[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20080124145132.GE16171@csclub.uwaterloo.ca>
Date: Thu, 24 Jan 2008 09:51:32 -0500
From: lsorense@...lub.uwaterloo.ca (Lennart Sorensen)
To: Marcin Gil <marcin.gil@...il.com>
Cc: Alan Cox <alan@...rguk.ukuu.org.uk>, linux-kernel@...r.kernel.org
Subject: Re: JMicron PATA 2.6.24-rc7 can't find drives
On Thu, Jan 24, 2008 at 03:48:23PM +0100, Marcin Gil wrote:
> Yes, this is 80-wire cable; both are connected on the same cable. HDD is
> master and DVD is slave. I'll later try disconnecting DVD and see what
> happens. I didn't set cable-select due to how these drives are connected
>
> +-----+-----+
> mobo hdd dvd
>
> I think that cable select would take dvd as master and hdd as slave.
> This was not preferable when hdd was my primary drive. I can try
> cable-select now since I boot off new SATA drive.
Does the BIOS see the HD on the jmicron when doing disk detection?
I remember once forgetting to connect power to a driver and spending a
while wondering why the drive wasn't showing up anywhere.
--
Len Sorensen
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists