linux-kernel - Re: [PATCH 2/2] Introduce CONFIG

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Mon, 30 Jul 2007 23:26:08 +0200
From:	Pavel Machek <pavel@....cz>
To:	"Rafael J. Wysocki" <rjw@...k.pl>
Cc:	Richard Hughes <hughsient@...il.com>, Adrian Bunk <bunk@...sta.de>,
	Linus Torvalds <torvalds@...ux-foundation.org>,
	Len Brown <lenb@...nel.org>, david@...g.hm,
	Andrew Morton <akpm@...ux-foundation.org>,
	linux-acpi@...r.kernel.org, linux-kernel@...r.kernel.org,
	Stefan Richter <stefanr@...6.in-berlin.de>,
	Nigel Cunningham <nigel@...el.suspend2.net>,
	pm list <linux-pm@...ts.linux-foundation.org>
Subject: Re: [PATCH 2/2] Introduce CONFIG_SUSPEND

Hi!

> > > > > Not only.  This also includes "standby".
> > > > 
> > > > Whatever it includes - please tell it to the user in the prompt.
> > > > 
> > > > Technical issues are important, but it's often forgotten how many 
> > > > problems people run into because the description of a kconfig option 
> > > > could have been better.
> > > 
> > > Sure.  Please see the updated patch I've just sent. :-)
> > 
> > So are you guys using:
> > 
> > "standby" = idle state, ~0.5 seconds
> > "suspend" = sleep to ram, ~10 seconds
> > "hibernate" = sleep to disk, ~30 seconds
> 
> Something like this, but "suspend" is not reserved as a name of specific state.
> 
> The second state is usually referred to as "suspend to RAM" or "STR" and is
> denoted by "mem" in /sys/power/state, if implemented.  Moreover, "standby" and
> "mem" are both entered using the same code path, so they may generally be
> referred to as "suspend" states.
> 
> The times aren't strictly defined for "mem" and "standby", too.  The general
> rule is that the times for "mem" are greater then for "standby" and the power
> drawn in "mem" is smaller than the power drawn in "standby", but the exact
> values will always depend on the platform.  Apart from this, if the platform
> supports only one "suspend" state, it decides if that's "mem" or "standby".
> 
> On ACPI systems "standby" and "mem" correspond to the S1 and S3 sleep states,
> respectively.

And I'd expect ~2seconds for both "standby" and "mem" on ACPI
system. ACPI S1 is just "for windows ME compatibility, do not use" --
it draws too much power, and is not really faster.
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/