[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1209573069.4821.3.camel@marge.simson.net>
Date: Wed, 30 Apr 2008 18:31:09 +0200
From: Mike Galbraith <efault@....de>
To: Mauro Carvalho Chehab <mchehab@...radead.org>
Cc: Andrew Morton <akpm@...ux-foundation.org>,
Ingo Molnar <mingo@...e.hu>,
David Miller <davem@...emloft.net>,
torvalds@...ux-foundation.org, linux-dvb-maintainer@...uxtv.org,
video4linux-list@...hat.com, linux-kernel@...r.kernel.org,
sfr@...b.auug.org.au, Sam Ravnborg <sam@...nborg.org>
Subject: Re: [patch, -git] drivers/media build fix for modular builds
On Wed, 2008-04-30 at 13:12 -0300, Mauro Carvalho Chehab wrote:
> On Wed, 30 Apr 2008 17:48:10 +0200
> Mike Galbraith <efault@....de> wrote:
>
> >
> > On Wed, 2008-04-30 at 12:25 -0300, Mauro Carvalho Chehab wrote:
> >
> > > Please try this patch. It should avoid an OOPS, if attach fails.
> >
> > Different oops.
> >
>
> Detach order were wrong.
>
> Try this, please.
[ 13.552565] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 13.566864] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 13.613250] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 13.627572] saa7133[0]: found at 0000:02:00.0, rev: 209, irq: 16, latency: 84, mmio: 0xfddff000
[ 13.640970] saa7133[0]: subsystem: 16be:000d, board: Medion Md8800 Quadro [card=96,autodetected]
[ 13.655597] saa7133[0]: board init: gpio is 0
[ 13.819782] saa7133[0]: i2c eeprom 00: be 16 0d 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 13.833102] saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff 00 01 50 32 79 01 3c ca 50
[ 13.846870] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 03 01 00 06 ff 00 29 02 51 96 2b
[ 13.861549] saa7133[0]: i2c eeprom 30: a7 58 7a 1f 03 8e 84 5e da 7a 04 b3 05 87 b2 3c
[ 13.876947] saa7133[0]: i2c eeprom 40: ff 28 00 c0 96 10 03 00 c0 1c fd 79 44 9f c2 8f
[ 13.893136] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 13.906301] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 13.920147] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 13.934434] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 13.949006] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 13.963781] saa7133[0]: i2c eeprom a0:<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc000152c873]
[ 13.979917] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 13.990784] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.004791] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.018891] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.032819] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.046597] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.106836] TUNER: Unable to find symbol tda829x_probe()
[ 14.115431] tuner' 1-004b: chip found @ 0x96 (saa7133[0])
[ 14.128599] DVB: Unable to find symbol tda9887_attach()
[ 14.149167] saa7133[0]: registered device video0 [v4l2]
[ 14.157472] saa7133[0]: registered device vbi0
[ 14.261713] DVB: Unable to find symbol tda827x_attach()
[ 14.269949] saa7133[0]/dvb: no tda827x tuner found at addr: 60
[ 14.278700] BUG: unable to handle kernel NULL pointer dereference at 0000000000000200
[ 14.289562] IP: [<ffffffffa02ded6b>] :dvb_core:dvb_frontend_stop+0x2e/0x85
[ 14.299451] PGD bd022067 PUD be877067 PMD 0
[ 14.306703] Oops: 0002 [1] SMP
[ 14.312706] CPU 2
[ 14.317400] Modules linked in: tda1004x saa7134_dvb(+) videobuf_dvb dvb_core tuner saa7134 snd_hda_intel compat_ioctl32 videodev snd_pcm v4l1_compat firewire_ohci v4l2_common firewire_core videobuf_dma_sg snd_timer videobuf_core usbhid snd_page_alloc ir_kbd_i2c crc_itu_t snd_hwdep sr_mod snd ir_common ohci1394 rtc_cmos tveeprom hid i2c_i801 ieee1394 cdrom e1000e usb_storage rtc_core iTCO_wdt i2c_core rtc_lib button intel_agp ff_memless serio_raw iTCO_vendor_support sg soundcore uhci_hcd ehci_hcd sd_mod usbcore edd ext3 mbcache jbd fan ahci libata scsi_mod dock thermal processor
[ 14.377661] Pid: 2226, comm: modprobe Not tainted 2.6.26-smp #7
[ 14.377663] RIP: 0010:[<ffffffffa02ded6b>] [<ffffffffa02ded6b>] :dvb_core:dvb_frontend_stop+0x2e/0x85
[ 14.377673] RSP: 0000:ffff8100be00dc98 EFLAGS: 00010246
[ 14.377675] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff8100be00db38
[ 14.377677] RDX: 00000000ffffffea RSI: ffff8100be00c010 RDI: ffff81003746c410
[ 14.377678] RBP: ffff8100be00dca8 R08: 0000000000000000 R09: 0000000000000000
[ 14.377680] R10: ffff8100be00da68 R11: ffff81003785ec60 R12: 0000000000000000
[ 14.377681] R13: ffffffffa02f7580 R14: ffff8100bd410170 R15: ffffc20010300e00
[ 14.377683] FS: 00007fcb72d686f0(0000) GS:ffff8100bf806780(0000) knlGS:0000000000000000
[ 14.377685] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 14.377686] CR2: 0000000000000200 CR3: 00000000bddeb000 CR4: 00000000000006e0
[ 14.377688] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 14.377690] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 14.377691] Process modprobe (pid: 2226, threadinfo ffff8100be00c000, task ffff8100bd031620)
[ 14.377693] Stack: ffff8100be00dcc8 ffff81003746c410 ffff8100be00dcf8 ffffffffa02dff5b
[ 14.377696] ffffffffa000b4c0 ffff81003746c410 ffff8100be00dcf8 ffffffffa02f2533
[ 14.377699] ffff8100bd410000 ffff8100bd410000 ffff8100bd410000 ffff8100bd410000
[ 14.377701] Call Trace:
[ 14.377712] [<ffffffffa02dff5b>] :dvb_core:dvb_unregister_frontend+0x47/0xf9
[ 14.377718] [<ffffffffa02f2533>] ? :saa7134_dvb:configure_tda827x_fe+0x123/0x133
[ 14.377725] [<ffffffffa02f39e9>] :saa7134_dvb:dvb_init+0x14a6/0x1603
[ 14.377733] [<ffffffff80270d2e>] ? get_pageblock_migratetype+0x1b/0x1d
[ 14.377740] [<ffffffff8028c92e>] ? virt_to_head_page+0x31/0x41
[ 14.377756] [<ffffffffa02a9efa>] :saa7134:mpeg_ops_attach+0x36/0x46
[ 14.377767] [<ffffffffa02aaed9>] :saa7134:saa7134_ts_register+0x2a/0x73
[ 14.377773] [<ffffffffa012e010>] :saa7134_dvb:dvb_register+0x10/0x12
[ 14.377777] [<ffffffff80256170>] sys_init_module+0x18be/0x19f4
[ 14.377818] [<ffffffff8023d1e4>] ? msleep+0x0/0x1e
[ 14.377823] [<ffffffff80290142>] ? vfs_read+0xa8/0x102
[ 14.377840] [<ffffffff8020c18b>] system_call_after_swapgs+0x7b/0x80
[ 14.377859]
[ 14.377860]
[ 14.377860] Code: e5 53 48 83 ec 08 83 3d fb ef 00 00 00 48 8b 9f d8 02 00 00 74 15 48 c7 c6 50 2d 2e a0 48 c7 c7 12 4b 2e a0 31 c0 e8 36 62 f5 df <c7> 83 00 02 00 00 01 00 00 00 0f ae f0 48 8b bb f0 01 00 00 48
[ 14.377873] RIP [<ffffffffa02ded6b>] :dvb_core:dvb_frontend_stop+0x2e/0x85
[ 14.377881] RSP <ffff8100be00dc98>
[ 14.377882] CR2: 0000000000000200
[ 14.377888] ---[ end trace 0fbfd864057429c5 ]---
To be sure we're on the same page, the sum of applied patches is..
diff --git a/drivers/media/Makefile b/drivers/media/Makefile
index 73f742c..cc11c4c 100644
--- a/drivers/media/Makefile
+++ b/drivers/media/Makefile
@@ -2,6 +2,8 @@
# Makefile for the kernel multimedia device drivers.
#
+obj-y := common/
+
obj-$(CONFIG_VIDEO_MEDIA) += common/
# Since hybrid devices are here, should be compiled if DVB and/or V4L
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index 1c7fe68..d4801ce 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -509,8 +509,8 @@ static int attach_xc3028(u8 addr, struct cx8802_dev *dev)
if (!fe) {
printk(KERN_ERR "%s/2: xc3028 attach failed\n",
dev->core->name);
- dvb_frontend_detach(dev->dvb.frontend);
dvb_unregister_frontend(dev->dvb.frontend);
+ dvb_frontend_detach(dev->dvb.frontend);
dev->dvb.frontend = NULL;
return -EINVAL;
}
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index 2d16be2..7b7bcef 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -538,19 +538,23 @@ static int philips_tda827x_tuner_sleep(struct dvb_frontend *fe)
return 0;
}
-static void configure_tda827x_fe(struct saa7134_dev *dev, struct tda1004x_config *cdec_conf,
- struct tda827x_config *tuner_conf)
+static int configure_tda827x_fe(struct saa7134_dev *dev,
+ struct tda1004x_config *cdec_conf,
+ struct tda827x_config *tuner_conf)
{
dev->dvb.frontend = dvb_attach(tda10046_attach, cdec_conf, &dev->i2c_adap);
if (dev->dvb.frontend) {
if (cdec_conf->i2c_gate)
dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
- if (dvb_attach(tda827x_attach, dev->dvb.frontend, cdec_conf->tuner_address,
- &dev->i2c_adap, tuner_conf) == NULL) {
- wprintk("no tda827x tuner found at addr: %02x\n",
+ if (dvb_attach(tda827x_attach, dev->dvb.frontend,
+ cdec_conf->tuner_address,
+ &dev->i2c_adap, tuner_conf))
+ return 0;
+
+ wprintk("no tda827x tuner found at addr: %02x\n",
cdec_conf->tuner_address);
- }
}
+ return -EINVAL;
}
/* ------------------------------------------------------------------ */
@@ -997,7 +1001,9 @@ static int dvb_init(struct saa7134_dev *dev)
break;
case SAA7134_BOARD_FLYDVBTDUO:
case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS:
- configure_tda827x_fe(dev, &tda827x_lifeview_config, &tda827x_cfg_0);
+ if (configure_tda827x_fe(dev, &tda827x_lifeview_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_PHILIPS_EUROPA:
case SAA7134_BOARD_VIDEOMATE_DVBT_300:
@@ -1022,36 +1028,52 @@ static int dvb_init(struct saa7134_dev *dev)
}
break;
case SAA7134_BOARD_KWORLD_DVBT_210:
- configure_tda827x_fe(dev, &kworld_dvb_t_210_config, &tda827x_cfg_2);
+ if (configure_tda827x_fe(dev, &kworld_dvb_t_210_config,
+ &tda827x_cfg_2) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_PHILIPS_TIGER:
- configure_tda827x_fe(dev, &philips_tiger_config, &tda827x_cfg_0);
+ if (configure_tda827x_fe(dev, &philips_tiger_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_PINNACLE_PCTV_310i:
- configure_tda827x_fe(dev, &pinnacle_pctv_310i_config, &tda827x_cfg_1);
+ if (configure_tda827x_fe(dev, &pinnacle_pctv_310i_config,
+ &tda827x_cfg_1) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_HAUPPAUGE_HVR1110:
- configure_tda827x_fe(dev, &hauppauge_hvr_1110_config, &tda827x_cfg_1);
+ if (configure_tda827x_fe(dev, &hauppauge_hvr_1110_config,
+ &tda827x_cfg_1) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
- configure_tda827x_fe(dev, &asus_p7131_dual_config, &tda827x_cfg_0);
+ if (configure_tda827x_fe(dev, &asus_p7131_dual_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_FLYDVBT_LR301:
- configure_tda827x_fe(dev, &tda827x_lifeview_config, &tda827x_cfg_0);
+ if (configure_tda827x_fe(dev, &tda827x_lifeview_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_FLYDVB_TRIO:
- if(! use_frontend) { /* terrestrial */
- configure_tda827x_fe(dev, &lifeview_trio_config, &tda827x_cfg_0);
+ if (!use_frontend) { /* terrestrial */
+ if (configure_tda827x_fe(dev, &lifeview_trio_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
} else { /* satellite */
dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap);
if (dev->dvb.frontend) {
if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x63,
&dev->i2c_adap, 0) == NULL) {
wprintk("%s: Lifeview Trio, No tda826x found!\n", __func__);
+ goto dettach_frontend;
}
if (dvb_attach(isl6421_attach, dev->dvb.frontend, &dev->i2c_adap,
0x08, 0, 0) == NULL) {
wprintk("%s: Lifeview Trio, No ISL6421 found!\n", __func__);
+ goto dettach_frontend;
}
}
}
@@ -1067,15 +1089,20 @@ static int dvb_init(struct saa7134_dev *dev)
&ads_duo_cfg) == NULL) {
wprintk("no tda827x tuner found at addr: %02x\n",
ads_tech_duo_config.tuner_address);
+ goto dettach_frontend;
}
}
break;
case SAA7134_BOARD_TEVION_DVBT_220RF:
- configure_tda827x_fe(dev, &tevion_dvbt220rf_config, &tda827x_cfg_0);
+ if (configure_tda827x_fe(dev, &tevion_dvbt220rf_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_MEDION_MD8800_QUADRO:
if (!use_frontend) { /* terrestrial */
- configure_tda827x_fe(dev, &md8800_dvbt_config, &tda827x_cfg_0);
+ if (configure_tda827x_fe(dev, &md8800_dvbt_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
} else { /* satellite */
dev->dvb.frontend = dvb_attach(tda10086_attach,
&flydvbs, &dev->i2c_adap);
@@ -1086,16 +1113,20 @@ static int dvb_init(struct saa7134_dev *dev)
struct i2c_msg msg = {.addr = 0x08, .flags = 0, .len = 1};
if (dvb_attach(tda826x_attach, dev->dvb.frontend,
- 0x60, &dev->i2c_adap, 0) == NULL)
+ 0x60, &dev->i2c_adap, 0) == NULL) {
wprintk("%s: Medion Quadro, no tda826x "
"found !\n", __func__);
+ goto dettach_frontend;
+ }
if (dev_id != 0x08) {
/* we need to open the i2c gate (we know it exists) */
fe->ops.i2c_gate_ctrl(fe, 1);
if (dvb_attach(isl6405_attach, fe,
- &dev->i2c_adap, 0x08, 0, 0) == NULL)
+ &dev->i2c_adap, 0x08, 0, 0) == NULL) {
wprintk("%s: Medion Quadro, no ISL6405 "
"found !\n", __func__);
+ goto dettach_frontend;
+ }
if (dev_id == 0x07) {
/* fire up the 2nd section of the LNB supply since
we can't do this from the other section */
@@ -1117,19 +1148,17 @@ static int dvb_init(struct saa7134_dev *dev)
case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180:
dev->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180,
&dev->i2c_adap);
- if (dev->dvb.frontend) {
+ if (dev->dvb.frontend)
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
NULL, DVB_PLL_TDHU2);
- }
break;
case SAA7134_BOARD_KWORLD_ATSC110:
dev->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110,
&dev->i2c_adap);
- if (dev->dvb.frontend) {
+ if (dev->dvb.frontend)
dvb_attach(simple_tuner_attach, dev->dvb.frontend,
&dev->i2c_adap, 0x61,
TUNER_PHILIPS_TUV1236D);
- }
break;
case SAA7134_BOARD_FLYDVBS_LR300:
dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
@@ -1138,10 +1167,12 @@ static int dvb_init(struct saa7134_dev *dev)
if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x60,
&dev->i2c_adap, 0) == NULL) {
wprintk("%s: No tda826x found!\n", __func__);
+ goto dettach_frontend;
}
if (dvb_attach(isl6421_attach, dev->dvb.frontend,
&dev->i2c_adap, 0x08, 0, 0) == NULL) {
wprintk("%s: No ISL6421 found!\n", __func__);
+ goto dettach_frontend;
}
}
break;
@@ -1168,43 +1199,65 @@ static int dvb_init(struct saa7134_dev *dev)
}
break;
case SAA7134_BOARD_CINERGY_HT_PCMCIA:
- configure_tda827x_fe(dev, &cinergy_ht_config, &tda827x_cfg_0);
+ if (configure_tda827x_fe(dev, &cinergy_ht_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_CINERGY_HT_PCI:
- configure_tda827x_fe(dev, &cinergy_ht_pci_config, &tda827x_cfg_0);
+ if (configure_tda827x_fe(dev, &cinergy_ht_pci_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_PHILIPS_TIGER_S:
- configure_tda827x_fe(dev, &philips_tiger_s_config, &tda827x_cfg_2);
+ if (configure_tda827x_fe(dev, &philips_tiger_s_config,
+ &tda827x_cfg_2) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_ASUS_P7131_4871:
- configure_tda827x_fe(dev, &asus_p7131_4871_config, &tda827x_cfg_2);
+ if (configure_tda827x_fe(dev, &asus_p7131_4871_config,
+ &tda827x_cfg_2) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA:
- configure_tda827x_fe(dev, &asus_p7131_hybrid_lna_config, &tda827x_cfg_2);
+ if (configure_tda827x_fe(dev, &asus_p7131_hybrid_lna_config,
+ &tda827x_cfg_2) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_AVERMEDIA_SUPER_007:
- configure_tda827x_fe(dev, &avermedia_super_007_config, &tda827x_cfg_0);
+ if (configure_tda827x_fe(dev, &avermedia_super_007_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_TWINHAN_DTV_DVB_3056:
- configure_tda827x_fe(dev, &twinhan_dtv_dvb_3056_config, &tda827x_cfg_2_sw42);
+ if (configure_tda827x_fe(dev, &twinhan_dtv_dvb_3056_config,
+ &tda827x_cfg_2_sw42) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_PHILIPS_SNAKE:
dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
&dev->i2c_adap);
if (dev->dvb.frontend) {
if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x60,
- &dev->i2c_adap, 0) == NULL)
+ &dev->i2c_adap, 0) == NULL) {
wprintk("%s: No tda826x found!\n", __func__);
+ goto dettach_frontend;
+ }
if (dvb_attach(lnbp21_attach, dev->dvb.frontend,
- &dev->i2c_adap, 0, 0) == NULL)
+ &dev->i2c_adap, 0, 0) == NULL) {
wprintk("%s: No lnbp21 found!\n", __func__);
+ goto dettach_frontend;
+ }
}
break;
case SAA7134_BOARD_CREATIX_CTX953:
- configure_tda827x_fe(dev, &md8800_dvbt_config, &tda827x_cfg_0);
+ if (configure_tda827x_fe(dev, &md8800_dvbt_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_MSI_TVANYWHERE_AD11:
- configure_tda827x_fe(dev, &philips_tiger_s_config, &tda827x_cfg_2);
+ if (configure_tda827x_fe(dev, &philips_tiger_s_config,
+ &tda827x_cfg_2) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
dev->dvb.frontend = dvb_attach(mt352_attach,
@@ -1218,16 +1271,20 @@ static int dvb_init(struct saa7134_dev *dev)
if (dev->dvb.frontend) {
struct dvb_frontend *fe;
if (dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x60,
- &dev->i2c_adap, DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL)
+ &dev->i2c_adap, DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL) {
wprintk("%s: MD7134 DVB-S, no SD1878 "
"found !\n", __func__);
+ goto dettach_frontend;
+ }
/* we need to open the i2c gate (we know it exists) */
fe = dev->dvb.frontend;
fe->ops.i2c_gate_ctrl(fe, 1);
if (dvb_attach(isl6405_attach, fe,
- &dev->i2c_adap, 0x08, 0, 0) == NULL)
+ &dev->i2c_adap, 0x08, 0, 0) == NULL) {
wprintk("%s: MD7134 DVB-S, no ISL6405 "
"found !\n", __func__);
+ goto dettach_frontend;
+ }
fe->ops.i2c_gate_ctrl(fe, 0);
dev->original_set_voltage = fe->ops.set_voltage;
fe->ops.set_voltage = md8800_set_voltage;
@@ -1254,10 +1311,7 @@ static int dvb_init(struct saa7134_dev *dev)
if (!fe) {
printk(KERN_ERR "%s/2: xc3028 attach failed\n",
dev->name);
- dvb_frontend_detach(dev->dvb.frontend);
- dvb_unregister_frontend(dev->dvb.frontend);
- dev->dvb.frontend = NULL;
- return -1;
+ goto dettach_frontend;
}
}
@@ -1282,6 +1336,13 @@ static int dvb_init(struct saa7134_dev *dev)
dev->dvb.frontend->ops.tuner_ops.sleep(dev->dvb.frontend);
}
return ret;
+
+dettach_frontend:
+ dvb_unregister_frontend(dev->dvb.frontend);
+ dvb_frontend_detach(dev->dvb.frontend);
+ dev->dvb.frontend = NULL;
+
+ return -1;
}
static int dvb_fini(struct saa7134_dev *dev)
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index 6bf104e..ab7cd45 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -40,11 +40,11 @@
typeof(&FUNCTION) __a = symbol_request(FUNCTION); \
if (__a) { \
__r = (int) __a(ARGS); \
+ symbol_put(FUNCTION); \
} else { \
printk(KERN_ERR "TUNER: Unable to find " \
"symbol "#FUNCTION"()\n"); \
} \
- symbol_put(FUNCTION); \
__r; \
})
@@ -340,16 +340,6 @@ static void tuner_i2c_address_check(struct tuner *t)
tuner_warn("====================== WARNING! ======================\n");
}
-static void attach_tda829x(struct tuner *t)
-{
- struct tda829x_config cfg = {
- .lna_cfg = t->config,
- .tuner_callback = t->tuner_callback,
- };
- dvb_attach(tda829x_attach,
- &t->fe, t->i2c->adapter, t->i2c->addr, &cfg);
-}
-
static struct xc5000_config xc5000_cfg;
static void set_type(struct i2c_client *c, unsigned int type,
@@ -385,12 +375,19 @@ static void set_type(struct i2c_client *c, unsigned int type,
switch (t->type) {
case TUNER_MT2032:
- dvb_attach(microtune_attach,
- &t->fe, t->i2c->adapter, t->i2c->addr);
+ if (!dvb_attach(microtune_attach,
+ &t->fe, t->i2c->adapter, t->i2c->addr))
+ goto attach_failed;
break;
case TUNER_PHILIPS_TDA8290:
{
- attach_tda829x(t);
+ struct tda829x_config cfg = {
+ .lna_cfg = t->config,
+ .tuner_callback = t->tuner_callback,
+ };
+ if (!dvb_attach(tda829x_attach, &t->fe, t->i2c->adapter,
+ t->i2c->addr, &cfg))
+ goto attach_failed;
break;
}
case TUNER_TEA5767:
@@ -441,8 +438,9 @@ static void set_type(struct i2c_client *c, unsigned int type,
break;
}
case TUNER_TDA9887:
- dvb_attach(tda9887_attach,
- &t->fe, t->i2c->adapter, t->i2c->addr);
+ if (!dvb_attach(tda9887_attach,
+ &t->fe, t->i2c->adapter, t->i2c->addr))
+ goto attach_failed;
break;
case TUNER_XC5000:
{
@@ -1181,7 +1179,7 @@ static int tuner_probe(struct i2c_client *client,
case 0x60:
if (tuner_symbol_probe(tea5767_autodetection,
t->i2c->adapter, t->i2c->addr)
- != EINVAL) {
+ != -EINVAL) {
t->type = TUNER_TEA5767;
t->mode_mask = T_RADIO;
t->mode = T_STANDBY;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists