Message-ID: <20071208101256.GA25807@rhlx01.hs-esslingen.de>
Date:	Sat, 8 Dec 2007 11:12:57 +0100
From:	Andreas Mohr <andi@...as.de>
To:	Andrew Morton <akpm@...ux-foundation.org>
Cc:	"Rafael J. Wysocki" <rjw@...k.pl>,
	LKML <linux-kernel@...r.kernel.org>,
	Linus Torvalds <torvalds@...ux-foundation.org>,
	Ingo Molnar <mingo@...e.hu>, linux-ide@...r.kernel.org,
	Tejun Heo <htejun@...il.com>
Subject: Re: 2.6.24-rc4-git5: Reported regressions from 2.6.23

Hi,

On Sat, Dec 08, 2007 at 01:36:31AM -0800, Andrew Morton wrote:
> > Subject		: PATA scan: ACPI Exception AE_AML_PACKAGE_LIMIT... is beyond end of object
> > Submitter	: Hans de Bruin <bruinjm@...all.nl>
> > References	: http://bugzilla.kernel.org/show_bug.cgi?id=9320
> > Handled-By	: Robert Moore <Robert.Moore@...el.com>
> > 		  Tejun Heo <htejun@...il.com>
> > 		  Fu Michael <michael.fu@...el.com>
> > Patch		: 
> > 
> 
> A number of other people are seeing the same thing and Tejun is putting in
> a blacklist of machines which cannot use libata+acpi.  That patch is not
> yet in any git tree which I pull.
> 
> AFACIT the machines kepe working OK - there's just some nasty dmesg spew.
> 
> If any machines _are_ breaking then this could cause real problems and I'd
> prefer that we either go for a whitelist or arrange to detect the condition
> and fall back to non-acpi ata.

Does this report now win me the lucky draw, pretty please? ;)

STD regression rc1 -> rc234, suspend fails completely, recovering is
pretty much useless since HDD is DEAD from this point on anyway.
Managed to capture -rc2 suspend logging via still-alive ssh session.

2.6.24-rc1 suspend/resume log, successful (well, a couple seconds delay, most likely due to
well-recovered AML failure):

swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
Shrinking memory... done (0 pages freed)
Freed 0 kbytes in 0.02 seconds (0.00 MB/s)
Suspending console(s)
hub 4-0:1.0: hub_suspend
usb usb4: bus suspend
ehci_hcd 0000:00:10.3: suspend root hub
hub 3-0:1.0: hub_suspend
usb usb3: bus suspend
usb usb3: suspend_rh
hub 2-0:1.0: hub_suspend
usb usb2: bus suspend
usb usb2: suspend_rh
hub 1-0:1.0: hub_suspend
usb usb1: bus suspend
usb usb1: suspend_rh
sd 0:0:0:0: [sda] Synchronizing SCSI cache
parport_pc 00:09: disabled
serial 00:08: disabled
serial 00:07: disabled
ACPI: PCI interrupt for device 0000:00:11.5 disabled
ACPI handle has no context!
ACPI: PCI interrupt for device 0000:00:11.1 disabled
ACPI: PCI interrupt for device 0000:00:10.3 disabled
ehci_hcd 0000:00:10.3: --> PCI D3/wakeup
uhci_hcd 0000:00:10.2: uhci_suspend
ACPI: PCI interrupt for device 0000:00:10.2 disabled
uhci_hcd 0000:00:10.2: --> PCI D3
uhci_hcd 0000:00:10.1: uhci_suspend
ACPI: PCI interrupt for device 0000:00:10.1 disabled
uhci_hcd 0000:00:10.1: --> PCI D3
uhci_hcd 0000:00:10.0: uhci_suspend
ACPI: PCI interrupt for device 0000:00:10.0 disabled
uhci_hcd 0000:00:10.0: --> PCI D3
ACPI: PCI interrupt for device 0000:00:0d.0 disabled
ACPI handle has no context!
ACPI: PCI interrupt for device 0000:00:0c.0 disabled
ACPI handle has no context!
pci_set_power_state(): 0000:00:00.0: state=3, current state=5
swsusp: critical section:
swsusp: Need to copy 51195 pages
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
evxfevnt-0079 [00] enable                : System is already in ACPI mode
ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
evxfevnt-0079 [00] enable                : System is already in ACPI mode
ACPI: Unable to turn cooling device [c180ff60] 'off'
PCI: Setting latency timer of device 0000:00:01.0 to 64
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[db140000-db1407ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18
e100: eth-intel: e100_watchdog: link up, 100Mbps, full-duplex
PM: Writing back config space on device 0000:00:0d.0 at offset 1 (was 2100007, writing 2100003)
ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 19 (level, low) -> IRQ 22
uhci_hcd 0000:00:10.0: PCI D0, from previous PCI D3
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 20
uhci_hcd 0000:00:10.0: uhci_resume
uhci_hcd 0000:00:10.0: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:10.0: Performing full reset
usb usb1: root hub lost power or was reset
usb usb1: suspend_rh
uhci_hcd 0000:00:10.1: PCI D0, from previous PCI D3
ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 20
uhci_hcd 0000:00:10.1: uhci_resume
uhci_hcd 0000:00:10.1: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:10.1: Performing full reset
usb usb2: root hub lost power or was reset
usb usb2: suspend_rh
uhci_hcd 0000:00:10.2: PCI D0, from previous PCI D3
ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 20
uhci_hcd 0000:00:10.2: uhci_resume
uhci_hcd 0000:00:10.2: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:10.2: Performing full reset
usb usb3: root hub lost power or was reset
usb usb3: suspend_rh
ehci_hcd 0000:00:10.3: PCI D0, from previous PCI D3
ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 20
PM: Writing back config space on device 0000:00:10.3 at offset 3 (was 2008, writing 2010)
PM: Writing back config space on device 0000:00:10.3 at offset 1 (was 2100007, writing 2100017)
PM: Writing back config space on device 0000:00:11.1 at offset 1 (was 2900003, writing 2900007)
ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:11.5 to 64
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
serial 00:07: activated
serial 00:08: activated
parport_pc 00:09: activated
i8042 aux 00:0a: activation failed
i8042 kbd 00:0b: activation failed
sd 0:0:0:0: [sda] Starting disk
ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFF) is beyond end of object [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.GTF_] (Node c180b990), AE_AML_PACKAGE_LIMIT
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV1._GTF] (Node c180b888), AE_AML_PACKAGE_LIMIT
ata1.01: _GTF evaluation failed (AE 0x300d)
ata1.01: revalidation failed (errno=-5)
ata1: failed to recover some devices, retrying in 5 secs
ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFF) is beyond end of object [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.GTF_] (Node c180b990), AE_AML_PACKAGE_LIMIT
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV1._GTF] (Node c180b888), AE_AML_PACKAGE_LIMIT
ata1.01: _GTF evaluation failed (AE 0x300d)
ata1.01: ACPI on devcfg failed the second time, disabling (errno=-5)
ata1.01: revalidation failed (errno=1)
ata1: failed to recover some devices, retrying in 5 secs
ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFF) is beyond end of object [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.GTF_] (Node c180b990), AE_AML_PACKAGE_LIMIT
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c180b840), AE_AML_PACKAGE_LIMIT
ata1.00: _GTF evaluation failed (AE 0x300d)
ata1.00: revalidation failed (errno=-5)
ata1: failed to recover some devices, retrying in 5 secs
ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFF) is beyond end of object [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.GTF_] (Node c180b990), AE_AML_PACKAGE_LIMIT
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c180b840), AE_AML_PACKAGE_LIMIT
ata1.00: _GTF evaluation failed (AE 0x300d)
ata1.00: ACPI on devcfg failed the second time, disabling (errno=-5)
ata1.00: revalidation failed (errno=1)
ata1: failed to recover some devices, retrying in 5 secs
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/33
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb usb1: usb resume
usb usb1: wakeup_rh
hub 1-0:1.0: trying to enable port power on non-switchable hub
usb usb2: usb resume
usb usb2: wakeup_rh
hub 2-0:1.0: trying to enable port power on non-switchable hub
usb usb3: usb resume
usb usb3: wakeup_rh
hub 3-0:1.0: trying to enable port power on non-switchable hub
usb usb4: usb resume
ehci_hcd 0000:00:10.3: resume root hub
hub 4-0:1.0: hub_resume
Restarting tasks ... <7>hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0006
uhci_hcd 0000:00:10.0: port 1 portsc 018a,00
hub 1-0:1.0: port 1, status 0300, change 0003, 1.5 Mb/s
done.
swsusp: Basic memory bitmaps freed
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x300
uhci_hcd 0000:00:10.0: port 2 portsc 008a,00
hub 1-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0006
uhci_hcd 0000:00:10.1: port 1 portsc 018a,00
hub 2-0:1.0: port 1, status 0300, change 0003, 1.5 Mb/s
hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x300
uhci_hcd 0000:00:10.1: port 2 portsc 008a,00
hub 2-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0006
uhci_hcd 0000:00:10.2: port 1 portsc 008a,00
hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
uhci_hcd 0000:00:10.2: port 2 portsc 008a,00
hub 3-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000
hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
usb usb1: suspend_rh (auto-stop)
usb usb2: suspend_rh (auto-stop)
usb usb3: suspend_rh (auto-stop)
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[drm] Loading R200 Microcode



2.6.24-rc2 suspend log (one screenful), UNSUCCESSFUL:

serial 00:07: disabled
ACPI: PCI interrupt for device 0000:00:11.5 disabled
ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFF) is beyond end of object [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.GTM_]
(Node c180b9a8), AE_AML_PACKAGE_LIMIT
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1._GTM] (Node c180b8d0), AE_AML_PACKAGE_LIMIT
ata2: ACPI get timing mode failed (AE 0x300d)
pci_device_suspend(): ata_pci_device_suspend+0x0/0x40() returns -22
suspend_device(): pci_device_suspend+0x0/0x70() returns -22
Could not suspend device 0000:00:11.1: error -22
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 23
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
serial 00:07: activated
serial 00:08: activated
parport_pc 00:09: activated
i8042 aux 00:0a: activation failed
i8042 kbd 00:0b: activation failed
sd 0:0:0:0: [sda] Starting disk
sd 0:0:0:0: timing out command, waited 180s
sd 0:0:0:0: [sda] START_STOP FAILED
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Restarting tasks ... <7>hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
done.
swsusp: Basic memory bitmaps freed
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
Syncing filesystems ...



# lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP]
00:09.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46)
00:0a.0 Multimedia audio controller: Aureal Semiconductor Vortex 2 (rev fe)
00:0c.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 08)
00:0d.0 Multimedia audio controller: Aztech System Ltd 3328 Audio (rev 10)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV250 If [Radeon 9000] (rev 01)
01:00.1 Display controller: ATI Technologies Inc Radeon RV250 [Radeon 9000] (Secondary) (rev 01)


# dmidecode 2.9
SMBIOS 2.2 present.
39 structures occupying 1035 bytes.
Table at 0x000F0800.

Handle 0x0000, DMI type 0, 19 bytes
BIOS Information
        Vendor: Award Software International, Inc.
        Version: 6.00 PG
        Release Date: 09/16/2003
        Address: 0xE0000
        Runtime Size: 128 kB
        ROM Size: 512 kB
        Characteristics:
                ISA is supported
                PCI is supported
                PNP is supported
                APM is supported
                BIOS is upgradeable
                BIOS shadowing is allowed
                ESCD support is available
                Boot from CD is supported
                Selectable boot is supported
                BIOS ROM is socketed
                EDD is supported
                5.25"/360 KB floppy services are supported (int 13h)
                5.25"/1.2 MB floppy services are supported (int 13h)
                3.5"/720 KB floppy services are supported (int 13h)
                3.5"/2.88 MB floppy services are supported (int 13h)
                Print screen service is supported (int 5h)
                8042 keyboard services are supported (int 9h)
                Serial services are supported (int 14h)
                Printer services are supported (int 17h)
                CGA/mono video services are supported (int 10h)
                ACPI is supported
                USB legacy is supported
                AGP is supported
                LS-120 boot is supported
                ATAPI Zip drive boot is supported

Handle 0x0001, DMI type 1, 25 bytes
System Information
        Manufacturer: VIA Technologies, Inc.
        Product Name: VT8367-8235
        Version:
        Serial Number:
        UUID: Not Present
        Wake-up Type: Power Switch

Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
        Manufacturer:
        Product Name: VT8367-8235
        Version:
        Serial Number:

Handle 0x0003, DMI type 3, 13 bytes
Chassis Information
        Manufacturer:
        Type: Desktop
        Lock: Not Present
        Version:
        Serial Number:
        Asset Tag:
        Boot-up State: Unknown
        Power Supply State: Unknown
        Thermal State: Unknown
        Security Status: Unknown

Handle 0x0004, DMI type 4, 32 bytes
Processor Information
        Socket Designation: Socket A
        Type: Central Processor
        Family: Duron
        Manufacturer: AMD
        ID: 81 06 00 00 FF FB 83 03
        Signature: Family 6, Model 8, Stepping 1
        Flags:
                FPU (Floating-point unit on-chip)
                VME (Virtual mode extension)
                DE (Debugging extension)
                PSE (Page size extension)
                TSC (Time stamp counter)
                MSR (Model specific registers)
                PAE (Physical address extension)
                MCE (Machine check exception)
                CX8 (CMPXCHG8 instruction supported)
                APIC (On-chip APIC hardware supported)
                SEP (Fast system call)
                MTRR (Memory type range registers)
                PGE (Page global enable)
                MCA (Machine check architecture)
                CMOV (Conditional move instruction supported)
                PAT (Page attribute table)
                PSE-36 (36-bit page size extension)
                MMX (MMX technology supported)
                FXSR (Fast floating-point save and restore)
                SSE (Streaming SIMD extensions)
        Version: AMD K7 processor
        Voltage: 3.3 V
        External Clock: 133 MHz
        Max Speed: 1500 MHz
        Current Speed: 1200 MHz
        Status: Populated, Enabled
        Upgrade: ZIF Socket
        L1 Cache Handle: 0x000A
        L2 Cache Handle: 0x000B
        L3 Cache Handle: No L3 Cache

Handle 0x0005, DMI type 5, 24 bytes
Memory Controller Information
        Error Detecting Method: None
        Error Correcting Capabilities:
                None
        Supported Interleave: One-way Interleave
        Current Interleave: Four-way Interleave
        Maximum Memory Module Size: 32 MB
        Maximum Total Memory Size: 128 MB
        Supported Speeds:
                70 ns
                60 ns
        Supported Memory Types:
                Standard
                EDO
        Memory Module Voltage: 5.0 V
        Associated Memory Slots: 4
                0x0006
                0x0007
                0x0008
                0x0009
        Enabled Error Correcting Capabilities: None

.
.
.


# hdparm -i /dev/sda

/dev/sda:

 Model=WDC WD1200JB-00CRA1                     , FwRev=17.07W17, SerialNo=WD-WCA8C4285629
 Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
 RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=40
 BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=?16?
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=234441648
 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio1 pio2 pio3 pio4
 DMA modes:  mdma0 mdma1 mdma2
 UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
 AdvancedPM=no WriteCache=enabled
 Drive conforms to: Unspecified:  ATA/ATAPI-1,2,3,4,5

 * signifies the current active mode



Athlon on EPOX 8K5A2+ board.



Again, 2.6.23 and 2.6.24-rc1 work, yet 2.6.24 -rc2, -rc3 and -rc4 FAIL.

Probably won't be able to do any reporting over the weekend (WOL is
inoperable ATM for some weird reason), let me know what you need.
Took too much time to gather this report already anyway ;)

Thanks,

Andreas Mohr
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists