| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20071130112429.GA3605@elte.hu>
Date: Fri, 30 Nov 2007 12:24:29 +0100
From: Ingo Molnar <mingo@...e.hu>
To: Christoph Lameter <clameter@....com>
Cc: Rusty Russell <rusty@...tcorp.com.au>, Andi Kleen <ak@...e.de>,
Jeremy Fitzhardinge <jeremy@...p.org>,
linux-kernel@...r.kernel.org, Thomas Gleixner <tglx@...utronix.de>
Subject: Re: [patch 0/3] Per cpu relocation to ZERO and x86_32 percpu ops
on x86_64
* Christoph Lameter <clameter@....com> wrote:
> This patchset allows the use of x86_32 percpu ops on x86_64 while
> maintaining %gs pointing to the pda. It does that by moving the x86_64
> pda into the percpu area (thereby pointing %gs at the per cpu area)
> and then relocating the x86_64 per cpu variables to start at 0.
>
> Patch applies on top of the per cpu cleanup patches V2. See
> http://marc.info/?l=linux-kernel&m=119628478316525&w=2
>
> Ultimately I think we can make the per cpu accessors arch independent
> (see the RFC at
> http://marc.info/?l=linux-kernel&m=119552126330405&w=2). There is a
> performance benefit from using these in core code.
i've picked up your cleanup series and this relocation series as well,
but it crashed on x86 32-bit UP, with:
[ 78.692936] Freeing unused kernel memory: 656k freed
[ 78.697750] BUG: spinlock wrong owner on CPU#0, /0�
(no other messages, hard lockup)
find below my manual merge against x86.git, maybe i made some merging
mistake. x86.git can be picked up via:
git-pull git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git mm
Ingo
-------------------->
Index: linux-x86.q/arch/ia64/Kconfig
===================================================================
--- linux-x86.q.orig/arch/ia64/Kconfig
+++ linux-x86.q/arch/ia64/Kconfig
@@ -75,6 +75,9 @@ config GENERIC_TIME_VSYSCALL
bool
default y
+config ARCH_SETS_UP_PER_CPU_AREA
+ def_bool y
+
config DMI
bool
default y
Index: linux-x86.q/arch/powerpc/Kconfig
===================================================================
--- linux-x86.q.orig/arch/powerpc/Kconfig
+++ linux-x86.q/arch/powerpc/Kconfig
@@ -42,6 +42,9 @@ config GENERIC_HARDIRQS
bool
default y
+config ARCH_SETS_UP_PER_CPU_AREA
+ def_bool PPC64
+
config IRQ_PER_CPU
bool
default y
Index: linux-x86.q/arch/sparc64/Kconfig
===================================================================
--- linux-x86.q.orig/arch/sparc64/Kconfig
+++ linux-x86.q/arch/sparc64/Kconfig
@@ -66,6 +66,9 @@ config AUDIT_ARCH
bool
default y
+config ARCH_SETS_UP_PER_CPU_AREA
+ def_bool y
+
config ARCH_NO_VIRT_TO_BUS
def_bool y
Index: linux-x86.q/arch/sparc64/mm/init.c
===================================================================
--- linux-x86.q.orig/arch/sparc64/mm/init.c
+++ linux-x86.q/arch/sparc64/mm/init.c
@@ -1323,6 +1323,11 @@ pgd_t swapper_pg_dir[2048];
static void sun4u_pgprot_init(void);
static void sun4v_pgprot_init(void);
+/* Dummy function */
+void __init setup_per_cpu_areas(void)
+{
+}
+
void __init paging_init(void)
{
unsigned long end_pfn, pages_avail, shift, phys_base;
Index: linux-x86.q/arch/x86/Kconfig
===================================================================
--- linux-x86.q.orig/arch/x86/Kconfig
+++ linux-x86.q/arch/x86/Kconfig
@@ -116,9 +116,13 @@ config GENERIC_TIME_VSYSCALL
bool
default X86_64
+config ARCH_SETS_UP_PER_CPU_AREA
+ def_bool X86_64
-
-
+config PERCPU_ZERO_BASED
+ bool
+ depends on X86_64 && SMP
+ default y
config ZONE_DMA32
bool
Index: linux-x86.q/arch/x86/kernel/head64.c
===================================================================
--- linux-x86.q.orig/arch/x86/kernel/head64.c
+++ linux-x86.q/arch/x86/kernel/head64.c
@@ -22,6 +22,12 @@
#include <asm/sections.h>
#include <asm/kdebug.h>
+/*
+ * Only used before the per cpu areas are setup. The use for the non possible
+ * cpus continues after boot
+ */
+static struct x8664_pda boot_cpu_pda[NR_CPUS] __cacheline_aligned;
+
static void __init zap_identity_mappings(void)
{
pgd_t *pgd = pgd_offset_k(0UL);
Index: linux-x86.q/arch/x86/kernel/setup64.c
===================================================================
--- linux-x86.q.orig/arch/x86/kernel/setup64.c
+++ linux-x86.q/arch/x86/kernel/setup64.c
@@ -30,7 +30,9 @@ cpumask_t cpu_initialized __cpuinitdata
struct x8664_pda *_cpu_pda[NR_CPUS] __read_mostly;
EXPORT_SYMBOL(_cpu_pda);
-struct x8664_pda boot_cpu_pda[NR_CPUS] __cacheline_aligned;
+
+DEFINE_PER_CPU_FIRST(struct x8664_pda, pda);
+EXPORT_PER_CPU_SYMBOL(pda);
struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table };
@@ -109,10 +111,15 @@ void __init setup_per_cpu_areas(void)
}
if (!ptr)
panic("Cannot allocate cpu data for CPU %d\n", i);
- cpu_pda(i)->data_offset = ptr - __per_cpu_start;
- memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
+ memcpy(ptr, __per_cpu_load, __per_cpu_size);
+ /* Relocate the pda */
+ memcpy(ptr, cpu_pda(i), sizeof(struct x8664_pda));
+ cpu_pda(i) = (struct x8664_pda *)ptr;
+ cpu_pda(i)->data_offset = (unsigned long)ptr;
}
-}
+ /* Fix up pda for this processor .... */
+ pda_init(0);
+}
void pda_init(int cpu)
{
Index: linux-x86.q/arch/x86/kernel/smpboot_64.c
===================================================================
--- linux-x86.q.orig/arch/x86/kernel/smpboot_64.c
+++ linux-x86.q/arch/x86/kernel/smpboot_64.c
@@ -556,22 +556,6 @@ static int __cpuinit do_boot_cpu(int cpu
return -1;
}
- /* Allocate node local memory for AP pdas */
- if (cpu_pda(cpu) == &boot_cpu_pda[cpu]) {
- struct x8664_pda *newpda, *pda;
- int node = cpu_to_node(cpu);
- pda = cpu_pda(cpu);
- newpda = kmalloc_node(sizeof (struct x8664_pda), GFP_ATOMIC,
- node);
- if (newpda) {
- memcpy(newpda, pda, sizeof (struct x8664_pda));
- cpu_pda(cpu) = newpda;
- } else
- printk(KERN_ERR
- "Could not allocate node local PDA for CPU %d on node %d\n",
- cpu, node);
- }
-
alternatives_smp_switch(1);
c_idle.idle = get_idle_for_cpu(cpu);
Index: linux-x86.q/arch/x86/kernel/vmlinux_64.lds.S
===================================================================
--- linux-x86.q.orig/arch/x86/kernel/vmlinux_64.lds.S
+++ linux-x86.q/arch/x86/kernel/vmlinux_64.lds.S
@@ -16,6 +16,7 @@ jiffies_64 = jiffies;
_proxy_pda = 1;
PHDRS {
text PT_LOAD FLAGS(5); /* R_E */
+ percpu PT_LOAD FLAGS(4); /* R__ */
data PT_LOAD FLAGS(7); /* RWE */
user PT_LOAD FLAGS(7); /* RWE */
data.init PT_LOAD FLAGS(7); /* RWE */
Index: linux-x86.q/include/asm-generic/percpu.h
===================================================================
--- linux-x86.q.orig/include/asm-generic/percpu.h
+++ linux-x86.q/include/asm-generic/percpu.h
@@ -3,28 +3,65 @@
#include <linux/compiler.h>
#include <linux/threads.h>
-#define __GENERIC_PER_CPU
+/*
+ * Determine the real variable name from the name visible in the
+ * kernel sources.
+ */
+#define per_cpu_var(var) per_cpu__##var
+
#ifdef CONFIG_SMP
+/*
+ * per_cpu_offset() is the offset that has to be added to a
+ * percpu variable to get to the instance for a certain processor.
+ *
+ * Most arches use the __per_cpu_offset array for those offsets but
+ * some arches have their own ways of determining the offset (x86_64, s390).
+ */
+#ifndef __per_cpu_offset
extern unsigned long __per_cpu_offset[NR_CPUS];
-
#define per_cpu_offset(x) (__per_cpu_offset[x])
+#endif
-/* Separate out the type, so (int[3], foo) works. */
-#define DEFINE_PER_CPU(type, name) \
- __attribute__((__section__(".data.percpu"))) __typeof__(type) per_cpu__##name
-
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \
- __attribute__((__section__(".data.percpu.shared_aligned"))) \
- __typeof__(type) per_cpu__##name \
- ____cacheline_aligned_in_smp
-
-/* var is in discarded region: offset to particular copy we want */
-#define per_cpu(var, cpu) (*({ \
- extern int simple_identifier_##var(void); \
- RELOC_HIDE(&per_cpu__##var, __per_cpu_offset[cpu]); }))
-#define __get_cpu_var(var) per_cpu(var, smp_processor_id())
-#define __raw_get_cpu_var(var) per_cpu(var, raw_smp_processor_id())
+/*
+ * Determine the offset for the currently active processor.
+ * An arch may define __my_cpu_offset to provide a more effective
+ * means of obtaining the offset to the per cpu variables of the
+ * current processor.
+ */
+#ifndef __my_cpu_offset
+#define __my_cpu_offset per_cpu_offset(raw_smp_processor_id())
+#define my_cpu_offset per_cpu_offset(smp_processor_id())
+#else
+#define my_cpu_offset __my_cpu_offset
+#endif
+
+/*
+ * Add a offset to a pointer but keep the pointer as is.
+ *
+ * Only S390 provides its own means of moving the pointer.
+ */
+#ifndef SHIFT_PTR
+#ifdef CONFIG_PERCPU_ZERO_BASED
+#define SHIFT_PTR(__p, __offset) \
+ ((__typeof(__p))(((void *)(__p)) + (__offset)))
+#else
+#define SHIFT_PTR(__p, __offset) RELOC_HIDE((__p), (__offset))
+#endif /* CONFIG_PER_CPU_ZERO_BASED */
+#endif /* SHIFT_PTR */
+
+/*
+ * A percpu variable may point to a discarded reghions. The following are
+ * established ways to produce a usable pointer from the percpu variable
+ * offset.
+ */
+#define per_cpu(var, cpu) (*SHIFT_PTR(&per_cpu_var(var), per_cpu_offset(cpu)))
+#define __get_cpu_var(var) (*SHIFT_PTR(&per_cpu_var(var), my_cpu_offset))
+#define __raw_get_cpu_var(var) (*SHIFT_PTR(&per_cpu_var(var), __my_cpu_offset))
+
+#ifdef CONFIG_ARCH_SETS_UP_PER_CPU_AREA
+extern void setup_per_cpu_areas(void);
+#endif
/* A macro to avoid #include hell... */
#define percpu_modcopy(pcpudst, src, size) \
@@ -36,21 +73,17 @@ do { \
} while (0)
#else /* ! SMP */
-#define DEFINE_PER_CPU(type, name) \
- __typeof__(type) per_cpu__##name
-
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \
- DEFINE_PER_CPU(type, name)
-
-#define per_cpu(var, cpu) (*((void)(cpu), &per_cpu__##var))
-#define __get_cpu_var(var) per_cpu__##var
-#define __raw_get_cpu_var(var) per_cpu__##var
+#define per_cpu(var, cpu) (*((void)(cpu), &per_cpu_var(var)))
+#define __get_cpu_var(var) per_cpu_var(var)
+#define __raw_get_cpu_var(var) per_cpu_var(var)
#endif /* SMP */
-#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
+#ifndef PER_CPU_ATTRIBUTES
+#define PER_CPU_ATTRIBUTES
+#endif
-#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
-#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
+#define DECLARE_PER_CPU(type, name) extern PER_CPU_ATTRIBUTES \
+ __typeof__(type) per_cpu_var(name)
#endif /* _ASM_GENERIC_PERCPU_H_ */
Index: linux-x86.q/include/asm-generic/sections.h
===================================================================
--- linux-x86.q.orig/include/asm-generic/sections.h
+++ linux-x86.q/include/asm-generic/sections.h
@@ -11,7 +11,17 @@ extern char _sinittext[], _einittext[];
extern char _sextratext[] __attribute__((weak));
extern char _eextratext[] __attribute__((weak));
extern char _end[];
+#ifdef CONFIG_PERCPU_ZERO_BASED
+extern char __per_cpu_load[];
+extern char ____per_cpu_size[];
+#define __per_cpu_size ((unsigned long)&____per_cpu_size)
+#define __per_cpu_start ((char *)0)
+#define __per_cpu_end ((char *)__per_cpu_size)
+#else
extern char __per_cpu_start[], __per_cpu_end[];
+#define __per_cpu_load __per_cpu_start
+#define __per_cpu_size (__per_cpu_end - __per_cpu_start)
+#endif
extern char __kprobes_text_start[], __kprobes_text_end[];
extern char __initdata_begin[], __initdata_end[];
extern char __start_rodata[], __end_rodata[];
Index: linux-x86.q/include/asm-generic/vmlinux.lds.h
===================================================================
--- linux-x86.q.orig/include/asm-generic/vmlinux.lds.h
+++ linux-x86.q/include/asm-generic/vmlinux.lds.h
@@ -255,11 +255,27 @@
*(.initcall7.init) \
*(.initcall7s.init)
+#ifdef CONFIG_PERCPU_ZERO_BASED
+#define PERCPU(align) \
+ . = ALIGN(align); \
+ percpu : { } :percpu \
+ __per_cpu_load = .; \
+ .data.percpu 0 : AT(__per_cpu_load - LOAD_OFFSET) { \
+ *(.data.percpu.first) \
+ *(.data.percpu) \
+ *(.data.percpu.shared_aligned) \
+ ____per_cpu_size = .; \
+ } \
+ . = __per_cpu_load + ____per_cpu_size; \
+ data : { } :data
+#else
#define PERCPU(align) \
. = ALIGN(align); \
__per_cpu_start = .; \
.data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { \
+ *(.data.percpu.first) \
*(.data.percpu) \
*(.data.percpu.shared_aligned) \
} \
__per_cpu_end = .;
+#endif
Index: linux-x86.q/include/asm-ia64/percpu.h
===================================================================
--- linux-x86.q.orig/include/asm-ia64/percpu.h
+++ linux-x86.q/include/asm-ia64/percpu.h
@@ -12,31 +12,10 @@
# define THIS_CPU(var) (per_cpu__##var) /* use this to mark accesses to per-CPU variables... */
#else /* !__ASSEMBLY__ */
-
#include <linux/threads.h>
#ifdef HAVE_MODEL_SMALL_ATTRIBUTE
-# define __SMALL_ADDR_AREA __attribute__((__model__ (__small__)))
-#else
-# define __SMALL_ADDR_AREA
-#endif
-
-#define DECLARE_PER_CPU(type, name) \
- extern __SMALL_ADDR_AREA __typeof__(type) per_cpu__##name
-
-/* Separate out the type, so (int[3], foo) works. */
-#define DEFINE_PER_CPU(type, name) \
- __attribute__((__section__(".data.percpu"))) \
- __SMALL_ADDR_AREA __typeof__(type) per_cpu__##name
-
-#ifdef CONFIG_SMP
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \
- __attribute__((__section__(".data.percpu.shared_aligned"))) \
- __SMALL_ADDR_AREA __typeof__(type) per_cpu__##name \
- ____cacheline_aligned_in_smp
-#else
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \
- DEFINE_PER_CPU(type, name)
+# define PER_CPU_ATTRIBUTES __attribute__((__model__ (__small__)))
#endif
/*
@@ -45,39 +24,29 @@
*/
#ifdef CONFIG_SMP
-extern unsigned long __per_cpu_offset[NR_CPUS];
-#define per_cpu_offset(x) (__per_cpu_offset[x])
-
-/* Equal to __per_cpu_offset[smp_processor_id()], but faster to access: */
-DECLARE_PER_CPU(unsigned long, local_per_cpu_offset);
-
-#define per_cpu(var, cpu) (*RELOC_HIDE(&per_cpu__##var, __per_cpu_offset[cpu]))
-#define __get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, __ia64_per_cpu_var(local_per_cpu_offset)))
-#define __raw_get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, __ia64_per_cpu_var(local_per_cpu_offset)))
+#define __my_cpu_offset __ia64_per_cpu_var(local_per_cpu_offset)
extern void percpu_modcopy(void *pcpudst, const void *src, unsigned long size);
-extern void setup_per_cpu_areas (void);
extern void *per_cpu_init(void);
#else /* ! SMP */
-#define per_cpu(var, cpu) (*((void)(cpu), &per_cpu__##var))
-#define __get_cpu_var(var) per_cpu__##var
-#define __raw_get_cpu_var(var) per_cpu__##var
#define per_cpu_init() (__phys_per_cpu_start)
#endif /* SMP */
-#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
-#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
-
/*
* Be extremely careful when taking the address of this variable! Due to virtual
* remapping, it is different from the canonical address returned by __get_cpu_var(var)!
* On the positive side, using __ia64_per_cpu_var() instead of __get_cpu_var() is slightly
* more efficient.
*/
-#define __ia64_per_cpu_var(var) (per_cpu__##var)
+#define __ia64_per_cpu_var(var) per_cpu__##var
+
+#include <asm-generic/percpu.h>
+
+/* Equal to __per_cpu_offset[smp_processor_id()], but faster to access: */
+DECLARE_PER_CPU(unsigned long, local_per_cpu_offset);
#endif /* !__ASSEMBLY__ */
Index: linux-x86.q/include/asm-powerpc/percpu.h
===================================================================
--- linux-x86.q.orig/include/asm-powerpc/percpu.h
+++ linux-x86.q/include/asm-powerpc/percpu.h
@@ -16,20 +16,6 @@
#define __my_cpu_offset() get_paca()->data_offset
#define per_cpu_offset(x) (__per_cpu_offset(x))
-/* Separate out the type, so (int[3], foo) works. */
-#define DEFINE_PER_CPU(type, name) \
- __attribute__((__section__(".data.percpu"))) __typeof__(type) per_cpu__##name
-
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \
- __attribute__((__section__(".data.percpu.shared_aligned"))) \
- __typeof__(type) per_cpu__##name \
- ____cacheline_aligned_in_smp
-
-/* var is in discarded region: offset to particular copy we want */
-#define per_cpu(var, cpu) (*RELOC_HIDE(&per_cpu__##var, __per_cpu_offset(cpu)))
-#define __get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, __my_cpu_offset()))
-#define __raw_get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, local_paca->data_offset))
-
/* A macro to avoid #include hell... */
#define percpu_modcopy(pcpudst, src, size) \
do { \
@@ -39,28 +25,7 @@ do { \
(src), (size)); \
} while (0)
-extern void setup_per_cpu_areas(void);
-
-#else /* ! SMP */
-
-#define DEFINE_PER_CPU(type, name) \
- __typeof__(type) per_cpu__##name
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \
- DEFINE_PER_CPU(type, name)
-
-#define per_cpu(var, cpu) (*((void)(cpu), &per_cpu__##var))
-#define __get_cpu_var(var) per_cpu__##var
-#define __raw_get_cpu_var(var) per_cpu__##var
-
#endif /* SMP */
-
-#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
-
-#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
-#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
-
-#else
-#include <asm-generic/percpu.h>
#endif
-
+#include <asm-generic/percpu.h>
#endif /* _ASM_POWERPC_PERCPU_H_ */
Index: linux-x86.q/include/asm-s390/percpu.h
===================================================================
--- linux-x86.q.orig/include/asm-s390/percpu.h
+++ linux-x86.q/include/asm-s390/percpu.h
@@ -4,8 +4,6 @@
#include <linux/compiler.h>
#include <asm/lowcore.h>
-#define __GENERIC_PER_CPU
-
/*
* s390 uses its own implementation for per cpu data, the offset of
* the cpu local data area is cached in the cpu's lowcore memory.
@@ -15,41 +13,24 @@
*/
#if defined(__s390x__) && defined(MODULE)
-#define __reloc_hide(var,offset) (*({ \
+#define SHIFT_PTR(ptr,offset) (({ \
extern int simple_identifier_##var(void); \
unsigned long *__ptr; \
- asm ( "larl %0,per_cpu__"#var"@GOTENT" \
- : "=a" (__ptr) : "X" (per_cpu__##var) ); \
- (typeof(&per_cpu__##var))((*__ptr) + (offset)); }))
+ asm ( "larl %0, %1@...ENT" \
+ : "=a" (__ptr) : "X" (ptr) ); \
+ (typeof(ptr))((*__ptr) + (offset)); }))
#else
-#define __reloc_hide(var, offset) (*({ \
+#define SHIFT_PTR(ptr, offset) (({ \
extern int simple_identifier_##var(void); \
unsigned long __ptr; \
- asm ( "" : "=a" (__ptr) : "0" (&per_cpu__##var) ); \
- (typeof(&per_cpu__##var)) (__ptr + (offset)); }))
+ asm ( "" : "=a" (__ptr) : "0" (ptr) ); \
+ (typeof(ptr)) (__ptr + (offset)); }))
#endif
-#ifdef CONFIG_SMP
-
-extern unsigned long __per_cpu_offset[NR_CPUS];
-
-/* Separate out the type, so (int[3], foo) works. */
-#define DEFINE_PER_CPU(type, name) \
- __attribute__((__section__(".data.percpu"))) \
- __typeof__(type) per_cpu__##name
-
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \
- __attribute__((__section__(".data.percpu.shared_aligned"))) \
- __typeof__(type) per_cpu__##name \
- ____cacheline_aligned_in_smp
-
-#define __get_cpu_var(var) __reloc_hide(var,S390_lowcore.percpu_offset)
-#define __raw_get_cpu_var(var) __reloc_hide(var,S390_lowcore.percpu_offset)
-#define per_cpu(var,cpu) __reloc_hide(var,__per_cpu_offset[cpu])
-#define per_cpu_offset(x) (__per_cpu_offset[x])
+#define __my_cpu_offset S390_lowcore.percpu_offset
/* A macro to avoid #include hell... */
#define percpu_modcopy(pcpudst, src, size) \
@@ -60,22 +41,6 @@ do { \
(src), (size)); \
} while (0)
-#else /* ! SMP */
-
-#define DEFINE_PER_CPU(type, name) \
- __typeof__(type) per_cpu__##name
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \
- DEFINE_PER_CPU(type, name)
-
-#define __get_cpu_var(var) __reloc_hide(var,0)
-#define __raw_get_cpu_var(var) __reloc_hide(var,0)
-#define per_cpu(var,cpu) __reloc_hide(var,0)
-
-#endif /* SMP */
-
-#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
-
-#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
-#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
+#include <asm-generic/percpu.h>
#endif /* __ARCH_S390_PERCPU__ */
Index: linux-x86.q/include/asm-sparc64/percpu.h
===================================================================
--- linux-x86.q.orig/include/asm-sparc64/percpu.h
+++ linux-x86.q/include/asm-sparc64/percpu.h
@@ -7,7 +7,6 @@ register unsigned long __local_per_cpu_o
#ifdef CONFIG_SMP
-#define setup_per_cpu_areas() do { } while (0)
extern void real_setup_per_cpu_areas(void);
extern unsigned long __per_cpu_base;
@@ -16,15 +15,6 @@ extern unsigned long __per_cpu_shift;
(__per_cpu_base + ((unsigned long)(__cpu) << __per_cpu_shift))
#define per_cpu_offset(x) (__per_cpu_offset(x))
-/* Separate out the type, so (int[3], foo) works. */
-#define DEFINE_PER_CPU(type, name) \
- __attribute__((__section__(".data.percpu"))) __typeof__(type) per_cpu__##name
-
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \
- __attribute__((__section__(".data.percpu.shared_aligned"))) \
- __typeof__(type) per_cpu__##name \
- ____cacheline_aligned_in_smp
-
/* var is in discarded region: offset to particular copy we want */
#define per_cpu(var, cpu) (*RELOC_HIDE(&per_cpu__##var, __per_cpu_offset(cpu)))
#define __get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, __local_per_cpu_offset))
@@ -41,10 +31,6 @@ do { \
#else /* ! SMP */
#define real_setup_per_cpu_areas() do { } while (0)
-#define DEFINE_PER_CPU(type, name) \
- __typeof__(type) per_cpu__##name
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \
- DEFINE_PER_CPU(type, name)
#define per_cpu(var, cpu) (*((void)cpu, &per_cpu__##var))
#define __get_cpu_var(var) per_cpu__##var
@@ -54,7 +40,4 @@ do { \
#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
-#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
-#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
-
#endif /* __ARCH_SPARC64_PERCPU__ */
Index: linux-x86.q/include/asm-x86/pda.h
===================================================================
--- linux-x86.q.orig/include/asm-x86/pda.h
+++ linux-x86.q/include/asm-x86/pda.h
@@ -39,7 +39,6 @@ struct x8664_pda {
} ____cacheline_aligned_in_smp;
extern struct x8664_pda *_cpu_pda[];
-extern struct x8664_pda boot_cpu_pda[];
extern void pda_init(int);
#define cpu_pda(i) (_cpu_pda[i])
Index: linux-x86.q/include/asm-x86/percpu.h
===================================================================
--- linux-x86.q.orig/include/asm-x86/percpu.h
+++ linux-x86.q/include/asm-x86/percpu.h
@@ -1,5 +1,152 @@
-#ifdef CONFIG_X86_32
-# include "percpu_32.h"
+#ifndef _ASM_X86_PERCPU_H_
+#define _ASM_X86_PERCPU_H_
+
+#ifdef CONFIG_X86_64
+#include <linux/compiler.h>
+
+/* Same as asm-generic/percpu.h, except that we store the per cpu offset
+ in the PDA. Longer term the PDA and every per cpu variable
+ should be just put into a single section and referenced directly
+ from %gs */
+
+#ifdef CONFIG_SMP
+#include <asm/pda.h>
+
+#define __per_cpu_offset(cpu) (cpu_pda(cpu)->data_offset)
+#define __my_cpu_offset read_pda(data_offset)
+
+#define per_cpu_offset(x) (__per_cpu_offset(x))
+
+#define __percpu_seg "%%gs:"
+
#else
-# include "percpu_64.h"
+
+#define __percpu_seg ""
+
#endif
+#include <asm-generic/percpu.h>
+
+DECLARE_PER_CPU(struct x8664_pda, pda);
+
+#else /* CONFIG_X86_64 */
+
+#ifdef __ASSEMBLY__
+
+/*
+ * PER_CPU finds an address of a per-cpu variable.
+ *
+ * Args:
+ * var - variable name
+ * reg - 32bit register
+ *
+ * The resulting address is stored in the "reg" argument.
+ *
+ * Example:
+ * PER_CPU(cpu_gdt_descr, %ebx)
+ */
+#ifdef CONFIG_SMP
+#define PER_CPU(var, reg) \
+ movl %fs:per_cpu__##this_cpu_off, reg; \
+ lea per_cpu__##var(reg), reg
+#define PER_CPU_VAR(var) %fs:per_cpu__##var
+#else /* ! SMP */
+#define PER_CPU(var, reg) \
+ movl $per_cpu__##var, reg
+#define PER_CPU_VAR(var) per_cpu__##var
+#endif /* SMP */
+
+#else /* ...!ASSEMBLY */
+
+/*
+ * PER_CPU finds an address of a per-cpu variable.
+ *
+ * Args:
+ * var - variable name
+ * cpu - 32bit register containing the current CPU number
+ *
+ * The resulting address is stored in the "cpu" argument.
+ *
+ * Example:
+ * PER_CPU(cpu_gdt_descr, %ebx)
+ */
+#ifdef CONFIG_SMP
+
+#define __my_cpu_offset x86_read_percpu(this_cpu_off)
+
+/* fs segment starts at (positive) offset == __per_cpu_offset[cpu] */
+#define __percpu_seg "%%fs:"
+
+#else /* !SMP */
+
+#define __percpu_seg ""
+
+#endif /* SMP */
+
+#include <asm-generic/percpu.h>
+
+/* We can use this directly for local CPU (faster). */
+DECLARE_PER_CPU(unsigned long, this_cpu_off);
+
+#endif /* __ASSEMBLY__ */
+#endif /* !CONFIG_X86_64 */
+
+#ifndef __ASSEMBLY__
+
+/* For arch-specific code, we can use direct single-insn ops (they
+ * don't give an lvalue though). */
+extern void __bad_percpu_size(void);
+
+#define percpu_to_op(op,var,val) \
+ do { \
+ typedef typeof(var) T__; \
+ if (0) { T__ tmp__; tmp__ = (val); } \
+ switch (sizeof(var)) { \
+ case 1: \
+ asm(op "b %1,"__percpu_seg"%0" \
+ : "+m" (var) \
+ :"ri" ((T__)val)); \
+ break; \
+ case 2: \
+ asm(op "w %1,"__percpu_seg"%0" \
+ : "+m" (var) \
+ :"ri" ((T__)val)); \
+ break; \
+ case 4: \
+ asm(op "l %1,"__percpu_seg"%0" \
+ : "+m" (var) \
+ :"ri" ((T__)val)); \
+ break; \
+ default: __bad_percpu_size(); \
+ } \
+ } while (0)
+
+#define percpu_from_op(op,var) \
+ ({ \
+ typeof(var) ret__; \
+ switch (sizeof(var)) { \
+ case 1: \
+ asm(op "b "__percpu_seg"%1,%0" \
+ : "=r" (ret__) \
+ : "m" (var)); \
+ break; \
+ case 2: \
+ asm(op "w "__percpu_seg"%1,%0" \
+ : "=r" (ret__) \
+ : "m" (var)); \
+ break; \
+ case 4: \
+ asm(op "l "__percpu_seg"%1,%0" \
+ : "=r" (ret__) \
+ : "m" (var)); \
+ break; \
+ default: __bad_percpu_size(); \
+ } \
+ ret__; })
+
+#define x86_read_percpu(var) percpu_from_op("mov", per_cpu__##var)
+#define x86_write_percpu(var,val) percpu_to_op("mov", per_cpu__##var, val)
+#define x86_add_percpu(var,val) percpu_to_op("add", per_cpu__##var, val)
+#define x86_sub_percpu(var,val) percpu_to_op("sub", per_cpu__##var, val)
+#define x86_or_percpu(var,val) percpu_to_op("or", per_cpu__##var, val)
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_X86_PERCPU_H_ */
Index: linux-x86.q/include/asm-x86/percpu_32.h
===================================================================
--- linux-x86.q.orig/include/asm-x86/percpu_32.h
+++ /dev/null
@@ -1,154 +0,0 @@
-#ifndef __ARCH_I386_PERCPU__
-#define __ARCH_I386_PERCPU__
-
-#ifdef __ASSEMBLY__
-
-/*
- * PER_CPU finds an address of a per-cpu variable.
- *
- * Args:
- * var - variable name
- * reg - 32bit register
- *
- * The resulting address is stored in the "reg" argument.
- *
- * Example:
- * PER_CPU(cpu_gdt_descr, %ebx)
- */
-#ifdef CONFIG_SMP
-#define PER_CPU(var, reg) \
- movl %fs:per_cpu__##this_cpu_off, reg; \
- lea per_cpu__##var(reg), reg
-#define PER_CPU_VAR(var) %fs:per_cpu__##var
-#else /* ! SMP */
-#define PER_CPU(var, reg) \
- movl $per_cpu__##var, reg
-#define PER_CPU_VAR(var) per_cpu__##var
-#endif /* SMP */
-
-#else /* ...!ASSEMBLY */
-
-/*
- * PER_CPU finds an address of a per-cpu variable.
- *
- * Args:
- * var - variable name
- * cpu - 32bit register containing the current CPU number
- *
- * The resulting address is stored in the "cpu" argument.
- *
- * Example:
- * PER_CPU(cpu_gdt_descr, %ebx)
- */
-#ifdef CONFIG_SMP
-/* Same as generic implementation except for optimized local access. */
-#define __GENERIC_PER_CPU
-
-/* This is used for other cpus to find our section. */
-extern unsigned long __per_cpu_offset[];
-
-#define per_cpu_offset(x) (__per_cpu_offset[x])
-
-/* Separate out the type, so (int[3], foo) works. */
-#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
-#define DEFINE_PER_CPU(type, name) \
- __attribute__((__section__(".data.percpu"))) __typeof__(type) per_cpu__##name
-
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \
- __attribute__((__section__(".data.percpu.shared_aligned"))) \
- __typeof__(type) per_cpu__##name \
- ____cacheline_aligned_in_smp
-
-/* We can use this directly for local CPU (faster). */
-DECLARE_PER_CPU(unsigned long, this_cpu_off);
-
-/* var is in discarded region: offset to particular copy we want */
-#define per_cpu(var, cpu) (*({ \
- extern int simple_indentifier_##var(void); \
- RELOC_HIDE(&per_cpu__##var, __per_cpu_offset[cpu]); }))
-
-#define __raw_get_cpu_var(var) (*({ \
- extern int simple_indentifier_##var(void); \
- RELOC_HIDE(&per_cpu__##var, x86_read_percpu(this_cpu_off)); \
-}))
-
-#define __get_cpu_var(var) __raw_get_cpu_var(var)
-
-/* A macro to avoid #include hell... */
-#define percpu_modcopy(pcpudst, src, size) \
-do { \
- unsigned int __i; \
- for_each_possible_cpu(__i) \
- memcpy((pcpudst)+__per_cpu_offset[__i], \
- (src), (size)); \
-} while (0)
-
-#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
-#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
-
-/* fs segment starts at (positive) offset == __per_cpu_offset[cpu] */
-#define __percpu_seg "%%fs:"
-#else /* !SMP */
-#include <asm-generic/percpu.h>
-#define __percpu_seg ""
-#endif /* SMP */
-
-/* For arch-specific code, we can use direct single-insn ops (they
- * don't give an lvalue though). */
-extern void __bad_percpu_size(void);
-
-#define percpu_to_op(op,var,val) \
- do { \
- typedef typeof(var) T__; \
- if (0) { T__ tmp__; tmp__ = (val); } \
- switch (sizeof(var)) { \
- case 1: \
- asm(op "b %1,"__percpu_seg"%0" \
- : "+m" (var) \
- :"ri" ((T__)val)); \
- break; \
- case 2: \
- asm(op "w %1,"__percpu_seg"%0" \
- : "+m" (var) \
- :"ri" ((T__)val)); \
- break; \
- case 4: \
- asm(op "l %1,"__percpu_seg"%0" \
- : "+m" (var) \
- :"ri" ((T__)val)); \
- break; \
- default: __bad_percpu_size(); \
- } \
- } while (0)
-
-#define percpu_from_op(op,var) \
- ({ \
- typeof(var) ret__; \
- switch (sizeof(var)) { \
- case 1: \
- asm(op "b "__percpu_seg"%1,%0" \
- : "=r" (ret__) \
- : "m" (var)); \
- break; \
- case 2: \
- asm(op "w "__percpu_seg"%1,%0" \
- : "=r" (ret__) \
- : "m" (var)); \
- break; \
- case 4: \
- asm(op "l "__percpu_seg"%1,%0" \
- : "=r" (ret__) \
- : "m" (var)); \
- break; \
- default: __bad_percpu_size(); \
- } \
- ret__; })
-
-#define x86_read_percpu(var) percpu_from_op("mov", per_cpu__##var)
-#define x86_write_percpu(var,val) percpu_to_op("mov", per_cpu__##var, val)
-#define x86_add_percpu(var,val) percpu_to_op("add", per_cpu__##var, val)
-#define x86_sub_percpu(var,val) percpu_to_op("sub", per_cpu__##var, val)
-#define x86_or_percpu(var,val) percpu_to_op("or", per_cpu__##var, val)
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __ARCH_I386_PERCPU__ */
Index: linux-x86.q/include/asm-x86/percpu_64.h
===================================================================
--- linux-x86.q.orig/include/asm-x86/percpu_64.h
+++ /dev/null
@@ -1,68 +0,0 @@
-#ifndef _ASM_X8664_PERCPU_H_
-#define _ASM_X8664_PERCPU_H_
-#include <linux/compiler.h>
-
-/* Same as asm-generic/percpu.h, except that we store the per cpu offset
- in the PDA. Longer term the PDA and every per cpu variable
- should be just put into a single section and referenced directly
- from %gs */
-
-#ifdef CONFIG_SMP
-
-#include <asm/pda.h>
-
-#define __per_cpu_offset(cpu) (cpu_pda(cpu)->data_offset)
-#define __my_cpu_offset() read_pda(data_offset)
-
-#define per_cpu_offset(x) (__per_cpu_offset(x))
-
-/* Separate out the type, so (int[3], foo) works. */
-#define DEFINE_PER_CPU(type, name) \
- __attribute__((__section__(".data.percpu"))) __typeof__(type) per_cpu__##name
-
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \
- __attribute__((__section__(".data.percpu.shared_aligned"))) \
- __typeof__(type) per_cpu__##name \
- ____cacheline_internodealigned_in_smp
-
-/* var is in discarded region: offset to particular copy we want */
-#define per_cpu(var, cpu) (*({ \
- extern int simple_identifier_##var(void); \
- RELOC_HIDE(&per_cpu__##var, __per_cpu_offset(cpu)); }))
-#define __get_cpu_var(var) (*({ \
- extern int simple_identifier_##var(void); \
- RELOC_HIDE(&per_cpu__##var, __my_cpu_offset()); }))
-#define __raw_get_cpu_var(var) (*({ \
- extern int simple_identifier_##var(void); \
- RELOC_HIDE(&per_cpu__##var, __my_cpu_offset()); }))
-
-/* A macro to avoid #include hell... */
-#define percpu_modcopy(pcpudst, src, size) \
-do { \
- unsigned int __i; \
- for_each_possible_cpu(__i) \
- memcpy((pcpudst)+__per_cpu_offset(__i), \
- (src), (size)); \
-} while (0)
-
-extern void setup_per_cpu_areas(void);
-
-#else /* ! SMP */
-
-#define DEFINE_PER_CPU(type, name) \
- __typeof__(type) per_cpu__##name
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \
- DEFINE_PER_CPU(type, name)
-
-#define per_cpu(var, cpu) (*((void)(cpu), &per_cpu__##var))
-#define __get_cpu_var(var) per_cpu__##var
-#define __raw_get_cpu_var(var) per_cpu__##var
-
-#endif /* SMP */
-
-#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
-
-#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
-#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
-
-#endif /* _ASM_X8664_PERCPU_H_ */
Index: linux-x86.q/include/linux/percpu.h
===================================================================
--- linux-x86.q.orig/include/linux/percpu.h
+++ linux-x86.q/include/linux/percpu.h
@@ -9,6 +9,27 @@
#include <asm/percpu.h>
+#define DEFINE_PER_CPU(type, name) \
+ __attribute__((__section__(".data.percpu"))) \
+ PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
+
+#ifdef CONFIG_SMP
+#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \
+ __attribute__((__section__(".data.percpu.shared_aligned"))) \
+ PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name \
+ ____cacheline_aligned_in_smp
+#else
+#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \
+ DEFINE_PER_CPU(type, name)
+#endif
+
+#define DEFINE_PER_CPU_FIRST(type, name) \
+ __attribute__((__section__(".data.percpu.first"))) \
+ PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
+
+#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
+#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
+
/* Enough to cover all DEFINE_PER_CPUs in kernel, including modules. */
#ifndef PERCPU_ENOUGH_ROOM
#ifdef CONFIG_MODULES
Index: linux-x86.q/init/main.c
===================================================================
--- linux-x86.q.orig/init/main.c
+++ linux-x86.q/init/main.c
@@ -363,28 +363,29 @@ static inline void smp_prepare_cpus(unsi
#else
-#ifdef __GENERIC_PER_CPU
+#ifndef CONFIG_ARCH_SETS_UP_PER_CPU_AREA
unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
EXPORT_SYMBOL(__per_cpu_offset);
static void __init setup_per_cpu_areas(void)
{
- unsigned long size, i;
- char *ptr;
- unsigned long nr_possible_cpus = num_possible_cpus();
+ unsigned long size;
+ int cpu;
/* Copy section for each CPU (we discard the original) */
size = ALIGN(PERCPU_ENOUGH_ROOM, PAGE_SIZE);
- ptr = alloc_bootmem_pages(size * nr_possible_cpus);
- for_each_possible_cpu(i) {
- __per_cpu_offset[i] = ptr - __per_cpu_start;
- memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
- ptr += size;
+ for_each_possible_cpu(cpu) {
+ char *ptr;
+
+ ptr = alloc_bootmem_pages_node(NODE_DATA(cpu_to_node(cpu)),
+ size);
+ __per_cpu_offset[cpu] = ptr - __per_cpu_start;
+ memcpy(ptr, __per_cpu_load, __per_cpu_size);
}
}
-#endif /* !__GENERIC_PER_CPU */
+#endif /* CONFIG_ARCH_SETS_UP_CPU_AREA */
/* Called by boot processor to activate the rest. */
static void __init smp_init(void)
Index: linux-x86.q/kernel/lockdep.c
===================================================================
--- linux-x86.q.orig/kernel/lockdep.c
+++ linux-x86.q/kernel/lockdep.c
@@ -613,8 +613,8 @@ static int static_obj(void *obj)
* percpu var?
*/
for_each_possible_cpu(i) {
- start = (unsigned long) &__per_cpu_start + per_cpu_offset(i);
- end = (unsigned long) &__per_cpu_start + PERCPU_ENOUGH_ROOM
+ start = (unsigned long) __per_cpu_start + per_cpu_offset(i);
+ end = (unsigned long) __per_cpu_start + PERCPU_ENOUGH_ROOM
+ per_cpu_offset(i);
if ((addr >= start) && (addr < end))
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists