| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <11982059621055@kroah.org>
Date: Thu, 20 Dec 2007 18:59:22 -0800
From: <gregkh@...e.de>
To: benh@...nel.crashing.org, alan@...hat.com, bzolnier@...il.com,
greg@...ah.com, gregkh@...e.de, ink@...assic.park.msu.ru,
james.smart@...lex.com, linux-driver@...gic.com,
linux-kernel@...r.kernel.org
Subject: patch pci-remove-users-of-pci_enable_device_bars.patch added to gregkh-2.6 tree
This is a note to let you know that I've just added the patch titled
Subject: PCI: Remove users of pci_enable_device_bars()
to my gregkh-2.6 tree. Its filename is
pci-remove-users-of-pci_enable_device_bars.patch
This tree can be found at
http://www.kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/patches/
>From benh@...abs.org Wed Dec 19 20:30:44 2007
From: Benjamin Herrenschmidt <benh@...nel.crashing.org>
Date: Thu, 20 Dec 2007 15:28:09 +1100
Subject: PCI: Remove users of pci_enable_device_bars()
To: Greg Kroah-Hartman <greg@...ah.com>
Cc: linux-pci@...ey.karlin.mff.cuni.cz, <linux-kernel@...r.kernel.org>, <ink@...assic.park.msu.ru>, Alan Cox <alan@...hat.com>, <james.smart@...lex.com>, <linux-driver@...gic.com>, Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
Message-ID: <20071220042811.D312DDDEE6@...abs.org>
This patch converts users of pci_enable_device_bars() to the new
pci_enable_device_{io,mem} interface.
The new API fits nicely, except maybe for the QLA case where a bit of
code re-organization might be a good idea but I prefer sticking to the
simple patch as I don't have hardware to test on.
I'll also need some feedback on the cs5520 change.
Signed-off-by: Benjamin Herrenschmidt <benh@...nel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...e.de>
---
drivers/ata/pata_cs5520.c | 2 +-
drivers/i2c/busses/scx200_acb.c | 2 +-
drivers/ide/pci/cs5520.c | 10 ++++++++--
drivers/ide/setup-pci.c | 6 ++++--
drivers/scsi/lpfc/lpfc_init.c | 3 +--
drivers/scsi/qla2xxx/qla_os.c | 12 +++++++++---
6 files changed, 24 insertions(+), 11 deletions(-)
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -229,7 +229,7 @@ static int __devinit cs5520_init_one(str
return -ENOMEM;
/* Perform set up for DMA */
- if (pci_enable_device_bars(pdev, 1<<2)) {
+ if (pci_enable_device_io(pdev)) {
printk(KERN_ERR DRV_NAME ": unable to configure BAR2.\n");
return -ENODEV;
}
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -492,7 +492,7 @@ static __init int scx200_create_pci(cons
iface->pdev = pdev;
iface->bar = bar;
- rc = pci_enable_device_bars(iface->pdev, 1 << iface->bar);
+ rc = pci_enable_device_io(iface->pdev);
if (rc)
goto errout_free;
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -160,8 +160,14 @@ static int __devinit cs5520_init_one(str
ide_setup_pci_noise(dev, d);
/* We must not grab the entire device, it has 'ISA' space in its
- BARS too and we will freak out other bits of the kernel */
- if (pci_enable_device_bars(dev, 1<<2)) {
+ * BARS too and we will freak out other bits of the kernel
+ *
+ * pci_enable_device_bars() is going away. I replaced it with
+ * IO only enable for now but I'll need confirmation this is
+ * allright for that device. If not, it will need some kind of
+ * quirk. --BenH.
+ */
+ if (pci_enable_device_io(dev)) {
printk(KERN_WARNING "%s: Unable to enable 55x0.\n", d->name);
return -ENODEV;
}
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -236,7 +236,9 @@ EXPORT_SYMBOL_GPL(ide_setup_pci_noise);
* @d: IDE port info
*
* Enable the IDE PCI device. We attempt to enable the device in full
- * but if that fails then we only need BAR4 so we will enable that.
+ * but if that fails then we only need IO space. The PCI code should
+ * have setup the proper resources for us already for controllers in
+ * legacy mode.
*
* Returns zero on success or an error code
*/
@@ -246,7 +248,7 @@ static int ide_pci_enable(struct pci_dev
int ret;
if (pci_enable_device(dev)) {
- ret = pci_enable_device_bars(dev, 1 << 4);
+ ret = pci_enable_device_io(dev);
if (ret < 0) {
printk(KERN_WARNING "%s: (ide_setup_pci_device:) "
"Could not enable device.\n", d->name);
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -2100,10 +2100,9 @@ static pci_ers_result_t lpfc_io_slot_res
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
struct lpfc_sli *psli = &phba->sli;
- int bars = pci_select_bars(pdev, IORESOURCE_MEM);
dev_printk(KERN_INFO, &pdev->dev, "recovering from a slot reset.\n");
- if (pci_enable_device_bars(pdev, bars)) {
+ if (pci_enable_device_mem(pdev)) {
printk(KERN_ERR "lpfc: Cannot re-enable "
"PCI device after reset.\n");
return PCI_ERS_RESULT_DISCONNECT;
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1583,7 +1583,7 @@ qla2x00_probe_one(struct pci_dev *pdev,
char pci_info[30];
char fw_str[30];
struct scsi_host_template *sht;
- int bars;
+ int bars, mem_only = 0;
bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
sht = &qla2x00_driver_template;
@@ -1594,10 +1594,16 @@ qla2x00_probe_one(struct pci_dev *pdev,
pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2532) {
bars = pci_select_bars(pdev, IORESOURCE_MEM);
sht = &qla24xx_driver_template;
+ mem_only = 1;
}
- if (pci_enable_device_bars(pdev, bars))
- goto probe_out;
+ if (mem_only) {
+ if (pci_enable_device_mem(pdev))
+ goto probe_out;
+ } else {
+ if (pci_enable_device(pdev))
+ goto probe_out;
+ }
if (pci_find_aer_capability(pdev))
if (pci_enable_pcie_error_reporting(pdev))
Patches currently in gregkh-2.6 which might be from benh@...nel.crashing.org are
bad/battery-class-driver.patch
driver/adb-convert-from-class_device-to-device.patch
driver/kobject-convert-hvc_console-to-use-kref-not-kobject.patch
driver/kobject-convert-hvcs-to-use-kref-not-kobject.patch
driver/kobject-convert-icom-to-use-kref-not-kobject.patch
pci/pci-fix-bus-resource-assignment-on-32-bits-with-64b-resources.patch
pci/pci-fix-warning-in-setup-res.c-on-32-bit-platforms-with-64-bit-resources.patch
pci/pci-add-pci_enable_device_-io-mem-intefaces.patch
pci/pci-remove-pci_enable_device_bars.patch
pci/pci-remove-users-of-pci_enable_device_bars.patch
usb/usb-remove-ohci-useless-masking-unmasking-of-wdh-interrupt.patch
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists