| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20080521163051.GB6932@cvg>
Date: Wed, 21 May 2008 20:30:51 +0400
From: Cyrill Gorcunov <gorcunov@...il.com>
To: Ingo Molnar <mingo@...e.hu>, Thomas Gleixner <tglx@...utronix.de>,
"H. Peter Anvin" <hpa@...or.com>
Cc: Jiri Slaby <jirislaby@...il.com>,
LKML <linux-kernel@...r.kernel.org>,
"Maciej W. Rozycki" <macro@...ux-mips.org>,
Jeremy Fitzhardinge <jeremy@...p.org>,
Andi Kleen <andi@...stfloor.org>
Subject: [RFC] x86: merging nmi 32/64 to nmi.c v2
This is a second attempt to merge nmi-32/64 to nmi.c
Summary changes:
- a few helper functions added (placed on top part of nmi.c)
- nmi_watchdog_default() now handles both 32/64 modes
- check_nmi_watchdog() uses for_each_online_cpu() even in 32bit mode
since cpu_online_map is set up after cpu_callin_map anyway
- last_irq_sums and alert_counter was defined as static arrays in 32bit
mode, so they were changed to per_cpu variables
- and the most notable change is that I've changed logic a bit for
procedures touch_nmi_watchdog() and nmi_watchdog_tick() used in
32bit mode (to be familiar with 64bit mode).
- die_nmi interface is changed in traps_32.c to be the same as it
is in traps_64.c. By this we also able (and we do) add an ability
to pass "panic" for nmi_watchdog in 32bit mode too
- in both mode apic_write_around is used since in 64bit mode it
will be exanded to apic_write anyway but allow us to save from #ifdef
The helper functions (on top of nmi.c) still contain #ifdef sections.
There is no simple way to get them more elegant since they hide different
types. So to eliminate this we need to bring much more specific changes
which is not that easy at once. At least this could be a first step in
further code simplification.
Actually I would like to get a somehow final word about this process
and my efforts on it - I mean if it becomes annoying and silly
from my side to try to merge them I would better digg in some other
area ;)
This patch is based on commit
commit 8f40f672e6bb071812f61bfbd30efc3fc1263ad1
Merge: 8978a31... 887b3ec...
Author: Linus Torvalds <torvalds@...ux-foundation.org>
Date: Wed May 14 19:30:13 2008 -0700
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
Any comments are quite welcome.
And thanks for all comments about first version of the patch.
Signed-off-by: Cyrill Gorcunov <gorcunov@...il.com>
---
arch/x86/kernel/Makefile | 2 +-
arch/x86/kernel/nmi.c | 551 ++++++++++++++++++++++++++++++++++++++++++++
arch/x86/kernel/nmi_32.c | 472 -------------------------------------
arch/x86/kernel/nmi_64.c | 482 --------------------------------------
arch/x86/kernel/traps_32.c | 8 +-
arch/x86/kernel/traps_64.c | 5 +-
include/asm-x86/nmi.h | 6 +-
7 files changed, 563 insertions(+), 963 deletions(-)
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 5e618c3..d5dd666 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -53,7 +53,7 @@ obj-$(CONFIG_X86_32_SMP) += smpcommon.o
obj-$(CONFIG_X86_64_SMP) += tsc_sync.o smpcommon.o
obj-$(CONFIG_X86_TRAMPOLINE) += trampoline_$(BITS).o
obj-$(CONFIG_X86_MPPARSE) += mpparse.o
-obj-$(CONFIG_X86_LOCAL_APIC) += apic_$(BITS).o nmi_$(BITS).o
+obj-$(CONFIG_X86_LOCAL_APIC) += apic_$(BITS).o nmi.o
obj-$(CONFIG_X86_IO_APIC) += io_apic_$(BITS).o
obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups_32.o
obj-$(CONFIG_KEXEC) += machine_kexec_$(BITS).o
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
new file mode 100644
index 0000000..437eccc
--- /dev/null
+++ b/arch/x86/kernel/nmi.c
@@ -0,0 +1,551 @@
+/*
+ * NMI watchdog support on APIC systems
+ *
+ * Started by Ingo Molnar <mingo@...hat.com>
+ *
+ * Fixes:
+ * Mikael Pettersson : AMD K7 support for local APIC NMI watchdog.
+ * Mikael Pettersson : Power Management for local APIC NMI watchdog.
+ * Mikael Pettersson : Pentium 4 support for local APIC NMI watchdog.
+ * Pavel Machek and
+ * Mikael Pettersson : PM converted to driver model. Disable/enable API.
+ */
+
+#include <linux/nmi.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/sysdev.h>
+#include <linux/sysctl.h>
+#include <linux/kprobes.h>
+#include <linux/cpumask.h>
+#include <linux/kdebug.h>
+#include <linux/kernel_stat.h>
+
+#include <asm/smp.h>
+#include <asm/nmi.h>
+#include <asm/proto.h>
+#include <asm/mce.h>
+#include <asm/timer.h>
+
+#include <mach_traps.h>
+
+int unknown_nmi_panic;
+int nmi_watchdog_enabled;
+
+static int panic_on_timeout;
+
+static cpumask_t backtrace_mask = CPU_MASK_NONE;
+
+/*
+ * nmi_active
+ * >0: the lapic NMI watchdog is active, but can be disabled
+ * <0: the lapic NMI watchdog has not been set up, and cannot
+ * be enabled
+ * 0: the lapic NMI watchdog is disabled, but can be enabled
+ */
+atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */
+unsigned int nmi_watchdog = NMI_DEFAULT;
+
+static DEFINE_PER_CPU(short, wd_enabled);
+static unsigned int nmi_hz = HZ;
+static int endflag __initdata = 0;
+
+static inline unsigned int get_nmi_count(int cpu)
+{
+#ifdef CONFIG_X86_64
+ return cpu_pda(cpu)->__nmi_count;
+#else
+ return nmi_count(cpu);
+#endif
+}
+
+static inline int mce_in_progress(void)
+{
+#if defined(CONFIX_X86_64) && defined(CONFIG_X86_MCE)
+ return atomic_read(&mce_entry) > 0;
+#endif
+ return 0;
+}
+
+/*
+ * Take the local apic timer and PIT/HPET into account. We don't
+ * know which one is active, when we have highres/dyntick on
+ */
+static inline unsigned int get_timer_irqs(int cpu)
+{
+#ifdef CONFIG_X86_64
+ return read_pda(apic_timer_irqs) + read_pda(irq0_irqs);
+#else
+ return per_cpu(irq_stat, cpu).apic_timer_irqs +
+ per_cpu(irq_stat, cpu).irq0_irqs;
+#endif
+}
+
+/* Run after command line and cpu_init init, but before all other checks */
+void nmi_watchdog_default(void)
+{
+ if (nmi_watchdog != NMI_DEFAULT)
+ return;
+#ifdef CONFIG_X86_64
+ nmi_watchdog = NMI_NONE;
+#else
+ if (lapic_watchdog_ok())
+ nmi_watchdog = NMI_LOCAL_APIC;
+ else
+ nmi_watchdog = NMI_IO_APIC;
+#endif
+}
+
+#ifdef CONFIG_SMP
+/*
+ * The performance counters used by NMI_LOCAL_APIC don't trigger when
+ * the CPU is idle. To make sure the NMI watchdog really ticks on all
+ * CPUs during the test make them busy.
+ */
+static __init void nmi_cpu_busy(void *data)
+{
+ local_irq_enable_in_hardirq();
+ /*
+ * Intentionally don't use cpu_relax here. This is
+ * to make sure that the performance counter really ticks,
+ * even if there is a simulator or similar that catches the
+ * pause instruction. On a real HT machine this is fine because
+ * all other CPUs are busy with "useless" delay loops and don't
+ * care if they get somewhat less cycles.
+ */
+ while (endflag == 0)
+ mb();
+}
+#endif /* CONFIG_SMP */
+
+int __init check_nmi_watchdog(void)
+{
+ unsigned int *prev_nmi_count;
+ int cpu;
+
+ if (nmi_watchdog == NMI_NONE || nmi_watchdog == NMI_DISABLED)
+ return 0;
+
+ if (!atomic_read(&nmi_active))
+ return 0;
+
+ prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
+ if (!prev_nmi_count)
+ goto error;
+
+ printk(KERN_INFO "Testing NMI watchdog ... ");
+
+#ifdef CONFIG_SMP
+ if (nmi_watchdog == NMI_LOCAL_APIC)
+ smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0);
+#endif
+
+ for_each_possible_cpu(cpu)
+ prev_nmi_count[cpu] = get_nmi_count(cpu);
+
+ local_irq_enable();
+ mdelay((20 * 1000) / nmi_hz); /* wait for 20 ticks */
+
+ for_each_online_cpu(cpu) {
+ if (!per_cpu(wd_enabled, cpu))
+ continue;
+ if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) {
+ printk(KERN_WARNING "WARNING: CPU#%d: NMI "
+ "appears to be stuck (%d->%d)!\n",
+ cpu,
+ prev_nmi_count[cpu],
+ get_nmi_count(cpu));
+ per_cpu(wd_enabled, cpu) = 0;
+ atomic_dec(&nmi_active);
+ }
+ }
+ endflag = 1;
+ if (!atomic_read(&nmi_active)) {
+ kfree(prev_nmi_count);
+ atomic_set(&nmi_active, -1);
+ goto error;
+ }
+ printk("OK.\n");
+
+ /*
+ * now that we know it works we can reduce NMI frequency to
+ * something more reasonable; makes a difference in some configs
+ */
+ if (nmi_watchdog == NMI_LOCAL_APIC)
+ nmi_hz = lapic_adjust_nmi_hz(1);
+
+ kfree(prev_nmi_count);
+ return 0;
+
+error:
+#ifdef CONFIG_X86_32
+ timer_ack = !cpu_has_tsc;
+#endif
+ return -1;
+}
+
+static int __init setup_nmi_watchdog(char *str)
+{
+ int nmi;
+
+ if (!strncmp(str, "panic", 5)) {
+ panic_on_timeout = 1;
+ str = strchr(str, ',');
+ if (!str)
+ return 1;
+ ++str;
+ }
+
+ get_option(&str, &nmi);
+ if (nmi >= NMI_INVALID || nmi < NMI_NONE)
+ return 0;
+
+ nmi_watchdog = nmi;
+
+ return 1;
+}
+__setup("nmi_watchdog=", setup_nmi_watchdog);
+
+/* Suspend/resume support */
+#ifdef CONFIG_PM
+
+static int nmi_pm_active; /* nmi_active before suspend */
+
+static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state)
+{
+ /* only CPU0 goes here, other CPUs should be offline */
+ nmi_pm_active = atomic_read(&nmi_active);
+ stop_apic_nmi_watchdog(NULL);
+ BUG_ON(atomic_read(&nmi_active) != 0);
+ return 0;
+}
+
+static int lapic_nmi_resume(struct sys_device *dev)
+{
+ /* only CPU0 goes here, other CPUs should be offline */
+ if (nmi_pm_active > 0) {
+ setup_apic_nmi_watchdog(NULL);
+ touch_nmi_watchdog();
+ }
+ return 0;
+}
+
+static struct sysdev_class nmi_sysclass = {
+ .name = "lapic_nmi",
+ .resume = lapic_nmi_resume,
+ .suspend = lapic_nmi_suspend,
+};
+
+static struct sys_device device_lapic_nmi = {
+ .id = 0,
+ .cls = &nmi_sysclass,
+};
+
+static int __init init_lapic_nmi_sysfs(void)
+{
+ int error;
+
+ /*
+ * should really be a BUG_ON but b/c this is an
+ * init call, it just doesn't work. -dcz
+ */
+ if (nmi_watchdog != NMI_LOCAL_APIC)
+ return 0;
+
+ if (atomic_read(&nmi_active) < 0)
+ return 0;
+
+ error = sysdev_class_register(&nmi_sysclass);
+ if (!error)
+ error = sysdev_register(&device_lapic_nmi);
+
+ return error;
+}
+/* must come after the local APIC's device_initcall() */
+late_initcall(init_lapic_nmi_sysfs);
+
+#endif /* CONFIG_PM */
+
+static void __acpi_nmi_enable(void *__unused)
+{
+ apic_write_around(APIC_LVT0, APIC_DM_NMI);
+}
+
+/* Enable timer based NMIs on all CPUs */
+void acpi_nmi_enable(void)
+{
+ if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
+ on_each_cpu(__acpi_nmi_enable, NULL, 0, 1);
+}
+
+static void __acpi_nmi_disable(void *__unused)
+{
+ apic_write_around(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED);
+}
+
+/* Disable timer based NMIs on all CPUs */
+void acpi_nmi_disable(void)
+{
+ if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
+ on_each_cpu(__acpi_nmi_disable, NULL, 0, 1);
+}
+
+void setup_apic_nmi_watchdog(void *unused)
+{
+ if (__get_cpu_var(wd_enabled))
+ return;
+
+ /* cheap hack to support suspend/resume */
+ /* if cpu0 is not active neither should the other cpus */
+ if (smp_processor_id() != 0 && atomic_read(&nmi_active) <= 0)
+ return;
+
+ switch (nmi_watchdog) {
+ case NMI_LOCAL_APIC:
+ __get_cpu_var(wd_enabled) = 1;
+ if (lapic_watchdog_init(nmi_hz) < 0) {
+ __get_cpu_var(wd_enabled) = 0;
+ return;
+ }
+ /* FALL THROUGH */
+ case NMI_IO_APIC:
+ __get_cpu_var(wd_enabled) = 1;
+ atomic_inc(&nmi_active);
+ }
+}
+
+void stop_apic_nmi_watchdog(void *unused)
+{
+ /* only support LOCAL and IO APICs for now */
+ if (nmi_watchdog != NMI_LOCAL_APIC &&
+ nmi_watchdog != NMI_IO_APIC)
+ return;
+ if (__get_cpu_var(wd_enabled) == 0)
+ return;
+ if (nmi_watchdog == NMI_LOCAL_APIC)
+ lapic_watchdog_stop();
+ __get_cpu_var(wd_enabled) = 0;
+ atomic_dec(&nmi_active);
+}
+
+/*
+ * the best way to detect whether a CPU has a 'hard lockup' problem
+ * is to check it's local APIC timer IRQ counts. If they are not
+ * changing then that CPU has some problem.
+ *
+ * as these watchdog NMI IRQs are generated on every CPU, we only
+ * have to check the current processor.
+ *
+ * since NMIs don't listen to _any_ locks, we have to be extremely
+ * careful not to rely on unsafe variables. The printk might lock
+ * up though, so we have to break up any console locks first ...
+ * [when there will be more tty-related locks, break them up here too!]
+ */
+
+static DEFINE_PER_CPU(unsigned, last_irq_sum);
+static DEFINE_PER_CPU(local_t, alert_counter);
+static DEFINE_PER_CPU(int, nmi_touch);
+
+void touch_nmi_watchdog(void)
+{
+ if (nmi_watchdog > 0) {
+ unsigned cpu;
+
+ /*
+ * Tell other CPUs to reset their alert counters. We cannot
+ * do it ourselves because the alert count increase is not
+ * atomic
+ */
+ for_each_present_cpu(cpu) {
+ if (per_cpu(nmi_touch, cpu) != 1)
+ per_cpu(nmi_touch, cpu) = 1;
+ }
+ }
+
+ /* Tickle the softlockup detector too */
+ touch_softlockup_watchdog();
+}
+EXPORT_SYMBOL(touch_nmi_watchdog);
+
+notrace __kprobes int
+nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
+{
+ /*
+ * Since current_thread_info()-> is always on the stack, and we
+ * always switch the stack NMI-atomically, it's safe to use
+ * smp_processor_id()
+ */
+ unsigned int sum;
+ int touched = 0;
+ int cpu = smp_processor_id();
+ int rc = 0;
+
+ /* check for other users first */
+ if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT)
+ == NOTIFY_STOP) {
+ rc = 1;
+ touched = 1;
+ }
+
+ sum = get_timer_irqs(cpu);
+
+ if (__get_cpu_var(nmi_touch)) {
+ __get_cpu_var(nmi_touch) = 0;
+ touched = 1;
+ }
+
+ if (cpu_isset(cpu, backtrace_mask)) {
+ static DEFINE_SPINLOCK(lock);
+ spin_lock(&lock);
+ printk("NMI backtrace for cpu %d\n", cpu);
+ dump_stack();
+ spin_unlock(&lock);
+ cpu_clear(cpu, backtrace_mask);
+ }
+
+ /*
+ * Could check oops_in_progress here too,
+ * but it's safer not to do
+ */
+ if (mce_in_progress())
+ touched = 1;
+
+ /* if the none of the timers isn't firing, this cpu isn't doing much */
+ if (!touched && __get_cpu_var(last_irq_sum) == sum) {
+ /*
+ * Ayiee, looks like this CPU is stuck ...
+ * wait a few IRQs (5 seconds) before doing the oops ...
+ */
+ local_inc(&__get_cpu_var(alert_counter));
+ if (local_read(&__get_cpu_var(alert_counter)) == 5 * nmi_hz)
+ die_nmi("NMI Watchdog detected LOCKUP\n",
+ regs, panic_on_timeout);
+ } else {
+ __get_cpu_var(last_irq_sum) = sum;
+ local_set(&__get_cpu_var(alert_counter), 0);
+ }
+
+ /* see if the nmi watchdog went off */
+ if (!__get_cpu_var(wd_enabled))
+ return rc;
+
+ switch (nmi_watchdog) {
+ case NMI_LOCAL_APIC:
+ rc |= lapic_wd_event(nmi_hz);
+ break;
+ case NMI_IO_APIC:
+ /*
+ * don't know how to accurately check for this.
+ * just assume it was a watchdog timer interrupt
+ * This matches the old behaviour.
+ */
+ rc = 1;
+ break;
+ }
+
+ return rc;
+}
+
+#ifdef CONFIG_X86_64
+static unsigned ignore_nmis;
+
+asmlinkage notrace __kprobes void
+do_nmi(struct pt_regs *regs, long error_code)
+{
+ nmi_enter();
+ add_pda(__nmi_count,1);
+ if (!ignore_nmis)
+ default_do_nmi(regs);
+ nmi_exit();
+}
+
+void stop_nmi(void)
+{
+ acpi_nmi_disable();
+ ignore_nmis++;
+}
+
+void restart_nmi(void)
+{
+ ignore_nmis--;
+ acpi_nmi_enable();
+}
+#endif /* CONFIG_X86_64 */
+
+#ifdef CONFIG_SYSCTL
+
+static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
+{
+ unsigned char reason = get_nmi_reason();
+ char buf[64];
+
+ sprintf(buf, "NMI received for unknown reason %02x\n", reason);
+ die_nmi(buf, regs, 1);
+ return 0;
+}
+
+/*
+ * proc handler for /proc/sys/kernel/nmi
+ */
+int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file,
+ void __user *buffer, size_t *length, loff_t *ppos)
+{
+ int old_state;
+
+ nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0;
+ old_state = nmi_watchdog_enabled;
+ proc_dointvec(table, write, file, buffer, length, ppos);
+ if (!!old_state == !!nmi_watchdog_enabled)
+ return 0;
+
+ if (atomic_read(&nmi_active) < 0 || nmi_watchdog == NMI_DISABLED) {
+ printk(KERN_WARNING
+ "NMI watchdog is permanently disabled\n");
+ return -EIO;
+ }
+
+ /* if nmi_watchdog is not set yet, then set it */
+ nmi_watchdog_default();
+
+ if (nmi_watchdog == NMI_LOCAL_APIC) {
+ if (nmi_watchdog_enabled)
+ enable_lapic_nmi_watchdog();
+ else
+ disable_lapic_nmi_watchdog();
+ } else {
+ printk(KERN_WARNING
+ "NMI watchdog doesn't know what hardware to touch\n");
+ return -EIO;
+ }
+ return 0;
+}
+
+#endif /* CONFIG_SYSCTL */
+
+int do_nmi_callback(struct pt_regs *regs, int cpu)
+{
+#ifdef CONFIG_SYSCTL
+ if (unknown_nmi_panic)
+ return unknown_nmi_panic_callback(regs, cpu);
+#endif
+ return 0;
+}
+
+void __trigger_all_cpu_backtrace(void)
+{
+ int i;
+
+ backtrace_mask = cpu_online_map;
+ /* Wait for up to 10 seconds for all CPUs to do the backtrace */
+ for (i = 0; i < 10 * 1000; i++) {
+ if (cpus_empty(backtrace_mask))
+ break;
+ mdelay(1);
+ }
+}
+
+EXPORT_SYMBOL(nmi_active);
+EXPORT_SYMBOL(nmi_watchdog);
+
diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c
deleted file mode 100644
index 11b14bb..0000000
--- a/arch/x86/kernel/nmi_32.c
+++ /dev/null
@@ -1,472 +0,0 @@
-/*
- * NMI watchdog support on APIC systems
- *
- * Started by Ingo Molnar <mingo@...hat.com>
- *
- * Fixes:
- * Mikael Pettersson : AMD K7 support for local APIC NMI watchdog.
- * Mikael Pettersson : Power Management for local APIC NMI watchdog.
- * Mikael Pettersson : Pentium 4 support for local APIC NMI watchdog.
- * Pavel Machek and
- * Mikael Pettersson : PM converted to driver model. Disable/enable API.
- */
-
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/nmi.h>
-#include <linux/sysdev.h>
-#include <linux/sysctl.h>
-#include <linux/percpu.h>
-#include <linux/kprobes.h>
-#include <linux/cpumask.h>
-#include <linux/kernel_stat.h>
-#include <linux/kdebug.h>
-#include <linux/slab.h>
-
-#include <asm/smp.h>
-#include <asm/nmi.h>
-#include <asm/timer.h>
-
-#include "mach_traps.h"
-
-int unknown_nmi_panic;
-int nmi_watchdog_enabled;
-
-static cpumask_t backtrace_mask = CPU_MASK_NONE;
-
-/* nmi_active:
- * >0: the lapic NMI watchdog is active, but can be disabled
- * <0: the lapic NMI watchdog has not been set up, and cannot
- * be enabled
- * 0: the lapic NMI watchdog is disabled, but can be enabled
- */
-atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */
-
-unsigned int nmi_watchdog = NMI_DEFAULT;
-static unsigned int nmi_hz = HZ;
-
-static DEFINE_PER_CPU(short, wd_enabled);
-
-static int endflag __initdata = 0;
-
-#ifdef CONFIG_SMP
-/* The performance counters used by NMI_LOCAL_APIC don't trigger when
- * the CPU is idle. To make sure the NMI watchdog really ticks on all
- * CPUs during the test make them busy.
- */
-static __init void nmi_cpu_busy(void *data)
-{
- local_irq_enable_in_hardirq();
- /* Intentionally don't use cpu_relax here. This is
- to make sure that the performance counter really ticks,
- even if there is a simulator or similar that catches the
- pause instruction. On a real HT machine this is fine because
- all other CPUs are busy with "useless" delay loops and don't
- care if they get somewhat less cycles. */
- while (endflag == 0)
- mb();
-}
-#endif
-
-int __init check_nmi_watchdog(void)
-{
- unsigned int *prev_nmi_count;
- int cpu;
-
- if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DISABLED))
- return 0;
-
- if (!atomic_read(&nmi_active))
- return 0;
-
- prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
- if (!prev_nmi_count)
- goto error;
-
- printk(KERN_INFO "Testing NMI watchdog ... ");
-
-#ifdef CONFIG_SMP
- if (nmi_watchdog == NMI_LOCAL_APIC)
- smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0);
-#endif
-
- for_each_possible_cpu(cpu)
- prev_nmi_count[cpu] = nmi_count(cpu);
- local_irq_enable();
- mdelay((20*1000)/nmi_hz); // wait 20 ticks
-
- for_each_possible_cpu(cpu) {
-#ifdef CONFIG_SMP
- /* Check cpu_callin_map here because that is set
- after the timer is started. */
- if (!cpu_isset(cpu, cpu_callin_map))
- continue;
-#endif
- if (!per_cpu(wd_enabled, cpu))
- continue;
- if (nmi_count(cpu) - prev_nmi_count[cpu] <= 5) {
- printk(KERN_WARNING "WARNING: CPU#%d: NMI "
- "appears to be stuck (%d->%d)!\n",
- cpu,
- prev_nmi_count[cpu],
- nmi_count(cpu));
- per_cpu(wd_enabled, cpu) = 0;
- atomic_dec(&nmi_active);
- }
- }
- endflag = 1;
- if (!atomic_read(&nmi_active)) {
- kfree(prev_nmi_count);
- atomic_set(&nmi_active, -1);
- goto error;
- }
- printk("OK.\n");
-
- /* now that we know it works we can reduce NMI frequency to
- something more reasonable; makes a difference in some configs */
- if (nmi_watchdog == NMI_LOCAL_APIC)
- nmi_hz = lapic_adjust_nmi_hz(1);
-
- kfree(prev_nmi_count);
- return 0;
-error:
- timer_ack = !cpu_has_tsc;
-
- return -1;
-}
-
-static int __init setup_nmi_watchdog(char *str)
-{
- int nmi;
-
- get_option(&str, &nmi);
-
- if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE))
- return 0;
-
- nmi_watchdog = nmi;
- return 1;
-}
-
-__setup("nmi_watchdog=", setup_nmi_watchdog);
-
-
-/* Suspend/resume support */
-
-#ifdef CONFIG_PM
-
-static int nmi_pm_active; /* nmi_active before suspend */
-
-static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state)
-{
- /* only CPU0 goes here, other CPUs should be offline */
- nmi_pm_active = atomic_read(&nmi_active);
- stop_apic_nmi_watchdog(NULL);
- BUG_ON(atomic_read(&nmi_active) != 0);
- return 0;
-}
-
-static int lapic_nmi_resume(struct sys_device *dev)
-{
- /* only CPU0 goes here, other CPUs should be offline */
- if (nmi_pm_active > 0) {
- setup_apic_nmi_watchdog(NULL);
- touch_nmi_watchdog();
- }
- return 0;
-}
-
-
-static struct sysdev_class nmi_sysclass = {
- .name = "lapic_nmi",
- .resume = lapic_nmi_resume,
- .suspend = lapic_nmi_suspend,
-};
-
-static struct sys_device device_lapic_nmi = {
- .id = 0,
- .cls = &nmi_sysclass,
-};
-
-static int __init init_lapic_nmi_sysfs(void)
-{
- int error;
-
- /* should really be a BUG_ON but b/c this is an
- * init call, it just doesn't work. -dcz
- */
- if (nmi_watchdog != NMI_LOCAL_APIC)
- return 0;
-
- if (atomic_read(&nmi_active) < 0)
- return 0;
-
- error = sysdev_class_register(&nmi_sysclass);
- if (!error)
- error = sysdev_register(&device_lapic_nmi);
- return error;
-}
-/* must come after the local APIC's device_initcall() */
-late_initcall(init_lapic_nmi_sysfs);
-
-#endif /* CONFIG_PM */
-
-static void __acpi_nmi_enable(void *__unused)
-{
- apic_write_around(APIC_LVT0, APIC_DM_NMI);
-}
-
-/*
- * Enable timer based NMIs on all CPUs:
- */
-void acpi_nmi_enable(void)
-{
- if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
- on_each_cpu(__acpi_nmi_enable, NULL, 0, 1);
-}
-
-static void __acpi_nmi_disable(void *__unused)
-{
- apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED);
-}
-
-/*
- * Disable timer based NMIs on all CPUs:
- */
-void acpi_nmi_disable(void)
-{
- if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
- on_each_cpu(__acpi_nmi_disable, NULL, 0, 1);
-}
-
-void setup_apic_nmi_watchdog(void *unused)
-{
- if (__get_cpu_var(wd_enabled))
- return;
-
- /* cheap hack to support suspend/resume */
- /* if cpu0 is not active neither should the other cpus */
- if ((smp_processor_id() != 0) && (atomic_read(&nmi_active) <= 0))
- return;
-
- switch (nmi_watchdog) {
- case NMI_LOCAL_APIC:
- __get_cpu_var(wd_enabled) = 1; /* enable it before to avoid race with handler */
- if (lapic_watchdog_init(nmi_hz) < 0) {
- __get_cpu_var(wd_enabled) = 0;
- return;
- }
- /* FALL THROUGH */
- case NMI_IO_APIC:
- __get_cpu_var(wd_enabled) = 1;
- atomic_inc(&nmi_active);
- }
-}
-
-void stop_apic_nmi_watchdog(void *unused)
-{
- /* only support LOCAL and IO APICs for now */
- if ((nmi_watchdog != NMI_LOCAL_APIC) &&
- (nmi_watchdog != NMI_IO_APIC))
- return;
- if (__get_cpu_var(wd_enabled) == 0)
- return;
- if (nmi_watchdog == NMI_LOCAL_APIC)
- lapic_watchdog_stop();
- __get_cpu_var(wd_enabled) = 0;
- atomic_dec(&nmi_active);
-}
-
-/*
- * the best way to detect whether a CPU has a 'hard lockup' problem
- * is to check it's local APIC timer IRQ counts. If they are not
- * changing then that CPU has some problem.
- *
- * as these watchdog NMI IRQs are generated on every CPU, we only
- * have to check the current processor.
- *
- * since NMIs don't listen to _any_ locks, we have to be extremely
- * careful not to rely on unsafe variables. The printk might lock
- * up though, so we have to break up any console locks first ...
- * [when there will be more tty-related locks, break them up
- * here too!]
- */
-
-static unsigned int
- last_irq_sums [NR_CPUS],
- alert_counter [NR_CPUS];
-
-void touch_nmi_watchdog(void)
-{
- if (nmi_watchdog > 0) {
- unsigned cpu;
-
- /*
- * Just reset the alert counters, (other CPUs might be
- * spinning on locks we hold):
- */
- for_each_present_cpu(cpu) {
- if (alert_counter[cpu])
- alert_counter[cpu] = 0;
- }
- }
-
- /*
- * Tickle the softlockup detector too:
- */
- touch_softlockup_watchdog();
-}
-EXPORT_SYMBOL(touch_nmi_watchdog);
-
-extern void die_nmi(struct pt_regs *, const char *msg);
-
-notrace __kprobes int
-nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
-{
-
- /*
- * Since current_thread_info()-> is always on the stack, and we
- * always switch the stack NMI-atomically, it's safe to use
- * smp_processor_id().
- */
- unsigned int sum;
- int touched = 0;
- int cpu = smp_processor_id();
- int rc = 0;
-
- /* check for other users first */
- if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT)
- == NOTIFY_STOP) {
- rc = 1;
- touched = 1;
- }
-
- if (cpu_isset(cpu, backtrace_mask)) {
- static DEFINE_SPINLOCK(lock); /* Serialise the printks */
-
- spin_lock(&lock);
- printk("NMI backtrace for cpu %d\n", cpu);
- dump_stack();
- spin_unlock(&lock);
- cpu_clear(cpu, backtrace_mask);
- }
-
- /*
- * Take the local apic timer and PIT/HPET into account. We don't
- * know which one is active, when we have highres/dyntick on
- */
- sum = per_cpu(irq_stat, cpu).apic_timer_irqs +
- per_cpu(irq_stat, cpu).irq0_irqs;
-
- /* if the none of the timers isn't firing, this cpu isn't doing much */
- if (!touched && last_irq_sums[cpu] == sum) {
- /*
- * Ayiee, looks like this CPU is stuck ...
- * wait a few IRQs (5 seconds) before doing the oops ...
- */
- alert_counter[cpu]++;
- if (alert_counter[cpu] == 5*nmi_hz)
- /*
- * die_nmi will return ONLY if NOTIFY_STOP happens..
- */
- die_nmi(regs, "BUG: NMI Watchdog detected LOCKUP");
- } else {
- last_irq_sums[cpu] = sum;
- alert_counter[cpu] = 0;
- }
- /* see if the nmi watchdog went off */
- if (!__get_cpu_var(wd_enabled))
- return rc;
- switch (nmi_watchdog) {
- case NMI_LOCAL_APIC:
- rc |= lapic_wd_event(nmi_hz);
- break;
- case NMI_IO_APIC:
- /* don't know how to accurately check for this.
- * just assume it was a watchdog timer interrupt
- * This matches the old behaviour.
- */
- rc = 1;
- break;
- }
- return rc;
-}
-
-#ifdef CONFIG_SYSCTL
-
-static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
-{
- unsigned char reason = get_nmi_reason();
- char buf[64];
-
- sprintf(buf, "NMI received for unknown reason %02x\n", reason);
- die_nmi(regs, buf);
- return 0;
-}
-
-/*
- * proc handler for /proc/sys/kernel/nmi
- */
-int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file,
- void __user *buffer, size_t *length, loff_t *ppos)
-{
- int old_state;
-
- nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0;
- old_state = nmi_watchdog_enabled;
- proc_dointvec(table, write, file, buffer, length, ppos);
- if (!!old_state == !!nmi_watchdog_enabled)
- return 0;
-
- if (atomic_read(&nmi_active) < 0 || nmi_watchdog == NMI_DISABLED) {
- printk( KERN_WARNING "NMI watchdog is permanently disabled\n");
- return -EIO;
- }
-
- if (nmi_watchdog == NMI_DEFAULT) {
- if (lapic_watchdog_ok())
- nmi_watchdog = NMI_LOCAL_APIC;
- else
- nmi_watchdog = NMI_IO_APIC;
- }
-
- if (nmi_watchdog == NMI_LOCAL_APIC) {
- if (nmi_watchdog_enabled)
- enable_lapic_nmi_watchdog();
- else
- disable_lapic_nmi_watchdog();
- } else {
- printk( KERN_WARNING
- "NMI watchdog doesn't know what hardware to touch\n");
- return -EIO;
- }
- return 0;
-}
-
-#endif
-
-int do_nmi_callback(struct pt_regs *regs, int cpu)
-{
-#ifdef CONFIG_SYSCTL
- if (unknown_nmi_panic)
- return unknown_nmi_panic_callback(regs, cpu);
-#endif
- return 0;
-}
-
-void __trigger_all_cpu_backtrace(void)
-{
- int i;
-
- backtrace_mask = cpu_online_map;
- /* Wait for up to 10 seconds for all CPUs to do the backtrace */
- for (i = 0; i < 10 * 1000; i++) {
- if (cpus_empty(backtrace_mask))
- break;
- mdelay(1);
- }
-}
-
-EXPORT_SYMBOL(nmi_active);
-EXPORT_SYMBOL(nmi_watchdog);
diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c
deleted file mode 100644
index 5a29ded..0000000
--- a/arch/x86/kernel/nmi_64.c
+++ /dev/null
@@ -1,482 +0,0 @@
-/*
- * NMI watchdog support on APIC systems
- *
- * Started by Ingo Molnar <mingo@...hat.com>
- *
- * Fixes:
- * Mikael Pettersson : AMD K7 support for local APIC NMI watchdog.
- * Mikael Pettersson : Power Management for local APIC NMI watchdog.
- * Pavel Machek and
- * Mikael Pettersson : PM converted to driver model. Disable/enable API.
- */
-
-#include <linux/nmi.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/sysdev.h>
-#include <linux/sysctl.h>
-#include <linux/kprobes.h>
-#include <linux/cpumask.h>
-#include <linux/kdebug.h>
-
-#include <asm/smp.h>
-#include <asm/nmi.h>
-#include <asm/proto.h>
-#include <asm/mce.h>
-
-#include <mach_traps.h>
-
-int unknown_nmi_panic;
-int nmi_watchdog_enabled;
-int panic_on_unrecovered_nmi;
-
-static cpumask_t backtrace_mask = CPU_MASK_NONE;
-
-/* nmi_active:
- * >0: the lapic NMI watchdog is active, but can be disabled
- * <0: the lapic NMI watchdog has not been set up, and cannot
- * be enabled
- * 0: the lapic NMI watchdog is disabled, but can be enabled
- */
-atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */
-static int panic_on_timeout;
-
-unsigned int nmi_watchdog = NMI_DEFAULT;
-static unsigned int nmi_hz = HZ;
-
-static DEFINE_PER_CPU(short, wd_enabled);
-
-/* Run after command line and cpu_init init, but before all other checks */
-void nmi_watchdog_default(void)
-{
- if (nmi_watchdog != NMI_DEFAULT)
- return;
- nmi_watchdog = NMI_NONE;
-}
-
-static int endflag __initdata = 0;
-
-#ifdef CONFIG_SMP
-/* The performance counters used by NMI_LOCAL_APIC don't trigger when
- * the CPU is idle. To make sure the NMI watchdog really ticks on all
- * CPUs during the test make them busy.
- */
-static __init void nmi_cpu_busy(void *data)
-{
- local_irq_enable_in_hardirq();
- /* Intentionally don't use cpu_relax here. This is
- to make sure that the performance counter really ticks,
- even if there is a simulator or similar that catches the
- pause instruction. On a real HT machine this is fine because
- all other CPUs are busy with "useless" delay loops and don't
- care if they get somewhat less cycles. */
- while (endflag == 0)
- mb();
-}
-#endif
-
-int __init check_nmi_watchdog(void)
-{
- int *prev_nmi_count;
- int cpu;
-
- if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DISABLED))
- return 0;
-
- if (!atomic_read(&nmi_active))
- return 0;
-
- prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
- if (!prev_nmi_count)
- return -1;
-
- printk(KERN_INFO "Testing NMI watchdog ... ");
-
-#ifdef CONFIG_SMP
- if (nmi_watchdog == NMI_LOCAL_APIC)
- smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0);
-#endif
-
- for (cpu = 0; cpu < NR_CPUS; cpu++)
- prev_nmi_count[cpu] = cpu_pda(cpu)->__nmi_count;
- local_irq_enable();
- mdelay((20*1000)/nmi_hz); // wait 20 ticks
-
- for_each_online_cpu(cpu) {
- if (!per_cpu(wd_enabled, cpu))
- continue;
- if (cpu_pda(cpu)->__nmi_count - prev_nmi_count[cpu] <= 5) {
- printk(KERN_WARNING "WARNING: CPU#%d: NMI "
- "appears to be stuck (%d->%d)!\n",
- cpu,
- prev_nmi_count[cpu],
- cpu_pda(cpu)->__nmi_count);
- per_cpu(wd_enabled, cpu) = 0;
- atomic_dec(&nmi_active);
- }
- }
- endflag = 1;
- if (!atomic_read(&nmi_active)) {
- kfree(prev_nmi_count);
- atomic_set(&nmi_active, -1);
- return -1;
- }
- printk("OK.\n");
-
- /* now that we know it works we can reduce NMI frequency to
- something more reasonable; makes a difference in some configs */
- if (nmi_watchdog == NMI_LOCAL_APIC)
- nmi_hz = lapic_adjust_nmi_hz(1);
-
- kfree(prev_nmi_count);
- return 0;
-}
-
-static int __init setup_nmi_watchdog(char *str)
-{
- int nmi;
-
- if (!strncmp(str,"panic",5)) {
- panic_on_timeout = 1;
- str = strchr(str, ',');
- if (!str)
- return 1;
- ++str;
- }
-
- get_option(&str, &nmi);
-
- if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE))
- return 0;
-
- nmi_watchdog = nmi;
- return 1;
-}
-
-__setup("nmi_watchdog=", setup_nmi_watchdog);
-
-#ifdef CONFIG_PM
-
-static int nmi_pm_active; /* nmi_active before suspend */
-
-static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state)
-{
- /* only CPU0 goes here, other CPUs should be offline */
- nmi_pm_active = atomic_read(&nmi_active);
- stop_apic_nmi_watchdog(NULL);
- BUG_ON(atomic_read(&nmi_active) != 0);
- return 0;
-}
-
-static int lapic_nmi_resume(struct sys_device *dev)
-{
- /* only CPU0 goes here, other CPUs should be offline */
- if (nmi_pm_active > 0) {
- setup_apic_nmi_watchdog(NULL);
- touch_nmi_watchdog();
- }
- return 0;
-}
-
-static struct sysdev_class nmi_sysclass = {
- .name = "lapic_nmi",
- .resume = lapic_nmi_resume,
- .suspend = lapic_nmi_suspend,
-};
-
-static struct sys_device device_lapic_nmi = {
- .id = 0,
- .cls = &nmi_sysclass,
-};
-
-static int __init init_lapic_nmi_sysfs(void)
-{
- int error;
-
- /* should really be a BUG_ON but b/c this is an
- * init call, it just doesn't work. -dcz
- */
- if (nmi_watchdog != NMI_LOCAL_APIC)
- return 0;
-
- if (atomic_read(&nmi_active) < 0)
- return 0;
-
- error = sysdev_class_register(&nmi_sysclass);
- if (!error)
- error = sysdev_register(&device_lapic_nmi);
- return error;
-}
-/* must come after the local APIC's device_initcall() */
-late_initcall(init_lapic_nmi_sysfs);
-
-#endif /* CONFIG_PM */
-
-static void __acpi_nmi_enable(void *__unused)
-{
- apic_write(APIC_LVT0, APIC_DM_NMI);
-}
-
-/*
- * Enable timer based NMIs on all CPUs:
- */
-void acpi_nmi_enable(void)
-{
- if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
- on_each_cpu(__acpi_nmi_enable, NULL, 0, 1);
-}
-
-static void __acpi_nmi_disable(void *__unused)
-{
- apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED);
-}
-
-/*
- * Disable timer based NMIs on all CPUs:
- */
-void acpi_nmi_disable(void)
-{
- if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
- on_each_cpu(__acpi_nmi_disable, NULL, 0, 1);
-}
-
-void setup_apic_nmi_watchdog(void *unused)
-{
- if (__get_cpu_var(wd_enabled))
- return;
-
- /* cheap hack to support suspend/resume */
- /* if cpu0 is not active neither should the other cpus */
- if ((smp_processor_id() != 0) && (atomic_read(&nmi_active) <= 0))
- return;
-
- switch (nmi_watchdog) {
- case NMI_LOCAL_APIC:
- __get_cpu_var(wd_enabled) = 1;
- if (lapic_watchdog_init(nmi_hz) < 0) {
- __get_cpu_var(wd_enabled) = 0;
- return;
- }
- /* FALL THROUGH */
- case NMI_IO_APIC:
- __get_cpu_var(wd_enabled) = 1;
- atomic_inc(&nmi_active);
- }
-}
-
-void stop_apic_nmi_watchdog(void *unused)
-{
- /* only support LOCAL and IO APICs for now */
- if ((nmi_watchdog != NMI_LOCAL_APIC) &&
- (nmi_watchdog != NMI_IO_APIC))
- return;
- if (__get_cpu_var(wd_enabled) == 0)
- return;
- if (nmi_watchdog == NMI_LOCAL_APIC)
- lapic_watchdog_stop();
- __get_cpu_var(wd_enabled) = 0;
- atomic_dec(&nmi_active);
-}
-
-/*
- * the best way to detect whether a CPU has a 'hard lockup' problem
- * is to check it's local APIC timer IRQ counts. If they are not
- * changing then that CPU has some problem.
- *
- * as these watchdog NMI IRQs are generated on every CPU, we only
- * have to check the current processor.
- */
-
-static DEFINE_PER_CPU(unsigned, last_irq_sum);
-static DEFINE_PER_CPU(local_t, alert_counter);
-static DEFINE_PER_CPU(int, nmi_touch);
-
-void touch_nmi_watchdog(void)
-{
- if (nmi_watchdog > 0) {
- unsigned cpu;
-
- /*
- * Tell other CPUs to reset their alert counters. We cannot
- * do it ourselves because the alert count increase is not
- * atomic.
- */
- for_each_present_cpu(cpu) {
- if (per_cpu(nmi_touch, cpu) != 1)
- per_cpu(nmi_touch, cpu) = 1;
- }
- }
-
- touch_softlockup_watchdog();
-}
-EXPORT_SYMBOL(touch_nmi_watchdog);
-
-notrace __kprobes int
-nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
-{
- int sum;
- int touched = 0;
- int cpu = smp_processor_id();
- int rc = 0;
-
- /* check for other users first */
- if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT)
- == NOTIFY_STOP) {
- rc = 1;
- touched = 1;
- }
-
- sum = read_pda(apic_timer_irqs) + read_pda(irq0_irqs);
- if (__get_cpu_var(nmi_touch)) {
- __get_cpu_var(nmi_touch) = 0;
- touched = 1;
- }
-
- if (cpu_isset(cpu, backtrace_mask)) {
- static DEFINE_SPINLOCK(lock); /* Serialise the printks */
-
- spin_lock(&lock);
- printk("NMI backtrace for cpu %d\n", cpu);
- dump_stack();
- spin_unlock(&lock);
- cpu_clear(cpu, backtrace_mask);
- }
-
-#ifdef CONFIG_X86_MCE
- /* Could check oops_in_progress here too, but it's safer
- not too */
- if (atomic_read(&mce_entry) > 0)
- touched = 1;
-#endif
- /* if the apic timer isn't firing, this cpu isn't doing much */
- if (!touched && __get_cpu_var(last_irq_sum) == sum) {
- /*
- * Ayiee, looks like this CPU is stuck ...
- * wait a few IRQs (5 seconds) before doing the oops ...
- */
- local_inc(&__get_cpu_var(alert_counter));
- if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz)
- die_nmi("NMI Watchdog detected LOCKUP on CPU %d\n", regs,
- panic_on_timeout);
- } else {
- __get_cpu_var(last_irq_sum) = sum;
- local_set(&__get_cpu_var(alert_counter), 0);
- }
-
- /* see if the nmi watchdog went off */
- if (!__get_cpu_var(wd_enabled))
- return rc;
- switch (nmi_watchdog) {
- case NMI_LOCAL_APIC:
- rc |= lapic_wd_event(nmi_hz);
- break;
- case NMI_IO_APIC:
- /* don't know how to accurately check for this.
- * just assume it was a watchdog timer interrupt
- * This matches the old behaviour.
- */
- rc = 1;
- break;
- }
- return rc;
-}
-
-static unsigned ignore_nmis;
-
-asmlinkage notrace __kprobes void
-do_nmi(struct pt_regs *regs, long error_code)
-{
- nmi_enter();
- add_pda(__nmi_count,1);
- if (!ignore_nmis)
- default_do_nmi(regs);
- nmi_exit();
-}
-
-void stop_nmi(void)
-{
- acpi_nmi_disable();
- ignore_nmis++;
-}
-
-void restart_nmi(void)
-{
- ignore_nmis--;
- acpi_nmi_enable();
-}
-
-#ifdef CONFIG_SYSCTL
-
-static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
-{
- unsigned char reason = get_nmi_reason();
- char buf[64];
-
- sprintf(buf, "NMI received for unknown reason %02x\n", reason);
- die_nmi(buf, regs, 1); /* Always panic here */
- return 0;
-}
-
-/*
- * proc handler for /proc/sys/kernel/nmi
- */
-int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file,
- void __user *buffer, size_t *length, loff_t *ppos)
-{
- int old_state;
-
- nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0;
- old_state = nmi_watchdog_enabled;
- proc_dointvec(table, write, file, buffer, length, ppos);
- if (!!old_state == !!nmi_watchdog_enabled)
- return 0;
-
- if (atomic_read(&nmi_active) < 0 || nmi_watchdog == NMI_DISABLED) {
- printk( KERN_WARNING "NMI watchdog is permanently disabled\n");
- return -EIO;
- }
-
- /* if nmi_watchdog is not set yet, then set it */
- nmi_watchdog_default();
-
- if (nmi_watchdog == NMI_LOCAL_APIC) {
- if (nmi_watchdog_enabled)
- enable_lapic_nmi_watchdog();
- else
- disable_lapic_nmi_watchdog();
- } else {
- printk( KERN_WARNING
- "NMI watchdog doesn't know what hardware to touch\n");
- return -EIO;
- }
- return 0;
-}
-
-#endif
-
-int do_nmi_callback(struct pt_regs *regs, int cpu)
-{
-#ifdef CONFIG_SYSCTL
- if (unknown_nmi_panic)
- return unknown_nmi_panic_callback(regs, cpu);
-#endif
- return 0;
-}
-
-void __trigger_all_cpu_backtrace(void)
-{
- int i;
-
- backtrace_mask = cpu_online_map;
- /* Wait for up to 10 seconds for all CPUs to do the backtrace */
- for (i = 0; i < 10 * 1000; i++) {
- if (cpus_empty(backtrace_mask))
- break;
- mdelay(1);
- }
-}
-
-EXPORT_SYMBOL(nmi_active);
-EXPORT_SYMBOL(nmi_watchdog);
diff --git a/arch/x86/kernel/traps_32.c b/arch/x86/kernel/traps_32.c
index bde6f63..f31e665 100644
--- a/arch/x86/kernel/traps_32.c
+++ b/arch/x86/kernel/traps_32.c
@@ -755,9 +755,9 @@ unknown_nmi_error(unsigned char reason, struct pt_regs *regs)
static DEFINE_SPINLOCK(nmi_print_lock);
-void notrace __kprobes die_nmi(struct pt_regs *regs, const char *msg)
+void notrace __kprobes die_nmi(char *str, struct pt_regs *regs, int do_panic)
{
- if (notify_die(DIE_NMIWATCHDOG, msg, regs, 0, 2, SIGINT) == NOTIFY_STOP)
+ if (notify_die(DIE_NMIWATCHDOG, str, regs, 0, 2, SIGINT) == NOTIFY_STOP)
return;
spin_lock(&nmi_print_lock);
@@ -766,10 +766,12 @@ void notrace __kprobes die_nmi(struct pt_regs *regs, const char *msg)
* to get a message out:
*/
bust_spinlocks(1);
- printk(KERN_EMERG "%s", msg);
+ printk(KERN_EMERG "%s", str);
printk(" on CPU%d, ip %08lx, registers:\n",
smp_processor_id(), regs->ip);
show_registers(regs);
+ if (do_panic)
+ panic("Non maskable interrupt");
console_silent();
spin_unlock(&nmi_print_lock);
bust_spinlocks(0);
diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c
index adff76e..6113df8 100644
--- a/arch/x86/kernel/traps_64.c
+++ b/arch/x86/kernel/traps_64.c
@@ -76,6 +76,7 @@ asmlinkage void alignment_check(void);
asmlinkage void machine_check(void);
asmlinkage void spurious_interrupt_bug(void);
+int panic_on_unrecovered_nmi;
static unsigned int code_bytes = 64;
static inline void conditional_sti(struct pt_regs *regs)
@@ -614,7 +615,9 @@ die_nmi(char *str, struct pt_regs *regs, int do_panic)
* We are in trouble anyway, lets at least try
* to get a message out.
*/
- printk(str, smp_processor_id());
+ printk(KERN_EMERG "%s", str);
+ printk(" on CPU%d, ip %08lx, registers:\n",
+ smp_processor_id(), regs->ip);
show_registers(regs);
if (kexec_should_crash(current))
crash_kexec(regs);
diff --git a/include/asm-x86/nmi.h b/include/asm-x86/nmi.h
index 1e36302..2c5c4be 100644
--- a/include/asm-x86/nmi.h
+++ b/include/asm-x86/nmi.h
@@ -38,12 +38,10 @@ static inline void unset_nmi_pm_callback(struct pm_dev *dev)
#ifdef CONFIG_X86_64
extern void default_do_nmi(struct pt_regs *);
-extern void die_nmi(char *str, struct pt_regs *regs, int do_panic);
-extern void nmi_watchdog_default(void);
-#else
-#define nmi_watchdog_default() do {} while (0)
#endif
+extern void nmi_watchdog_default(void);
+extern void die_nmi(char *str, struct pt_regs *regs, int do_panic);
extern int check_nmi_watchdog(void);
extern int nmi_watchdog_enabled;
extern int unknown_nmi_panic;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists