| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20080224183300.037fa9c8@ephemeral>
Date: Sun, 24 Feb 2008 18:33:00 -0500
From: Andres Salomon <dilinger@...ued.net>
To: Thomas Gleixner <tglx@...utronix.de>
Cc: jordan.crouse@....com, linux-kernel@...r.kernel.org,
info-linux@...de.amd.com, mingo@...hat.com, hpa@...or.com,
akpm@...ux-foundation.org
Subject: [PATCH] x86: geode: MSR cleanup
Note that I didn't bother cleaning up the gxfb and lxfb headers wrt MSRs;
that's coming in another patch (which is still in progress).
>From 22b8ddf47f77f01a59afb937779f4c83e9862f9e Mon Sep 17 00:00:00 2001
From: Andres Salomon <dilinger@...ian.org>
Date: Sun, 24 Feb 2008 13:14:57 -0500
Subject: [PATCH] x86: geode: MSR cleanup
This cleans up a few MSR-using drivers in the following manner:
- Ensures MSRs are all defined in asm/geode.h, rather than in misc
places
- Makes the naming consistent; cs553[56] ones begin with MSR_,
GX-specific ones start with MSR_GX_, and LX-specific ones start
with MSR_LX_. Also, make the names match the data sheet.
- Use MSR names rather than numbers in source code
- Document the fact that the LX's MSR_PADSEL has the wrong value
in the data sheet. That's, uh, good to note.
Signed-off-by: Andres Salomon <dilinger@...ian.org>
---
arch/x86/kernel/mfgpt_32.c | 8 ++++----
drivers/video/geode/display_gx.h | 1 -
drivers/video/geode/gxfb_core.c | 3 ++-
drivers/video/geode/lxfb.h | 8 --------
drivers/video/geode/lxfb_ops.c | 19 ++++++++++---------
drivers/video/geode/video_gx.c | 5 +++--
drivers/video/geode/video_gx.h | 3 ---
include/asm-x86/geode.h | 16 +++++++++++++---
8 files changed, 32 insertions(+), 31 deletions(-)
diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c
index 027fc06..5be53fd 100644
--- a/arch/x86/kernel/mfgpt_32.c
+++ b/arch/x86/kernel/mfgpt_32.c
@@ -62,7 +62,7 @@ static int __init mfgpt_fix(char *s)
/* The following udocumented bit resets the MFGPT timers */
val = 0xFF; dummy = 0;
- wrmsr(0x5140002B, val, dummy);
+ wrmsr(MSR_MFGPT_SETUP, val, dummy);
return 1;
}
__setup("mfgptfix", mfgpt_fix);
@@ -126,17 +126,17 @@ int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable)
* 6; that is, resets for 7 and 8 will be ignored. Is this
* a problem? -dilinger
*/
- msr = MFGPT_NR_MSR;
+ msr = MSR_MFGPT_NR;
mask = 1 << (timer + 24);
break;
case MFGPT_EVENT_NMI:
- msr = MFGPT_NR_MSR;
+ msr = MSR_MFGPT_NR;
mask = 1 << (timer + shift);
break;
case MFGPT_EVENT_IRQ:
- msr = MFGPT_IRQ_MSR;
+ msr = MSR_MFGPT_IRQ;
mask = 1 << (timer + shift);
break;
diff --git a/drivers/video/geode/display_gx.h b/drivers/video/geode/display_gx.h
index 0af33f3..df94e4f 100644
--- a/drivers/video/geode/display_gx.h
+++ b/drivers/video/geode/display_gx.h
@@ -17,7 +17,6 @@ int gx_line_delta(int xres, int bpp);
extern struct geode_dc_ops gx_dc_ops;
/* MSR that tells us if a TFT or CRT is attached */
-#define GLD_MSR_CONFIG 0xC0002001
#define GLD_MSR_CONFIG_DM_FP 0x40
/* Display controller registers */
diff --git a/drivers/video/geode/gxfb_core.c b/drivers/video/geode/gxfb_core.c
index 08fa25e..459808f 100644
--- a/drivers/video/geode/gxfb_core.c
+++ b/drivers/video/geode/gxfb_core.c
@@ -30,6 +30,7 @@
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <asm/geode.h>
#include "geodefb.h"
#include "display_gx.h"
@@ -325,7 +326,7 @@ static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *i
/* Figure out if this is a TFT or CRT part */
- rdmsrl(GLD_MSR_CONFIG, val);
+ rdmsrl(MSR_GX_GLD_MSR_CONFIG, val);
if ((val & GLD_MSR_CONFIG_DM_FP) == GLD_MSR_CONFIG_DM_FP)
par->enable_crt = 0;
diff --git a/drivers/video/geode/lxfb.h b/drivers/video/geode/lxfb.h
index ca13c48..8c83a1b 100644
--- a/drivers/video/geode/lxfb.h
+++ b/drivers/video/geode/lxfb.h
@@ -31,14 +31,6 @@ void lx_set_palette_reg(struct fb_info *, unsigned int, unsigned int,
/* MSRS */
-#define MSR_LX_GLD_CONFIG 0x48002001
-#define MSR_LX_GLCP_DOTPLL 0x4c000015
-#define MSR_LX_DF_PADSEL 0x48002011
-#define MSR_LX_DC_SPARE 0x80000011
-#define MSR_LX_DF_GLCONFIG 0x48002001
-
-#define MSR_LX_GLIU0_P2D_RO0 0x10000029
-
#define GLCP_DOTPLL_RESET (1 << 0)
#define GLCP_DOTPLL_BYPASS (1 << 15)
#define GLCP_DOTPLL_HALFPIX (1 << 24)
diff --git a/drivers/video/geode/lxfb_ops.c b/drivers/video/geode/lxfb_ops.c
index 4fbc99b..a52c180 100644
--- a/drivers/video/geode/lxfb_ops.c
+++ b/drivers/video/geode/lxfb_ops.c
@@ -13,6 +13,7 @@
#include <linux/fb.h>
#include <linux/uaccess.h>
#include <linux/delay.h>
+#include <asm/geode.h>
#include "lxfb.h"
@@ -101,7 +102,7 @@ static void lx_set_dotpll(u32 pllval)
u32 dotpll_lo, dotpll_hi;
int i;
- rdmsr(MSR_LX_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
+ rdmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
if ((dotpll_lo & GLCP_DOTPLL_LOCK) && (dotpll_hi == pllval))
return;
@@ -110,7 +111,7 @@ static void lx_set_dotpll(u32 pllval)
dotpll_lo &= ~(GLCP_DOTPLL_BYPASS | GLCP_DOTPLL_HALFPIX);
dotpll_lo |= GLCP_DOTPLL_RESET;
- wrmsr(MSR_LX_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
+ wrmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
/* Wait 100us for the PLL to lock */
@@ -119,7 +120,7 @@ static void lx_set_dotpll(u32 pllval)
/* Now, loop for the lock bit */
for (i = 0; i < 1000; i++) {
- rdmsr(MSR_LX_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
+ rdmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
if (dotpll_lo & GLCP_DOTPLL_LOCK)
break;
}
@@ -127,7 +128,7 @@ static void lx_set_dotpll(u32 pllval)
/* Clear the reset bit */
dotpll_lo &= ~GLCP_DOTPLL_RESET;
- wrmsr(MSR_LX_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
+ wrmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
}
/* Set the clock based on the frequency specified by the current mode */
@@ -255,7 +256,7 @@ static void lx_graphics_enable(struct fb_info *info)
msrlo = DF_DEFAULT_TFT_PAD_SEL_LOW;
msrhi = DF_DEFAULT_TFT_PAD_SEL_HIGH;
- wrmsr(MSR_LX_DF_PADSEL, msrlo, msrhi);
+ wrmsr(MSR_LX_MSR_PADSEL, msrlo, msrhi);
}
if (par->output & OUTPUT_CRT) {
@@ -321,7 +322,7 @@ void lx_set_mode(struct fb_info *info)
/* Set output mode */
- rdmsrl(MSR_LX_DF_GLCONFIG, msrval);
+ rdmsrl(MSR_LX_GLD_MSR_CONFIG, msrval);
msrval &= ~DF_CONFIG_OUTPUT_MASK;
if (par->output & OUTPUT_PANEL) {
@@ -335,7 +336,7 @@ void lx_set_mode(struct fb_info *info)
msrval |= DF_OUTPUT_CRT;
}
- wrmsrl(MSR_LX_DF_GLCONFIG, msrval);
+ wrmsrl(MSR_LX_GLD_MSR_CONFIG, msrval);
/* Clear the various buffers */
/* FIXME: Adjust for panning here */
@@ -383,13 +384,13 @@ void lx_set_mode(struct fb_info *info)
/* Set default watermark values */
- rdmsrl(MSR_LX_DC_SPARE, msrval);
+ rdmsrl(MSR_LX_SPARE_MSR, msrval);
msrval &= ~(DC_SPARE_DISABLE_CFIFO_HGO | DC_SPARE_VFIFO_ARB_SELECT |
DC_SPARE_LOAD_WM_LPEN_MASK | DC_SPARE_WM_LPEN_OVRD |
DC_SPARE_DISABLE_INIT_VID_PRI | DC_SPARE_DISABLE_VFIFO_WM);
msrval |= DC_SPARE_DISABLE_VFIFO_WM | DC_SPARE_DISABLE_INIT_VID_PRI;
- wrmsrl(MSR_LX_DC_SPARE, msrval);
+ wrmsrl(MSR_LX_SPARE_MSR, msrval);
gcfg = DC_GCFG_DFLE; /* Display fifo enable */
gcfg |= 0xB600; /* Set default priority */
diff --git a/drivers/video/geode/video_gx.c b/drivers/video/geode/video_gx.c
index b436155..cfe2c80 100644
--- a/drivers/video/geode/video_gx.c
+++ b/drivers/video/geode/video_gx.c
@@ -16,6 +16,7 @@
#include <asm/io.h>
#include <asm/delay.h>
#include <asm/msr.h>
+#include <asm/geode.h>
#include "geodefb.h"
#include "video_gx.h"
@@ -184,10 +185,10 @@ gx_configure_tft(struct fb_info *info)
/* Set up the DF pad select MSR */
- rdmsrl(GX_VP_MSR_PAD_SELECT, val);
+ rdmsrl(MSR_GX_MSR_PADSEL, val);
val &= ~GX_VP_PAD_SELECT_MASK;
val |= GX_VP_PAD_SELECT_TFT;
- wrmsrl(GX_VP_MSR_PAD_SELECT, val);
+ wrmsrl(MSR_GX_MSR_PADSEL, val);
/* Turn off the panel */
diff --git a/drivers/video/geode/video_gx.h b/drivers/video/geode/video_gx.h
index ce28d8f..d21bca0 100644
--- a/drivers/video/geode/video_gx.h
+++ b/drivers/video/geode/video_gx.h
@@ -14,7 +14,6 @@
extern struct geode_vid_ops gx_vid_ops;
/* GX Flatpanel control MSR */
-#define GX_VP_MSR_PAD_SELECT 0xC0002011
#define GX_VP_PAD_SELECT_MASK 0x3FFFFFFF
#define GX_VP_PAD_SELECT_TFT 0x1FFFFFFF
@@ -59,12 +58,10 @@ extern struct geode_vid_ops gx_vid_ops;
/* Geode GX clock control MSRs */
-#define MSR_GLCP_SYS_RSTPLL 0x4c000014
# define MSR_GLCP_SYS_RSTPLL_DOTPREDIV2 (0x0000000000000002ull)
# define MSR_GLCP_SYS_RSTPLL_DOTPREMULT2 (0x0000000000000004ull)
# define MSR_GLCP_SYS_RSTPLL_DOTPOSTDIV3 (0x0000000000000008ull)
-#define MSR_GLCP_DOTPLL 0x4c000015
# define MSR_GLCP_DOTPLL_DOTRESET (0x0000000000000001ull)
# define MSR_GLCP_DOTPLL_BYPASS (0x0000000000008000ull)
# define MSR_GLCP_DOTPLL_LOCK (0x0000000002000000ull)
diff --git a/include/asm-x86/geode.h b/include/asm-x86/geode.h
index 9e72800..c208398 100644
--- a/include/asm-x86/geode.h
+++ b/include/asm-x86/geode.h
@@ -30,7 +30,11 @@ extern int geode_get_dev_base(unsigned int dev);
/* MSRS */
-#define GX_GLCP_SYS_RSTPLL 0x4C000014
+#define MSR_LX_GLD_MSR_CONFIG 0x48002001
+#define MSR_LX_MSR_PADSEL 0x48002011 /* NOT 0x48000011; the data
+ * sheet has the wrong value */
+#define MSR_GLCP_SYS_RSTPLL 0x4C000014
+#define MSR_GLCP_DOTPLL 0x4C000015
#define MSR_LBAR_SMB 0x5140000B
#define MSR_LBAR_GPIO 0x5140000C
@@ -45,8 +49,14 @@ extern int geode_get_dev_base(unsigned int dev);
#define MSR_PIC_ZSEL_LOW 0x51400022
#define MSR_PIC_ZSEL_HIGH 0x51400023
-#define MFGPT_IRQ_MSR 0x51400028
-#define MFGPT_NR_MSR 0x51400029
+#define MSR_MFGPT_IRQ 0x51400028
+#define MSR_MFGPT_NR 0x51400029
+#define MSR_MFGPT_SETUP 0x5140002B
+
+#define MSR_LX_SPARE_MSR 0x80000011 /* DC-specific */
+
+#define MSR_GX_GLD_MSR_CONFIG 0xC0002001
+#define MSR_GX_MSR_PADSEL 0xC0002011
/* Resource Sizes */
--
1.5.3.7
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists