Hard reset the card. This used to pause for the same period that a
+ 8390 reset command required, but that shouldn't be necessary. */
+
+static void ax_reset_8390(struct net_device *dev)
+{
+ struct ei_device *ei_local = netdev_priv(dev);
+ unsigned long reset_start_time = jiffies;
+ void __iomem *addr = (void __iomem *)dev->base_addr;
+
+ if (ei_debug > 1)
+ printk(KERN_DEBUG "resetting the 8390 t=%ld...", jiffies);
+
+ ei_outb(ei_inb(addr + NE_RESET), addr + NE_RESET);
+
+ ei_status.txing = 0;
+ ei_status.dmaing = 0;
+
+ /* This check _should_not_ be necessary, omit eventually. */
+ while ((ei_inb(addr + EN0_ISR) & ENISR_RESET) == 0) {
+ if (jiffies - reset_start_time > 2*HZ/100) {
+ printk(KERN_WARNING "%s: %s did not complete.\n",
+ __FUNCTION__, dev->name);
+ break;
+ }
+ }
+
+ ei_outb(ENISR_RESET, addr + EN0_ISR); /* Ack intr. */
+}
+
+
+static void ax_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
+ int ring_page)
+{
+ struct ei_device *ei_local = netdev_priv(dev);
+ void __iomem *nic_base = ei_local->mem;
+
+ /* This *shouldn't* happen. If it does, it's the last thing you'll see */
+ if (ei_status.dmaing) {
+ printk(KERN_EMERG "%s: DMAing conflict in %s [DMAstat:%d][irqlock:%d].\n",
+ dev->name, __FUNCTION__,
+ ei_status.dmaing, ei_status.irqlock);
+ return;
+ }
+
+ ei_status.dmaing |= 0x01;
+ ei_outb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
+ ei_outb(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO);
+ ei_outb(0, nic_base + EN0_RCNTHI);
+ ei_outb(0, nic_base + EN0_RSARLO); /* On page boundary */
+ ei_outb(ring_page, nic_base + EN0_RSARHI);
+ ei_outb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
+
+ if (ei_status.word16)
+ readsw(nic_base + NE_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)>>1);
+ else
+ readsb(nic_base + NE_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr));
+
+ ei_outb(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
+ ei_status.dmaing &= ~0x01;
+
+ le16_to_cpus(&hdr->count);
+}
+
+
+/* Block input and output, similar to the Crynwr packet driver. If you
+ are porting to a new ethercard, look at the packet driver source for hints.
+ The NEx000 doesn't share the on-board packet memory -- you have to put
+ the packet out through the "remote DMA" dataport using ei_outb. */
+
+static void ax_block_input(struct net_device *dev, int count,
+ struct sk_buff *skb, int ring_offset)
+{
+ struct ei_device *ei_local = netdev_priv(dev);
+ void __iomem *nic_base = ei_local->mem;
+ char *buf = skb->data;
+
+ if (ei_status.dmaing) {
+ printk(KERN_EMERG "%s: DMAing conflict in ax_block_input "
+ "[DMAstat:%d][irqlock:%d].\n",
+ dev->name, ei_status.dmaing, ei_status.irqlock);
+ return;
+ }
+
+ ei_status.dmaing |= 0x01;
+
+ ei_outb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
+ ei_outb(count & 0xff, nic_base + EN0_RCNTLO);
+ ei_outb(count >> 8, nic_base + EN0_RCNTHI);
+ ei_outb(ring_offset & 0xff, nic_base + EN0_RSARLO);
+ ei_outb(ring_offset >> 8, nic_base + EN0_RSARHI);
+ ei_outb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
+
+ if (ei_status.word16) {
+ readsw(nic_base + NE_DATAPORT, buf, count >> 1);
+ if (count & 0x01)
+ buf[count-1] = ei_inb(nic_base + NE_DATAPORT);
+
+ } else {
+ readsb(nic_base + NE_DATAPORT, buf, count);
+ }
+
+ ei_status.dmaing &= ~1;
+}
+
+static void ax_block_output(struct net_device *dev, int count,
+ const unsigned char *buf, const int start_page)
+{
+ struct ei_device *ei_local = netdev_priv(dev);
+ void __iomem *nic_base = ei_local->mem;
+ unsigned long dma_start;
+
+ /* Round the count up for word writes. Do we need to do this?
+ What effect will an odd byte count have on the 8390?
+ I should check someday. */
+
+ if (ei_status.word16 && (count & 0x01))
+ count++;
+
+ /* This *shouldn't* happen. If it does, it's the last thing you'll see */
+ if (ei_status.dmaing) {
+ printk(KERN_EMERG "%s: DMAing conflict in %s."
+ "[DMAstat:%d][irqlock:%d]\n",
+ dev->name, __FUNCTION__,
+ ei_status.dmaing, ei_status.irqlock);
+ return;
+ }
+
+ ei_status.dmaing |= 0x01;
+ /* We should already be in page 0, but to be safe... */
+ ei_outb(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base + NE_CMD);
+
+ ei_outb(ENISR_RDC, nic_base + EN0_ISR);
+
+ /* Now the normal output. */
+ ei_outb(count & 0xff, nic_base + EN0_RCNTLO);
+ ei_outb(count >> 8, nic_base + EN0_RCNTHI);
+ ei_outb(0x00, nic_base + EN0_RSARLO);
+ ei_outb(start_page, nic_base + EN0_RSARHI);
+
+ ei_outb(E8390_RWRITE+E8390_START, nic_base + NE_CMD);
+ if (ei_status.word16) {
+ writesw(nic_base + NE_DATAPORT, buf, count>>1);
+ } else {
+ writesb(nic_base + NE_DATAPORT, buf, count);
+ }
+
+ dma_start = jiffies;
+
+ while ((ei_inb(nic_base + EN0_ISR) & ENISR_RDC) == 0) {
+ if (jiffies - dma_start > 2*HZ/100) { /* 20ms */
+ printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name);
+ ax_reset_8390(dev);
+ ax_NS8390_init(dev,1);
+ break;
+ }
+ }
+
+ ei_outb(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
+ ei_status.dmaing &= ~0x01;
+ return;
+}
+
+/* definitions for accessing MII/EEPROM interface */
+
+#define AX_MEMR EI_SHIFT(0x14)
+#define AX_MEMR_MDC (1<<0)
+#define AX_MEMR_MDIR (1<<1)
+#define AX_MEMR_MDI (1<<2)
+#define AX_MEMR_MDO (1<<3)
+#define AX_MEMR_EECS (1<<4)
+#define AX_MEMR_EEI (1<<5)
+#define AX_MEMR_EEO (1<<6)
+#define AX_MEMR_EECLK (1<<7)
+
+/* ax_mii_ei_outbits
+ *
+ * write the specified set of bits to the phy
+*/
+
+static void
+ax_mii_ei_outbits(struct net_device *dev, unsigned int bits, int len)
+{
+ struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+ void __iomem *memr_addr = (void __iomem *)dev->base_addr + AX_MEMR;
+ unsigned int memr;
+
+ /* clock low, data to output mode */
+ memr = ei_inb(memr_addr);
+ memr &= ~(AX_MEMR_MDC | AX_MEMR_MDIR);
+ ei_outb(memr, memr_addr);
+
+ for (len--; len >= 0; len--) {
+ if (bits & (1 << len))
+ memr |= AX_MEMR_MDO;
+ else
+ memr &= ~AX_MEMR_MDO;
+
+ ei_outb(memr, memr_addr);
+
+ /* clock high */
+
+ ei_outb(memr | AX_MEMR_MDC, memr_addr);
+ udelay(1);
+
+ /* clock low */
+ ei_outb(memr, memr_addr);
+ }
+
+ /* leaves the clock line low, mdir input */
+ memr |= AX_MEMR_MDIR;
+ ei_outb(memr, (void __iomem *)dev->base_addr + AX_MEMR);
+}
+
+/* ax_phy_ei_inbits
+ *
+ * read a specified number of bits from the phy
+*/
+
+static unsigned int
+ax_phy_ei_inbits(struct net_device *dev, int no)
+{
+ struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+ void __iomem *memr_addr = (void __iomem *)dev->base_addr + AX_MEMR;
+ unsigned int memr;
+ unsigned int result = 0;
+
+ /* clock low, data to input mode */
+ memr = ei_inb(memr_addr);
+ memr &= ~AX_MEMR_MDC;
+ memr |= AX_MEMR_MDIR;
+ ei_outb(memr, memr_addr);
+
+ for (no--; no >= 0; no--) {
+ ei_outb(memr | AX_MEMR_MDC, memr_addr);
+
+ udelay(1);
+
+ if (ei_inb(memr_addr) & AX_MEMR_MDI)
+ result |= (1<<no);
+
+ ei_outb(memr, memr_addr);
+ }
+
+ return result;
+}
+
+/* ax_phy_issueaddr
+ *
+ * use the low level bit shifting routines to send the address
+ * and command to the specified phy
+*/
+
+static void
+ax_phy_issueaddr(struct net_device *dev, int phy_addr, int reg, int opc)
+{
+ if (phy_debug)
+ pr_debug("%s: dev %p, %04x, %04x, %d\n",
+ __FUNCTION__, dev, phy_addr, reg, opc);
+
+ ax_mii_ei_outbits(dev, 0x3f, 6); /* pre-amble */
+ ax_mii_ei_outbits(dev, 1, 2); /* frame-start */
+ ax_mii_ei_outbits(dev, opc, 2); /* op code */
+ ax_mii_ei_outbits(dev, phy_addr, 5); /* phy address */
+ ax_mii_ei_outbits(dev, reg, 5); /* reg address */
+}
+
+static int
+ax_phy_read(struct net_device *dev, int phy_addr, int reg)
+{
+ struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+ unsigned long flags;
+ unsigned int result;
+
+ spin_lock_irqsave(&ei_local->page_lock, flags);
+
+ ax_phy_issueaddr(dev, phy_addr, reg, 2);
+
+ result = ax_phy_ei_inbits(dev, 17);
+ result &= ~(3<<16);
+
+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
+
+ if (phy_debug)
+ pr_debug("%s: %04x.%04x => read %04x\n", __FUNCTION__,
+ phy_addr, reg, result);
+
+ return result;
+}
+
+static void
+ax_phy_write(struct net_device *dev, int phy_addr, int reg, int value)
+{
+ struct ei_device *ei = (struct ei_device *) netdev_priv(dev);
+ unsigned long flags;
+
+ printk(KERN_DEBUG "%s: %p, %04x, %04x %04x\n",
+ __FUNCTION__, dev, phy_addr, reg, value);
+
+ spin_lock_irqsave(&ei->page_lock, flags);
+
+ ax_phy_issueaddr(dev, phy_addr, reg, 1);
+ ax_mii_ei_outbits(dev, 2, 2); /* send TA */
+ ax_mii_ei_outbits(dev, value, 16);
+
+ spin_unlock_irqrestore(&ei->page_lock, flags);
+}
+
+static void ax_mii_expiry(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *)data;
+ struct ax_device *ax = to_ax_dev(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&ax->mii_lock, flags);
+ mii_check_media(&ax->mii, netif_msg_link(ax), 0);
+ spin_unlock_irqrestore(&ax->mii_lock, flags);
+
+ if (ax->running) {
+ ax->mii_timer.expires = jiffies + HZ*2;
+ add_timer(&ax->mii_timer);
+ }
+}
+
+static int ax_open(struct net_device *dev)
+{
+ struct ax_device *ax = to_ax_dev(dev);
+ struct ei_device *ei_local = netdev_priv(dev);
+ int ret;
+
+ dev_dbg(ax->dev, "%s: open\n", dev->name);
+
+ ret = request_irq(dev->irq, ax_ei_interrupt, 0, dev->name, dev);
+ if (ret)
+ return ret;
+
+ ret = ax_ei_open(dev);
+ if (ret)
+ return ret;
+
+ /* turn the phy on (if turned off) */
+
+ ei_outb(ax->plat->gpoc_val, ei_local->mem + EI_SHIFT(0x17));
+ ax->running = 1;
+
+ /* start the MII timer */
+
+ init_timer(&ax->mii_timer);
+
+ ax->mii_timer.expires = jiffies+1;
+ ax->mii_timer.data = (unsigned long) dev;
+ ax->mii_timer.function = ax_mii_expiry;
+
+ add_timer(&ax->mii_timer);
+
+ return 0;
+}
+
+static int ax_close(struct net_device *dev)
+{
+ struct ax_device *ax = to_ax_dev(dev);
+ struct ei_device *ei_local = netdev_priv(dev);
+
+ dev_dbg(ax->dev, "%s: close\n", dev->name);
+
+ /* turn the phy off */
+
+ ei_outb(ax->plat->gpoc_val | (1<<6),
+ ei_local->mem + EI_SHIFT(0x17));
+
+ ax->running = 0;
+ wmb();
+
+ del_timer_sync(&ax->mii_timer);
+ ax_ei_close(dev);
+
+ free_irq(dev->irq, dev);
+ return 0;
+}
+
+static int ax_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
+{
+ struct ax_device *ax = to_ax_dev(dev);
+ unsigned long flags;
+ int rc;
+
+ if (!netif_running(dev))
+ return -EINVAL;
+
+ spin_lock_irqsave(&ax->mii_lock, flags);
+ rc = generic_mii_ioctl(&ax->mii, if_mii(req), cmd, NULL);
+ spin_unlock_irqrestore(&ax->mii_lock, flags);
+
+ return rc;
+}
+
+/* ethtool ops */
+
+static void ax_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct ax_device *ax = to_ax_dev(dev);
+
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->bus_info, ax->dev->name);
+}
+
+static int ax_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct ax_device *ax = to_ax_dev(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&ax->mii_lock, flags);
+ mii_ethtool_gset(&ax->mii, cmd);
+ spin_lock_irqsave(&ax->mii_lock, flags);
+
+ return 0;
+}
+
+static int ax_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct ax_device *ax = to_ax_dev(dev);
+ unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave(&ax->mii_lock, flags);
+ rc = mii_ethtool_sset(&ax->mii, cmd);
+ spin_lock_irqsave(&ax->mii_lock, flags);
+
+ return rc;
+}
+
+static int ax_nway_reset(struct net_device *dev)
+{
+ struct ax_device *ax = to_ax_dev(dev);
+ return mii_nway_restart(&ax->mii);
+}
+
+static u32 ax_get_link(struct net_device *dev)
+{
+ struct ax_device *ax = to_ax_dev(dev);
+ return mii_link_ok(&ax->mii);
+}
+
+static const struct ethtool_ops ax_ethtool_ops = {
+ .get_drvinfo = ax_get_drvinfo,
+ .get_settings = ax_get_settings,
+ .set_settings = ax_set_settings,
+ .nway_reset = ax_nway_reset,
+ .get_link = ax_get_link,
+ .get_perm_addr = ethtool_op_get_perm_addr,
+};
+
+/* setup code */
+
+static void ax_initial_setup(struct net_device *dev, struct ei_device *ei_local)
+{
+ void __iomem *ioaddr = ei_local->mem;
+ struct ax_device *ax = to_ax_dev(dev);
+
+ /* Select page 0*/
+ ei_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, ioaddr + E8390_CMD);
+
+ /* set to byte access */
+ ei_outb(ax->plat->dcr_val & ~1, ioaddr + EN0_DCFG);
+ ei_outb(ax->plat->gpoc_val, ioaddr + EI_SHIFT(0x17));
+}
+
+/* ax_init_dev
+ *
+ * initialise the specified device, taking care to note the MAC
+ * address it may already have (if configured), ensure
+ * the device is ready to be used by lib8390.c and registerd with
+ * the network layer.
+ */
+
+static int ax_init_dev(struct net_device *dev, int first_init)
+{
+ struct ei_device *ei_local = netdev_priv(dev);
+ struct ax_device *ax = to_ax_dev(dev);
+ void __iomem *ioaddr = ei_local->mem;
+ unsigned int start_page;
+ unsigned int stop_page;
+ int ret;
+ int i;
+
+ ret = ax_initial_check(dev);
+ if (ret)
+ goto err_out;
+
+ /* setup goes here */
+
+ ax_initial_setup(dev, ei_local);
+
+ /* read the mac from the card prom if we need it */
+
+ if (first_init && ax->plat->flags & AXFLG_HAS_EEPROM) {
+ unsigned char SA_prom[32];
+
+ for(i = 0; i < sizeof(SA_prom); i+=2) {
+ SA_prom[i] = ei_inb(ioaddr + NE_DATAPORT);
+ SA_prom[i+1] = ei_inb(ioaddr + NE_DATAPORT);
+ }
+
+ if (ax->plat->wordlength == 2)
+ for (i = 0; i < 16; i++)
+ SA_prom[i] = SA_prom[i+i];
+
+ memcpy(dev->dev_addr, SA_prom, 6);
+ }
+
+ if (ax->plat->wordlength == 2) {
+ /* We must set the 8390 for word mode. */
+ ei_outb(ax->plat->dcr_val, ei_local->mem + EN0_DCFG);
+ start_page = NESM_START_PG;
+ stop_page = NESM_STOP_PG;
+ } else {
+ start_page = NE1SM_START_PG;
+ stop_page = NE1SM_STOP_PG;
+ }
+
+ /* load the mac-address from the device if this is the
+ * first time we've initialised */
+
+ if (first_init && ax->plat->flags & AXFLG_MAC_FROMDEV) {
+ ei_outb(E8390_NODMA + E8390_PAGE1 + E8390_STOP,
+ ei_local->mem + E8390_CMD); /* 0x61 */
+
+ for (i = 0 ; i < ETHER_ADDR_LEN ; i++)
+ dev->dev_addr[i] = ei_inb(ioaddr + EN1_PHYS_SHIFT(i));
+ }
+
+ ax_reset_8390(dev);
+
+ ei_status.name = "AX88796";
+ ei_status.tx_start_page = start_page;
+ ei_status.stop_page = stop_page;
+ ei_status.word16 = (ax->plat->wordlength == 2);
+ ei_status.rx_start_page = start_page + TX_PAGES;
+
+#ifdef PACKETBUF_MEMSIZE
+ /* Allow the packet buffer size to be overridden by know-it-alls. */
+ ei_status.stop_page = ei_status.tx_start_page + PACKETBUF_MEMSIZE;
+#endif
+
+ ei_status.reset_8390 = &ax_reset_8390;
+ ei_status.block_input = &ax_block_input;
+ ei_status.block_output = &ax_block_output;
+ ei_status.get_8390_hdr = &ax_get_8390_hdr;
+ ei_status.priv = 0;
+
+ dev->open = ax_open;
+ dev->stop = ax_close;
+ dev->do_ioctl = ax_ioctl;
+ dev->ethtool_ops = &ax_ethtool_ops;
+
+ ax->msg_enable = NETIF_MSG_LINK;
+ ax->mii.phy_id_mask = 0x1f;
+ ax->mii.reg_num_mask = 0x1f;
+ ax->mii.phy_id = 0x10; /* onboard phy */
+ ax->mii.force_media = 0;
+ ax->mii.full_duplex = 0;
+ ax->mii.mdio_read = ax_phy_read;
+ ax->mii.mdio_write = ax_phy_write;
+ ax->mii.dev = dev;
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = ax_ei_poll;
+#endif
+ ax_NS8390_init(dev, 0);
+
+ if (first_init) {
+ printk("AX88796: %dbit, irq %d, %lx, MAC: ",
+ ei_status.word16 ? 16:8, dev->irq, dev->base_addr);
+
+ for (i = 0; i < ETHER_ADDR_LEN; i++)
+ printk("%2.2x%c", dev->dev_addr[i],
+ (i < (ETHER_ADDR_LEN-1) ? ':' : ' '));
+
+ printk("\n");
+ }
+
+ ret = register_netdev(dev);
+ if (ret)
+ goto out_irq;
+
+ return 0;
+
+ out_irq:
+ /* cleanup irq */
+ free_irq(dev->irq, dev);
+ err_out:
+ return ret;
+}
+
+static int ax_remove(struct platform_device *_dev)
+{
+ struct net_device *dev = platform_get_drvdata(_dev);
+ struct ax_device *ax;
+
+ ax = to_ax_dev(dev);
+
+ unregister_netdev(dev);
+ free_irq(dev->irq, dev);
+
+ iounmap(ei_status.mem);
+ release_resource(ax->mem);
+ kfree(ax->mem);
+
+ if (ax->map2) {
+ iounmap(ax->map2);
+ release_resource(ax->mem2);
+ kfree(ax->mem2);
+ }
+
+ free_netdev(dev);
+
+ return 0;
+}
+
+/* ax_probe
+ *
+ * This is the entry point when the platform device system uses to
+ * notify us of a new device to attach to. Allocate memory, find
+ * the resources and information passed, and map the necessary registers.
