Message-ID: <600D5CB4DFD93545BF61FF01473D11AC0F13ABFE@limkexm2.ad.analog.com>
Date:	Thu, 11 Oct 2007 20:18:04 +0100
From:	"Hennerich, Michael" <Michael.Hennerich@...log.com>
To:	"Dmitry Torokhov" <dmitry.torokhov@...il.com>,
	<bryan.wu@...log.com>
Cc:	"Michael Hennerich" <michael.hennerich@...log.com>,
	<linux-input@...ey.karlin.mff.cuni.cz>,
	"Linux Kernel" <linux-kernel@...r.kernel.org>,
	<uclinux-dist-devel@...ckfin.uclinux.org>
Subject: RE: [PATCH try #3] Blackfin BF54x Input Keypad controller driver

>From: Dmitry Torokhov [mailto:dmitry.torokhov@...il.com]
>Sent: Donnerstag, 11. Oktober 2007 19:27
>To: bryan.wu@...log.com
>Cc: Michael Hennerich; linux-input@...ey.karlin.mff.cuni.cz; Linux
Kernel;
>uclinux-dist-devel@...ckfin.uclinux.org
>Subject: Re: [PATCH try #3] Blackfin BF54x Input Keypad controller
driver
>
>On Thursday 11 October 2007, Bryan Wu wrote:
>> From: Michael Hennerich <michael.hennerich@...log.com>
>> Date: Fri, 12 Oct 2007 00:20:19 +0800
>> Subject: [PATCH] Blackfin BF54x Input Keypad controller driver
>>
>> [try #2] Changelog:
>>  - Coding style issue fixes
>>  - using a temp variable for bf54x_kpad->input
>>  - Other updates according to Dmitry's review
>>
>> [try #3] Changelog:
>>  - Coding style cleanups
>>  - Use local copy of keymap
>>  - Remove empty PM functions
>>  - Use input_set_drvdata() since input->private is going away
>
>
>This looks very good, thank youvery much. I have only 1 more suggestion
>(and I can make the changes locally, you don't need to resubmit) -
>since it is highly unlikely that we will have a keycode > 65535 do you
>think we could change keymap to unsigned short. It would save you a
>couple of bytes. I am also going to change "input->cdev.dev =
&pdev->dev;"
>to "input_dev->dev.parent = &pdev->dev;". Please let me know if you are
>OK with it.

Hi Dmitry,

Thanks for your excellent feedback and support.

We do a pretty similar thing like the omap keypad driver.
Our keycodes do not exceed KEY_MAX but we encode the ROW and COL into
the keycode matrix, in order simplify things in a "normal use case"? .
What we store is u32, 16-bit for the keycode and the upper for private
use. My understanding is that we then have to set input->keycodesize
also being u32.

Otherwise the generic input layer might get screwed up?!

Am I wrong here, or do I miss something?
Either this is a valid use case or I was inspired by a bad example.

Best regards,
Michael




>
>Thanks!
>
>
>>
>> Cc: Dmitry Torokhov <dmitry.torokhov@...il.com>
>> Signed-off-by: Michael Hennerich <michael.hennerich@...log.com>
>> Signed-off-by: Bryan Wu <bryan.wu@...log.com>
>> ---
>>  arch/blackfin/mach-bf548/boards/ezkit.c      |    2 +-
>>  drivers/input/keyboard/Kconfig               |    9 +
>>  drivers/input/keyboard/Makefile              |    2 +-
>>  drivers/input/keyboard/bf54x-keys.c          |  378
>++++++++++++++++++++++++++
>>  include/asm-blackfin/mach-bf548/bf54x_keys.h |   17 ++
>>  5 files changed, 406 insertions(+), 2 deletions(-)
>>  create mode 100644 drivers/input/keyboard/bf54x-keys.c
>>  create mode 100644 include/asm-blackfin/mach-bf548/bf54x_keys.h
>>
>> diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c
>b/arch/blackfin/mach-bf548/boards/ezkit.c
>> index 2c47db4..6734b3d 100644
>> --- a/arch/blackfin/mach-bf548/boards/ezkit.c
>> +++ b/arch/blackfin/mach-bf548/boards/ezkit.c
>> @@ -88,7 +88,7 @@ static struct platform_device bf54x_lq043_device =
{
>>  #endif
>>
>>  #if defined(CONFIG_KEYBOARD_BFIN) ||
>defined(CONFIG_KEYBOARD_BFIN_MODULE)
>> -static int bf548_keymap[] = {
>> +static unsigned int bf548_keymap[] = {
>>  	KEYVAL(0, 0, KEY_ENTER),
>>  	KEYVAL(0, 1, KEY_HELP),
>>  	KEYVAL(0, 2, KEY_0),
>> diff --git a/drivers/input/keyboard/Kconfig
>b/drivers/input/keyboard/Kconfig
>> index c97d5eb..2136a9e 100644
>> --- a/drivers/input/keyboard/Kconfig
>> +++ b/drivers/input/keyboard/Kconfig
>> @@ -253,4 +253,13 @@ config KEYBOARD_GPIO
>>  	  To compile this driver as a module, choose M here: the
>>  	  module will be called gpio-keys.
>>
>> +config KEYBOARD_BFIN
>> +	tristate "Blackfin BF54x keypad support"
>> +	depends on (BF54x)
>> +	help
>> +	  Say Y here if you want to use the BF54x keypad.
>> +
>> +	  To compile this driver as a module, choose M here: the
>> +	  module will be called bf54x-keypad.
>> +
>>  endif
>> diff --git a/drivers/input/keyboard/Makefile
>b/drivers/input/keyboard/Makefile
>> index 28d211b..3123277 100644
>> --- a/drivers/input/keyboard/Makefile
>> +++ b/drivers/input/keyboard/Makefile
>> @@ -21,4 +21,4 @@ obj-$(CONFIG_KEYBOARD_OMAP)		+=
omap-keypad.o
>>  obj-$(CONFIG_KEYBOARD_PXA27x)		+= pxa27x_keyboard.o
>>  obj-$(CONFIG_KEYBOARD_AAED2000)		+= aaed2000_kbd.o
>>  obj-$(CONFIG_KEYBOARD_GPIO)		+= gpio_keys.o
>> -
>> +obj-$(CONFIG_KEYBOARD_BFIN)		+= bf54x-keys.o
>> diff --git a/drivers/input/keyboard/bf54x-keys.c
>b/drivers/input/keyboard/bf54x-keys.c
>> new file mode 100644
>> index 0000000..2833c60
>> --- /dev/null
>> +++ b/drivers/input/keyboard/bf54x-keys.c
>> @@ -0,0 +1,378 @@
>> +/*
>> + * File:         drivers/input/keyboard/bf54x-keys.c
>> + * Based on:
>> + * Author:       Michael Hennerich <hennerich@...ckfin.uclinux.org>
>> + *
>> + * Created:
>> + * Description:  keypad driver for Analog Devices Blackfin BF54x
>Processors
>> + *
>> + *
>> + * Modified:
>> + *               Copyright 2007 Analog Devices Inc.
>> + *
>> + * Bugs:         Enter bugs at http://blackfin.uclinux.org/
>> + *
>> + * This program is free software; you can redistribute it and/or
modify
>> + * it under the terms of the GNU General Public License as published
by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, see the file COPYING, or write
>> + * to the Free Software Foundation, Inc.,
>> + * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/version.h>
>> +
>> +#include <linux/init.h>
>> +#include <linux/fs.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/irq.h>
>> +#include <linux/sched.h>
>> +#include <linux/pm.h>
>> +#include <linux/sysctl.h>
>> +#include <linux/proc_fs.h>
>> +#include <linux/delay.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/input.h>
>> +#include <linux/irq.h>
>> +
>> +#include <asm/portmux.h>
>> +#include <asm/mach/bf54x_keys.h>
>> +
>> +#define DRV_NAME 	"bf54x-keys"
>> +#define TIME_SCALE	100	/* 100 ns */
>> +#define	MAX_MULT	(0xFF * TIME_SCALE)
>> +#define MAX_RC		8	/* Max Row/Col */
>> +
>> +static const u16 per_rows[] = {
>> +	P_KEY_ROW7,
>> +	P_KEY_ROW6,
>> +	P_KEY_ROW5,
>> +	P_KEY_ROW4,
>> +	P_KEY_ROW3,
>> +	P_KEY_ROW2,
>> +	P_KEY_ROW1,
>> +	P_KEY_ROW0,
>> +	0
>> +};
>> +
>> +static const u16 per_cols[] = {
>> +	P_KEY_COL7,
>> +	P_KEY_COL6,
>> +	P_KEY_COL5,
>> +	P_KEY_COL4,
>> +	P_KEY_COL3,
>> +	P_KEY_COL2,
>> +	P_KEY_COL1,
>> +	P_KEY_COL0,
>> +	0
>> +};
>> +
>> +struct bf54x_kpad {
>> +	struct input_dev *input;
>> +	int irq;
>> +	int lastkey;
>> +	unsigned int *keycode;
>> +	struct timer_list timer;
>> +	unsigned int keyup_test_jiffies;
>> +};
>> +
>> +static inline int bfin_kpad_find_key(struct bf54x_kpad *bf54x_kpad,
>> +			 struct input_dev *input, u16 keyident)
>> +{
>> +	u16 i;
>> +
>> +	for (i = 0; i < input->keycodemax; i++)
>> +		if ((bf54x_kpad->keycode[i] >> 16) == keyident)
>> +			return bf54x_kpad->keycode[i] & 0xffff;
>> +	return -1;
>> +}
>> +
>> +
>> +static inline u16 bfin_kpad_get_prescale(u32 timescale)
>> +{
>> +	u32 sclk = get_sclk();
>> +
>> +	return ((((sclk / 1000) * timescale) / 1024) - 1);
>> +}
>> +
>> +static inline u16 bfin_kpad_get_keypressed(struct bf54x_kpad
>*bf54x_kpad)
>> +{
>> +	return (bfin_read_KPAD_STAT() & KPAD_PRESSED);
>> +}
>> +
>> +static inline void bfin_kpad_clear_irq(void)
>> +{
>> +	bfin_write_KPAD_STAT(0xFFFF);
>> +	bfin_write_KPAD_ROWCOL(0xFFFF);
>> +}
>> +
>> +static void bfin_kpad_timer(unsigned long data)
>> +{
>> +	struct platform_device *pdev =  (struct platform_device *) data;
>> +	struct bf54x_kpad *bf54x_kpad = platform_get_drvdata(pdev);
>> +
>> +	if (bfin_kpad_get_keypressed(bf54x_kpad)) {
>> +		/* Try again later */
>> +		mod_timer(&bf54x_kpad->timer, jiffies
>> +				+ bf54x_kpad->keyup_test_jiffies);
>> +		return;
>> +	}
>> +
>> +	input_report_key(bf54x_kpad->input, bf54x_kpad->lastkey, 0);
>> +	input_sync(bf54x_kpad->input);
>> +
>> +	/* Clear IRQ Status */
>> +
>> +	bfin_kpad_clear_irq();
>> +	enable_irq(bf54x_kpad->irq);
>> +}
>> +
>> +static irqreturn_t bfin_kpad_isr(int irq, void *dev_id)
>> +{
>> +	struct platform_device *pdev = dev_id;
>> +	struct bf54x_kpad *bf54x_kpad = platform_get_drvdata(pdev);
>> +	struct input_dev *input = bf54x_kpad->input;
>> +	int key;
>> +	u16 rowcol = bfin_read_KPAD_ROWCOL();
>> +
>> +	key = bfin_kpad_find_key(bf54x_kpad, input, rowcol);
>> +
>> +	input_report_key(input, key, 1);
>> +	input_sync(input);
>> +
>> +	if (bfin_kpad_get_keypressed(bf54x_kpad)) {
>> +		disable_irq(bf54x_kpad->irq);
>> +		bf54x_kpad->lastkey = key;
>> +		mod_timer(&bf54x_kpad->timer, jiffies
>> +				+ bf54x_kpad->keyup_test_jiffies);
>> +
>> +		return IRQ_HANDLED;
>> +	}
>> +
>> +	input_report_key(input, key, 0);
>> +	input_sync(input);
>> +
>> +	bfin_kpad_clear_irq();
>> +
>> +	return IRQ_HANDLED;
>> +}
>> +
>> +static int __devinit bfin_kpad_probe(struct platform_device *pdev)
>> +{
>> +	struct bf54x_kpad *bf54x_kpad;
>> +	struct bfin_kpad_platform_data *pdata = pdev->dev.platform_data;
>> +	struct input_dev *input;
>> +	int i, error;
>> +
>> +
>> +	if (!pdata->rows || !pdata->cols || !pdata->keymap) {
>> +		printk(KERN_ERR DRV_NAME"No rows, cols or keymap from
>pdata\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	if (!pdata->keymapsize || pdata->keymapsize > (pdata->rows *
pdata-
>>cols)) {
>> +		printk(KERN_ERR DRV_NAME"Invalid keymapsize\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	bf54x_kpad = kzalloc(sizeof(struct bf54x_kpad), GFP_KERNEL);
>> +
>> +	if (!bf54x_kpad)
>> +		return -ENOMEM;
>> +
>> +	platform_set_drvdata(pdev, bf54x_kpad);
>> +
>> +	bf54x_kpad->keycode = kmalloc(pdata->keymapsize *
sizeof(unsigned
>int), GFP_KERNEL);
>> +
>> +	if (!bf54x_kpad->keycode) {
>> +		error = -ENOMEM;
>> +		goto out;
>> +	}
>> +
>> +	if (!pdata->debounce_time || !pdata->debounce_time > MAX_MULT ||
>> +		!pdata->coldrive_time || !pdata->coldrive_time >
MAX_MULT) {
>> +		printk(KERN_ERR DRV_NAME
>> +			"Invalid Debounce/Columdrive Time from
pdata\n");
>> +		bfin_write_KPAD_MSEL(0xFF0);	/* Default MSEL	*/
>> +	} else {
>> +		bfin_write_KPAD_MSEL(((pdata->debounce_time /
TIME_SCALE)
>> +			 & DBON_SCALE) | (((pdata->coldrive_time /
TIME_SCALE) <<
>8)
>> +			  & COLDRV_SCALE));
>> +
>> +	}
>> +
>> +	if (!pdata->keyup_test_interval) {
>> +		bf54x_kpad->keyup_test_jiffies = msecs_to_jiffies(50);
>> +	} else {
>> +		bf54x_kpad->keyup_test_jiffies =
>> +			msecs_to_jiffies(pdata->keyup_test_interval);
>> +	}
>> +
>> +	if (peripheral_request_list((u16 *)&per_rows[MAX_RC -
pdata->rows],
>DRV_NAME)) {
>> +		printk(KERN_ERR DRV_NAME
>> +		": Requesting Peripherals failed\n");
>> +		error = -EFAULT;
>> +		goto out0;
>> +	}
>> +
>> +	if (peripheral_request_list((u16 *)&per_cols[MAX_RC -
pdata->cols],
>DRV_NAME)) {
>> +		printk(KERN_ERR DRV_NAME
>> +		": Requesting Peripherals failed\n");
>> +		error = -EFAULT;
>> +		goto out1;
>> +	}
>> +
>> +	bf54x_kpad->irq = platform_get_irq(pdev, 0);
>> +
>> +	if (bf54x_kpad->irq < 0) {
>> +		error = -ENODEV;
>> +		goto out2;
>> +	}
>> +
>> +	error = request_irq(bf54x_kpad->irq, bfin_kpad_isr,
>> +				 IRQF_SAMPLE_RANDOM, DRV_NAME, pdev);
>> +
>> +	if (error) {
>> +		printk(KERN_ERR DRV_NAME
>> +			": unable to claim irq %d; error %d\n",
>> +			bf54x_kpad->irq, error);
>> +		error = -EBUSY;
>> +		goto out2;
>> +	}
>> +
>> +	input = input_allocate_device();
>> +
>> +	if (!input) {
>> +		error = -ENOMEM;
>> +		goto out3;
>> +	}
>> +
>> +	bf54x_kpad->input = input;
>> +
>> +	input->name = pdev->name;
>> +	input->phys = "bf54x-keys/input0";
>> +	input->cdev.dev = &pdev->dev;
>> +
>> +	input_set_drvdata(input, bf54x_kpad);
>> +
>> +	input->id.bustype = BUS_HOST;
>> +	input->id.vendor = 0x0001;
>> +	input->id.product = 0x0001;
>> +	input->id.version = 0x0100;
>> +
>> +	input->keycodesize = sizeof(unsigned int);
>> +	input->keycodemax = pdata->keymapsize;
>> +
>> +	memcpy(bf54x_kpad->keycode, pdata->keymap, input->keycodesize *
>input->keycodemax);
>> +
>> +	input->keycode = bf54x_kpad->keycode;
>> +
>> +	/* setup input device */
>> +	__set_bit(EV_KEY, input->evbit);
>> +
>> +	if (pdata->repeat)
>> +		__set_bit(EV_REP, input->evbit);
>> +
>> +	for (i = 0; i < input->keycodemax; i++)
>> +		__set_bit(bf54x_kpad->keycode[i] & KEY_MAX,
input->keybit);
>> +
>> +	__clear_bit(KEY_RESERVED, input->keybit);
>> +
>> +	error = input_register_device(input);
>> +
>> +	if (error) {
>> +		printk(KERN_ERR DRV_NAME
>> +			": Unable to register input device (%d)\n",
error);
>> +		goto out4;
>> +	}
>> +
>> +	/* Init Keypad Key Up/Release test timer */
>> +
>> +	setup_timer(&bf54x_kpad->timer, bfin_kpad_timer, (unsigned long)
>pdev);
>> +
>> +	bfin_write_KPAD_PRESCALE(bfin_kpad_get_prescale(TIME_SCALE));
>> +
>> +	bfin_write_KPAD_CTL((((pdata->cols - 1) << 13) & KPAD_COLEN) |
>> +				(((pdata->rows - 1) << 10) & KPAD_ROWEN)
|
>> +				(2 & KPAD_IRQMODE));
>> +
>> +
>> +	bfin_write_KPAD_CTL(bfin_read_KPAD_CTL() | KPAD_EN);
>> +
>> +	printk(KERN_ERR DRV_NAME
>> +		": Blackfin BF54x Keypad registered IRQ %d\n",
bf54x_kpad-
>>irq);
>> +
>> +	return 0;
>> +
>> +
>> +out4:
>> +	input_free_device(input);
>> +out3:
>> +	free_irq(bf54x_kpad->irq, pdev);
>> +out2:
>> +	peripheral_free_list((u16 *)&per_cols[MAX_RC - pdata->cols]);
>> +out1:
>> +	peripheral_free_list((u16 *)&per_rows[MAX_RC - pdata->rows]);
>> +out0:
>> +	kfree(bf54x_kpad->keycode);
>> +out:
>> +	kfree(bf54x_kpad);
>> +	platform_set_drvdata(pdev, NULL);
>> +
>> +	return error;
>> +}
>> +
>> +static int __devexit bfin_kpad_remove(struct platform_device *pdev)
>> +{
>> +	struct bfin_kpad_platform_data *pdata = pdev->dev.platform_data;
>> +	struct bf54x_kpad *bf54x_kpad = platform_get_drvdata(pdev);
>> +
>> +
>> +	del_timer_sync(&bf54x_kpad->timer);
>> +	free_irq(bf54x_kpad->irq, pdev);
>> +
>> +	peripheral_free_list((u16 *)&per_rows[MAX_RC - pdata->rows]);
>> +	peripheral_free_list((u16 *)&per_cols[MAX_RC - pdata->cols]);
>> +
>> +	input_unregister_device(bf54x_kpad->input);
>> +
>> +	kfree(bf54x_kpad->keycode);
>> +	kfree(bf54x_kpad);
>> +	platform_set_drvdata(pdev, NULL);
>> +
>> +	return 0;
>> +}
>> +
>> +struct platform_driver bfin_kpad_device_driver = {
>> +	.probe		= bfin_kpad_probe,
>> +	.remove		= __devexit_p(bfin_kpad_remove),
>> +	.driver		= {
>> +		.name	= DRV_NAME,
>> +	}
>> +};
>> +
>> +static int __init bfin_kpad_init(void)
>> +{
>> +	return platform_driver_register(&bfin_kpad_device_driver);
>> +}
>> +
>> +static void __exit bfin_kpad_exit(void)
>> +{
>> +	platform_driver_unregister(&bfin_kpad_device_driver);
>> +}
>> +
>> +module_init(bfin_kpad_init);
>> +module_exit(bfin_kpad_exit);
>> +
>> +MODULE_LICENSE("GPL");
>> +MODULE_AUTHOR("Michael Hennerich <hennerich@...ckfin.uclinux.org>");
>> +MODULE_DESCRIPTION("Keypad driver for BF54x Processors");
>> diff --git a/include/asm-blackfin/mach-bf548/bf54x_keys.h
b/include/asm-
>blackfin/mach-bf548/bf54x_keys.h
>> new file mode 100644
>> index 0000000..8ab1f91
>> --- /dev/null
>> +++ b/include/asm-blackfin/mach-bf548/bf54x_keys.h
>> @@ -0,0 +1,17 @@
>> +#ifndef _BFIN_KPAD_H
>> +#define _BFIN_KPAD_H
>> +
>> +struct bfin_kpad_platform_data {
>> +	int rows;
>> +	int cols;
>> +	unsigned int *keymap;
>> +	unsigned short keymapsize;
>> +	unsigned short repeat;
>> +	u32 debounce_time;	/* in ns */
>> +	u32 coldrive_time;	/* in ns */
>> +	u32 keyup_test_interval; /* in ms */
>> +};
>> +
>> +#define KEYVAL(col, row, val) (((1 << col) << 24) | ((1 << row) <<
16) |
>(val))
>> +
>> +#endif
>
>--
>Dmitry
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists