| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <47BD9588.9080803@compro.net> Date: Thu, 21 Feb 2008 10:15:20 -0500 From: Mark Hounschell <markh@...pro.net> To: linux-scsi@...r.kernel.org CC: linux-kernel@...r.kernel.org Subject: New 2.6.24.2 SG_IO SCSI problems I seem to have run into some sort of regression in the SG_IO interface of 2.6.24.2. I have an application that up until 2.6.24 worked fine. The 2.6.23.16 kernel works fine. During reads I get these kernel messages. Writes and other functions _seem_ OK. Actually basic reads are working. Its with large BC reads using an io_vec list that the problem shows up. Feb 21 09:27:51 harley kernel: (scsi1:A:2:0): data overrun detected in Data-in phase. Tag == 0x1. Feb 21 09:27:51 harley kernel: (scsi1:A:2:0): Have seen Data Phase. Length = 256. NumSGs = 1. Feb 21 09:27:51 harley kernel: sg[0] - Addr 0x06256100 : Length 256 Feb 21 09:27:51 harley kernel: (scsi1:A:2:0): data overrun detected in Data-in phase. Tag == 0x1. Feb 21 09:27:51 harley kernel: (scsi1:A:2:0): Have seen Data Phase. Length = 256. NumSGs = 1. Feb 21 09:27:51 harley kernel: sg[0] - Addr 0x06256100 : Length 256 Feb 21 09:27:51 harley kernel: (scsi1:A:2:0): data overrun detected in Data-in phase. Tag == 0x1. Feb 21 09:27:51 harley kernel: (scsi1:A:2:0): Have seen Data Phase. Length = 256. NumSGs = 1. Feb 21 09:27:51 harley kernel: sg[0] - Addr 0x06256100 : Length 256 Feb 21 09:27:51 harley kernel: (scsi1:A:2:0): data overrun detected in Data-in phase. Tag == 0x1. Feb 21 09:27:51 harley kernel: (scsi1:A:2:0): Have seen Data Phase. Length = 256. NumSGs = 1. Feb 21 09:27:51 harley kernel: sg[0] - Addr 0x06256100 : Length 256 . . . . . . The status elements of the sg_io_hdr_t structure used in the application returns status = 0x0 msg_status 0x0 host_status = 0x7 driver_status = 0x0 The hardware in use on this particular machine is an simple Adaptec AHA-2930CU talking to an old IMPRIMIS 94601-15 1.2GB disk drive. Again, all this works fine with the 2.6.23.11 kernel Any help would be appreciated Regards Mark Hounschell -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists