[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <47A356C3.3010904@garzik.org>
Date: Fri, 01 Feb 2008 12:28:35 -0500
From: Jeff Garzik <jeff@...zik.org>
To: Tejun Heo <htejun@...il.com>
CC: IDE/ATA development list <linux-ide@...r.kernel.org>,
Mark Lord <liml@....ca>, Alan Cox <alan@...rguk.ukuu.org.uk>,
Sam Ravnborg <sam@...nborg.org>,
Andrew Morton <akpm@...ux-foundation.org>,
LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH #upstream] libata: implement libata.force module parameter
Tejun Heo wrote:
> This patch implements libata.force module parameter which can
> selectively override ATA port, link and device configurations
> including cable type, SATA PHY SPD limit, transfer mode and NCQ.
>
> For example, you can say "use 1.5Gbps for all fan-out ports attached
> to the second port but allow 3.0Gbps for the PMP device itself, oh,
> the device attached to the third fan-out port chokes on NCQ and
> shouldn't go over UDMA4" by the following.
>
> libata.force=2:1.5g,2.15:3.0g,2.03:noncq,udma4
>
> Signed-off-by: Tejun Heo <htejun@...il.com>
> ---
> I guess it's about time we add something like this. More than
> anything else this should help debugging and can serve as a last
> resort to work around problems.
>
> Thanks.
>
> Documentation/kernel-parameters.txt | 35 +++
> drivers/ata/libata-core.c | 375 +++++++++++++++++++++++++++++++++++-
> drivers/ata/libata-eh.c | 8
> drivers/ata/libata.h | 1
> 4 files changed, 415 insertions(+), 4 deletions(-)
ACK, but it breaks the build due to section type conflicts:
drivers/ata/libata-core.c:108: error: ata_force_param_buf causes a
section type conflict
Given that the data is marked __initdata and the code is marked __init,
I cannot see the problem.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists