linux-kernel - Re: [linux-pm] Re: [QUESTION] I need advice for writing .suspend/.resume functions

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-Id: <200710121247.31243.maximlevitsky@gmail.com>
Date:	Fri, 12 Oct 2007 12:47:31 +0200
From:	Maxim Levitsky <maximlevitsky@...il.com>
To:	Alan Stern <stern@...land.harvard.edu>
Cc:	"Rafael J. Wysocki" <rjw@...k.pl>,
	pm list <linux-pm@...ts.linux-foundation.org>,
	linux-kernel@...r.kernel.org
Subject: Re: [linux-pm] Re: [QUESTION] I need advice for writing .suspend/.resume functions

On Friday 12 October 2007 00:23:50 Alan Stern wrote:
> On Fri, 12 Oct 2007, Rafael J. Wysocki wrote:
> 
> > On Thursday, 11 October 2007 05:13, Maxim Levitsky wrote:
> > > Hi,
> > > 
> > > I have few questions about .suspend()/.resume() driver functions and how best to write them.
> > > 
> > > I have written a support for suspend/resume for saa7134 v4l driver.
> > > Now looking at code again and again, I found few problems, and I am seeking your advice how to fix them.
> > > 
> > > First of all the .suspend() function:
> > > 
> > > Looking at various drivers (including v4l ones) it seems that in general the function:
> > > 
> > > 1) tells upper layers that it is suspended
> > > 2) saves the state of device
> > > (generally there is nothing to save, since the driver maintains a copy of device state in memory)
> > > 
> > > 3) disables the device (including DMA)
> > > 4) does usual pci_save_state+pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state))
> > > (I am talking about pci devices of course)
> > > 
> > > But there is one problem that my .suspend() function have together with quite a lot of drivers:
> > > It can race with IRQ handler. Suppose the handler is called just before .suspend(), and thus .suspend() literally 
> > > pulls the hadware from that handler.
> > >
> > > I was told that I should use synchronize_irq(), and it looks exactly like the solution.
> > 
> > Yes, that seems to be the right solution.
> > 
> > > But I was surprised to see that very few drivers use it in their .suspend() routines.
> > 
> > Frankly, I'm not sure why that is so.
> 
> USB calls it.
> 
> > > Another issue, even bigger happens during the resume:
> > > Suppose the IRQ line is shared with some other device and it gets resumed first.
> > > And my IRQ handler is called because of the other device.
> > > Now my IRQ handler can't determine whenever the IRQ for the device, since the hardware is still powered off.
> > > 
> > > Probably I can fix the following issues doing this:
> > > 
> > > 1) do free_irq() in .suspend(), and request_irq() in .resume
> > > this solves both problems since free_irq()  calls synchronize_irq()
> > > Few drivers do that this way. I would like to know if this is the right way.
> > 
> > AFAICS, it is not and these drivers should probably be modified not to do so.
> > 
> > The problem, as I see it, is that we don't know what state the device will be
> > in during the resume (this may be a resume from disk and the device may have
> > been initialized by the BIOS and we get it actually generating interrupts).
> >  
> > > 2) Disable the card's IRQ register , then call synchronize_irq(), at that
> > > point I can be sure that no IRQ handler is running and will run then set some
> > > per device flag say dev->insuspend 
> > > 
> > > let IRQ handler check this flag, and bail out if set, so false interrupts are caught on resume
> > > Probably not a good idea, since I didn't find such implementation in kernel
> > 
> > I'm not sure of that.  Sounds better than freeing the IRQs in .suspend() to me.
> 
> USB uses 2).  Actually we set the "insuspend" flag after disabling IRQ
> generation but before calling synchronize_irq() -- presumably this
> doesn't lead to any problems.
> 
> The problem of devices initialized by the BIOS and generating unwanted 
> interrupts is handled by a PCI quirk routine.  The device's IRQ-enable 
> flag is turned off early on in the boot kernel.
> 
> Alan Stern
> 
> 

Thank you very much.
I will now implement (2) knowing that this is the right way.

Thanks again,
	Best regards,
		Maxim Levitsky
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/