+*/
+
+static int ax_probe(struct platform_device *pdev)
+{
+ struct net_device *dev;
+ struct ax_device *ax;
+ struct resource *res;
+ size_t size;
+ int ret;
+
+ dev = ax__alloc_ei_netdev(sizeof(struct ax_device));
+ if (dev == NULL)
+ return -ENOMEM;
+
+ /* ok, let's setup our device */
+ ax = to_ax_dev(dev);
+
+ memset(ax, 0, sizeof(struct ax_device));
+
+ spin_lock_init(&ax->mii_lock);
+
+ ax->dev = pdev;
+ ax->plat = pdev->dev.platform_data;
+ platform_set_drvdata(pdev, dev);
+
+ ei_status.rxcr_base = ax->plat->rcr_val;
+
+ /* find the platform resources */
+
+ dev->irq = platform_get_irq(pdev, 0);
+ if (dev->irq < 0) {
+ dev_err(&pdev->dev, "no IRQ specified\n");
+ ret = -ENXIO;
+ goto exit_mem;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "no MEM specified\n");
+ ret = -ENXIO;
+ goto exit_mem;
+ }
+
+ size = (res->end - res->start) + 1;
+
+ /* setup the register offsets from either the platform data
+ * or by using the size of the resource provided */
+
+ if (ax->plat->reg_offsets)
+ ei_status.reg_offset = ax->plat->reg_offsets;
+ else {
+ ei_status.reg_offset = ax->reg_offsets;
+ for (ret = 0; ret < 0x18; ret++)
+ ax->reg_offsets[ret] = (size / 0x18) * ret;
+ }
+
+ ax->mem = request_mem_region(res->start, size, pdev->name);
+ if (ax->mem == NULL) {
+ dev_err(&pdev->dev, "cannot reserve registers\n");
+ ret = -ENXIO;
+ goto exit_mem;
+ }
+
+ ei_status.mem = ioremap(res->start, size);
+ dev->base_addr = (long)ei_status.mem;
+
+ if (ei_status.mem == NULL) {
+ dev_err(&pdev->dev, "Cannot ioremap area (%08zx,%08zx)\n",
+ res->start, res->end);
+
+ ret = -ENXIO;
+ goto exit_req;
+ }
+
+ /* look for reset area */
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (res == NULL) {
+ if (!ax->plat->reg_offsets) {
+ for (ret = 0; ret < 0x20; ret++)
+ ax->reg_offsets[ret] = (size / 0x20) * ret;
+ }
+
+ ax->map2 = NULL;
+ } else {
+ size = (res->end - res->start) + 1;
+
+ ax->mem2 = request_mem_region(res->start, size, pdev->name);
+ if (ax->mem == NULL) {
+ dev_err(&pdev->dev, "cannot reserve registers\n");
+ ret = -ENXIO;
+ goto exit_mem1;
+ }
+
+ ax->map2 = ioremap(res->start, size);
+ if (ax->map2 == NULL) {
+ dev_err(&pdev->dev, "cannot map reset register");
+ ret = -ENXIO;
+ goto exit_mem2;
+ }
+
+ ei_status.reg_offset[0x1f] = ax->map2 - ei_status.mem;
+ }
+
+ /* got resources, now initialise and register device */
+
+ ret = ax_init_dev(dev, 1);
+ if (!ret)
+ return 0;
+
+ if (ax->map2 == NULL)
+ goto exit_mem1;
+
+ iounmap(ax->map2);
+
+ exit_mem2:
+ release_resource(ax->mem2);
+ kfree(ax->mem2);
+
+ exit_mem1:
+ iounmap(ei_status.mem);
+
+ exit_req:
+ release_resource(ax->mem);
+ kfree(ax->mem);
+
+ exit_mem:
+ free_netdev(dev);
+
+ return ret;
+}
+
+/* suspend and resume */
+
+#ifdef CONFIG_PM
+static int ax_suspend(struct platform_device *dev, pm_message_t state)
+{
+ struct net_device *ndev = platform_get_drvdata(dev);
+ struct ax_device *ax = to_ax_dev(ndev);
+
+ ax->resume_open = ax->running;
+
+ netif_device_detach(ndev);
+ ax_close(ndev);
+
+ return 0;
+}
+
+static int ax_resume(struct platform_device *pdev)
+{
+ struct net_device *ndev = platform_get_drvdata(pdev);
+ struct ax_device *ax = to_ax_dev(ndev);
+
+ ax_initial_setup(ndev, netdev_priv(ndev));
+ ax_NS8390_init(ndev, ax->resume_open);
+ netif_device_attach(ndev);
+
+ if (ax->resume_open)
+ ax_open(ndev);
+
+ return 0;
+}
+
+#else
+#define ax_suspend NULL
+#define ax_resume NULL
+#endif
+
+static struct platform_driver axdrv = {
+ .driver = {
+ .name = "ax88796",
+ .owner = THIS_MODULE,
+ },
+ .probe = ax_probe,
+ .remove = ax_remove,
+ .suspend = ax_suspend,
+ .resume = ax_resume,
+};
+
+static int __init axdrv_init(void)
+{
+ return platform_driver_register(&axdrv);
+}
+
+static void __exit axdrv_exit(void)
+{
+ platform_driver_unregister(&axdrv);
+}
+
+module_init(axdrv_init);
+module_exit(axdrv_exit);
+
+MODULE_DESCRIPTION("AX88796 10/100 Ethernet platform driver");
+MODULE_AUTHOR("Ben Dooks, <ben@...tec.co.uk>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 6287ffb..cb9cb30 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -187,7 +187,7 @@ static void bond_send_gratuitous_arp(struct bonding *bond);
/*---------------------------- General routines -----------------------------*/
-const char *bond_mode_name(int mode)
+static const char *bond_mode_name(int mode)
{
switch (mode) {
case BOND_MODE_ROUNDROBIN :
@@ -1224,7 +1224,8 @@ static void bond_detach_slave(struct bonding *bond, struct slave *slave)
/*---------------------------------- IOCTL ----------------------------------*/
-int bond_sethwaddr(struct net_device *bond_dev, struct net_device *slave_dev)
+static int bond_sethwaddr(struct net_device *bond_dev,
+ struct net_device *slave_dev)
{
dprintk("bond_dev=%p\n", bond_dev);
dprintk("slave_dev=%p\n", slave_dev);
@@ -1390,6 +1391,11 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
goto err_free;
}
+ res = netdev_set_master(slave_dev, bond_dev);
+ if (res) {
+ dprintk("Error %d calling netdev_set_master\n", res);
+ goto err_close;
+ }
/* open the slave since the application closed it */
res = dev_open(slave_dev);
if (res) {
@@ -1397,12 +1403,6 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
goto err_restore_mac;
}
- res = netdev_set_master(slave_dev, bond_dev);
- if (res) {
- dprintk("Error %d calling netdev_set_master\n", res);
- goto err_close;
- }
-
new_slave->dev = slave_dev;
slave_dev->priv_flags |= IFF_BONDING;
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index a891021..6dcbd25 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -301,13 +301,11 @@ int bond_create_slave_symlinks(struct net_device *master, struct net_device *sla
void bond_destroy_slave_symlinks(struct net_device *master, struct net_device *slave);
int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev);
int bond_release(struct net_device *bond_dev, struct net_device *slave_dev);
-int bond_sethwaddr(struct net_device *bond_dev, struct net_device *slave_dev);
void bond_mii_monitor(struct net_device *bond_dev);
void bond_loadbalance_arp_mon(struct net_device *bond_dev);
void bond_activebackup_arp_mon(struct net_device *bond_dev);
void bond_set_mode_ops(struct bonding *bond, int mode);
int bond_parse_parm(char *mode_arg, struct bond_parm_tbl *tbl);
-const char *bond_mode_name(int mode);
void bond_select_active_slave(struct bonding *bond);
void bond_change_active_slave(struct bonding *bond, struct slave *new_active);
void bond_register_arp(struct bonding *);
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 15defe4..6fd1e52 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -43,6 +43,7 @@
#include <linux/proc_fs.h>
#include <linux/rtnetlink.h>
#include <linux/firmware.h>
+#include <linux/log2.h>
#include <asm/uaccess.h>
#include "common.h"
@@ -1818,8 +1819,8 @@ static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr)
return -EBUSY;
if (copy_from_user(&m, useraddr, sizeof(m)))
return -EFAULT;
- if (!m.rx_pg_sz || (m.rx_pg_sz & (m.rx_pg_sz - 1)) ||
- !m.tx_pg_sz || (m.tx_pg_sz & (m.tx_pg_sz - 1)))
+ if (!is_power_of_2(m.rx_pg_sz) ||
+ !is_power_of_2(m.tx_pg_sz))
return -EINVAL; /* not power of 2 */
if (!(m.rx_pg_sz & 0x14000))
return -EINVAL; /* not 16KB or 64KB */
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 763810c..74ea637 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -159,7 +159,7 @@
#define DRV_NAME "e100"
#define DRV_EXT "-NAPI"
-#define DRV_VERSION "3.5.17-k4"DRV_EXT
+#define DRV_VERSION "3.5.23-k4"DRV_EXT
#define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver"
#define DRV_COPYRIGHT "Copyright(c) 1999-2006 Intel Corporation"
#define PFX DRV_NAME ": "
@@ -1024,10 +1024,16 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
config->mwi_enable = 0x1; /* 1=enable, 0=disable */
config->standard_tcb = 0x0; /* 1=standard, 0=extended */
config->rx_long_ok = 0x1; /* 1=VLANs ok, 0=standard */
- if(nic->mac >= mac_82559_D101M)
+ if (nic->mac >= mac_82559_D101M) {
config->tno_intr = 0x1; /* TCO stats enable */
- else
+ /* Enable TCO in extended config */
+ if (nic->mac >= mac_82551_10) {
+ config->byte_count = 0x20; /* extended bytes */
+ config->rx_d102_mode = 0x1; /* GMRC for TCO */
+ }
+ } else {
config->standard_stat_counter = 0x0;
+ }
}
DPRINTK(HW, DEBUG, "[00-07]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index abaf3ac..f03f070 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -39,7 +39,13 @@
#include <asm/io.h>
#define DRV_NAME "ehea"
-#define DRV_VERSION "EHEA_0065"
+#define DRV_VERSION "EHEA_0067"
+
+/* EHEA capability flags */
+#define DLPAR_PORT_ADD_REM 1
+#define DLPAR_MEM_ADD 2
+#define DLPAR_MEM_REM 4
+#define EHEA_CAPABILITIES (DLPAR_PORT_ADD_REM)
#define EHEA_MSG_DEFAULT (NETIF_MSG_LINK | NETIF_MSG_TIMER \
| NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR)
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index bdb5241..383144d 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -2923,6 +2923,15 @@ static int check_module_parm(void)
return ret;
}
+static ssize_t ehea_show_capabilities(struct device_driver *drv,
+ char *buf)
+{
+ return sprintf(buf, "%d", EHEA_CAPABILITIES);
+}
+
+static DRIVER_ATTR(capabilities, S_IRUSR | S_IRGRP | S_IROTH,
+ ehea_show_capabilities, NULL);
+
int __init ehea_module_init(void)
{
int ret;
@@ -2934,8 +2943,19 @@ int __init ehea_module_init(void)
if (ret)
goto out;
ret = ibmebus_register_driver(&ehea_driver);
- if (ret)
+ if (ret) {
ehea_error("failed registering eHEA device driver on ebus");
+ goto out;
+ }
+
+ ret = driver_create_file(&ehea_driver.driver,
+ &driver_attr_capabilities);
+ if (ret) {
+ ehea_error("failed to register capabilities attribute, ret=%d",
+ ret);
+ ibmebus_unregister_driver(&ehea_driver);
+ goto out;
+ }
out:
return ret;
@@ -2943,6 +2963,7 @@ out:
static void __exit ehea_module_exit(void)
{
+ driver_remove_file(&ehea_driver.driver, &driver_attr_capabilities);
ibmebus_unregister_driver(&ehea_driver);
}
diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ioc3-eth.c
index f749e07..3ca1e8e 100644
--- a/drivers/net/ioc3-eth.c
+++ b/drivers/net/ioc3-eth.c
@@ -352,13 +352,12 @@ static u64 nic_find(struct ioc3 *ioc3, int *last)
static int nic_init(struct ioc3 *ioc3)
{
- const char *type;
+ const char *unknown = "unknown";
+ const char *type = unknown;
u8 crc;
u8 serial[6];
int save = 0, i;
- type = "unknown";
-
while (1) {
u64 reg;
reg = nic_find(ioc3, &save);
@@ -392,7 +391,7 @@ static int nic_init(struct ioc3 *ioc3)
}
printk("Found %s NIC", type);
- if (type != "unknown") {
+ if (type != unknown) {
printk (" registration number %02x:%02x:%02x:%02x:%02x:%02x,"
" CRC %02x", serial[0], serial[1], serial[2],
serial[3], serial[4], serial[5], crc);
@@ -1103,20 +1102,28 @@ static int ioc3_close(struct net_device *dev)
* MiniDINs; all other subdevices are left swinging in the wind, leave
* them disabled.
*/
-static inline int ioc3_is_menet(struct pci_dev *pdev)
+
+static int ioc3_adjacent_is_ioc3(struct pci_dev *pdev, int slot)
+{
+ struct pci_dev *dev = pci_get_slot(pdev->bus, PCI_DEVFN(slot, 0));
+ int ret = 0;
+
+ if (dev) {
+ if (dev->vendor == PCI_VENDOR_ID_SGI &&
+ dev->device == PCI_DEVICE_ID_SGI_IOC3)
+ ret = 1;
+ pci_dev_put(dev);
+ }
+
+ return ret;
+}
+
+static int ioc3_is_menet(struct pci_dev *pdev)
{
- struct pci_dev *dev;
-
- return pdev->bus->parent == NULL
- && (dev = pci_find_slot(pdev->bus->number, PCI_DEVFN(0, 0)))
- && dev->vendor == PCI_VENDOR_ID_SGI
- && dev->device == PCI_DEVICE_ID_SGI_IOC3
- && (dev = pci_find_slot(pdev->bus->number, PCI_DEVFN(1, 0)))
- && dev->vendor == PCI_VENDOR_ID_SGI
- && dev->device == PCI_DEVICE_ID_SGI_IOC3
- && (dev = pci_find_slot(pdev->bus->number, PCI_DEVFN(2, 0)))
- && dev->vendor == PCI_VENDOR_ID_SGI
- && dev->device == PCI_DEVICE_ID_SGI_IOC3;
+ return pdev->bus->parent == NULL &&
+ ioc3_adjacent_is_ioc3(pdev, 0) &&
+ ioc3_adjacent_is_ioc3(pdev, 1) &&
+ ioc3_adjacent_is_ioc3(pdev, 2);
}
#ifdef CONFIG_SERIAL_8250
diff --git a/drivers/net/macmace.c b/drivers/net/macmace.c
index fef3193..9a343b9 100644
--- a/drivers/net/macmace.c
+++ b/drivers/net/macmace.c
@@ -577,7 +577,7 @@ static irqreturn_t mace_interrupt(int irq, void *dev_id)
struct mace_data *mp = netdev_priv(dev);
volatile struct mace *mb = mp->mace;
int intr, fs;
- unsigned int flags;
+ unsigned long flags;
/* don't want the dma interrupt handler to fire */
local_irq_save(flags);
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index d0cc122..e1732c1 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -60,6 +60,7 @@
#include <linux/crc32.h>
#include <linux/moduleparam.h>
#include <linux/io.h>
+#include <linux/log2.h>
#include <net/checksum.h>
#include <asm/byteorder.h>
#include <asm/io.h>
@@ -1804,7 +1805,7 @@ static int myri10ge_open(struct net_device *dev)
*/
big_pow2 = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD;
if (big_pow2 < MYRI10GE_ALLOC_SIZE / 2) {
- while ((big_pow2 & (big_pow2 - 1)) != 0)
+ while (!is_power_of_2(big_pow2))
big_pow2++;
mgp->big_bytes = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD;
} else {
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 6195037..325269d 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -1097,109 +1097,6 @@ int netxen_nic_change_mtu(struct net_device *netdev, int new_mtu);
int netxen_nic_set_mac(struct net_device *netdev, void *p);
struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev);
-static inline void netxen_nic_disable_int(struct netxen_adapter *adapter)
-{
- uint32_t mask = 0x7ff;
- int retries = 32;
-
- DPRINTK(1, INFO, "Entered ISR Disable \n");
-
- switch (adapter->portnum) {
- case 0:
- writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_0));
- break;
- case 1:
- writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_1));
- break;
- case 2:
- writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_2));
- break;
- case 3:
- writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_3));
- break;
- }
-
- if (adapter->intr_scheme != -1 &&
- adapter->intr_scheme != INTR_SCHEME_PERPORT) {
- writel(mask,
- (void *)(PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK)));
- }
-
- /* Window = 0 or 1 */
- if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
- do {
- writel(0xffffffff, (void *)
- (PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_TARGET_STATUS)));
- mask = readl((void *)
- (pci_base_offset(adapter, ISR_INT_VECTOR)));
- if (!(mask & 0x80))
- break;
- udelay(10);
- } while (--retries);
-
- if (!retries) {
- printk(KERN_NOTICE "%s: Failed to disable interrupt completely\n",
- netxen_nic_driver_name);
- }
- }
-
- DPRINTK(1, INFO, "Done with Disable Int\n");
-
- return;
-}
-
-static inline void netxen_nic_enable_int(struct netxen_adapter *adapter)
-{
- u32 mask;
-
- DPRINTK(1, INFO, "Entered ISR Enable \n");
-
- if (adapter->intr_scheme != -1 &&
- adapter->intr_scheme != INTR_SCHEME_PERPORT) {
- switch (adapter->ahw.board_type) {
- case NETXEN_NIC_GBE:
- mask = 0x77b;
- break;
- case NETXEN_NIC_XGBE:
- mask = 0x77f;
- break;
- default:
- mask = 0x7ff;
- break;
- }
-
- writel(mask,
- (void *)(PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK)));
- }
- switch (adapter->portnum) {
- case 0:
- writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_0));
- break;
- case 1:
- writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_1));
- break;
- case 2:
- writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_2));
- break;
- case 3:
- writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_3));
- break;
- }
-
- if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
- mask = 0xbff;
- if (adapter->intr_scheme != -1 &&
- adapter->intr_scheme != INTR_SCHEME_PERPORT) {
- writel(0X0, NETXEN_CRB_NORMALIZE(adapter, CRB_INT_VECTOR));
- }
- writel(mask,
- (void *)(PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_TARGET_MASK)));
- }
-
- DPRINTK(1, INFO, "Done with enable Int\n");
-
- return;
-}
/*
* NetXen Board information
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index a66ff58..56f8197 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -156,6 +156,103 @@ static inline void netxen_nic_update_cmd_consumer(struct netxen_adapter *adapter
#define ADAPTER_LIST_SIZE 12
int netxen_cards_found;
+static void netxen_nic_disable_int(struct netxen_adapter *adapter)
+{
+ uint32_t mask = 0x7ff;
+ int retries = 32;
+
+ DPRINTK(1, INFO, "Entered ISR Disable \n");
+
+ switch (adapter->portnum) {
+ case 0:
+ writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_0));
+ break;
+ case 1:
+ writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_1));
+ break;
+ case 2:
+ writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_2));
+ break;
+ case 3:
+ writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_3));
+ break;
+ }
+
+ if (adapter->intr_scheme != -1 &&
+ adapter->intr_scheme != INTR_SCHEME_PERPORT)
+ writel(mask,PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK));
+
+ /* Window = 0 or 1 */
+ if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
+ do {
+ writel(0xffffffff,
+ PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_TARGET_STATUS));
+ mask = readl(pci_base_offset(adapter, ISR_INT_VECTOR));
+ if (!(mask & 0x80))
+ break;
+ udelay(10);
+ } while (--retries);
+
+ if (!retries) {
+ printk(KERN_NOTICE "%s: Failed to disable interrupt completely\n",
+ netxen_nic_driver_name);
+ }
+ }
+
+ DPRINTK(1, INFO, "Done with Disable Int\n");
+}
+
+static void netxen_nic_enable_int(struct netxen_adapter *adapter)
+{
+ u32 mask;
+
+ DPRINTK(1, INFO, "Entered ISR Enable \n");
+
+ if (adapter->intr_scheme != -1 &&
+ adapter->intr_scheme != INTR_SCHEME_PERPORT) {
+ switch (adapter->ahw.board_type) {
+ case NETXEN_NIC_GBE:
+ mask = 0x77b;
+ break;
+ case NETXEN_NIC_XGBE:
+ mask = 0x77f;
+ break;
+ default:
+ mask = 0x7ff;
+ break;
+ }
+
+ writel(mask, PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK));
+ }
+
+ switch (adapter->portnum) {
+ case 0:
+ writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_0));
+ break;
+ case 1:
+ writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_1));
+ break;
+ case 2:
+ writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_2));
+ break;
+ case 3:
+ writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_3));
+ break;
+ }
+
+ if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
+ mask = 0xbff;
+ if (adapter->intr_scheme != -1 &&
+ adapter->intr_scheme != INTR_SCHEME_PERPORT) {
+ writel(0X0, NETXEN_CRB_NORMALIZE(adapter, CRB_INT_VECTOR));
+ }
+ writel(mask,
+ PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_TARGET_MASK));
+ }
+
+ DPRINTK(1, INFO, "Done with enable Int\n");
+}
+
/*
* netxen_nic_probe()
*
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index f2613c2..63de89e 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1581,6 +1581,7 @@ static struct pcmcia_device_id pcnet_ids[] = {
PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1103),
PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1121),
PCMCIA_DEVICE_PROD_ID12("2408LAN", "Ethernet", 0x352fff7f, 0x00b2e941),
+ PCMCIA_DEVICE_PROD_ID1234("Socket", "CF 10/100 Ethernet Card", "Revision B", "05/11/06", 0xb38bcc2e, 0x4de88352, 0xeaca6c8d, 0x7e57c22e),
PCMCIA_DEVICE_PROD_ID123("Cardwell", "PCMCIA", "ETHERNET", 0x9533672e, 0x281f1c5d, 0x3ff7175b),
PCMCIA_DEVICE_PROD_ID123("CNet ", "CN30BC", "ETHERNET", 0x9fe55d3d, 0x85601198, 0x3ff7175b),
PCMCIA_DEVICE_PROD_ID123("Digital", "Ethernet", "Adapter", 0x9999ab35, 0x00b2e941, 0x4b0d829e),
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index fbe1104..d2ede5f 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -254,77 +254,84 @@ static int m88e1145_config_init(struct phy_device *phydev)
return 0;
}
-static struct phy_driver m88e1101_driver = {
- .phy_id = 0x01410c60,
- .phy_id_mask = 0xfffffff0,
- .name = "Marvell 88E1101",
- .features = PHY_GBIT_FEATURES,
- .flags = PHY_HAS_INTERRUPT,
- .config_aneg = &marvell_config_aneg,
- .read_status = &genphy_read_status,
- .ack_interrupt = &marvell_ack_interrupt,
- .config_intr = &marvell_config_intr,
- .driver = {.owner = THIS_MODULE,},
-};
-
-static struct phy_driver m88e1111_driver = {
- .phy_id = 0x01410cc0,
- .phy_id_mask = 0xfffffff0,
- .name = "Marvell 88E1111",
- .features = PHY_GBIT_FEATURES,
- .flags = PHY_HAS_INTERRUPT,
- .config_aneg = &marvell_config_aneg,
- .read_status = &genphy_read_status,
- .ack_interrupt = &marvell_ack_interrupt,
- .config_intr = &marvell_config_intr,
- .config_init = &m88e1111_config_init,
- .driver = {.owner = THIS_MODULE,},
-};
-
-static struct phy_driver m88e1145_driver = {
- .phy_id = 0x01410cd0,
- .phy_id_mask = 0xfffffff0,
- .name = "Marvell 88E1145",
- .features = PHY_GBIT_FEATURES,
- .flags = PHY_HAS_INTERRUPT,
- .config_init = &m88e1145_config_init,
- .config_aneg = &marvell_config_aneg,
- .read_status = &genphy_read_status,
- .ack_interrupt = &marvell_ack_interrupt,
- .config_intr = &marvell_config_intr,
- .driver = {.owner = THIS_MODULE,},
+static struct phy_driver marvell_drivers[] = {
+ {
+ .phy_id = 0x01410c60,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Marvell 88E1101",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = &marvell_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .driver = {.owner = THIS_MODULE,},
+ },
+ {
+ .phy_id = 0x01410c90,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Marvell 88E1112",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &m88e1111_config_init,
+ .config_aneg = &marvell_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .driver = {.owner = THIS_MODULE,},
+ },
+ {
+ .phy_id = 0x01410cc0,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Marvell 88E1111",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &m88e1111_config_init,
+ .config_aneg = &marvell_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .driver = {.owner = THIS_MODULE,},
+ },
+ {
+ .phy_id = 0x01410cd0,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Marvell 88E1145",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &m88e1145_config_init,
+ .config_aneg = &marvell_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .driver = {.owner = THIS_MODULE,},
+ }
};
static int __init marvell_init(void)
{
int ret;
+ int i;
- ret = phy_driver_register(&m88e1101_driver);
- if (ret)
- return ret;
+ for (i = 0; i < ARRAY_SIZE(marvell_drivers); i++) {
+ ret = phy_driver_register(&marvell_drivers[i]);
- ret = phy_driver_register(&m88e1111_driver);
- if (ret)
- goto err1111;
-
- ret = phy_driver_register(&m88e1145_driver);
- if (ret)
- goto err1145;
+ if (ret) {
+ while (i-- > 0)
+ phy_driver_unregister(&marvell_drivers[i]);
+ return ret;
+ }
+ }
return 0;
-
-err1145:
- phy_driver_unregister(&m88e1111_driver);
-err1111:
- phy_driver_unregister(&m88e1101_driver);
- return ret;
}
static void __exit marvell_exit(void)
{
- phy_driver_unregister(&m88e1101_driver);
- phy_driver_unregister(&m88e1111_driver);
- phy_driver_unregister(&m88e1145_driver);
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(marvell_drivers); i++)
+ phy_driver_unregister(&marvell_drivers[i]);
}
module_init(marvell_init);
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
new file mode 100644
index 0000000..08d2506
--- /dev/null
+++ b/drivers/net/ps3_gelic_net.c
@@ -0,0 +1,1576 @@
+/*
+ * PS3 gelic network driver.
+ *
+ * Copyright (C) 2007 Sony Computer Entertainment Inc.
+ * Copyright 2006, 2007 Sony Corporation
+ *
+ * This file is based on: spider_net.c
+ *
+ * (C) Copyright IBM Corp. 2005
+ *
+ * Authors : Utz Bacher <utz.bacher@...ibm.com>
+ * Jens Osterkamp <Jens.Osterkamp@...ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+
+#include <linux/dma-mapping.h>
+#include <net/checksum.h>
+#include <asm/firmware.h>
+#include <asm/ps3.h>
+#include <asm/lv1call.h>
+
+#include "ps3_gelic_net.h"
+
+#define DRV_NAME "Gelic Network Driver"
+#define DRV_VERSION "1.0"
+
+MODULE_AUTHOR("SCE Inc.");
+MODULE_DESCRIPTION("Gelic Network driver");
+MODULE_LICENSE("GPL");
+
+static inline struct device *ctodev(struct gelic_net_card *card)
+{
+ return &card->dev->core;
+}
+static inline unsigned int bus_id(struct gelic_net_card *card)
+{
+ return card->dev->bus_id;
+}
+static inline unsigned int dev_id(struct gelic_net_card *card)
+{
+ return card->dev->dev_id;
+}
+
+/* set irq_mask */
+static int gelic_net_set_irq_mask(struct gelic_net_card *card, u64 mask)
+{
+ int status;
+
+ status = lv1_net_set_interrupt_mask(bus_id(card), dev_id(card),
+ mask, 0);
+ if (status)
+ dev_info(ctodev(card),
+ "lv1_net_set_interrupt_mask failed %d\n", status);
+ return status;
+}
+static inline void gelic_net_rx_irq_on(struct gelic_net_card *card)
+{
+ gelic_net_set_irq_mask(card, card->ghiintmask | GELIC_NET_RXINT);
+}
+static inline void gelic_net_rx_irq_off(struct gelic_net_card *card)
+{
+ gelic_net_set_irq_mask(card, card->ghiintmask & ~GELIC_NET_RXINT);
+}
+/**
+ * gelic_net_get_descr_status -- returns the status of a descriptor
+ * @descr: descriptor to look at
+ *
+ * returns the status as in the dmac_cmd_status field of the descriptor
+ */
+static enum gelic_net_descr_status
+gelic_net_get_descr_status(struct gelic_net_descr *descr)
+{
+ u32 cmd_status;
+
+ cmd_status = descr->dmac_cmd_status;
+ cmd_status >>= GELIC_NET_DESCR_IND_PROC_SHIFT;
+ return cmd_status;
+}
+
+/**
+ * gelic_net_set_descr_status -- sets the status of a descriptor
+ * @descr: descriptor to change
+ * @status: status to set in the descriptor
+ *
+ * changes the status to the specified value. Doesn't change other bits
+ * in the status
+ */
+static void gelic_net_set_descr_status(struct gelic_net_descr *descr,
+ enum gelic_net_descr_status status)
+{
+ u32 cmd_status;
+
+ /* read the status */
+ cmd_status = descr->dmac_cmd_status;
+ /* clean the upper 4 bits */
+ cmd_status &= GELIC_NET_DESCR_IND_PROC_MASKO;
+ /* add the status to it */
+ cmd_status |= ((u32)status) << GELIC_NET_DESCR_IND_PROC_SHIFT;
+ /* and write it back */
+ descr->dmac_cmd_status = cmd_status;
+ /*
+ * dma_cmd_status field is used to indicate whether the descriptor
+ * is valid or not.
+ * Usually caller of this function wants to inform that to the
+ * hardware, so we assure here the hardware sees the change.
+ */
+ wmb();
+}
+
+/**
+ * gelic_net_free_chain - free descriptor chain
+ * @card: card structure
+ * @descr_in: address of desc
+ */
+static void gelic_net_free_chain(struct gelic_net_card *card,
+ struct gelic_net_descr *descr_in)
+{
+ struct gelic_net_descr *descr;
+
+ for (descr = descr_in; descr && descr->bus_addr; descr = descr->next) {
+ dma_unmap_single(ctodev(card), descr->bus_addr,
+ GELIC_NET_DESCR_SIZE, DMA_BIDIRECTIONAL);
+ descr->bus_addr = 0;
+ }
+}
+
+/**
+ * gelic_net_init_chain - links descriptor chain
+ * @card: card structure
+ * @chain: address of chain
+ * @start_descr: address of descriptor array
+ * @no: number of descriptors
+ *
+ * we manage a circular list that mirrors the hardware structure,
+ * except that the hardware uses bus addresses.
+ *
+ * returns 0 on success, <0 on failure
+ */
+static int gelic_net_init_chain(struct gelic_net_card *card,
+ struct gelic_net_descr_chain *chain,
+ struct gelic_net_descr *start_descr, int no)
+{
+ int i;
+ struct gelic_net_descr *descr;
+
+ descr = start_descr;
+ memset(descr, 0, sizeof(*descr) * no);
+
+ /* set up the hardware pointers in each descriptor */
+ for (i = 0; i < no; i++, descr++) {
+ gelic_net_set_descr_status(descr, GELIC_NET_DESCR_NOT_IN_USE);
+ descr->bus_addr =
+ dma_map_single(ctodev(card), descr,
+ GELIC_NET_DESCR_SIZE,
+ DMA_BIDIRECTIONAL);
+
+ if (!descr->bus_addr)
+ goto iommu_error;
+
+ descr->next = descr + 1;
+ descr->prev = descr - 1;
+ }
+ /* make them as ring */
+ (descr - 1)->next = start_descr;
+ start_descr->prev = (descr - 1);
+
+ /* chain bus addr of hw descriptor */
+ descr = start_descr;
+ for (i = 0; i < no; i++, descr++) {
+ descr->next_descr_addr = descr->next->bus_addr;
+ }
+
+ chain->head = start_descr;
+ chain->tail = start_descr;
+
+ /* do not chain last hw descriptor */
+ (descr - 1)->next_descr_addr = 0;
+
+ return 0;
+
+iommu_error:
+ for (i--, descr--; 0 <= i; i--, descr--)
+ if (descr->bus_addr)
+ dma_unmap_single(ctodev(card), descr->bus_addr,
+ GELIC_NET_DESCR_SIZE,
+ DMA_BIDIRECTIONAL);
+ return -ENOMEM;
+}
+
+/**
+ * gelic_net_prepare_rx_descr - reinitializes a rx descriptor
+ * @card: card structure
+ * @descr: descriptor to re-init
+ *
+ * return 0 on succes, <0 on failure
+ *
+ * allocates a new rx skb, iommu-maps it and attaches it to the descriptor.
+ * Activate the descriptor state-wise
+ */
+static int gelic_net_prepare_rx_descr(struct gelic_net_card *card,
+ struct gelic_net_descr *descr)
+{
+ int offset;
+ unsigned int bufsize;
+
+ if (gelic_net_get_descr_status(descr) != GELIC_NET_DESCR_NOT_IN_USE) {
+ dev_info(ctodev(card), "%s: ERROR status \n", __func__);
+ }
+ /* we need to round up the buffer size to a multiple of 128 */
+ bufsize = ALIGN(GELIC_NET_MAX_MTU, GELIC_NET_RXBUF_ALIGN);
+
+ /* and we need to have it 128 byte aligned, therefore we allocate a
+ * bit more */
+ descr->skb = netdev_alloc_skb(card->netdev,
+ bufsize + GELIC_NET_RXBUF_ALIGN - 1);
+ if (!descr->skb) {
+ descr->buf_addr = 0; /* tell DMAC don't touch memory */
+ dev_info(ctodev(card),
+ "%s:allocate skb failed !!\n", __func__);
+ return -ENOMEM;
+ }
+ descr->buf_size = bufsize;
+ descr->dmac_cmd_status = 0;
+ descr->result_size = 0;
+ descr->valid_size = 0;
+ descr->data_error = 0;
+
+ offset = ((unsigned long)descr->skb->data) &
+ (GELIC_NET_RXBUF_ALIGN - 1);
+ if (offset)
+ skb_reserve(descr->skb, GELIC_NET_RXBUF_ALIGN - offset);
+ /* io-mmu-map the skb */
+ descr->buf_addr = dma_map_single(ctodev(card), descr->skb->data,
+ GELIC_NET_MAX_MTU,
+ DMA_FROM_DEVICE);
+ if (!descr->buf_addr) {
+ dev_kfree_skb_any(descr->skb);
+ descr->skb = NULL;
+ dev_info(ctodev(card),
+ "%s:Could not iommu-map rx buffer\n", __func__);
+ gelic_net_set_descr_status(descr, GELIC_NET_DESCR_NOT_IN_USE);
+ return -ENOMEM;
+ } else {
+ gelic_net_set_descr_status(descr, GELIC_NET_DESCR_CARDOWNED);
+ return 0;
+ }
+}
+
+/**
+ * gelic_net_release_rx_chain - free all skb of rx descr
+ * @card: card structure
+ *
+ */
+static void gelic_net_release_rx_chain(struct gelic_net_card *card)
+{
+ struct gelic_net_descr *descr = card->rx_chain.head;
+
+ do {
+ if (descr->skb) {
+ dma_unmap_single(ctodev(card),
+ descr->buf_addr,
+ descr->skb->len,
+ DMA_FROM_DEVICE);
+ descr->buf_addr = 0;
+ dev_kfree_skb_any(descr->skb);
+ descr->skb = NULL;
+ descr->dmac_cmd_status = GELIC_NET_DESCR_NOT_IN_USE;
+ }
+ descr = descr->next;
+ } while (descr != card->rx_chain.head);
+}
+
+/**
+ * gelic_net_fill_rx_chain - fills descriptors/skbs in the rx chains
+ * @card: card structure
+ *
+ * fills all descriptors in the rx chain: allocates skbs
+ * and iommu-maps them.
+ * returns 0 on success, <0 on failure
+ */
+static int gelic_net_fill_rx_chain(struct gelic_net_card *card)
+{
+ struct gelic_net_descr *descr = card->rx_chain.head;
+ int ret;
+
+ do {
+ if (!descr->skb) {
+ ret = gelic_net_prepare_rx_descr(card, descr);
+ if (ret)
+ goto rewind;
+ }
+ descr = descr->next;
+ } while (descr != card->rx_chain.head);
+
+ return 0;
+rewind:
+ gelic_net_release_rx_chain(card);
+ return ret;
+}
+
+/**
+ * gelic_net_alloc_rx_skbs - allocates rx skbs in rx descriptor chains
+ * @card: card structure
+ *
+ * returns 0 on success, <0 on failure
+ */
+static int gelic_net_alloc_rx_skbs(struct gelic_net_card *card)
+{
+ struct gelic_net_descr_chain *chain;
+ int ret;
+ chain = &card->rx_chain;
+ ret = gelic_net_fill_rx_chain(card);
+ chain->head = card->rx_top->prev; /* point to the last */
+ return ret;
+}
+
+/**
+ * gelic_net_release_tx_descr - processes a used tx descriptor
+ * @card: card structure
+ * @descr: descriptor to release
+ *
+ * releases a used tx descriptor (unmapping, freeing of skb)
+ */
+static void gelic_net_release_tx_descr(struct gelic_net_card *card,
+ struct gelic_net_descr *descr)
+{
+ struct sk_buff *skb;
+
+
+ if (descr->data_status & (1 << GELIC_NET_TXDESC_TAIL)) {
+ /* 2nd descriptor */
+ skb = descr->skb;
+ dma_unmap_single(ctodev(card), descr->buf_addr, skb->len,
+ DMA_TO_DEVICE);
+ dev_kfree_skb_any(skb);
+ } else {
+ dma_unmap_single(ctodev(card), descr->buf_addr,
+ descr->buf_size, DMA_TO_DEVICE);
+ }
+
+ descr->buf_addr = 0;
+ descr->buf_size = 0;
+ descr->next_descr_addr = 0;
+ descr->result_size = 0;
+ descr->valid_size = 0;
+ descr->data_status = 0;
+ descr->data_error = 0;
+ descr->skb = NULL;
+
+ /* set descr status */
+ descr->dmac_cmd_status = GELIC_NET_DMAC_CMDSTAT_NOT_IN_USE;
+}
+
+/**
+ * gelic_net_release_tx_chain - processes sent tx descriptors
+ * @card: adapter structure
+ * @stop: net_stop sequence
+ *
+ * releases the tx descriptors that gelic has finished with
+ */
+static void gelic_net_release_tx_chain(struct gelic_net_card *card, int stop)
+{
+ struct gelic_net_descr_chain *tx_chain;
+ enum gelic_net_descr_status status;
+ int release = 0;
+
+ for (tx_chain = &card->tx_chain;
+ tx_chain->head != tx_chain->tail && tx_chain->tail;
+ tx_chain->tail = tx_chain->tail->next) {
+ status = gelic_net_get_descr_status(tx_chain->tail);
+ switch (status) {
+ case GELIC_NET_DESCR_RESPONSE_ERROR:
+ case GELIC_NET_DESCR_PROTECTION_ERROR:
+ case GELIC_NET_DESCR_FORCE_END:
+ if (printk_ratelimit())
+ dev_info(ctodev(card),
+ "%s: forcing end of tx descriptor " \
+ "with status %x\n",
+ __func__, status);
+ card->netdev_stats.tx_dropped++;
+ break;
+
+ case GELIC_NET_DESCR_COMPLETE:
+ card->netdev_stats.tx_packets++;
+ card->netdev_stats.tx_bytes +=
+ tx_chain->tail->skb->len;
+ break;
+
+ case GELIC_NET_DESCR_CARDOWNED:
+ /* pending tx request */
+ default:
+ /* any other value (== GELIC_NET_DESCR_NOT_IN_USE) */
+ goto out;
+ }
+ gelic_net_release_tx_descr(card, tx_chain->tail);
+ release = 1;
+ }
+out:
+ if (!stop && release)
+ netif_wake_queue(card->netdev);
+}
+
+/**
+ * gelic_net_set_multi - sets multicast addresses and promisc flags
+ * @netdev: interface device structure
+ *
+ * gelic_net_set_multi configures multicast addresses as needed for the
+ * netdev interface. It also sets up multicast, allmulti and promisc
+ * flags appropriately
+ */
+static void gelic_net_set_multi(struct net_device *netdev)
+{
+ struct gelic_net_card *card = netdev_priv(netdev);
+ struct dev_mc_list *mc;
+ unsigned int i;
+ uint8_t *p;
+ u64 addr;
+ int status;
+
+ /* clear all multicast address */
+ status = lv1_net_remove_multicast_address(bus_id(card), dev_id(card),
+ 0, 1);
+ if (status)
+ dev_err(ctodev(card),
+ "lv1_net_remove_multicast_address failed %d\n",
+ status);
+ /* set broadcast address */
+ status = lv1_net_add_multicast_address(bus_id(card), dev_id(card),
+ GELIC_NET_BROADCAST_ADDR, 0);
+ if (status)
+ dev_err(ctodev(card),
+ "lv1_net_add_multicast_address failed, %d\n",
+ status);
+
+ if (netdev->flags & IFF_ALLMULTI
+ || netdev->mc_count > GELIC_NET_MC_COUNT_MAX) { /* list max */
+ status = lv1_net_add_multicast_address(bus_id(card),
+ dev_id(card),
+ 0, 1);
+ if (status)
+ dev_err(ctodev(card),
+ "lv1_net_add_multicast_address failed, %d\n",
+ status);
+ return;
+ }
+
+ /* set multicast address */
+ for (mc = netdev->mc_list; mc; mc = mc->next) {
+ addr = 0;
+ p = mc->dmi_addr;
+ for (i = 0; i < ETH_ALEN; i++) {
+ addr <<= 8;
+ addr |= *p++;
+ }
+ status = lv1_net_add_multicast_address(bus_id(card),
+ dev_id(card),
+ addr, 0);
+ if (status)
+ dev_err(ctodev(card),
+ "lv1_net_add_multicast_address failed, %d\n",
+ status);
+ }
+}
+
+/**
+ * gelic_net_enable_rxdmac - enables the receive DMA controller
+ * @card: card structure
+ *
+ * gelic_net_enable_rxdmac enables the DMA controller by setting RX_DMA_EN
+ * in the GDADMACCNTR register
+ */
+static inline void gelic_net_enable_rxdmac(struct gelic_net_card *card)
+{
+ int status;
+
+ status = lv1_net_start_rx_dma(bus_id(card), dev_id(card),
+ card->rx_chain.tail->bus_addr, 0);
+ if (status)
+ dev_info(ctodev(card),
+ "lv1_net_start_rx_dma failed, status=%d\n", status);
+}
+
+/**
+ * gelic_net_disable_rxdmac - disables the receive DMA controller
+ * @card: card structure
+ *
+ * gelic_net_disable_rxdmac terminates processing on the DMA controller by
+ * turing off DMA and issueing a force end
+ */
+static inline void gelic_net_disable_rxdmac(struct gelic_net_card *card)
+{
+ int status;
+
+ /* this hvc blocks until the DMA in progress really stopped */
+ status = lv1_net_stop_rx_dma(bus_id(card), dev_id(card), 0);
+ if (status)
+ dev_err(ctodev(card),
+ "lv1_net_stop_rx_dma faild, %d\n", status);
+}
+
+/**
+ * gelic_net_disable_txdmac - disables the transmit DMA controller
+ * @card: card structure
+ *
+ * gelic_net_disable_txdmac terminates processing on the DMA controller by
+ * turing off DMA and issueing a force end
+ */
+static inline void gelic_net_disable_txdmac(struct gelic_net_card *card)
+{
+ int status;
+
+ /* this hvc blocks until the DMA in progress really stopped */
+ status = lv1_net_stop_tx_dma(bus_id(card), dev_id(card), 0);
+ if (status)
+ dev_err(ctodev(card),
+ "lv1_net_stop_tx_dma faild, status=%d\n", status);
+}
+
+/**
+ * gelic_net_stop - called upon ifconfig down
+ * @netdev: interface device structure
+ *
+ * always returns 0
+ */
+static int gelic_net_stop(struct net_device *netdev)
+{
+ struct gelic_net_card *card = netdev_priv(netdev);
+
+ netif_poll_disable(netdev);
+ netif_stop_queue(netdev);
+
+ /* turn off DMA, force end */
+ gelic_net_disable_rxdmac(card);
+ gelic_net_disable_txdmac(card);
+
+ gelic_net_set_irq_mask(card, 0);
+
+ /* disconnect event port */
+ free_irq(card->netdev->irq, card->netdev);
+ ps3_sb_event_receive_port_destroy(card->dev, card->netdev->irq);
+ card->netdev->irq = NO_IRQ;
+
+ netif_carrier_off(netdev);
+
+ /* release chains */
+ gelic_net_release_tx_chain(card, 1);
+ gelic_net_release_rx_chain(card);
+
+ gelic_net_free_chain(card, card->tx_top);
+ gelic_net_free_chain(card, card->rx_top);
+
+ return 0;
+}
+
+/**
+ * gelic_net_get_next_tx_descr - returns the next available tx descriptor
+ * @card: device structure to get descriptor from
+ *
+ * returns the address of the next descriptor, or NULL if not available.
+ */
+static struct gelic_net_descr *
+gelic_net_get_next_tx_descr(struct gelic_net_card *card)
+{
+ if (!card->tx_chain.head)
+ return NULL;
+ /* see if we can two consecutive free descrs */
+ if (card->tx_chain.tail != card->tx_chain.head->next &&
+ gelic_net_get_descr_status(card->tx_chain.head) ==
+ GELIC_NET_DESCR_NOT_IN_USE &&
+ card->tx_chain.tail != card->tx_chain.head->next->next &&
+ gelic_net_get_descr_status(card->tx_chain.head->next) ==
+ GELIC_NET_DESCR_NOT_IN_USE )
+ return card->tx_chain.head;
+ else
+ return NULL;
+
+}
+
+/**
+ * gelic_net_set_txdescr_cmdstat - sets the tx descriptor command field
+ * @descr: descriptor structure to fill out
+ * @skb: packet to consider
+ * @middle: middle of frame
+ *
+ * fills out the command and status field of the descriptor structure,
+ * depending on hardware checksum settings. This function assumes a wmb()
+ * has executed before.
+ */
+static void gelic_net_set_txdescr_cmdstat(struct gelic_net_descr *descr,
+ struct sk_buff *skb, int middle)
+{
+ u32 eofr;
+
+ if (middle)
+ eofr = 0;
+ else
+ eofr = GELIC_NET_DMAC_CMDSTAT_END_FRAME;
+
+ if (skb->ip_summed != CHECKSUM_PARTIAL)
+ descr->dmac_cmd_status = GELIC_NET_DMAC_CMDSTAT_NOCS | eofr;
+ else {
+ /* is packet ip?
+ * if yes: tcp? udp? */
+ if (skb->protocol == htons(ETH_P_IP)) {
+ if (ip_hdr(skb)->protocol == IPPROTO_TCP)
+ descr->dmac_cmd_status =
+ GELIC_NET_DMAC_CMDSTAT_TCPCS | eofr;
+ else if (ip_hdr(skb)->protocol == IPPROTO_UDP)
+ descr->dmac_cmd_status =
+ GELIC_NET_DMAC_CMDSTAT_UDPCS | eofr;
+ else /*
+ * the stack should checksum non-tcp and non-udp
+ * packets on his own: NETIF_F_IP_CSUM
+ */
+ descr->dmac_cmd_status =
+ GELIC_NET_DMAC_CMDSTAT_NOCS | eofr;
+ }
+ }
+}
+
+/**
+ * gelic_net_prepare_tx_descr_v - get dma address of skb_data
+ * @card: card structure
+ * @descr: descriptor structure
+ * @skb: packet to use
+ *
+ * returns 0 on success, <0 on failure.
+ *
+ */
+static int gelic_net_prepare_tx_descr_v(struct gelic_net_card *card,
+ struct gelic_net_descr *descr,
+ struct sk_buff *skb)
+{
+ dma_addr_t buf[2];
+ unsigned int vlan_len;
+
+ if (skb->len < GELIC_NET_VLAN_POS)
+ return -EINVAL;
+
+ memcpy(&descr->vlan, skb->data, GELIC_NET_VLAN_POS);
+ if (card->vlan_index != -1) {
+ descr->vlan.h_vlan_proto = htons(ETH_P_8021Q); /* vlan 0x8100*/
+ descr->vlan.h_vlan_TCI = htons(card->vlan_id[card->vlan_index]);
+ vlan_len = GELIC_NET_VLAN_POS + VLAN_HLEN; /* VLAN_HLEN=4 */
+ } else
+ vlan_len = GELIC_NET_VLAN_POS; /* no vlan tag */
+
+ /* first descr */
+ buf[0] = dma_map_single(ctodev(card), &descr->vlan,
+ vlan_len, DMA_TO_DEVICE);
+
+ if (!buf[0]) {
+ dev_err(ctodev(card),
+ "dma map 1 failed (%p, %i). Dropping packet\n",
+ skb->data, vlan_len);
+ return -ENOMEM;
+ }
+
+ descr->buf_addr = buf[0];
+ descr->buf_size = vlan_len;
+ descr->skb = skb; /* not used */
+ descr->data_status = 0;
+ gelic_net_set_txdescr_cmdstat(descr, skb, 1); /* not the frame end */
+
+ /* second descr */
+ card->tx_chain.head = card->tx_chain.head->next;
+ descr->next_descr_addr = descr->next->bus_addr;
+ descr = descr->next;
+ if (gelic_net_get_descr_status(descr) != GELIC_NET_DESCR_NOT_IN_USE)
+ /* XXX will be removed */
+ dev_err(ctodev(card), "descr is not free!\n");
+
+ buf[1] = dma_map_single(ctodev(card), skb->data + GELIC_NET_VLAN_POS,
+ skb->len - GELIC_NET_VLAN_POS,
+ DMA_TO_DEVICE);
+
+ if (!buf[1]) {
+ dev_err(ctodev(card),
+ "dma map 2 failed (%p, %i). Dropping packet\n",
+ skb->data + GELIC_NET_VLAN_POS,
+ skb->len - GELIC_NET_VLAN_POS);
+ dma_unmap_single(ctodev(card), buf[0], vlan_len,
+ DMA_TO_DEVICE);
+ return -ENOMEM;
+ }
+
+ descr->buf_addr = buf[1];
+ descr->buf_size = skb->len - GELIC_NET_VLAN_POS;
+ descr->skb = skb;
+ descr->data_status = 0;
+ descr->next_descr_addr = 0; /* terminate hw descr */
+ gelic_net_set_txdescr_cmdstat(descr, skb, 0);
+
+ return 0;
+}
+
+/**
+ * gelic_net_kick_txdma - enables TX DMA processing
+ * @card: card structure
+ * @descr: descriptor address to enable TX processing at
+ *
+ */
+static int gelic_net_kick_txdma(struct gelic_net_card *card,
+ struct gelic_net_descr *descr)
+{
+ int status = -ENXIO;
+ int count = 10;
+
+ if (card->tx_dma_progress)
+ return 0;
+
+ if (gelic_net_get_descr_status(descr) == GELIC_NET_DESCR_CARDOWNED) {
+ card->tx_dma_progress = 1;
+ /* sometimes we need retry here */
+ while (count--) {
+ status = lv1_net_start_tx_dma(bus_id(card),
+ dev_id(card),
+ descr->bus_addr, 0);
+ if (!status)
+ break;
+ }
+ if (!count)
+ dev_info(ctodev(card), "lv1_net_start_txdma failed," \
+ "status=%d %#lx\n",
+ status, card->irq_status);
+ }
+ return status;
+}
+
+/**
+ * gelic_net_xmit - transmits a frame over the device
+ * @skb: packet to send out
+ * @netdev: interface device structure
+ *
+ * returns 0 on success, <0 on failure
+ */
+static int gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct gelic_net_card *card = netdev_priv(netdev);
+ struct gelic_net_descr *descr = NULL;
+ int result;
+ unsigned long flags;
+
+ spin_lock_irqsave(&card->tx_dma_lock, flags);
+
+ gelic_net_release_tx_chain(card, 0);
+ if (!skb)
+ goto kick;
+ descr = gelic_net_get_next_tx_descr(card);
+ if (!descr) {
+ netif_stop_queue(netdev);
+ spin_unlock_irqrestore(&card->tx_dma_lock, flags);
+ return NETDEV_TX_BUSY;
+ }
+ result = gelic_net_prepare_tx_descr_v(card, descr, skb);
+
+ if (result)
+ goto error;
+
+ card->tx_chain.head = card->tx_chain.head->next;
+
+ if (descr->prev)
+ descr->prev->next_descr_addr = descr->bus_addr;
+kick:
+ /*
+ * as hardware descriptor is modified in the above lines,
+ * ensure that the hardware sees it
+ */
+ wmb();
+ if (gelic_net_kick_txdma(card, card->tx_chain.tail))
+ goto error;
+
+ netdev->trans_start = jiffies;
+ spin_unlock_irqrestore(&card->tx_dma_lock, flags);
+ return NETDEV_TX_OK;
+
+error:
+ card->netdev_stats.tx_dropped++;
+ spin_unlock_irqrestore(&card->tx_dma_lock, flags);
+ return NETDEV_TX_LOCKED;
+}
+
+/**
+ * gelic_net_pass_skb_up - takes an skb from a descriptor and passes it on
+ * @descr: descriptor to process
+ * @card: card structure
+ *
+ * iommu-unmaps the skb, fills out skb structure and passes the data to the
+ * stack. The descriptor state is not changed.
+ */
+static void gelic_net_pass_skb_up(struct gelic_net_descr *descr,
+ struct gelic_net_card *card)
+{
+ struct sk_buff *skb;
+ struct net_device *netdev;
+ u32 data_status, data_error;
+
+ data_status = descr->data_status;
+ data_error = descr->data_error;
+ netdev = card->netdev;
+ /* unmap skb buffer */
+ skb = descr->skb;
+ dma_unmap_single(ctodev(card), descr->buf_addr, GELIC_NET_MAX_MTU,
+ DMA_FROM_DEVICE);
+
+ skb_put(skb, descr->valid_size? descr->valid_size : descr->result_size);
+ if (!descr->valid_size)
+ dev_info(ctodev(card), "buffer full %x %x %x\n",
+ descr->result_size, descr->buf_size,
+ descr->dmac_cmd_status);
+
+ descr->skb = NULL;
+ /*
+ * the card put 2 bytes vlan tag in front
+ * of the ethernet frame
+ */
+ skb_pull(skb, 2);
+ skb->protocol = eth_type_trans(skb, netdev);
+
+ /* checksum offload */
+ if (card->rx_csum) {
+ if ((data_status & GELIC_NET_DATA_STATUS_CHK_MASK) &&
+ (!(data_error & GELIC_NET_DATA_ERROR_CHK_MASK)))
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ else
+ skb->ip_summed = CHECKSUM_NONE;
+ } else
+ skb->ip_summed = CHECKSUM_NONE;
+
+ /* update netdevice statistics */
+ card->netdev_stats.rx_packets++;
+ card->netdev_stats.rx_bytes += skb->len;
+
+ /* pass skb up to stack */
+ netif_receive_skb(skb);
+}
+
+/**
+ * gelic_net_decode_one_descr - processes an rx descriptor
+ * @card: card structure
+ *
+ * returns 1 if a packet has been sent to the stack, otherwise 0
+ *
+ * processes an rx descriptor by iommu-unmapping the data buffer and passing
+ * the packet up to the stack
+ */
+static int gelic_net_decode_one_descr(struct gelic_net_card *card)
+{
+ enum gelic_net_descr_status status;
+ struct gelic_net_descr_chain *chain = &card->rx_chain;
+ struct gelic_net_descr *descr = chain->tail;
+ int dmac_chain_ended;
+
+ status = gelic_net_get_descr_status(descr);
+ /* is this descriptor terminated with next_descr == NULL? */
+ dmac_chain_ended =
+ descr->dmac_cmd_status & GELIC_NET_DMAC_CMDSTAT_RXDCEIS;
+
+ if (status == GELIC_NET_DESCR_CARDOWNED)
+ return 0;
+
+ if (status == GELIC_NET_DESCR_NOT_IN_USE) {
+ dev_dbg(ctodev(card), "dormant descr? %p\n", descr);
+ return 0;
+ }
+
+ if ((status == GELIC_NET_DESCR_RESPONSE_ERROR) ||
+ (status == GELIC_NET_DESCR_PROTECTION_ERROR) ||
+ (status == GELIC_NET_DESCR_FORCE_END)) {
+ dev_info(ctodev(card), "dropping RX descriptor with state %x\n",
+ status);
+ card->netdev_stats.rx_dropped++;
+ goto refill;
+ }
+
+ if ((status != GELIC_NET_DESCR_COMPLETE) &&
+ (status != GELIC_NET_DESCR_FRAME_END)) {
+ dev_dbg(ctodev(card), "RX descriptor with state %x\n",
+ status);
+ goto refill;
+ }
+
+ /* ok, we've got a packet in descr */
+ gelic_net_pass_skb_up(descr, card); /* 1: skb_up sccess */
+
+refill:
+ descr->next_descr_addr = 0; /* unlink the descr */
+
+ /* change the descriptor state: */
+ gelic_net_set_descr_status(descr, GELIC_NET_DESCR_NOT_IN_USE);
+
+ /* refill one desc
+ * FIXME: this can fail, but for now, just leave this
+ * descriptor without skb
+ */
+ gelic_net_prepare_rx_descr(card, descr);
+ chain->head = descr;
+ chain->tail = descr->next;
+ descr->prev->next_descr_addr = descr->bus_addr;
+
+ if (dmac_chain_ended) {
+ gelic_net_enable_rxdmac(card);
+ dev_dbg(ctodev(card), "reenable rx dma\n");
+ }
+
+ return 1;
+}
+
+/**
+ * gelic_net_poll - NAPI poll function called by the stack to return packets
+ * @netdev: interface device structure
+ * @budget: number of packets we can pass to the stack at most
+ *
+ * returns 0 if no more packets available to the driver/stack. Returns 1,
+ * if the quota is exceeded, but the driver has still packets.
+ *
+ */
+static int gelic_net_poll(struct net_device *netdev, int *budget)
+{
+ struct gelic_net_card *card = netdev_priv(netdev);
+ int packets_to_do, packets_done = 0;
+ int no_more_packets = 0;
+
+ packets_to_do = min(*budget, netdev->quota);
+
+ while (packets_to_do) {
+ if (gelic_net_decode_one_descr(card)) {
+ packets_done++;
+ packets_to_do--;
+ } else {
+ /* no more packets for the stack */
+ no_more_packets = 1;
+ break;
+ }
+ }
+ netdev->quota -= packets_done;
+ *budget -= packets_done;
+ if (no_more_packets) {
+ netif_rx_complete(netdev);
+ gelic_net_rx_irq_on(card);
+ return 0;
+ } else
+ return 1;
+}
+
+/**
+ * gelic_net_get_stats - get interface statistics
+ * @netdev: interface device structure
+ *
+ * returns the interface statistics residing in the gelic_net_card struct
+ */
+static struct net_device_stats *gelic_net_get_stats(struct net_device *netdev)
+{
+ struct gelic_net_card *card = netdev_priv(netdev);
+
+ return &card->netdev_stats;
+}
+
+/**
+ * gelic_net_change_mtu - changes the MTU of an interface
+ * @netdev: interface device structure
+ * @new_mtu: new MTU value
+ *
+ * returns 0 on success, <0 on failure
+ */
+static int gelic_net_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ /* no need to re-alloc skbs or so -- the max mtu is about 2.3k
+ * and mtu is outbound only anyway */
+ if ((new_mtu < GELIC_NET_MIN_MTU) ||
+ (new_mtu > GELIC_NET_MAX_MTU)) {
+ return -EINVAL;
+ }
+ netdev->mtu = new_mtu;
+ return 0;
+}
+
+/**
+ * gelic_net_interrupt - event handler for gelic_net
+ */
+static irqreturn_t gelic_net_interrupt(int irq, void *ptr)
+{
+ unsigned long flags;
+ struct net_device *netdev = ptr;
+ struct gelic_net_card *card = netdev_priv(netdev);
+ u64 status;
+
+ status = card->irq_status;
+
+ if (!status)
+ return IRQ_NONE;
+
+ if (status & GELIC_NET_RXINT) {
+ gelic_net_rx_irq_off(card);
+ netif_rx_schedule(netdev);
+ }
+
+ if (status & GELIC_NET_TXINT) {
+ spin_lock_irqsave(&card->tx_dma_lock, flags);
+ card->tx_dma_progress = 0;
+ spin_unlock_irqrestore(&card->tx_dma_lock, flags);
+ /* start pending DMA */
+ gelic_net_xmit(NULL, netdev);
+ }
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/**
+ * gelic_net_poll_controller - artificial interrupt for netconsole etc.
+ * @netdev: interface device structure
+ *
+ * see Documentation/networking/netconsole.txt
+ */
+static void gelic_net_poll_controller(struct net_device *netdev)
+{
+ struct gelic_net_card *card = netdev_priv(netdev);
+
+ gelic_net_set_irq_mask(card, 0);
+ gelic_net_interrupt(netdev->irq, netdev);
+ gelic_net_set_irq_mask(card, card->ghiintmask);
+}
+#endif /* CONFIG_NET_POLL_CONTROLLER */
+
+/**
+ * gelic_net_open_device - open device and map dma region
+ * @card: card structure
+ */
+static int gelic_net_open_device(struct gelic_net_card *card)
+{
+ int result;
+
+ result = ps3_sb_event_receive_port_setup(card->dev, PS3_BINDING_CPU_ANY,
+ &card->netdev->irq);
+
+ if (result) {
+ dev_info(ctodev(card),
+ "%s:%d: gelic_net_open_device failed (%d)\n",
+ __func__, __LINE__, result);
+ result = -EPERM;
+ goto fail_alloc_irq;
+ }
+
+ result = request_irq(card->netdev->irq, gelic_net_interrupt,
+ IRQF_DISABLED, "gelic network", card->netdev);
+
+ if (result) {
+ dev_info(ctodev(card), "%s:%d: request_irq failed (%d)\n",
+ __func__, __LINE__, result);
+ goto fail_request_irq;
+ }
+
+ return 0;
+
+fail_request_irq:
+ ps3_sb_event_receive_port_destroy(card->dev, card->netdev->irq);
+ card->netdev->irq = NO_IRQ;
+fail_alloc_irq:
+ return result;
+}
+
+
+/**
+ * gelic_net_open - called upon ifonfig up
+ * @netdev: interface device structure
+ *
+ * returns 0 on success, <0 on failure
+ *
+ * gelic_net_open allocates all the descriptors and memory needed for
+ * operation, sets up multicast list and enables interrupts
+ */
+static int gelic_net_open(struct net_device *netdev)
+{
+ struct gelic_net_card *card = netdev_priv(netdev);
+
+ dev_dbg(ctodev(card), " -> %s:%d\n", __func__, __LINE__);
+
+ gelic_net_open_device(card);
+
+ if (gelic_net_init_chain(card, &card->tx_chain,
+ card->descr, GELIC_NET_TX_DESCRIPTORS))
+ goto alloc_tx_failed;
+ if (gelic_net_init_chain(card, &card->rx_chain,
+ card->descr + GELIC_NET_RX_DESCRIPTORS,
+ GELIC_NET_RX_DESCRIPTORS))
+ goto alloc_rx_failed;
+
+ /* head of chain */
+ card->tx_top = card->tx_chain.head;
+ card->rx_top = card->rx_chain.head;
+ dev_dbg(ctodev(card), "descr rx %p, tx %p, size %#lx, num %#x\n",
+ card->rx_top, card->tx_top, sizeof(struct gelic_net_descr),
+ GELIC_NET_RX_DESCRIPTORS);
+ /* allocate rx skbs */
+ if (gelic_net_alloc_rx_skbs(card))
+ goto alloc_skbs_failed;
+
+ card->tx_dma_progress = 0;
+ card->ghiintmask = GELIC_NET_RXINT | GELIC_NET_TXINT;
+
+ gelic_net_set_irq_mask(card, card->ghiintmask);
+ gelic_net_enable_rxdmac(card);
+
+ netif_start_queue(netdev);
+ netif_carrier_on(netdev);
+ netif_poll_enable(netdev);
+
+ return 0;
+
+alloc_skbs_failed:
+ gelic_net_free_chain(card, card->rx_top);
+alloc_rx_failed:
+ gelic_net_free_chain(card, card->tx_top);
+alloc_tx_failed:
+ return -ENOMEM;
+}
+
+#ifdef GELIC_NET_ETHTOOL
+static void gelic_net_get_drvinfo (struct net_device *netdev,
+ struct ethtool_drvinfo *info)
+{
+ strncpy(info->driver, DRV_NAME, sizeof(info->driver) - 1);
+ strncpy(info->version, DRV_VERSION, sizeof(info->version) - 1);
+}
+
+static int gelic_net_get_settings(struct net_device *netdev,
+ struct ethtool_cmd *cmd)
+{
+ struct gelic_net_card *card = netdev_priv(netdev);
+ int status;
+ u64 v1, v2;
+ int speed, duplex;
+
+ speed = duplex = -1;
+ status = lv1_net_control(bus_id(card), dev_id(card),
+ GELIC_NET_GET_ETH_PORT_STATUS, GELIC_NET_PORT, 0, 0,
+ &v1, &v2);
+ if (status) {
+ /* link down */
+ } else {
+ if (v1 & GELIC_NET_FULL_DUPLEX) {
+ duplex = DUPLEX_FULL;
+ } else {
+ duplex = DUPLEX_HALF;
+ }
+
+ if (v1 & GELIC_NET_SPEED_10 ) {
+ speed = SPEED_10;
+ } else if (v1 & GELIC_NET_SPEED_100) {
+ speed = SPEED_100;
+ } else if (v1 & GELIC_NET_SPEED_1000) {
+ speed = SPEED_1000;
+ }
+ }
+ cmd->supported = SUPPORTED_TP | SUPPORTED_Autoneg |
+ SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full;
+ cmd->advertising = cmd->supported;
+ cmd->speed = speed;
+ cmd->duplex = duplex;
+ cmd->autoneg = AUTONEG_ENABLE; /* always enabled */
+ cmd->port = PORT_TP;
+
+ return 0;
+}
+
+static u32 gelic_net_get_link(struct net_device *netdev)
+{
+ struct gelic_net_card *card = netdev_priv(netdev);
+ int status;
+ u64 v1, v2;
+ int link;
+
+ status = lv1_net_control(bus_id(card), dev_id(card),
+ GELIC_NET_GET_ETH_PORT_STATUS, GELIC_NET_PORT, 0, 0,
+ &v1, &v2);
+ if (status)
+ return 0; /* link down */
+
+ if (v1 & GELIC_NET_LINK_UP)
+ link = 1;
+ else
+ link = 0;
+
+ return link;
+}
+
+static int gelic_net_nway_reset(struct net_device *netdev)
+{
+ if (netif_running(netdev)) {
+ gelic_net_stop(netdev);
+ gelic_net_open(netdev);
+ }
+ return 0;
+}
+
+static u32 gelic_net_get_tx_csum(struct net_device *netdev)
+{
+ return (netdev->features & NETIF_F_IP_CSUM) != 0;
+}
+
+static int gelic_net_set_tx_csum(struct net_device *netdev, u32 data)
+{
+ if (data)
+ netdev->features |= NETIF_F_IP_CSUM;
+ else
+ netdev->features &= ~NETIF_F_IP_CSUM;
+
+ return 0;
+}
+
+static u32 gelic_net_get_rx_csum(struct net_device *netdev)
+{
+ struct gelic_net_card *card = netdev_priv(netdev);
+
+ return card->rx_csum;
+}
+
+static int gelic_net_set_rx_csum(struct net_device *netdev, u32 data)
+{
+ struct gelic_net_card *card = netdev_priv(netdev);
+
+ card->rx_csum = data;
+ return 0;
+}
+
+static struct ethtool_ops gelic_net_ethtool_ops = {
+ .get_drvinfo = gelic_net_get_drvinfo,
+ .get_settings = gelic_net_get_settings,
+ .get_link = gelic_net_get_link,
+ .nway_reset = gelic_net_nway_reset,
+ .get_tx_csum = gelic_net_get_tx_csum,
+ .set_tx_csum = gelic_net_set_tx_csum,
+ .get_rx_csum = gelic_net_get_rx_csum,
+ .set_rx_csum = gelic_net_set_rx_csum,
+};
+#endif
+
+/**
+ * gelic_net_tx_timeout_task - task scheduled by the watchdog timeout
+ * function (to be called not under interrupt status)
+ * @work: work is context of tx timout task
+ *
+ * called as task when tx hangs, resets interface (if interface is up)
+ */
+static void gelic_net_tx_timeout_task(struct work_struct *work)
+{
+ struct gelic_net_card *card =
+ container_of(work, struct gelic_net_card, tx_timeout_task);
+ struct net_device *netdev = card->netdev;
+
+ dev_info(ctodev(card), "%s:Timed out. Restarting... \n", __func__);
+
+ if (!(netdev->flags & IFF_UP))
+ goto out;
+
+ netif_device_detach(netdev);
+ gelic_net_stop(netdev);
+
+ gelic_net_open(netdev);
+ netif_device_attach(netdev);
+
+out:
+ atomic_dec(&card->tx_timeout_task_counter);
+}
+
+/**
+ * gelic_net_tx_timeout - called when the tx timeout watchdog kicks in.
+ * @netdev: interface device structure
+ *
+ * called, if tx hangs. Schedules a task that resets the interface
+ */
+static void gelic_net_tx_timeout(struct net_device *netdev)
+{
+ struct gelic_net_card *card;
+
+ card = netdev_priv(netdev);
+ atomic_inc(&card->tx_timeout_task_counter);
+ if (netdev->flags & IFF_UP)
+ schedule_work(&card->tx_timeout_task);
+ else
+ atomic_dec(&card->tx_timeout_task_counter);
+}
+
+/**
+ * gelic_net_setup_netdev_ops - initialization of net_device operations
+ * @netdev: net_device structure
+ *
+ * fills out function pointers in the net_device structure
+ */
+static void gelic_net_setup_netdev_ops(struct net_device *netdev)
+{
+ netdev->open = &gelic_net_open;
+ netdev->stop = &gelic_net_stop;
+ netdev->hard_start_xmit = &gelic_net_xmit;
+ netdev->get_stats = &gelic_net_get_stats;
+ netdev->set_multicast_list = &gelic_net_set_multi;
+ netdev->change_mtu = &gelic_net_change_mtu;
+ /* tx watchdog */
+ netdev->tx_timeout = &gelic_net_tx_timeout;
+ netdev->watchdog_timeo = GELIC_NET_WATCHDOG_TIMEOUT;
+ /* NAPI */
+ netdev->poll = &gelic_net_poll;
+ netdev->weight = GELIC_NET_NAPI_WEIGHT;
+#ifdef GELIC_NET_ETHTOOL
+ netdev->ethtool_ops = &gelic_net_ethtool_ops;
+#endif
+}
+
+/**
+ * gelic_net_setup_netdev - initialization of net_device
+ * @card: card structure
+ *
+ * Returns 0 on success or <0 on failure
+ *
+ * gelic_net_setup_netdev initializes the net_device structure
+ **/
+static int gelic_net_setup_netdev(struct gelic_net_card *card)
+{
+ struct net_device *netdev = card->netdev;
+ struct sockaddr addr;
+ unsigned int i;
+ int status;
+ u64 v1, v2;
+
+ SET_MODULE_OWNER(netdev);
+ SET_NETDEV_DEV(netdev, &card->dev->core);
+ spin_lock_init(&card->tx_dma_lock);
+
+ card->rx_csum = GELIC_NET_RX_CSUM_DEFAULT;
+
+ gelic_net_setup_netdev_ops(netdev);
+
+ netdev->features = NETIF_F_IP_CSUM;
+
+ status = lv1_net_control(bus_id(card), dev_id(card),
+ GELIC_NET_GET_MAC_ADDRESS,
+ 0, 0, 0, &v1, &v2);
+ if (status || !is_valid_ether_addr((u8 *)&v1)) {
+ dev_info(ctodev(card),
+ "%s:lv1_net_control GET_MAC_ADDR failed %d\n",
+ __func__, status);
+ return -EINVAL;
+ }
+ v1 <<= 16;
+ memcpy(addr.sa_data, &v1, ETH_ALEN);
+ memcpy(netdev->dev_addr, addr.sa_data, ETH_ALEN);
+ dev_info(ctodev(card), "MAC addr %02x:%02x:%02x:%02x:%02x:%02x\n",
+ netdev->dev_addr[0], netdev->dev_addr[1],
+ netdev->dev_addr[2], netdev->dev_addr[3],
+ netdev->dev_addr[4], netdev->dev_addr[5]);
+
+ card->vlan_index = -1; /* no vlan */
+ for (i = 0; i < GELIC_NET_VLAN_MAX; i++) {
+ status = lv1_net_control(bus_id(card), dev_id(card),
+ GELIC_NET_GET_VLAN_ID,
+ i + 1, /* index; one based */
+ 0, 0, &v1, &v2);
+ if (status == GELIC_NET_VLAN_NO_ENTRY) {
+ dev_dbg(ctodev(card),
+ "GELIC_VLAN_ID no entry:%d, VLAN disabled\n",
+ status);
+ card->vlan_id[i] = 0;
+ } else if (status) {
+ dev_dbg(ctodev(card),
+ "%s:GELIC_NET_VLAN_ID faild, status=%d\n",
+ __func__, status);
+ card->vlan_id[i] = 0;
+ } else {
+ card->vlan_id[i] = (u32)v1;
+ dev_dbg(ctodev(card), "vlan_id:%d, %lx\n", i, v1);
+ }
+ }
+ if (card->vlan_id[GELIC_NET_VLAN_WIRED - 1])
+ card->vlan_index = GELIC_NET_VLAN_WIRED - 1;
+
+ status = register_netdev(netdev);
+ if (status) {
+ dev_err(ctodev(card), "%s:Couldn't register net_device: %d\n",
+ __func__, status);
+ return status;
+ }
+
+ return 0;
+}
+
+/**
+ * gelic_net_alloc_card - allocates net_device and card structure
+ *
+ * returns the card structure or NULL in case of errors
+ *
+ * the card and net_device structures are linked to each other
+ */
+static struct gelic_net_card *gelic_net_alloc_card(void)
+{
+ struct net_device *netdev;
+ struct gelic_net_card *card;
+ size_t alloc_size;
+
+ alloc_size = sizeof (*card) +
+ sizeof (struct gelic_net_descr) * GELIC_NET_RX_DESCRIPTORS +
+ sizeof (struct gelic_net_descr) * GELIC_NET_TX_DESCRIPTORS;
+ /*
+ * we assume private data is allocated 32 bytes (or more) aligned
+ * so that gelic_net_descr should be 32 bytes aligned.
+ * Current alloc_etherdev() does do it because NETDEV_ALIGN
+ * is 32.
+ * check this assumption here.
+ */
+ BUILD_BUG_ON(NETDEV_ALIGN < 32);
+ BUILD_BUG_ON(offsetof(struct gelic_net_card, irq_status) % 8);
+ BUILD_BUG_ON(offsetof(struct gelic_net_card, descr) % 32);
+
+ netdev = alloc_etherdev(alloc_size);
+ if (!netdev)
+ return NULL;
+
+ card = netdev_priv(netdev);
+ card->netdev = netdev;
+ INIT_WORK(&card->tx_timeout_task, gelic_net_tx_timeout_task);
+ init_waitqueue_head(&card->waitq);
+ atomic_set(&card->tx_timeout_task_counter, 0);
+
+ return card;
+}
+
+/**
+ * ps3_gelic_driver_probe - add a device to the control of this driver
+ */
+static int ps3_gelic_driver_probe (struct ps3_system_bus_device *dev)
+{
+ struct gelic_net_card *card = gelic_net_alloc_card();
+ int result;
+
+ if (!card) {
+ dev_info(&dev->core, "gelic_net_alloc_card failed\n");
+ result = -ENOMEM;
+ goto fail_alloc_card;
+ }
+
+ ps3_system_bus_set_driver_data(dev, card);
+ card->dev = dev;
+
+ result = ps3_open_hv_device(dev);
+
+ if (result) {
+ dev_dbg(&dev->core, "ps3_open_hv_device failed\n");
+ goto fail_open;
+ }
+
+ result = ps3_dma_region_create(dev->d_region);
+
+ if (result) {
+ dev_dbg(&dev->core, "ps3_dma_region_create failed(%d)\n",
+ result);
+ BUG_ON("check region type");
+ goto fail_dma_region;
+ }
+
+ result = lv1_net_set_interrupt_status_indicator(bus_id(card),
+ dev_id(card),
+ ps3_mm_phys_to_lpar(__pa(&card->irq_status)),
+ 0);
+
+ if (result) {
+ dev_dbg(&dev->core,
+ "lv1_net_set_interrupt_status_indicator failed: %s\n",
+ ps3_result(result));
+ result = -EIO;
+ goto fail_status_indicator;
+ }
+
+ result = gelic_net_setup_netdev(card);
+
+ if (result) {
+ dev_dbg(&dev->core, "%s:%d: ps3_dma_region_create failed: "
+ "(%d)\n", __func__, __LINE__, result);
+ goto fail_setup_netdev;
+ }
+
+ return 0;
+
+fail_setup_netdev:
+ lv1_net_set_interrupt_status_indicator(bus_id(card),
+ bus_id(card),
+ 0 , 0);
+fail_status_indicator:
+ ps3_dma_region_free(dev->d_region);
+fail_dma_region:
+ ps3_close_hv_device(dev);
+fail_open:
+ ps3_system_bus_set_driver_data(dev, NULL);
+ free_netdev(card->netdev);
+fail_alloc_card:
+ return result;
+}
+
+/**
+ * ps3_gelic_driver_remove - remove a device from the control of this driver
+ */
+
+static int ps3_gelic_driver_remove (struct ps3_system_bus_device *dev)
+{
+ struct gelic_net_card *card = ps3_system_bus_get_driver_data(dev);
+
+ wait_event(card->waitq,
+ atomic_read(&card->tx_timeout_task_counter) == 0);
+
+ lv1_net_set_interrupt_status_indicator(bus_id(card), dev_id(card),
+ 0 , 0);
+
+ unregister_netdev(card->netdev);
+ free_netdev(card->netdev);
+
+ ps3_system_bus_set_driver_data(dev, NULL);
+
+ ps3_dma_region_free(dev->d_region);
+
+ ps3_close_hv_device(dev);
+
+ return 0;
+}
+
+static struct ps3_system_bus_driver ps3_gelic_driver = {
+ .match_id = PS3_MATCH_ID_GELIC,
+ .probe = ps3_gelic_driver_probe,
+ .remove = ps3_gelic_driver_remove,
+ .shutdown = ps3_gelic_driver_remove,
+ .core.name = "ps3_gelic_driver",
+ .core.owner = THIS_MODULE,
+};
+
+static int __init ps3_gelic_driver_init (void)
+{
+ return firmware_has_feature(FW_FEATURE_PS3_LV1)
+ ? ps3_system_bus_driver_register(&ps3_gelic_driver)
+ : -ENODEV;
+}
+
+static void __exit ps3_gelic_driver_exit (void)
+{
+ ps3_system_bus_driver_unregister(&ps3_gelic_driver);
+}
+
+module_init (ps3_gelic_driver_init);
+module_exit (ps3_gelic_driver_exit);
+
+MODULE_ALIAS(PS3_MODULE_ALIAS_GELIC);
+
diff --git a/drivers/net/ps3_gelic_net.h b/drivers/net/ps3_gelic_net.h
new file mode 100644
index 0000000..5e1c286
--- /dev/null
+++ b/drivers/net/ps3_gelic_net.h
@@ -0,0 +1,239 @@
+/*
+ * PS3 Platfom gelic network driver.
+ *
+ * Copyright (C) 2007 Sony Computer Entertainment Inc.
+ * Copyright 2006, 2007 Sony Corporation.
+ *
+ * This file is based on: spider_net.h
+ *
+ * (C) Copyright IBM Corp. 2005
+ *
+ * Authors : Utz Bacher <utz.bacher@...ibm.com>
+ * Jens Osterkamp <Jens.Osterkamp@...ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef _GELIC_NET_H
+#define _GELIC_NET_H
+
+#define GELIC_NET_DRV_NAME "Gelic Network Driver"
+#define GELIC_NET_DRV_VERSION "1.0"
+
+#define GELIC_NET_ETHTOOL /* use ethtool */
+
+/* ioctl */
+#define GELIC_NET_GET_MODE (SIOCDEVPRIVATE + 0)
+#define GELIC_NET_SET_MODE (SIOCDEVPRIVATE + 1)
+
+/* descriptors */
+#define GELIC_NET_RX_DESCRIPTORS 128 /* num of descriptors */
+#define GELIC_NET_TX_DESCRIPTORS 128 /* num of descriptors */
+
+#define GELIC_NET_MAX_MTU 2308
+#define GELIC_NET_MIN_MTU 64
+#define GELIC_NET_RXBUF_ALIGN 128
+#define GELIC_NET_RX_CSUM_DEFAULT 1 /* hw chksum */
+#define GELIC_NET_WATCHDOG_TIMEOUT 5*HZ
+#define GELIC_NET_NAPI_WEIGHT (GELIC_NET_RX_DESCRIPTORS)
+#define GELIC_NET_BROADCAST_ADDR 0xffffffffffffL
+#define GELIC_NET_VLAN_POS (VLAN_ETH_ALEN * 2)
+#define GELIC_NET_VLAN_MAX 4
+#define GELIC_NET_MC_COUNT_MAX 32 /* multicast address list */
+
+enum gelic_net_int0_status {
+ GELIC_NET_GDTDCEINT = 24,
+ GELIC_NET_GRFANMINT = 28,
+};
+
+/* GHIINT1STS bits */
+enum gelic_net_int1_status {
+ GELIC_NET_GDADCEINT = 14,
+};
+
+/* interrupt mask */
+#define GELIC_NET_TXINT (1L << (GELIC_NET_GDTDCEINT + 32))
+
+#define GELIC_NET_RXINT0 (1L << (GELIC_NET_GRFANMINT + 32))
+#define GELIC_NET_RXINT1 (1L << GELIC_NET_GDADCEINT)
+#define GELIC_NET_RXINT (GELIC_NET_RXINT0 | GELIC_NET_RXINT1)
+
+ /* RX descriptor data_status bits */
+#define GELIC_NET_RXDMADU 0x80000000 /* destination MAC addr unknown */
+#define GELIC_NET_RXLSTFBF 0x40000000 /* last frame buffer */
+#define GELIC_NET_RXIPCHK 0x20000000 /* IP checksum performed */
+#define GELIC_NET_RXTCPCHK 0x10000000 /* TCP/UDP checksup performed */
+#define GELIC_NET_RXIPSPKT 0x08000000 /* IPsec packet */
+#define GELIC_NET_RXIPSAHPRT 0x04000000 /* IPsec AH protocol performed */
+#define GELIC_NET_RXIPSESPPRT 0x02000000 /* IPsec ESP protocol performed */
+#define GELIC_NET_RXSESPAH 0x01000000 /*
+ * IPsec ESP protocol auth
+ * performed
+ */
+
+#define GELIC_NET_RXWTPKT 0x00C00000 /*
+ * wakeup trigger packet
+ * 01: Magic Packet (TM)
+ * 10: ARP packet
+ * 11: Multicast MAC addr
+ */
+#define GELIC_NET_RXVLNPKT 0x00200000 /* VLAN packet */
+/* bit 20..16 reserved */
+#define GELIC_NET_RXRECNUM 0x0000ff00 /* reception receipt number */
+/* bit 7..0 reserved */
+
+#define GELIC_NET_TXDESC_TAIL 0
+#define GELIC_NET_DATA_STATUS_CHK_MASK (GELIC_NET_RXIPCHK | GELIC_NET_RXTCPCHK)
+
+/* RX descriptor data_error bits */
+/* bit 31 reserved */
+#define GELIC_NET_RXALNERR 0x40000000 /* alignement error 10/100M */
+#define GELIC_NET_RXOVERERR 0x20000000 /* oversize error */
+#define GELIC_NET_RXRNTERR 0x10000000 /* Runt error */
+#define GELIC_NET_RXIPCHKERR 0x08000000 /* IP checksum error */
+#define GELIC_NET_RXTCPCHKERR 0x04000000 /* TCP/UDP checksum error */
+#define GELIC_NET_RXUMCHSP 0x02000000 /* unmatched sp on sp */
+#define GELIC_NET_RXUMCHSPI 0x01000000 /* unmatched SPI on SAD */
+#define GELIC_NET_RXUMCHSAD 0x00800000 /* unmatched SAD */
+#define GELIC_NET_RXIPSAHERR 0x00400000 /* auth error on AH protocol
+ * processing */
+#define GELIC_NET_RXIPSESPAHERR 0x00200000 /* auth error on ESP protocol
+ * processing */
+#define GELIC_NET_RXDRPPKT 0x00100000 /* drop packet */
+#define GELIC_NET_RXIPFMTERR 0x00080000 /* IP packet format error */
+/* bit 18 reserved */
+#define GELIC_NET_RXDATAERR 0x00020000 /* IP packet format error */
+#define GELIC_NET_RXCALERR 0x00010000 /* cariier extension length
+ * error */
+#define GELIC_NET_RXCREXERR 0x00008000 /* carrier extention error */
+#define GELIC_NET_RXMLTCST 0x00004000 /* multicast address frame */
+/* bit 13..0 reserved */
+#define GELIC_NET_DATA_ERROR_CHK_MASK \
+ (GELIC_NET_RXIPCHKERR | GELIC_NET_RXTCPCHKERR)
+
+
+/* tx descriptor command and status */
+#define GELIC_NET_DMAC_CMDSTAT_NOCS 0xa0080000 /* middle of frame */
+#define GELIC_NET_DMAC_CMDSTAT_TCPCS 0xa00a0000
+#define GELIC_NET_DMAC_CMDSTAT_UDPCS 0xa00b0000
+#define GELIC_NET_DMAC_CMDSTAT_END_FRAME 0x00040000 /* end of frame */
+
+#define GELIC_NET_DMAC_CMDSTAT_RXDCEIS 0x00000002 /* descriptor chain end
+ * interrupt status */
+
+#define GELIC_NET_DMAC_CMDSTAT_CHAIN_END 0x00000002 /* RXDCEIS:DMA stopped */
+#define GELIC_NET_DMAC_CMDSTAT_NOT_IN_USE 0xb0000000
+#define GELIC_NET_DESCR_IND_PROC_SHIFT 28
+#define GELIC_NET_DESCR_IND_PROC_MASKO 0x0fffffff
+
+
+enum gelic_net_descr_status {
+ GELIC_NET_DESCR_COMPLETE = 0x00, /* used in rx and tx */
+ GELIC_NET_DESCR_RESPONSE_ERROR = 0x01, /* used in rx and tx */
+ GELIC_NET_DESCR_PROTECTION_ERROR = 0x02, /* used in rx and tx */
+ GELIC_NET_DESCR_FRAME_END = 0x04, /* used in rx */
+ GELIC_NET_DESCR_FORCE_END = 0x05, /* used in rx and tx */
+ GELIC_NET_DESCR_CARDOWNED = 0x0a, /* used in rx and tx */
+ GELIC_NET_DESCR_NOT_IN_USE /* any other value */
+};
+/* for lv1_net_control */
+#define GELIC_NET_GET_MAC_ADDRESS 0x0000000000000001
+#define GELIC_NET_GET_ETH_PORT_STATUS 0x0000000000000002
+#define GELIC_NET_SET_NEGOTIATION_MODE 0x0000000000000003
+#define GELIC_NET_GET_VLAN_ID 0x0000000000000004
+
+#define GELIC_NET_LINK_UP 0x0000000000000001
+#define GELIC_NET_FULL_DUPLEX 0x0000000000000002
+#define GELIC_NET_AUTO_NEG 0x0000000000000004
+#define GELIC_NET_SPEED_10 0x0000000000000010
+#define GELIC_NET_SPEED_100 0x0000000000000020
+#define GELIC_NET_SPEED_1000 0x0000000000000040
+
+#define GELIC_NET_VLAN_ALL 0x0000000000000001
+#define GELIC_NET_VLAN_WIRED 0x0000000000000002
+#define GELIC_NET_VLAN_WIRELESS 0x0000000000000003
+#define GELIC_NET_VLAN_PSP 0x0000000000000004
+#define GELIC_NET_VLAN_PORT0 0x0000000000000010
+#define GELIC_NET_VLAN_PORT1 0x0000000000000011
+#define GELIC_NET_VLAN_PORT2 0x0000000000000012
+#define GELIC_NET_VLAN_DAEMON_CLIENT_BSS 0x0000000000000013
+#define GELIC_NET_VLAN_LIBERO_CLIENT_BSS 0x0000000000000014
+#define GELIC_NET_VLAN_NO_ENTRY -6
+
+#define GELIC_NET_PORT 2 /* for port status */
+
+/* size of hardware part of gelic descriptor */
+#define GELIC_NET_DESCR_SIZE (32)
+struct gelic_net_descr {
+ /* as defined by the hardware */
+ u32 buf_addr;
+ u32 buf_size;
+ u32 next_descr_addr;
+ u32 dmac_cmd_status;
+ u32 result_size;
+ u32 valid_size; /* all zeroes for tx */
+ u32 data_status;
+ u32 data_error; /* all zeroes for tx */
+
+ /* used in the driver */
+ struct sk_buff *skb;
+ dma_addr_t bus_addr;
+ struct gelic_net_descr *next;
+ struct gelic_net_descr *prev;
+ struct vlan_ethhdr vlan;
+} __attribute__((aligned(32)));
+
+struct gelic_net_descr_chain {
+ /* we walk from tail to head */
+ struct gelic_net_descr *head;
+ struct gelic_net_descr *tail;
+};
+
+struct gelic_net_card {
+ struct net_device *netdev;
+ /*
+ * hypervisor requires irq_status should be
+ * 8 bytes aligned, but u64 member is
+ * always disposed in that manner
+ */
+ u64 irq_status;
+ u64 ghiintmask;
+
+ struct ps3_system_bus_device *dev;
+ u32 vlan_id[GELIC_NET_VLAN_MAX];
+ int vlan_index;
+
+ struct gelic_net_descr_chain tx_chain;
+ struct gelic_net_descr_chain rx_chain;
+ /* gurad dmac descriptor chain*/
+ spinlock_t chain_lock;
+
+ struct net_device_stats netdev_stats;
+ int rx_csum;
+ /* guard tx_dma_progress */
+ spinlock_t tx_dma_lock;
+ int tx_dma_progress;
+
+ struct work_struct tx_timeout_task;
+ atomic_t tx_timeout_task_counter;
+ wait_queue_head_t waitq;
+
+ struct gelic_net_descr *tx_top, *rx_top;
+ struct gelic_net_descr descr[0];
+};
+
+
+extern unsigned long p_to_lp(long pa);
+
+#endif /* _GELIC_NET_H */
diff --git a/drivers/net/rrunner.c b/drivers/net/rrunner.c
index 25c73d4..5c2e41f 100644
--- a/drivers/net/rrunner.c
+++ b/drivers/net/rrunner.c
@@ -516,7 +516,7 @@ static unsigned int write_eeprom(struct rr_private *rrpriv,
}
-static int __init rr_init(struct net_device *dev)
+static int __devinit rr_init(struct net_device *dev)
{
struct rr_private *rrpriv;
struct rr_regs __iomem *regs;
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 2d826ff..fa29a40 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -8036,7 +8036,7 @@ static void lro_append_pkt(struct s2io_nic *sp, struct lro *lro,
/**
* s2io_io_error_detected - called when PCI error is detected
* @pdev: Pointer to PCI device
- * @state: The current pci conneection state
+ * @state: The current pci connection state
*
* This function is called after a PCI bus error affecting
* this device has been detected.
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 2cb2e15..7c6e480 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -573,7 +573,7 @@ static int __devinit sis900_probe(struct pci_dev *pci_dev,
* return error if it failed to found.
*/
-static int __init sis900_mii_probe(struct net_device * net_dev)
+static int __devinit sis900_mii_probe(struct net_device * net_dev)
{
struct sis900_private * sis_priv = net_dev->priv;
const char *dev_name = pci_name(sis_priv->pci_dev);
=======================================================================
SNIP snip obvious sk98lin driver removal patches snip SNIP
=======================================================================
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index b51d73c..a2f3215 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -39,6 +39,7 @@
#include <linux/workqueue.h>
#include <linux/if_vlan.h>
#include <linux/prefetch.h>
+#include <linux/debugfs.h>
#include <linux/mii.h>
#include <asm/irq.h>
@@ -50,7 +51,7 @@
#include "sky2.h"
#define DRV_NAME "sky2"
-#define DRV_VERSION "1.15"
+#define DRV_VERSION "1.16"
#define PFX DRV_NAME " "
/*
@@ -64,7 +65,6 @@
#define RX_MAX_PENDING (RX_LE_SIZE/6 - 2)
#define RX_DEF_PENDING RX_MAX_PENDING
#define RX_SKB_ALIGN 8
-#define RX_BUF_WRITE 16
#define TX_RING_SIZE 512
#define TX_DEF_PENDING (TX_RING_SIZE - 1)
@@ -77,6 +77,9 @@
#define NAPI_WEIGHT 64
#define PHY_RETRIES 1000
+#define SKY2_EEPROM_MAGIC 0x9955aabb
+
+
#define RING_NEXT(x,s) (((x)+1) & ((s)-1))
static const u32 default_msg =
@@ -96,7 +99,7 @@ static int disable_msi = 0;
module_param(disable_msi, int, 0);
MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
-static int idle_timeout = 0;
+static int idle_timeout = 100;
module_param(idle_timeout, int, 0);
MODULE_PARM_DESC(idle_timeout, "Watchdog timer for lost interrupts (ms)");
@@ -890,24 +893,18 @@ static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2)
return le;
}
-/* Return high part of DMA address (could be 32 or 64 bit) */
-static inline u32 high32(dma_addr_t a)
-{
- return sizeof(a) > sizeof(u32) ? (a >> 16) >> 16 : 0;
-}
-
/* Build description to hardware for one receive segment */
static void sky2_rx_add(struct sky2_port *sky2, u8 op,
dma_addr_t map, unsigned len)
{
struct sky2_rx_le *le;
- u32 hi = high32(map);
+ u32 hi = upper_32_bits(map);
if (sky2->rx_addr64 != hi) {
le = sky2_next_rx(sky2);
le->addr = cpu_to_le32(hi);
le->opcode = OP_ADDR64 | HW_OWNER;
- sky2->rx_addr64 = high32(map + len);
+ sky2->rx_addr64 = upper_32_bits(map + len);
}
le = sky2_next_rx(sky2);
@@ -1137,6 +1134,11 @@ nomem:
return NULL;
}
+static inline void sky2_rx_update(struct sky2_port *sky2, unsigned rxq)
+{
+ sky2_put_idx(sky2->hw, rxq, sky2->rx_put);
+}
+
/*
* Allocate and setup receiver buffer pool.
* Normal case this ends up creating one list element for skb
@@ -1172,8 +1174,7 @@ static int sky2_rx_start(struct sky2_port *sky2)
rx_set_checksum(sky2);
/* Space needed for frame data + headers rounded up */
- size = ALIGN(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8)
- + 8;
+ size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8);
/* Stopping point for hardware truncation */
thresh = (size - 8) / sizeof(u32);
@@ -1228,7 +1229,7 @@ static int sky2_rx_start(struct sky2_port *sky2)
}
/* Tell chip about available buffers */
- sky2_put_idx(hw, rxq, sky2->rx_put);
+ sky2_rx_update(sky2, rxq);
return 0;
nomem:
sky2_rx_clean(sky2);
@@ -1265,6 +1266,8 @@ static int sky2_up(struct net_device *dev)
if (netif_msg_ifup(sky2))
printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
+ netif_carrier_off(dev);
+
/* must be power of 2 */
sky2->tx_le = pci_alloc_consistent(hw->pdev,
TX_RING_SIZE *
@@ -1415,14 +1418,15 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
len = skb_headlen(skb);
mapping = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE);
- addr64 = high32(mapping);
+ addr64 = upper_32_bits(mapping);
/* Send high bits if changed or crosses boundary */
- if (addr64 != sky2->tx_addr64 || high32(mapping + len) != sky2->tx_addr64) {
+ if (addr64 != sky2->tx_addr64 ||
+ upper_32_bits(mapping + len) != sky2->tx_addr64) {
le = get_tx_le(sky2);
le->addr = cpu_to_le32(addr64);
le->opcode = OP_ADDR64 | HW_OWNER;
- sky2->tx_addr64 = high32(mapping + len);
+ sky2->tx_addr64 = upper_32_bits(mapping + len);
}
/* Check for TCP Segmentation Offload */
@@ -1502,7 +1506,7 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
mapping = pci_map_page(hw->pdev, frag->page, frag->page_offset,
frag->size, PCI_DMA_TODEVICE);
- addr64 = high32(mapping);
+ addr64 = upper_32_bits(mapping);
if (addr64 != sky2->tx_addr64) {
le = get_tx_le(sky2);
le->addr = cpu_to_le32(addr64);
@@ -1572,13 +1576,13 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
if (unlikely(netif_msg_tx_done(sky2)))
printk(KERN_DEBUG "%s: tx done %u\n",
dev->name, idx);
+
sky2->net_stats.tx_packets++;
sky2->net_stats.tx_bytes += re->skb->len;
dev_kfree_skb_any(re->skb);
+ sky2->tx_next = RING_NEXT(idx, TX_RING_SIZE);
}
-
- le->opcode = 0; /* paranoia */
}
sky2->tx_cons = idx;
@@ -1616,7 +1620,6 @@ static int sky2_down(struct net_device *dev)
/* Stop more packets from being queued */
netif_stop_queue(dev);
- netif_carrier_off(dev);
/* Disable port IRQ */
imask = sky2_read32(hw, B0_IMSK);
@@ -1668,6 +1671,8 @@ static int sky2_down(struct net_device *dev)
sky2_phy_power(hw, port, 0);
+ netif_carrier_off(dev);
+
/* turn off LED's */
sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
@@ -1732,7 +1737,6 @@ static void sky2_link_up(struct sky2_port *sky2)
gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
netif_carrier_on(sky2->netdev);
- netif_wake_queue(sky2->netdev);
/* Turn on link LED */
sky2_write8(hw, SK_REG(port, LNK_LED_REG),
@@ -1784,7 +1788,6 @@ static void sky2_link_down(struct sky2_port *sky2)
gma_write16(hw, port, GM_GP_CTRL, reg);
netif_carrier_off(sky2->netdev);
- netif_stop_queue(sky2->netdev);
/* Turn on link LED */
sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
@@ -2055,8 +2058,6 @@ static struct sk_buff *receive_new(struct sky2_port *sky2,
struct sk_buff *skb, *nskb;
unsigned hdr_space = sky2->rx_data_size;
- pr_debug(PFX "receive new length=%d\n", length);
-
/* Don't be tricky about reusing pages (yet) */
nskb = sky2_rx_alloc(sky2);
if (unlikely(!nskb))
@@ -2100,6 +2101,9 @@ static struct sk_buff *sky2_receive(struct net_device *dev,
if (!(status & GMR_FS_RX_OK))
goto resubmit;
+ if (status >> 16 != length)
+ goto len_mismatch;
+
if (length < copybreak)
skb = receive_copy(sky2, re, length);
else
@@ -2109,6 +2113,11 @@ resubmit:
return skb;
+len_mismatch:
+ /* Truncation of overlength packets
+ causes PHY length to not match MAC length */
+ ++sky2->net_stats.rx_length_errors;
+
error:
++sky2->net_stats.rx_errors;
if (status & GMR_FS_RX_FF_OV) {
@@ -2145,14 +2154,14 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last)
/* Process status response ring */
static int sky2_status_intr(struct sky2_hw *hw, int to_do)
{
- struct sky2_port *sky2;
int work_done = 0;
- unsigned buf_write[2] = { 0, 0 };
+ unsigned rx[2] = { 0, 0 };
u16 hwidx = sky2_read16(hw, STAT_PUT_IDX);
rmb();
while (hw->st_idx != hwidx) {
+ struct sky2_port *sky2;
struct sky2_status_le *le = hw->st_le + hw->st_idx;
unsigned port = le->css & CSS_LINK_BIT;
struct net_device *dev;
@@ -2169,10 +2178,11 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do)
switch (le->opcode & ~HW_OWNER) {
case OP_RXSTAT:
+ ++rx[port];
skb = sky2_receive(dev, length, status);
if (unlikely(!skb)) {
sky2->net_stats.rx_dropped++;
- goto force_update;
+ break;
}
/* This chip reports checksum status differently */
@@ -2199,13 +2209,6 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do)
#endif
netif_receive_skb(skb);
- /* Update receiver after 16 frames */
- if (++buf_write[port] == RX_BUF_WRITE) {
-force_update:
- sky2_put_idx(hw, rxqaddr[port], sky2->rx_put);
- buf_write[port] = 0;
- }
-
/* Stop after net poll weight */
if (++work_done >= to_do)
goto exit_loop;
@@ -2261,24 +2264,18 @@ force_update:
if (net_ratelimit())
printk(KERN_WARNING PFX
"unknown status opcode 0x%x\n", le->opcode);
- goto exit_loop;
}
}
/* Fully processed status ring so clear irq */
sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
- mmiowb();
exit_loop:
- if (buf_write[0]) {
- sky2 = netdev_priv(hw->dev[0]);
- sky2_put_idx(hw, Q_R1, sky2->rx_put);
- }
+ if (rx[0])
+ sky2_rx_update(netdev_priv(hw->dev[0]), Q_R1);
- if (buf_write[1]) {
- sky2 = netdev_priv(hw->dev[1]);
- sky2_put_idx(hw, Q_R2, sky2->rx_put);
- }
+ if (rx[1])
+ sky2_rx_update(netdev_priv(hw->dev[1]), Q_R2);
return work_done;
}
@@ -2475,8 +2472,7 @@ static void sky2_err_intr(struct sky2_hw *hw, u32 status)
static int sky2_poll(struct net_device *dev0, int *budget)
{
struct sky2_hw *hw = ((struct sky2_port *) netdev_priv(dev0))->hw;
- int work_limit = min(dev0->quota, *budget);
- int work_done = 0;
+ int work_done;
u32 status = sky2_read32(hw, B0_Y2_SP_EISR);
if (unlikely(status & Y2_IS_ERROR))
@@ -2488,18 +2484,25 @@ static int sky2_poll(struct net_device *dev0, int *budget)
if (status & Y2_IS_IRQ_PHY2)
sky2_phy_intr(hw, 1);
- work_done = sky2_status_intr(hw, work_limit);
- if (work_done < work_limit) {
- netif_rx_complete(dev0);
+ work_done = sky2_status_intr(hw, min(dev0->quota, *budget));
+ *budget -= work_done;
+ dev0->quota -= work_done;
- /* end of interrupt, re-enables also acts as I/O synchronization */
- sky2_read32(hw, B0_Y2_SP_LISR);
- return 0;
- } else {
- *budget -= work_done;
- dev0->quota -= work_done;
+ /* More work? */
+ if (hw->st_idx != sky2_read16(hw, STAT_PUT_IDX))
return 1;
+
+ /* Bug/Errata workaround?
+ * Need to kick the TX irq moderation timer.
+ */
+ if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_START) {
+ sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
+ sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
}
+ netif_rx_complete(dev0);
+
+ sky2_read32(hw, B0_Y2_SP_LISR);
+ return 0;
}
static irqreturn_t sky2_intr(int irq, void *dev_id)
@@ -2723,8 +2726,6 @@ static void sky2_restart(struct work_struct *work)
struct net_device *dev;
int i, err;
- dev_dbg(&hw->pdev->dev, "restarting\n");
-
del_timer_sync(&hw->idle_timer);
rtnl_lock();
@@ -3429,39 +3430,315 @@ static int sky2_set_tso(struct net_device *dev, u32 data)
return ethtool_op_set_tso(dev, data);
}
+static int sky2_get_eeprom_len(struct net_device *dev)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ u16 reg2;
+
+ reg2 = sky2_pci_read32(sky2->hw, PCI_DEV_REG2);
+ return 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8);
+}
+
+static u32 sky2_vpd_read(struct sky2_hw *hw, int cap, u16 offset)
+{
+ sky2_pci_write16(hw, cap + PCI_VPD_ADDR, offset);
+
+ while (!(sky2_pci_read16(hw, cap + PCI_VPD_ADDR) & PCI_VPD_ADDR_F))
+ cpu_relax();
+ return sky2_pci_read32(hw, cap + PCI_VPD_DATA);
+}
+
+static void sky2_vpd_write(struct sky2_hw *hw, int cap, u16 offset, u32 val)
+{
+ sky2_pci_write32(hw, cap + PCI_VPD_DATA, val);
+ sky2_pci_write16(hw, cap + PCI_VPD_ADDR, offset | PCI_VPD_ADDR_F);
+ do {
+ cpu_relax();
+ } while (sky2_pci_read16(hw, cap + PCI_VPD_ADDR) & PCI_VPD_ADDR_F);
+}
+
+static int sky2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
+ u8 *data)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ int cap = pci_find_capability(sky2->hw->pdev, PCI_CAP_ID_VPD);
+ int length = eeprom->len;
+ u16 offset = eeprom->offset;
+
+ if (!cap)
+ return -EINVAL;
+
+ eeprom->magic = SKY2_EEPROM_MAGIC;
+
+ while (length > 0) {
+ u32 val = sky2_vpd_read(sky2->hw, cap, offset);
+ int n = min_t(int, length, sizeof(val));
+
+ memcpy(data, &val, n);
+ length -= n;
+ data += n;
+ offset += n;
+ }
+ return 0;
+}
+
+static int sky2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
+ u8 *data)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ int cap = pci_find_capability(sky2->hw->pdev, PCI_CAP_ID_VPD);
+ int length = eeprom->len;
+ u16 offset = eeprom->offset;
+
+ if (!cap)
+ return -EINVAL;
+
+ if (eeprom->magic != SKY2_EEPROM_MAGIC)
+ return -EINVAL;
+
+ while (length > 0) {
+ u32 val;
+ int n = min_t(int, length, sizeof(val));
+
+ if (n < sizeof(val))
+ val = sky2_vpd_read(sky2->hw, cap, offset);
+ memcpy(&val, data, n);
+
+ sky2_vpd_write(sky2->hw, cap, offset, val);
+
+ length -= n;
+ data += n;
+ offset += n;
+ }
+ return 0;
+}
+
+
static const struct ethtool_ops sky2_ethtool_ops = {
- .get_settings = sky2_get_settings,
- .set_settings = sky2_set_settings,
- .get_drvinfo = sky2_get_drvinfo,
- .get_wol = sky2_get_wol,
- .set_wol = sky2_set_wol,
- .get_msglevel = sky2_get_msglevel,
- .set_msglevel = sky2_set_msglevel,
- .nway_reset = sky2_nway_reset,
- .get_regs_len = sky2_get_regs_len,
- .get_regs = sky2_get_regs,
- .get_link = ethtool_op_get_link,
- .get_sg = ethtool_op_get_sg,
- .set_sg = ethtool_op_set_sg,
- .get_tx_csum = ethtool_op_get_tx_csum,
- .set_tx_csum = sky2_set_tx_csum,
- .get_tso = ethtool_op_get_tso,
- .set_tso = sky2_set_tso,
- .get_rx_csum = sky2_get_rx_csum,
- .set_rx_csum = sky2_set_rx_csum,
- .get_strings = sky2_get_strings,
- .get_coalesce = sky2_get_coalesce,
- .set_coalesce = sky2_set_coalesce,
- .get_ringparam = sky2_get_ringparam,
- .set_ringparam = sky2_set_ringparam,
+ .get_settings = sky2_get_settings,
+ .set_settings = sky2_set_settings,
+ .get_drvinfo = sky2_get_drvinfo,
+ .get_wol = sky2_get_wol,
+ .set_wol = sky2_set_wol,
+ .get_msglevel = sky2_get_msglevel,
+ .set_msglevel = sky2_set_msglevel,
+ .nway_reset = sky2_nway_reset,
+ .get_regs_len = sky2_get_regs_len,
+ .get_regs = sky2_get_regs,
+ .get_link = ethtool_op_get_link,
+ .get_eeprom_len = sky2_get_eeprom_len,
+ .get_eeprom = sky2_get_eeprom,
+ .set_eeprom = sky2_set_eeprom,
+ .get_sg = ethtool_op_get_sg,
+ .set_sg = ethtool_op_set_sg,
+ .get_tx_csum = ethtool_op_get_tx_csum,
+ .set_tx_csum = sky2_set_tx_csum,
+ .get_tso = ethtool_op_get_tso,
+ .set_tso = sky2_set_tso,
+ .get_rx_csum = sky2_get_rx_csum,
+ .set_rx_csum = sky2_set_rx_csum,
+ .get_strings = sky2_get_strings,
+ .get_coalesce = sky2_get_coalesce,
+ .set_coalesce = sky2_set_coalesce,
+ .get_ringparam = sky2_get_ringparam,
+ .set_ringparam = sky2_set_ringparam,
.get_pauseparam = sky2_get_pauseparam,
.set_pauseparam = sky2_set_pauseparam,
- .phys_id = sky2_phys_id,
+ .phys_id = sky2_phys_id,
.get_stats_count = sky2_get_stats_count,
.get_ethtool_stats = sky2_get_ethtool_stats,
.get_perm_addr = ethtool_op_get_perm_addr,
};
+#ifdef CONFIG_SKY2_DEBUG
+
+static struct dentry *sky2_debug;
+
+static int sky2_debug_show(struct seq_file *seq, void *v)
+{
+ struct net_device *dev = seq->private;
+ const struct sky2_port *sky2 = netdev_priv(dev);
+ const struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
+ unsigned idx, last;
+ int sop;
+
+ if (!netif_running(dev))
+ return -ENETDOWN;
+
+ seq_printf(seq, "IRQ src=%x mask=%x control=%x\n",
+ sky2_read32(hw, B0_ISRC),
+ sky2_read32(hw, B0_IMSK),
+ sky2_read32(hw, B0_Y2_SP_ICR));
+
+ netif_poll_disable(hw->dev[0]);
+ last = sky2_read16(hw, STAT_PUT_IDX);
+
+ if (hw->st_idx == last)
+ seq_puts(seq, "Status ring (empty)\n");
+ else {
+ seq_puts(seq, "Status ring\n");
+ for (idx = hw->st_idx; idx != last && idx < STATUS_RING_SIZE;
+ idx = RING_NEXT(idx, STATUS_RING_SIZE)) {
+ const struct sky2_status_le *le = hw->st_le + idx;
+ seq_printf(seq, "[%d] %#x %d %#x\n",
+ idx, le->opcode, le->length, le->status);
+ }
+ seq_puts(seq, "\n");
+ }
+
+ seq_printf(seq, "Tx ring pending=%u...%u report=%d done=%d\n",
+ sky2->tx_cons, sky2->tx_prod,
+ sky2_read16(hw, port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
+ sky2_read16(hw, Q_ADDR(txqaddr[port], Q_DONE)));
+
+ /* Dump contents of tx ring */
+ sop = 1;
+ for (idx = sky2->tx_next; idx != sky2->tx_prod && idx < TX_RING_SIZE;
+ idx = RING_NEXT(idx, TX_RING_SIZE)) {
+ const struct sky2_tx_le *le = sky2->tx_le + idx;
+ u32 a = le32_to_cpu(le->addr);
+
+ if (sop)
+ seq_printf(seq, "%u:", idx);
+ sop = 0;
+
+ switch(le->opcode & ~HW_OWNER) {
+ case OP_ADDR64:
+ seq_printf(seq, " %#x:", a);
+ break;
+ case OP_LRGLEN:
+ seq_printf(seq, " mtu=%d", a);
+ break;
+ case OP_VLAN:
+ seq_printf(seq, " vlan=%d", be16_to_cpu(le->length));
+ break;
+ case OP_TCPLISW:
+ seq_printf(seq, " csum=%#x", a);
+ break;
+ case OP_LARGESEND:
+ seq_printf(seq, " tso=%#x(%d)", a, le16_to_cpu(le->length));
+ break;
+ case OP_PACKET:
+ seq_printf(seq, " %#x(%d)", a, le16_to_cpu(le->length));
+ break;
+ case OP_BUFFER:
+ seq_printf(seq, " frag=%#x(%d)", a, le16_to_cpu(le->length));
+ break;
+ default:
+ seq_printf(seq, " op=%#x,%#x(%d)", le->opcode,
+ a, le16_to_cpu(le->length));
+ }
+
+ if (le->ctrl & EOP) {
+ seq_putc(seq, '\n');
+ sop = 1;
+ }
+ }
+
+ seq_printf(seq, "\nRx ring hw get=%d put=%d last=%d\n",
+ sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_GET_IDX)),
+ last = sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_PUT_IDX)),
+ sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_LAST_IDX)));
+
+ netif_poll_enable(hw->dev[0]);
+ return 0;
+}
+
+static int sky2_debug_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, sky2_debug_show, inode->i_private);
+}
+
+static const struct file_operations sky2_debug_fops = {
+ .owner = THIS_MODULE,
+ .open = sky2_debug_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+/*
+ * Use network device events to create/remove/rename
+ * debugfs file entries
+ */
+static int sky2_device_event(struct notifier_block *unused,
+ unsigned long event, void *ptr)
+{
+ struct net_device *dev = ptr;
+
+ if (dev->open == sky2_up) {
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ switch(event) {
+ case NETDEV_CHANGENAME:
+ if (!netif_running(dev))
+ break;
+ /* fallthrough */
+ case NETDEV_DOWN:
+ case NETDEV_GOING_DOWN:
+ if (sky2->debugfs) {
+ printk(KERN_DEBUG PFX "%s: remove debugfs\n",
+ dev->name);
+ debugfs_remove(sky2->debugfs);
+ sky2->debugfs = NULL;
+ }
+
+ if (event != NETDEV_CHANGENAME)
+ break;
+ /* fallthrough for changename */
+ case NETDEV_UP:
+ if (sky2_debug) {
+ struct dentry *d;
+ d = debugfs_create_file(dev->name, S_IRUGO,
+ sky2_debug, dev,
+ &sky2_debug_fops);
+ if (d == NULL || IS_ERR(d))
+ printk(KERN_INFO PFX
+ "%s: debugfs create failed\n",
+ dev->name);
+ else
+ sky2->debugfs = d;
+ }
+ break;
+ }
+ }
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block sky2_notifier = {
+ .notifier_call = sky2_device_event,
+};
+
+
+static __init void sky2_debug_init(void)
+{
+ struct dentry *ent;
+
+ ent = debugfs_create_dir("sky2", NULL);
+ if (!ent || IS_ERR(ent))
+ return;
+
+ sky2_debug = ent;
+ register_netdevice_notifier(&sky2_notifier);
+}
+
+static __exit void sky2_debug_cleanup(void)
+{
+ if (sky2_debug) {
+ unregister_netdevice_notifier(&sky2_notifier);
+ debugfs_remove(sky2_debug);
+ sky2_debug = NULL;
+ }
+}
+
+#else
+#define sky2_debug_init()
+#define sky2_debug_cleanup()
+#endif
+
+
/* Initialize network device */
static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
unsigned port,
@@ -3536,10 +3813,6 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
- /* device is off until link detection */
- netif_carrier_off(dev);
- netif_stop_queue(dev);
-
return dev;
}
@@ -3956,12 +4229,14 @@ static struct pci_driver sky2_driver = {
static int __init sky2_init_module(void)
{
+ sky2_debug_init();
return pci_register_driver(&sky2_driver);
}
static void __exit sky2_cleanup_module(void)
{
pci_unregister_driver(&sky2_driver);
+ sky2_debug_cleanup();
}
module_init(sky2_init_module);
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 8df4643..dce4d27 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -1998,6 +1998,7 @@ struct sky2_port {
struct sky2_tx_le *tx_le;
u16 tx_cons; /* next le to check */
u16 tx_prod; /* next le to use */
+ u16 tx_next; /* debug only */
u32 tx_addr64;
u16 tx_pending;
u16 tx_last_mss;
@@ -2028,6 +2029,9 @@ struct sky2_port {
enum flow_control flow_mode;
enum flow_control flow_status;
+#ifdef CONFIG_SKY2_DEBUG
+ struct dentry *debugfs;
+#endif
struct net_device_stats net_stats;
};
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index f5abb52..590b12c 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -1441,11 +1441,17 @@ static void
spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg)
{
u32 error_reg1, error_reg2;
+ u32 mask_reg1, mask_reg2;
u32 i;
int show_error = 1;
error_reg1 = spider_net_read_reg(card, SPIDER_NET_GHIINT1STS);
error_reg2 = spider_net_read_reg(card, SPIDER_NET_GHIINT2STS);
+ mask_reg1 = spider_net_read_reg(card, SPIDER_NET_GHIINT1MSK);
+ mask_reg2 = spider_net_read_reg(card,SPIDER_NET_GHIINT2MSK);
+
+ error_reg1 &= mask_reg1;
+ error_reg2 &= mask_reg2;
/* check GHIINT0STS ************************************/
if (status_reg)
@@ -1673,9 +1679,11 @@ spider_net_interrupt(int irq, void *ptr)
{
struct net_device *netdev = ptr;
struct spider_net_card *card = netdev_priv(netdev);
- u32 status_reg;
+ u32 status_reg, mask_reg;
status_reg = spider_net_read_reg(card, SPIDER_NET_GHIINT0STS);
+ mask_reg = spider_net_read_reg(card, SPIDER_NET_GHIINT0MSK);
+ status_reg &= mask_reg;
if (!status_reg)
return IRQ_NONE;
@@ -1717,6 +1725,38 @@ spider_net_poll_controller(struct net_device *netdev)
#endif /* CONFIG_NET_POLL_CONTROLLER */
/**
+ * spider_net_enable_interrupts - enable interrupts
+ * @card: card structure
+ *
+ * spider_net_enable_interrupt enables several interrupts
+ */
+static void
+spider_net_enable_interrupts(struct spider_net_card *card)
+{
+ spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK,
+ SPIDER_NET_INT0_MASK_VALUE);
+ spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK,
+ SPIDER_NET_INT1_MASK_VALUE);
+ spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK,
+ SPIDER_NET_INT2_MASK_VALUE);
+}
+
+/**
+ * spider_net_disable_interrupts - disable interrupts
+ * @card: card structure
+ *
+ * spider_net_disable_interrupts disables all the interrupts
+ */
+static void
+spider_net_disable_interrupts(struct spider_net_card *card)
+{
+ spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, 0);
+ spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK, 0);
+ spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK, 0);
+ spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0);
+}
+
+/**
* spider_net_init_card - initializes the card
* @card: card structure
*
@@ -1736,6 +1776,7 @@ spider_net_init_card(struct spider_net_card *card)
spider_net_write_reg(card, SPIDER_NET_GMACOPEMD,
spider_net_read_reg(card, SPIDER_NET_GMACOPEMD) | 0x4);
+ spider_net_disable_interrupts(card);
}
/**
@@ -1823,14 +1864,6 @@ spider_net_enable_card(struct spider_net_card *card)
spider_net_write_reg(card, SPIDER_NET_GMACOPEMD,
SPIDER_NET_OPMODE_VALUE);
- /* set interrupt mask registers */
- spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK,
- SPIDER_NET_INT0_MASK_VALUE);
- spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK,
- SPIDER_NET_INT1_MASK_VALUE);
- spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK,
- SPIDER_NET_INT2_MASK_VALUE);
-
spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
SPIDER_NET_GDTBSTA);
}
@@ -2007,6 +2040,8 @@ spider_net_open(struct net_device *netdev)
netif_carrier_on(netdev);
netif_poll_enable(netdev);
+ spider_net_enable_interrupts(card);
+
return 0;
register_int_failed:
@@ -2179,11 +2214,7 @@ spider_net_stop(struct net_device *netdev)
del_timer_sync(&card->tx_timer);
del_timer_sync(&card->aneg_timer);
- /* disable/mask all interrupts */
- spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, 0);
- spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK, 0);
- spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK, 0);
- spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0);
+ spider_net_disable_interrupts(card);
free_irq(netdev->irq, netdev);
diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c
index 51c3fe2..15146a1 100644
--- a/drivers/net/sunhme.c
+++ b/drivers/net/sunhme.c
@@ -2625,7 +2625,7 @@ static void quattro_sbus_free_irqs(void)
#endif /* CONFIG_SBUS */
#ifdef CONFIG_PCI
-static struct quattro * __init quattro_pci_find(struct pci_dev *pdev)
+static struct quattro * __devinit quattro_pci_find(struct pci_dev *pdev)
{
struct pci_dev *bdev = pdev->bus->self;
struct quattro *qp;
diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
index e22a3f5..9f1b6ab 100644
--- a/drivers/net/tokenring/3c359.c
+++ b/drivers/net/tokenring/3c359.c
@@ -363,7 +363,7 @@ static int __devinit xl_probe(struct pci_dev *pdev,
}
-static int __init xl_init(struct net_device *dev)
+static int __devinit xl_init(struct net_device *dev)
{
struct xl_private *xl_priv = (struct xl_private *)dev->priv ;
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 18b731b..e4736a3 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -2276,7 +2276,7 @@ static void ucc_geth_stop(struct ucc_geth_private *ugeth)
phy_stop(phydev);
/* Mask all interrupts */
- out_be32(ugeth->uccf->p_ucce, 0x00000000);
+ out_be32(ugeth->uccf->p_uccm, 0x00000000);
/* Clear all interrupts */
out_be32(ugeth->uccf->p_ucce, 0xffffffff);
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 86b6908..37bf4f2 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1213,7 +1213,7 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
status = 0;
}
- if (status == 0 && dev->status)
+ if (status >= 0 && dev->status)
status = init_status (dev, udev);
if (status < 0)
goto out3;
diff --git a/include/net/ax88796.h b/include/net/ax88796.h
new file mode 100644
index 0000000..ee786a0
--- /dev/null
+++ b/include/net/ax88796.h
@@ -0,0 +1,27 @@
+/* include/net/ax88796.h
+ *
+ * Copyright 2005 Simtec Electronics
+ * Ben Dooks <ben@...tec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#ifndef __NET_AX88796_PLAT_H
+#define __NET_AX88796_PLAT_H
+
+#define AXFLG_HAS_EEPROM (1<<0)
+#define AXFLG_MAC_FROMDEV (1<<1) /* device already has MAC */
+
+struct ax_plat_data {
+ unsigned int flags;
+ unsigned char wordlength; /* 1 or 2 */
+ unsigned char dcr_val; /* default value for DCR */
+ unsigned char rcr_val; /* default value for RCR */
+ unsigned char gpoc_val; /* default value for GPOC */
+ u32 *reg_offsets; /* register offsets */
+};
+
+#endif /* __NET_AX88796_PLAT_H */
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index f96ed76..79b79f3 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -2268,6 +2268,9 @@ static int addrconf_notify(struct notifier_block *this, unsigned long event,
break;
case NETDEV_UP:
case NETDEV_CHANGE:
+ if (dev->flags & IFF_SLAVE)
+ break;
+
if (event == NETDEV_UP) {
if (!netif_carrier_ok(dev)) {
/* device is not ready yet. */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists