[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <11981938363358@kroah.org>
Date: Thu, 20 Dec 2007 15:37:16 -0800
From: <gregkh@...e.de>
To: benh@...nel.crashing.org, greg@...ah.com, gregkh@...e.de,
linux-kernel@...r.kernel.org, linuxppc-dev@...abs.org
Subject: patch pci-fix-bus-resource-assignment-on-32-bits-with-64b-resources.patch added to gregkh-2.6 tree
This is a note to let you know that I've just added the patch titled
Subject: PCI: Fix bus resource assignment on 32 bits with 64b resources
to my gregkh-2.6 tree. Its filename is
pci-fix-bus-resource-assignment-on-32-bits-with-64b-resources.patch
This tree can be found at
http://www.kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/patches/
>From benh@...abs.org Sun Dec 9 22:32:23 2007
From: Benjamin Herrenschmidt <benh@...nel.crashing.org>
Date: Mon, 10 Dec 2007 17:32:15 +1100
Subject: PCI: Fix bus resource assignment on 32 bits with 64b resources
To: Greg Kroah-Hartman <greg@...ah.com>
Cc: linux-pci@...ey.karlin.mff.cuni.cz, <linuxppc-dev@...abs.org>, <linux-kernel@...r.kernel.org>
Message-ID: <20071210063216.89DBBDDE1E@...abs.org>
The current pci_assign_unassigned_resources() code doesn't work properly
on 32 bits platforms with 64 bits resources. The main reason is the use
of unsigned long in various places instead of resource_size_t.
This fixes it, along with some tricks to avoid casting to 64 bits on
platforms that don't need it in every printk around.
This is a pre-requisite for making powerpc use the generic code instead of
its own half-useful implementation.
Signed-off-by: Benjamin Herrenschmidt <benh@...nel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...e.de>
---
drivers/pci/setup-bus.c | 64 ++++++++++++++++++++++++++++++------------------
include/linux/pci.h | 4 +--
2 files changed, 42 insertions(+), 26 deletions(-)
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -89,8 +89,9 @@ void pci_setup_cardbus(struct pci_bus *b
* The IO resource is allocated a range twice as large as it
* would normally need. This allows us to set both IO regs.
*/
- printk(" IO window: %08lx-%08lx\n",
- region.start, region.end);
+ printk(KERN_INFO " IO window: 0x%08lx-0x%08lx\n",
+ (unsigned long)region.start,
+ (unsigned long)region.end);
pci_write_config_dword(bridge, PCI_CB_IO_BASE_0,
region.start);
pci_write_config_dword(bridge, PCI_CB_IO_LIMIT_0,
@@ -99,8 +100,9 @@ void pci_setup_cardbus(struct pci_bus *b
pcibios_resource_to_bus(bridge, ®ion, bus->resource[1]);
if (bus->resource[1]->flags & IORESOURCE_IO) {
- printk(" IO window: %08lx-%08lx\n",
- region.start, region.end);
+ printk(KERN_INFO " IO window: 0x%08lx-0x%08lx\n",
+ (unsigned long)region.start,
+ (unsigned long)region.end);
pci_write_config_dword(bridge, PCI_CB_IO_BASE_1,
region.start);
pci_write_config_dword(bridge, PCI_CB_IO_LIMIT_1,
@@ -109,8 +111,9 @@ void pci_setup_cardbus(struct pci_bus *b
pcibios_resource_to_bus(bridge, ®ion, bus->resource[2]);
if (bus->resource[2]->flags & IORESOURCE_MEM) {
- printk(" PREFETCH window: %08lx-%08lx\n",
- region.start, region.end);
+ printk(KERN_INFO " PREFETCH window: 0x%08lx-0x%08lx\n",
+ (unsigned long)region.start,
+ (unsigned long)region.end);
pci_write_config_dword(bridge, PCI_CB_MEMORY_BASE_0,
region.start);
pci_write_config_dword(bridge, PCI_CB_MEMORY_LIMIT_0,
@@ -119,8 +122,9 @@ void pci_setup_cardbus(struct pci_bus *b
pcibios_resource_to_bus(bridge, ®ion, bus->resource[3]);
if (bus->resource[3]->flags & IORESOURCE_MEM) {
- printk(" MEM window: %08lx-%08lx\n",
- region.start, region.end);
+ printk(KERN_INFO " MEM window: 0x%08lx-0x%08lx\n",
+ (unsigned long)region.start,
+ (unsigned long)region.end);
pci_write_config_dword(bridge, PCI_CB_MEMORY_BASE_1,
region.start);
pci_write_config_dword(bridge, PCI_CB_MEMORY_LIMIT_1,
@@ -145,7 +149,7 @@ pci_setup_bridge(struct pci_bus *bus)
{
struct pci_dev *bridge = bus->self;
struct pci_bus_region region;
- u32 l, io_upper16;
+ u32 l, bu, lu, io_upper16;
DBG(KERN_INFO "PCI: Bridge: %s\n", pci_name(bridge));
@@ -159,7 +163,8 @@ pci_setup_bridge(struct pci_bus *bus)
/* Set up upper 16 bits of I/O base/limit. */
io_upper16 = (region.end & 0xffff0000) | (region.start >> 16);
DBG(KERN_INFO " IO window: %04lx-%04lx\n",
- region.start, region.end);
+ (unsigned long)region.start,
+ (unsigned long)region.end);
}
else {
/* Clear upper 16 bits of I/O base/limit. */
@@ -180,8 +185,9 @@ pci_setup_bridge(struct pci_bus *bus)
if (bus->resource[1]->flags & IORESOURCE_MEM) {
l = (region.start >> 16) & 0xfff0;
l |= region.end & 0xfff00000;
- DBG(KERN_INFO " MEM window: %08lx-%08lx\n",
- region.start, region.end);
+ DBG(KERN_INFO " MEM window: 0x%08lx-0x%08lx\n",
+ (unsigned long)region.start,
+ (unsigned long)region.end);
}
else {
l = 0x0000fff0;
@@ -195,12 +201,18 @@ pci_setup_bridge(struct pci_bus *bus)
pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, 0);
/* Set up PREF base/limit. */
+ bu = lu = 0;
pcibios_resource_to_bus(bridge, ®ion, bus->resource[2]);
if (bus->resource[2]->flags & IORESOURCE_PREFETCH) {
l = (region.start >> 16) & 0xfff0;
l |= region.end & 0xfff00000;
- DBG(KERN_INFO " PREFETCH window: %08lx-%08lx\n",
- region.start, region.end);
+#ifdef CONFIG_RESOURCES_64BIT
+ bu = region.start >> 32;
+ lu = region.end >> 32;
+#endif
+ DBG(KERN_INFO " PREFETCH window: 0x%016llx-0x%016llx\n",
+ (unsigned long long)region.start,
+ (unsigned long long)region.end);
}
else {
l = 0x0000fff0;
@@ -208,8 +220,9 @@ pci_setup_bridge(struct pci_bus *bus)
}
pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, l);
- /* Clear out the upper 32 bits of PREF base. */
- pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, 0);
+ /* Set the upper 32 bits of PREF base & limit. */
+ pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, bu);
+ pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, lu);
pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, bus->bridge_ctl);
}
@@ -323,8 +336,8 @@ static void pbus_size_io(struct pci_bus
static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, unsigned long type)
{
struct pci_dev *dev;
- unsigned long min_align, align, size;
- unsigned long aligns[12]; /* Alignments from 1Mb to 2Gb */
+ resource_size_t min_align, align, size;
+ resource_size_t aligns[12]; /* Alignments from 1Mb to 2Gb */
int order, max_order;
struct resource *b_res = find_free_bus_resource(bus, type);
@@ -340,7 +353,7 @@ static int pbus_size_mem(struct pci_bus
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
struct resource *r = &dev->resource[i];
- unsigned long r_size;
+ resource_size_t r_size;
if (r->parent || (r->flags & mask) != type)
continue;
@@ -350,10 +363,10 @@ static int pbus_size_mem(struct pci_bus
order = __ffs(align) - 20;
if (order > 11) {
printk(KERN_WARNING "PCI: region %s/%d "
- "too large: %llx-%llx\n",
+ "too large: 0x%016llx-0x%016llx\n",
pci_name(dev), i,
- (unsigned long long)r->start,
- (unsigned long long)r->end);
+ (unsigned long long)r->start,
+ (unsigned long long)r->end);
r->flags = 0;
continue;
}
@@ -372,8 +385,11 @@ static int pbus_size_mem(struct pci_bus
align = 0;
min_align = 0;
for (order = 0; order <= max_order; order++) {
- unsigned long align1 = 1UL << (order + 20);
-
+#ifdef CONFIG_RESOURCES_64BIT
+ resource_size_t align1 = 1ULL << (order + 20);
+#else
+ resource_size_t align1 = 1U << (order + 20);
+#endif
if (!align)
min_align = align1;
else if (ALIGN(align + min_align, min_align) < align1)
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -309,8 +309,8 @@ struct pci_raw_ops {
extern struct pci_raw_ops *raw_pci_ops;
struct pci_bus_region {
- unsigned long start;
- unsigned long end;
+ resource_size_t start;
+ resource_size_t end;
};
struct pci_dynids {
Patches currently in gregkh-2.6 which might be from benh@...nel.crashing.org are
bad/battery-class-driver.patch
driver/adb-convert-from-class_device-to-device.patch
driver/kobject-convert-hvc_console-to-use-kref-not-kobject.patch
driver/kobject-convert-hvcs-to-use-kref-not-kobject.patch
driver/kobject-convert-icom-to-use-kref-not-kobject.patch
pci/pci-fix-bus-resource-assignment-on-32-bits-with-64b-resources.patch
pci/pci-fix-warning-in-setup-res.c-on-32-bit-platforms-with-64-bit-resources.patch
usb/usb-remove-ohci-useless-masking-unmasking-of-wdh-interrupt.patch
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists