| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <46CD692D.3070508@aj.net-lab.net> Date: Thu, 23 Aug 2007 13:02:05 +0200 From: Andreas John <lists@...net-lab.net> To: Linux Kernel Mailing List <linux-kernel@...r.kernel.org> CC: Conke Hu <conke.hu@...il.com>, Tejun Heo <htejun@...il.com> Subject: Re: [PATCH] ahci.c: fix ati sb600 sata IRQ_TF_ERR Hi, as requested by Tejun here comes dmesg and lspci -nn. Additionally I found something dmesg (See 1.), probably caused by the low-level error. Best Regards, Andreas 1.) [81739.060000] sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK [81739.060000] end_request: I/O error, dev sdb, sector 0 2.) lspci -nn root@...john-host:~# lspci -nn 00:00.0 Host bridge [0600]: ATI Technologies Inc Unknown device [1002:7910] 00:01.0 PCI bridge [0604]: ATI Technologies Inc Unknown device [1002:7912] 00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] 00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] 00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] 00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] 00:14.0 SMBus [0c05]: ATI Technologies Inc SB600 SMBus [1002:4385] (rev 14) 00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] 00:14.2 Audio device [0403]: ATI Technologies Inc SB600 Azalia [1002:4383] 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d] 00:14.4 PCI bridge [0604]: ATI Technologies Inc SB600 PCI to PCI Bridge [1002:4384] 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc Unknown device [1002:791e] 02:0f.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169SC Gigabit Ethernet [10ec:8167] (rev 10) 3.) A "fresh" dmesg root@...john-host:~# dmesg [ 0.000000] Linux version 2.6.22-9-server (buildd@...mer) (gcc version 4.1.3 20070718 (prerelease) (Ubuntu 4.1.2-14ubuntu1)) #1 SMP Fri Aug 3 01:19:51 GMT 2007 (Ubuntu 2.6.22-9.25-server) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007dee0000 (usable) [ 0.000000] BIOS-e820: 000000007dee0000 - 000000007dee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007dee3000 - 000000007def0000 (ACPI data) [ 0.000000] BIOS-e820: 000000007def0000 - 000000007df00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 1118MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f4fa0 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] Entering add_active_range(0, 0, 515808) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 515808 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 515808 [ 0.000000] On node 0 totalpages: 515808 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2237 pages used for memmap [ 0.000000] HighMem zone: 284195 pages, LIFO batch:31 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000F6940, 0014 (r0 GBT ) [ 0.000000] ACPI: RSDT 7DEE3000, 0034 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: FACP 7DEE3040, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: DSDT 7DEE30C0, 39B1 (r1 GBT AWRDACPI 1000 MSFT 100000C) [ 0.000000] ACPI: FACS 7DEE0000, 0040 [ 0.000000] ACPI: SSDT 7DEE6B00, 01C4 (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000000] ACPI: MCFG 7DEE6D00, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: APIC 7DEE6A80, 0068 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:11 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:11 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7df00000:62100000) [ 0.000000] Built 1 zonelists. Total pages: 511779 [ 0.000000] Kernel command line: root=/dev/md0 ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2000.252 MHz processor. [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 2033820k/2063232k available (2041k kernel code, 28080k reserved, 922k data, 368k init, 1145728k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf8800000 - 0xffbfe000 ( 115 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.000000] .init : 0xc03eb000 - 0xc0447000 ( 368 kB) [ 0.000000] .data : 0xc02fe6d6 - 0xc03e4ee4 ( 922 kB) [ 0.000000] .text : 0xc0100000 - 0xc02fe6d6 (2041 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 0.000000] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 0.160000] Calibrating delay using timer specific routine.. 4002.62 BogoMIPS (lpj=20013136) [ 0.160000] Security Framework v1.0.0 initialized [ 0.160000] SELinux: Disabled at boot. [ 0.160000] Mount-cache hash table entries: 512 [ 0.160000] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f [ 0.160000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.160000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.160000] CPU 0(2) -> Core 0 [ 0.160000] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f [ 0.160000] Compat vDSO mapped to ffffe000. [ 0.160000] Checking 'hlt' instruction... OK. [ 0.200000] SMP alternatives: switching to UP code [ 0.200000] Early unpacking initramfs... done [ 0.470000] ACPI: Core revision 20070126 [ 0.470000] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 0.480000] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 0.480000] SMP alternatives: switching to SMP code [ 0.480000] Booting processor 1/1 eip 3000 [ 0.490000] Initializing CPU#1 [ 0.640000] Calibrating delay using timer specific routine.. 4000.22 BogoMIPS (lpj=20001140) [ 0.640000] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f [ 0.640000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.640000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.640000] CPU 1(2) -> Core 1 [ 0.640000] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f [ 0.640000] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 0.640000] Total of 2 processors activated (8002.85 BogoMIPS). [ 0.640000] ENABLING IO-APIC IRQs [ 0.640000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.740000] Brought up 2 CPUs [ 0.770000] migration_cost=10000 [ 0.770000] Booting paravirtualized kernel on bare hardware [ 0.770000] Time: 10:58:47 Date: 07/23/107 [ 0.770000] NET: Registered protocol family 16 [ 0.770000] EISA bus registered [ 0.770000] ACPI: bus type pci registered [ 0.880000] PCI: PCI BIOS revision 3.00 entry at 0xfb490, last bus=2 [ 0.880000] PCI: Using configuration type 1 [ 0.880000] Setting up standard PCI resources [ 0.880000] ACPI: EC: Look up EC in DSDT [ 0.890000] ACPI: Interpreter enabled [ 0.890000] ACPI: (supports S0 S1 S4 S5) [ 0.890000] ACPI: Using IOAPIC for interrupt routing [ 0.890000] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.890000] PCI: Probing PCI hardware (bus 00) [ 0.890000] PCI: Transparent bridge - 0000:00:14.4 [ 0.890000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.890000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.890000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.900000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.900000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.910000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.910000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.910000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.910000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.910000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.910000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.910000] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.910000] pnp: PnP ACPI init [ 0.910000] ACPI: bus type pnp registered [ 0.910000] pnp: PnP ACPI: found 13 devices [ 0.910000] ACPI: ACPI bus type pnp unregistered [ 0.910000] PnPBIOS: Disabled by ACPI PNP [ 0.910000] PCI: Using ACPI for IRQ routing [ 0.910000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.950000] NET: Registered protocol family 8 [ 0.950000] NET: Registered protocol family 20 [ 0.950000] NetLabel: Initializing [ 0.950000] NetLabel: domain hash size = 128 [ 0.950000] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.950000] NetLabel: unlabeled traffic allowed by default [ 0.950000] pnp: 00:01: ioport range 0x4100-0x411f has been reserved [ 0.950000] pnp: 00:01: ioport range 0x228-0x22f has been reserved [ 0.950000] pnp: 00:01: ioport range 0x40b-0x40b has been reserved [ 0.950000] pnp: 00:01: ioport range 0x4d6-0x4d6 has been reserved [ 0.950000] pnp: 00:01: ioport range 0xc00-0xc01 has been reserved [ 0.950000] pnp: 00:01: ioport range 0xc14-0xc14 has been reserved [ 0.950000] pnp: 00:01: ioport range 0xc50-0xc52 has been reserved [ 0.950000] pnp: 00:01: ioport range 0xc6c-0xc6d has been reserved [ 0.950000] pnp: 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved [ 0.950000] pnp: 00:0c: iomem range 0xd1000-0xd3fff has been reserved [ 0.950000] pnp: 00:0c: iomem range 0xf0000-0xf7fff could not be reserved [ 0.950000] pnp: 00:0c: iomem range 0xf8000-0xfbfff could not be reserved [ 0.950000] pnp: 00:0c: iomem range 0xfc000-0xfffff could not be reserved [ 0.980000] PCI: Bridge: 0000:00:01.0 [ 0.980000] IO window: e000-efff [ 0.980000] MEM window: fde00000-fdffffff [ 0.980000] PREFETCH window: fa000000-fbffffff [ 0.980000] PCI: Bridge: 0000:00:14.4 [ 0.980000] IO window: d000-dfff [ 0.980000] MEM window: fdd00000-fddfffff [ 0.980000] PREFETCH window: fdc00000-fdcfffff [ 0.980000] NET: Registered protocol family 2 [ 0.990000] Time: acpi_pm clocksource has been installed. [ 0.990000] Switched to high resolution mode on CPU 0 [ 0.990000] Switched to high resolution mode on CPU 1 [ 1.080000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.080000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 1.080000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 1.080000] TCP: Hash tables configured (established 131072 bind 65536) [ 1.080000] TCP reno registered [ 1.120000] checking if image is initramfs... it is [ 1.660000] Freeing initrd memory: 7173k freed [ 1.660000] audit: initializing netlink socket (disabled) [ 1.660000] audit(1187866727.490:1): initialized [ 1.660000] highmem bounce pool size: 64 pages [ 1.660000] VFS: Disk quotas dquot_6.5.1 [ 1.660000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.660000] io scheduler noop registered [ 1.660000] io scheduler anticipatory registered [ 1.660000] io scheduler deadline registered (default) [ 1.660000] io scheduler cfq registered [ 1.820000] Boot video device is 0000:01:05.0 [ 1.820000] isapnp: Scanning for PnP cards... [ 2.170000] isapnp: No Plug & Play device found [ 2.190000] Real Time Clock Driver v1.12ac [ 2.190000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 2.190000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.190000] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.190000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 2.190000] input: Macintosh mouse button emulation as /class/input/input0 [ 2.190000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 2.190000] PNP: PS/2 controller doesn't have AUX irq; using default 12 [ 2.200000] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.200000] mice: PS/2 mouse device common for all mice [ 2.200000] EISA: Probing bus 0 at eisa.0 [ 2.200000] Cannot allocate resource for EISA slot 4 [ 2.200000] EISA: Detected 0 cards. [ 2.200000] TCP cubic registered [ 2.200000] NET: Registered protocol family 1 [ 2.200000] Using IPI No-Shortcut mode [ 2.200000] Magic number: 3:243:983 [ 2.200000] Freeing unused kernel memory: 368k freed [ 2.240000] input: AT Translated Set 2 keyboard as /class/input/input1 [ 2.360000] AppArmor: AppArmor initialized [ 2.360000] audit(1187866727.990:2): AppArmor initialized [ 2.360000] [ 2.360000] AppArmor: Registered secondary security module: capability. [ 2.360000] Capability LSM initialized as secondary [ 2.380000] md: linear personality registered for level -1 [ 2.390000] md: multipath personality registered for level -4 [ 2.390000] md: raid0 personality registered for level 0 [ 2.390000] md: raid1 personality registered for level 1 [ 2.400000] raid5: automatically using best checksumming function: pIII_sse [ 2.450000] pIII_sse : 6094.400 MB/sec [ 2.450000] raid5: using function: pIII_sse (6094.400 MB/sec) [ 2.620000] raid6: int32x1 853 MB/s [ 2.790000] raid6: int32x2 869 MB/s [ 2.960000] raid6: int32x4 732 MB/s [ 3.130000] raid6: int32x8 525 MB/s [ 3.300000] raid6: mmxx1 1615 MB/s [ 3.470000] raid6: mmxx2 2973 MB/s [ 3.640000] raid6: sse1x1 1608 MB/s [ 3.810000] raid6: sse1x2 2689 MB/s [ 3.980000] raid6: sse2x1 2705 MB/s [ 4.150000] raid6: sse2x2 3714 MB/s [ 4.150000] raid6: using algorithm sse2x2 (3714 MB/s) [ 4.150000] md: raid6 personality registered for level 6 [ 4.150000] md: raid5 personality registered for level 5 [ 4.150000] md: raid4 personality registered for level 4 [ 4.170000] md: raid10 personality registered for level 10 [ 4.650000] SCSI subsystem initialized [ 4.660000] libata version 2.21 loaded. [ 4.660000] ahci 0000:00:12.0: version 2.2 [ 4.660000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 16 [ 4.660000] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 4.660000] usbcore: registered new interface driver usbfs [ 4.660000] usbcore: registered new interface driver hub [ 4.660000] usbcore: registered new device driver usb [ 4.660000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.670000] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 5.670000] ahci 0000:00:12.0: flags: ncq ilck pm led clo pmp pio slum part [ 5.670000] scsi0 : ahci [ 5.670000] scsi1 : ahci [ 5.670000] scsi2 : ahci [ 5.670000] scsi3 : ahci [ 5.670000] ata1: SATA max UDMA/133 cmd 0xf885a100 ctl 0x00000000 bmdma 0x00000000 irq 16 [ 5.670000] ata2: SATA max UDMA/133 cmd 0xf885a180 ctl 0x00000000 bmdma 0x00000000 irq 16 [ 5.670000] ata3: SATA max UDMA/133 cmd 0xf885a200 ctl 0x00000000 bmdma 0x00000000 irq 16 [ 5.670000] ata4: SATA max UDMA/133 cmd 0xf885a280 ctl 0x00000000 bmdma 0x00000000 irq 16 [ 6.200000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6.200000] ata1.00: Host Protected Area detected: [ 6.200000] current size: 781420655 sectors [ 6.200000] native size: 781422768 sectors [ 6.200000] ata1.00: ATA-7: SAMSUNG HD401LJ, ZZ100-15, max UDMA7 [ 6.200000] ata1.00: 781420655 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 6.200000] ata1.00: Host Protected Area detected: [ 6.200000] current size: 781420655 sectors [ 6.200000] native size: 781422768 sectors [ 6.200000] ata1.00: configured for UDMA/133 [ 6.730000] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6.730000] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x1) [ 7.750000] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 7.750000] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x1) [ 7.750000] ata2: limiting SATA link speed to 1.5 Gbps [ 7.750000] ata2.00: limiting speed to UDMA7:PIO5 [ 8.770000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 8.770000] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x1) [ 9.790000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 10.120000] ata3: SATA link down (SStatus 0 SControl 300) [ 10.450000] ata4: SATA link down (SStatus 0 SControl 300) [ 10.450000] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD401LJ ZZ10 PQ: 0 ANSI: 5 [ 10.450000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 10.450000] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 10.450000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 10.450000] ohci_hcd 0000:00:13.0: irq 17, io mem 0xfe02e000 [ 10.450000] sd 0:0:0:0: [sda] 781420655 512-byte hardware sectors (400087 MB) [ 10.450000] sd 0:0:0:0: [sda] Write Protect is off [ 10.450000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 10.450000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.450000] sd 0:0:0:0: [sda] 781420655 512-byte hardware sectors (400087 MB) [ 10.450000] sd 0:0:0:0: [sda] Write Protect is off [ 10.450000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 10.450000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.450000] sda: sda1 sda2 sda3 [ 10.470000] sd 0:0:0:0: [sda] Attached SCSI disk [ 10.470000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 10.510000] usb usb1: configuration #1 chosen from 1 choice [ 10.510000] hub 1-0:1.0: USB hub found [ 10.510000] hub 1-0:1.0: 2 ports detected [ 10.570000] md: md0 stopped. [ 10.620000] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 18 [ 10.620000] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 10.620000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 10.620000] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02d000 [ 10.630000] md: md1 stopped. [ 10.630000] md: bind<sda2> [ 10.640000] raid1: raid set md1 active with 1 out of 2 mirrors [ 10.640000] md: md2 stopped. [ 10.660000] md: md0 stopped. [ 10.660000] md: bind<sda1> [ 10.670000] raid1: raid set md0 active with 1 out of 2 mirrors [ 10.670000] md: md2 stopped. [ 10.680000] usb usb2: configuration #1 chosen from 1 choice [ 10.680000] hub 2-0:1.0: USB hub found [ 10.680000] hub 2-0:1.0: 2 ports detected [ 10.680000] md: bind<sda3> [ 10.690000] raid1: raid set md2 active with 1 out of 2 mirrors [ 10.720000] Attempting manual resume [ 10.720000] swsusp: Resume From Partition 9:1 [ 10.720000] PM: Checking swsusp image. [ 10.720000] PM: Resume from disk failed. [ 10.740000] kjournald starting. Commit interval 5 seconds [ 10.740000] EXT3-fs: mounted filesystem with ordered data mode. [ 10.790000] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 19 [ 10.790000] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 10.790000] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 10.790000] ohci_hcd 0000:00:13.2: irq 19, io mem 0xfe02c000 [ 10.850000] usb usb3: configuration #1 chosen from 1 choice [ 10.850000] hub 3-0:1.0: USB hub found [ 10.850000] hub 3-0:1.0: 2 ports detected [ 10.960000] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 18 [ 10.960000] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 10.960000] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4 [ 10.960000] ohci_hcd 0000:00:13.3: irq 18, io mem 0xfe02b000 [ 11.020000] usb usb4: configuration #1 chosen from 1 choice [ 11.020000] hub 4-0:1.0: USB hub found [ 11.020000] hub 4-0:1.0: 2 ports detected [ 11.130000] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 19 [ 11.130000] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 11.130000] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5 [ 11.130000] ohci_hcd 0000:00:13.4: irq 19, io mem 0xfe02a000 [ 11.190000] usb usb5: configuration #1 chosen from 1 choice [ 11.190000] hub 5-0:1.0: USB hub found [ 11.190000] hub 5-0:1.0: 2 ports detected [ 11.300000] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 20 [ 11.300000] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 11.300000] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6 [ 11.300000] ehci_hcd 0000:00:13.5: debug port 1 [ 11.300000] ehci_hcd 0000:00:13.5: irq 20, io mem 0xfe029000 [ 11.300000] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 11.300000] usb usb6: configuration #1 chosen from 1 choice [ 11.300000] hub 6-0:1.0: USB hub found [ 11.300000] hub 6-0:1.0: 10 ports detected [ 11.410000] r8169 Gigabit Ethernet driver 2.2LK loaded [ 11.410000] ACPI: PCI Interrupt 0000:02:0f.0[A] -> GSI 23 (level, low) -> IRQ 21 [ 11.410000] eth0: RTL8169sc/8110sc at 0xf885e000, 00:1a:4d:73:3b:c7, IRQ 21 [ 12.430000] r8169: eth0: link down [ 13.420000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 13.440000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 13.530000] input: PC Speaker as /class/input/input2 [ 13.570000] Linux agpgart interface v0.102 (c) Dave Jones [ 13.770000] parport_pc 00:09: reported by Plug and Play ACPI [ 13.770000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 13.860000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 13.860000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 13.880000] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 13.900000] SB600_PATA: IDE controller at PCI slot 0000:00:14.1 [ 13.900000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 17 [ 13.900000] SB600_PATA: chipset revision 0 [ 13.900000] SB600_PATA: not 100% native mode: will probe irqs later [ 13.900000] ide0: BM-DMA at 0xf900-0xf907, BIOS settings: hda:DMA, hdb:pio [ 13.900000] Probing IDE interface ide0... [ 13.990000] NET: Registered protocol family 17 [ 14.480000] r8169: eth0: link up [ 14.690000] hda: TSSTcorpDVD-ROM SH-D162C, ATAPI CD/DVD-ROM drive [ 15.410000] hda: selected mode 0x42 [ 15.410000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 15.430000] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 17 [ 15.470000] hda: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33) [ 15.470000] Uniform CD-ROM driver Revision: 3.20 [ 16.570000] lp0: using parport0 (interrupt-driven). [ 16.610000] fuse init (API version 7.8) [ 16.740000] Adding 1951800k swap on /dev/md1. Priority:-1 extents:1 across:1951800k [ 17.150000] EXT3 FS on md0, internal journal [ 17.670000] NET: Registered protocol family 10 [ 17.670000] lo: Disabled Privacy Extensions [ 17.790000] AppArmor: Unregistered secondary security module: capability [ 28.390000] eth0: no IPv6 routers present Andreas John schrieb: > Hm, > I should add that on 2.6.22-amd64 (ubuntu gutsy) the log entry is as > follows: > > ----8<------ > ata2.00 excetion Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 frozen > ata2.00 tag 0 cmd 0xea Emask 0x44 stat 0x40 err 0x0 timeout > 1st FIS failed > ----8<------ > > rgds, > Andreas - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists