linux-kernel - Re: JMicron PATA 2.6.24-rc7 can't find drives

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <4798A537.9000104@gmail.com>
Date:	Thu, 24 Jan 2008 15:48:23 +0100
From:	Marcin Gil <marcin.gil@...il.com>
To:	Lennart Sorensen <lsorense@...lub.uwaterloo.ca>
CC:	Alan Cox <alan@...rguk.ukuu.org.uk>, linux-kernel@...r.kernel.org
Subject: Re: JMicron PATA 2.6.24-rc7 can't find drives

Lennart Sorensen wrote:
> On Thu, Jan 24, 2008 at 03:30:44PM +0100, Marcin Gil wrote:
>> This is not a problem. I've posted (in original mail) that DVD is found 
>> fine (and linked as /dev/cdrom). But I have a Maxtor HDD on the same 
>> ide-tape and it is not detected at all.
> 
> Are you using an 80 pin IDE cable and are both drives set to cable
> select (usually preferable) or is one master and one slave?
> 
Yes, this is 80-wire cable; both are connected on the same cable. HDD is 
master and DVD is slave. I'll later try disconnecting DVD and see what 
happens. I didn't set cable-select due to how these drives are connected

+-----+-----+
mobo  hdd   dvd

I think that cable select would take dvd as master and hdd as slave.
This was not preferable when hdd was my primary drive. I can try 
cable-select now since I boot off new SATA drive.

Thank you,
-Marcin Gil

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/