Message-ID: <471D30C0.4050606@googlemail.com>
Date:	Tue, 23 Oct 2007 01:22:40 +0200
From:	Gabriel C <nix.or.die@...glemail.com>
To:	"Rafael J. Wysocki" <rjw@...k.pl>
CC:	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
	linux-pm@...ts.linux-foundation.org, linux-acpi@...r.kernel.org
Subject: Re: Resume problems

Rafael J. Wysocki wrote:
> On Tuesday, 23 October 2007 01:00, Gabriel C wrote:
>> Rafael J. Wysocki wrote:
>>> On Monday, 22 October 2007 18:15, Gabriel C wrote:
>>>> Hi all ,
>>>>
>>>> I'm running current git + aic7xxx suspend patch from  http://bugzilla.kernel.org/show_bug.cgi?id=3062
>>>> on a Dell Precision WorkStation 530 MT SMP box ( HT enabled ).
>>>>
>>>> Suspend works fine but on resume I have some problems. 
>>>> All CPU's but boot CPU won't come back , everything else seems fine.
>>> Can you please try to disable HT and suspend?
>> So only 'Hibernation' is enabled in kernel and HT disabled in BIOS ?
>>
>> If you mean that , sure I can try doing so. 
> 
> With suspend or hibernation enabled in the kernel, but with HT disabled in the
> BIOS.

Ok trying in some minutes.

> 
>> I also could disable Suspend to RAM completly from BIOS as well if you want.
> 
> No, that rather won't work.
> 
>>>> ...
>>>>
>>>> Oct 22 15:02:28 lara [   49.618795] Enabling non-boot CPUs ...
>>>> Oct 22 15:02:28 lara [   49.622211] PM: Adding info for No Bus:msr1
>>>> Oct 22 15:02:28 lara [   49.622259] PM: Adding info for No Bus:cpu1
>>>> Oct 22 15:02:28 lara [   49.622302] SMP alternatives: switching to SMP code
>>>> Oct 22 15:02:28 lara [   49.623536] Booting processor 1/1 eip 3000
>>>> Oct 22 15:02:28 lara [   54.638093] Not responding.
>>>> Oct 22 15:02:28 lara [   54.638096] Inquiring remote APIC #1...
>>>> Oct 22 15:02:28 lara [   54.638099] ... APIC #1 ID: failed
>>>> Oct 22 15:02:28 lara [   54.638204] ... APIC #1 VERSION: failed
>>>> Oct 22 15:02:28 lara [   54.638307] ... APIC #1 SPIV: failed
>>>> Oct 22 15:02:28 lara [   54.638427] skipping cpu1, didn't come online
>>>> Oct 22 15:02:28 lara [   54.638602] PM: Removing info for No Bus:msr1
>>>> Oct 22 15:02:28 lara [   54.638643] PM: Removing info for No Bus:cpu1
>>>> Oct 22 15:02:28 lara [   54.638678] Error taking CPU1 up: -5
>>>> Oct 22 15:02:28 lara [   54.640908] PM: Adding info for No Bus:msr2
>>>> Oct 22 15:02:28 lara [   54.640939] PM: Adding info for No Bus:cpu2
>>>> Oct 22 15:02:28 lara [   54.640976] SMP alternatives: switching to SMP code
>>>> Oct 22 15:02:28 lara [   54.641961] Booting processor 2/2 eip 3000
>>>> Oct 22 15:02:28 lara [   59.656795] Not responding.
>>>> Oct 22 15:02:28 lara [   59.656799] Inquiring remote APIC #2...
>>>> Oct 22 15:02:28 lara [   59.656803] ... APIC #2 ID: failed
>>>> Oct 22 15:02:28 lara [   59.656907] ... APIC #2 VERSION: failed
>>>> Oct 22 15:02:28 lara [   59.657011] ... APIC #2 SPIV: failed
>>>> Oct 22 15:02:28 lara [   59.657131] skipping cpu2, didn't come online
>>>> Oct 22 15:02:28 lara [   59.657300] PM: Removing info for No Bus:msr2
>>>> Oct 22 15:02:28 lara [   59.657343] PM: Removing info for No Bus:cpu2
>>>> Oct 22 15:02:28 lara [   59.657379] Error taking CPU2 up: -5
>>>> Oct 22 15:02:28 lara [   59.659605] PM: Adding info for No Bus:msr3
>>>> Oct 22 15:02:28 lara [   59.659637] PM: Adding info for No Bus:cpu3
>>>> Oct 22 15:02:28 lara [   59.659673] SMP alternatives: switching to SMP code
>>>> Oct 22 15:02:28 lara [   59.660725] Booting processor 3/3 eip 3000
>>>> Oct 22 15:02:28 lara [   64.675517] Not responding.
>>>> Oct 22 15:02:28 lara [   64.675520] Inquiring remote APIC #3...
>>>> Oct 22 15:02:28 lara [   64.675524] ... APIC #3 ID: failed
>>>> Oct 22 15:02:28 lara [   64.675628] ... APIC #3 VERSION: failed
>>>> Oct 22 15:02:28 lara [   64.675731] ... APIC #3 SPIV: failed
>>>> Oct 22 15:02:28 lara [   64.675859] skipping cpu3, didn't come online
>>>> Oct 22 15:02:28 lara [   64.676017] PM: Removing info for No Bus:msr3
>>>> Oct 22 15:02:28 lara [   64.676059] PM: Removing info for No Bus:cpu3
>>>> Oct 22 15:02:28 lara [   64.676092] Error taking CPU3 up: -5
>>>> Oct 22 15:02:28 lara [   64.676326] evxfevnt-0079 [00] enable                : System is already in ACPI mode
>>>>
>>>> ...
>>>>
>>>> After I've played with a lot boot options I found out booting with ' acpi=ht ' will make the CPU's work again but now
>>>> I have a problem on Suspend. Everything seems to just go down disks etc but the box itself is for some reason still on.
>>>> So I've tested reboot=<> options with no luck.
>>>> ( after waiting 5 minutes to be sure everything is really off I can just hit power button). On resume now everything is fine.
>>>>
>>>> I'm not really sure what is wrong here acpi/hibernation/cpu-hotplug or a mix of all so I'm CC'ing linux-acpi as well.
>>>> The only thing I noticed is the 'Breaking affinity for irq XX' on suspend without acpi=ht messages.
>>>>
>>>> I can't even tell whatever other kernel versions are working because aic7xxx driver didn't got suspend support till now 
>>>> ( or at least never worked here ). I know suspend worked fine on windows with that box.
>>>>
>>>> There is my config and dmesg ( good and bad one ) :
>>>>
>>>>
>>>> http://194.231.229.228/suspend/acpi=ht_working_dmesg.txt
>>>> http://194.231.229.228/suspend/dmesg_broken_cpus_on_resume.txt
>>>> http://194.231.229.228/suspend/config
>>> Well, I think we have a problem with the CPU hotplug.
>>>
>>> Can you try to offline-online CPUs (without suspending) and see if that works?
>> Yes does work when I do it manually :
>>
>> [ 6687.595842] CPU 1 is now offline
>> [ 6687.711425] CPU 2 is now offline
>> [ 6687.819330] CPU 3 is now offline
>> [ 6687.819337] SMP alternatives: switching to UP code
>> [ 6702.109605] SMP alternatives: switching to SMP code
>> [ 6702.110634] Booting processor 1/1 eip 3000
>> [ 6702.122140] Initializing CPU#1
>> [ 6702.182045] Calibrating delay using timer specific routine.. 3989.26 BogoMIPS (lpj=1994633)
>> [ 6702.182063] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000
>> [ 6702.182085] CPU: Trace cache: 12K uops, L1 D cache: 8K
>> [ 6702.182091] CPU: L2 cache: 512K
>> [ 6702.182096] CPU: Physical Processor ID: 0
>> [ 6702.182102] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000
>> [ 6702.182118] Intel machine check architecture supported.
>> [ 6702.182130] Intel machine check reporting enabled on CPU#1.
>> [ 6702.182137] CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
>> [ 6702.182143] CPU1: Thermal monitoring enabled
>> [ 6702.183563] CPU1: Intel(R) Xeon(TM) CPU 2.00GHz stepping 07
>> [ 6702.184488] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>> [ 6702.205500] Switched to high resolution mode on CPU 1
>> [ 6702.210400] SMP alternatives: switching to SMP code
>> [ 6702.212196] Booting processor 2/2 eip 3000
>> [ 6702.222693] Initializing CPU#2
>> [ 6702.282950] Calibrating delay using timer specific routine.. 3988.88 BogoMIPS (lpj=1994443)
>> [ 6702.282962] CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>> [ 6702.282974] CPU: Trace cache: 12K uops, L1 D cache: 8K
>> [ 6702.282977] CPU: L2 cache: 512K
>> [ 6702.282980] CPU: Physical Processor ID: 3
>> [ 6702.282983] CPU: After all inits, caps: 3febfbff 00000000 00000000 0000b080 00000000 00000000 00000000 00000000
>> [ 6702.282991] Intel machine check architecture supported.
>> [ 6702.282998] Intel machine check reporting enabled on CPU#2.
>> [ 6702.283001] CPU2: Intel P4/Xeon Extended MCE MSRs (12) available
>> [ 6702.283005] CPU2: Thermal monitoring enabled
>> [ 6702.283300] CPU2: Intel(R) XEON(TM) CPU 2.00GHz stepping 04
>> [ 6702.284296] checking TSC synchronization [CPU#1 -> CPU#2]: passed.
>> [ 6702.305317] Switched to high resolution mode on CPU 2
>> [ 6702.312356] SMP alternatives: switching to SMP code
>> [ 6702.313995] Booting processor 3/3 eip 3000
>> [ 6702.324511] Initializing CPU#3
>> [ 6702.384864] Calibrating delay using timer specific routine.. 3988.87 BogoMIPS (lpj=1994438)
>> [ 6702.384875] CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>> [ 6702.384888] CPU: Trace cache: 12K uops, L1 D cache: 8K
>> [ 6702.384891] CPU: L2 cache: 512K
>> [ 6702.384894] CPU: Physical Processor ID: 3
>> [ 6702.384897] CPU: After all inits, caps: 3febfbff 00000000 00000000 0000b080 00000000 00000000 00000000 00000000
>> [ 6702.384905] Intel machine check architecture supported.
>> [ 6702.384912] Intel machine check reporting enabled on CPU#3.
>> [ 6702.384915] CPU3: Intel P4/Xeon Extended MCE MSRs (12) available
>> [ 6702.384919] CPU3: Thermal monitoring enabled
>> [ 6702.385146] CPU3: Intel(R) XEON(TM) CPU 2.00GHz stepping 04
>> [ 6702.386252] checking TSC synchronization [CPU#1 -> CPU#3]: passed.
>> [ 6702.407259] Switched to high resolution mode on CPU 3
>>
>> ...
>>
>> done with :
>> for i in cpu1 cpu2 cpu3; do echo 0 >/sys/devices/system/cpu/$i/online; done
>>
>> for i in cpu1 cpu2 cpu3; do echo 1 >/sys/devices/system/cpu/$i/online; done
> 
> Hm, well.
> 
> Please apply the appended patch and then try:

Ok will do right after I test with disabled HT

> 
> # echo 8 > /proc/sys/kernel/printk
> # echo 5 > /sys/power/pm_test_level
> # echo mem > /sys/power/state
> (should wait for approx. 3 sec. and return to the boot prompt)
> # echo 4 > /sys/power/pm_test_level
> # echo mem > /sys/power/state
> (should wait for approx. 3 sec. and return to the boot prompt)
> ...
> # echo 1 > /sys/power/pm_test_level
> # echo mem > /sys/power/state
> (should wait for approx. 3 sec. and return to the boot prompt)
> 
> and see if you can reproduce the problem and for which test level.
> 
> [Echoing 0 to /sys/power/pm_test_level restores the normal behavior.]
> 
> Greetings,
> Rafael
> 
> 
> ---
>  kernel/power/main.c  |   75 ++++++++++++++++++++++++++++++++++++++++++++-------
>  kernel/power/power.h |   10 ++++++
>  2 files changed, 76 insertions(+), 9 deletions(-)
> 
> Index: linux-2.6/kernel/power/main.c
> ===================================================================
> --- linux-2.6.orig/kernel/power/main.c
> +++ linux-2.6/kernel/power/main.c
> @@ -28,6 +28,46 @@ BLOCKING_NOTIFIER_HEAD(pm_chain_head);
>  
>  DEFINE_MUTEX(pm_mutex);
>  
> +#ifdef CONFIG_PM_DEBUG
> +int pm_test_level = TEST_NONE;
> +
> +static int suspend_test(int level)
> +{
> +	if (pm_test_level == level) {
> +		printk(KERN_INFO "suspend debug: Waiting for 3 seconds.\n");
> +		mdelay(3000);
> +		return 1;
> +	}
> +	return 0;
> +}
> +
> +static ssize_t pm_test_level_show(struct kset *kset, char *buf)
> +{
> +	return sprintf(buf, "%d\n", pm_test_level);
> +}
> +
> +static ssize_t
> +pm_test_level_store(struct kset *kset, const char *buf, size_t n)
> +{
> +	int val;
> +
> +	if (sscanf(buf, "%d", &val) != 1)
> +		return -EINVAL;
> +
> +	if (val < TEST_NONE || val > TEST_FREEZER)
> +		return -EINVAL;
> +
> +	pm_test_level = val;
> +
> +	return n;
> +}
> +
> +power_attr(pm_test_level);
> +#else /* !CONFIG_PM_DEBUG */
> +static inline int suspend_test(int level) { return 0; }
> +#endif /* !CONFIG_PM_DEBUG */
> +
> +
>  #ifdef CONFIG_SUSPEND
>  
>  /* This is just an arbitrary number */
> @@ -133,7 +173,10 @@ static int suspend_enter(suspend_state_t
>  		printk(KERN_ERR "Some devices failed to power down\n");
>  		goto Done;
>  	}
> -	error = suspend_ops->enter(state);
> +
> +	if (!suspend_test(TEST_CORE))
> +		error = suspend_ops->enter(state);
> +
>  	device_power_up();
>   Done:
>  	arch_suspend_enable_irqs();
> @@ -164,16 +207,25 @@ int suspend_devices_and_enter(suspend_st
>  		printk(KERN_ERR "Some devices failed to suspend\n");
>  		goto Resume_console;
>  	}
> +
> +	if (suspend_test(TEST_DEVICES))
> +		goto Resume_devices;
> +
>  	if (suspend_ops->prepare) {
>  		error = suspend_ops->prepare();
>  		if (error)
>  			goto Resume_devices;
>  	}
> +
> +	if (suspend_test(TEST_PLATFORM))
> +		goto Finish;
> +
>  	error = disable_nonboot_cpus();
> -	if (!error)
> +	if (!error && !suspend_test(TEST_CPUS))
>  		suspend_enter(state);
>  
>  	enable_nonboot_cpus();
> + Finish:
>  	if (suspend_ops->finish)
>  		suspend_ops->finish();
>   Resume_devices:
> @@ -240,12 +292,17 @@ static int enter_state(suspend_state_t s
>  	printk("done.\n");
>  
>  	pr_debug("PM: Preparing system for %s sleep\n", pm_states[state]);
> -	if ((error = suspend_prepare()))
> +	error = suspend_prepare();
> +	if (error)
>  		goto Unlock;
>  
> +	if (suspend_test(TEST_FREEZER))
> +		goto Finish;
> +
>  	pr_debug("PM: Entering %s sleep\n", pm_states[state]);
>  	error = suspend_devices_and_enter(state);
>  
> + Finish:
>  	pr_debug("PM: Finishing wakeup.\n");
>  	suspend_finish();
>   Unlock:
> @@ -363,18 +420,18 @@ pm_trace_store(struct kset *kset, const 
>  }
>  
>  power_attr(pm_trace);
> +#endif /* CONFIG_PM_TRACE */
>  
>  static struct attribute * g[] = {
>  	&state_attr.attr,
> +#ifdef CONFIG_PM_TRACE
>  	&pm_trace_attr.attr,
> +#endif
> +#ifdef CONFIG_PM_DEBUG
> +	&pm_test_level_attr.attr,
> +#endif
>  	NULL,
>  };
> -#else
> -static struct attribute * g[] = {
> -	&state_attr.attr,
> -	NULL,
> -};
> -#endif /* CONFIG_PM_TRACE */
>  
>  static struct attribute_group attr_group = {
>  	.attrs = g,
> Index: linux-2.6/kernel/power/power.h
> ===================================================================
> --- linux-2.6.orig/kernel/power/power.h
> +++ linux-2.6/kernel/power/power.h
> @@ -211,3 +211,13 @@ static inline int pm_notifier_call_chain
>  	return (blocking_notifier_call_chain(&pm_chain_head, val, NULL)
>  			== NOTIFY_BAD) ? -EINVAL : 0;
>  }
> +
> +/* Suspend test levels */
> +enum {
> +	TEST_NONE,
> +	TEST_CORE,
> +	TEST_CPUS,
> +	TEST_PLATFORM,
> +	TEST_DEVICES,
> +	TEST_FREEZER
> +};
> 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists