| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20080521192129.GE6932@cvg>
Date: Wed, 21 May 2008 23:21:29 +0400
From: Cyrill Gorcunov <gorcunov@...il.com>
To: Hiroshi Shimamoto <h-shimamoto@...jp.nec.com>
Cc: Ingo Molnar <mingo@...e.hu>, Thomas Gleixner <tglx@...utronix.de>,
"H. Peter Anvin" <hpa@...or.com>, Jiri Slaby <jirislaby@...il.com>,
LKML <linux-kernel@...r.kernel.org>,
"Maciej W. Rozycki" <macro@...ux-mips.org>,
Jeremy Fitzhardinge <jeremy@...p.org>,
Andi Kleen <andi@...stfloor.org>
Subject: Re: [RFC] x86: merging nmi 32/64 to nmi.c v2
[Hiroshi Shimamoto - Wed, May 21, 2008 at 11:20:17AM -0700]
| Cyrill Gorcunov wrote:
| > This is a second attempt to merge nmi-32/64 to nmi.c
|
| Hi Cyrill,
|
| cool work!
|
| > Summary changes:
| >
| ...
| > - last_irq_sums and alert_counter was defined as static arrays in 32bit
| > mode, so they were changed to per_cpu variables
|
| This was already done, see http://lkml.org/lkml/2008/5/2/525.
| But it doesn't affect the unified file.
|
| > +#ifdef CONFIG_X86_64
| > +static unsigned ignore_nmis;
| > +
| > +asmlinkage notrace __kprobes void
| > +do_nmi(struct pt_regs *regs, long error_code)
| > +{
| > + nmi_enter();
| > + add_pda(__nmi_count,1);
| > + if (!ignore_nmis)
| > + default_do_nmi(regs);
| > + nmi_exit();
| > +}
| > +
| > +void stop_nmi(void)
| > +{
| > + acpi_nmi_disable();
| > + ignore_nmis++;
| > +}
| > +
| > +void restart_nmi(void)
| > +{
| > + ignore_nmis--;
| > + acpi_nmi_enable();
| > +}
| > +#endif /* CONFIG_X86_64 */
|
| I'm guessing we can move these functions to traps_64.c.
| I've tried to move these functions from traps_32.c to nmi_32.c,
| but it caused build error on some 32bit configs.
|
| thanks,
| Hiroshi Shimamoto
|
Here is updated version (thanks Hiroshi) - I've moved these funcs
to traps_64.c and it's compiled just fine (so we are going closer
to merge someday even traps-32/64 ;)
---
arch/x86/kernel/Makefile | 2 +-
arch/x86/kernel/nmi.c | 551 ++++++++++++++++++++++++++++++++++++++++++++
arch/x86/kernel/nmi_32.c | 472 -------------------------------------
arch/x86/kernel/nmi_64.c | 482 --------------------------------------
arch/x86/kernel/traps_32.c | 8 +-
arch/x86/kernel/traps_64.c | 28 +++-
include/asm-x86/nmi.h | 6 +-
7 files changed, 586 insertions(+), 963 deletions(-)
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 5e618c3..d5dd666 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -53,7 +53,7 @@ obj-$(CONFIG_X86_32_SMP) += smpcommon.o
obj-$(CONFIG_X86_64_SMP) += tsc_sync.o smpcommon.o
obj-$(CONFIG_X86_TRAMPOLINE) += trampoline_$(BITS).o
obj-$(CONFIG_X86_MPPARSE) += mpparse.o
-obj-$(CONFIG_X86_LOCAL_APIC) += apic_$(BITS).o nmi_$(BITS).o
+obj-$(CONFIG_X86_LOCAL_APIC) += apic_$(BITS).o nmi.o
obj-$(CONFIG_X86_IO_APIC) += io_apic_$(BITS).o
obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups_32.o
obj-$(CONFIG_KEXEC) += machine_kexec_$(BITS).o
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
new file mode 100644
index 0000000..c025c79
--- /dev/null
+++ b/arch/x86/kernel/nmi.c
@@ -0,0 +1,551 @@
+/*
+ * NMI watchdog support on APIC systems
+ *
+ * Started by Ingo Molnar <mingo@...hat.com>
+ *
+ * Fixes:
+ * Mikael Pettersson : AMD K7 support for local APIC NMI watchdog.
+ * Mikael Pettersson : Power Management for local APIC NMI watchdog.
+ * Mikael Pettersson : Pentium 4 support for local APIC NMI watchdog.
+ * Pavel Machek and
+ * Mikael Pettersson : PM converted to driver model. Disable/enable API.
+ */
+
+#include <linux/nmi.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/sysdev.h>
+#include <linux/sysctl.h>
+#include <linux/kprobes.h>
+#include <linux/cpumask.h>
+#include <linux/kdebug.h>
+#include <linux/kernel_stat.h>
+
+#include <asm/smp.h>
+#include <asm/nmi.h>
+#include <asm/proto.h>
+#include <asm/mce.h>
+#include <asm/timer.h>
+
+#include <mach_traps.h>
+
+int unknown_nmi_panic;
+int nmi_watchdog_enabled;
+
+static int panic_on_timeout;
+
+static cpumask_t backtrace_mask = CPU_MASK_NONE;
+
+/*
+ * nmi_active
+ * >0: the lapic NMI watchdog is active, but can be disabled
+ * <0: the lapic NMI watchdog has not been set up, and cannot
+ * be enabled
+ * 0: the lapic NMI watchdog is disabled, but can be enabled
+ */
+atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */
+unsigned int nmi_watchdog = NMI_DEFAULT;
+
+static DEFINE_PER_CPU(short, wd_enabled);
+static unsigned int nmi_hz = HZ;
+static int endflag __initdata = 0;
+
+static inline unsigned int get_nmi_count(int cpu)
+{
+#ifdef CONFIG_X86_64
+ return cpu_pda(cpu)->__nmi_count;
+#else
+ return nmi_count(cpu);
+#endif
+}
+
+static inline int mce_in_progress(void)
+{
+#if defined(CONFIX_X86_64) && defined(CONFIG_X86_MCE)
+ return atomic_read(&mce_entry) > 0;
+#endif
+ return 0;
+}
+
+/*
+ * Take the local apic timer and PIT/HPET into account. We don't
+ * know which one is active, when we have highres/dyntick on
+ */
+static inline unsigned int get_timer_irqs(int cpu)
+{
+#ifdef CONFIG_X86_64
+ return read_pda(apic_timer_irqs) + read_pda(irq0_irqs);
+#else
+ return per_cpu(irq_stat, cpu).apic_timer_irqs +
+ per_cpu(irq_stat, cpu).irq0_irqs;
+#endif
+}
+
+/* Run after command line and cpu_init init, but before all other checks */
+void nmi_watchdog_default(void)
+{
+ if (nmi_watchdog != NMI_DEFAULT)
+ return;
+#ifdef CONFIG_X86_64
+ nmi_watchdog = NMI_NONE;
+#else
+ if (lapic_watchdog_ok())
+ nmi_watchdog = NMI_LOCAL_APIC;
+ else
+ nmi_watchdog = NMI_IO_APIC;
+#endif
+}
+
+#ifdef CONFIG_SMP
+/*
+ * The performance counters used by NMI_LOCAL_APIC don't trigger when
+ * the CPU is idle. To make sure the NMI watchdog really ticks on all
+ * CPUs during the test make them busy.
+ */
+static __init void nmi_cpu_busy(void *data)
+{
+ local_irq_enable_in_hardirq();
+ /*
+ * Intentionally don't use cpu_relax here. This is
+ * to make sure that the performance counter really ticks,
+ * even if there is a simulator or similar that catches the
+ * pause instruction. On a real HT machine this is fine because
+ * all other CPUs are busy with "useless" delay loops and don't
+ * care if they get somewhat less cycles.
+ */
+ while (endflag == 0)
+ mb();
+}
+#endif /* CONFIG_SMP */
+
+int __init check_nmi_watchdog(void)
+{
+ unsigned int *prev_nmi_count;
+ int cpu;
+
+ if (nmi_watchdog == NMI_NONE || nmi_watchdog == NMI_DISABLED)
+ return 0;
+
+ if (!atomic_read(&nmi_active))
+ return 0;
+
+ prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
+ if (!prev_nmi_count)
+ goto error;
+
+ printk(KERN_INFO "Testing NMI watchdog ... ");
+
+#ifdef CONFIG_SMP
+ if (nmi_watchdog == NMI_LOCAL_APIC)
+ smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0);
+#endif
+
+ for_each_possible_cpu(cpu)
+ prev_nmi_count[cpu] = get_nmi_count(cpu);
+
+ local_irq_enable();
+ mdelay((20 * 1000) / nmi_hz); /* wait for 20 ticks */
+
+ for_each_online_cpu(cpu) {
+ if (!per_cpu(wd_enabled, cpu))
+ continue;
+ if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) {
+ printk(KERN_WARNING "WARNING: CPU#%d: NMI "
+ "appears to be stuck (%d->%d)!\n",
+ cpu,
+ prev_nmi_count[cpu],
+ get_nmi_count(cpu));
+ per_cpu(wd_enabled, cpu) = 0;
+ atomic_dec(&nmi_active);
+ }
+ }
+ endflag = 1;
+ if (!atomic_read(&nmi_active)) {
+ kfree(prev_nmi_count);
+ atomic_set(&nmi_active, -1);
+ goto error;
+ }
+ printk("OK.\n");
+
+ /*
+ * now that we know it works we can reduce NMI frequency to
+ * something more reasonable; makes a difference in some configs
+ */
+ if (nmi_watchdog == NMI_LOCAL_APIC)
+ nmi_hz = lapic_adjust_nmi_hz(1);
+
+ kfree(prev_nmi_count);
+ return 0;
+
+error:
+#ifdef CONFIG_X86_32
+ timer_ack = !cpu_has_tsc;
+#endif
+ return -1;
+}
+
+static int __init setup_nmi_watchdog(char *str)
+{
+ int nmi;
+
+ if (!strncmp(str, "panic", 5)) {
+ panic_on_timeout = 1;
+ str = strchr(str, ',');
+ if (!str)
+ return 1;
+ ++str;
+ }
+
+ get_option(&str, &nmi);
+ if (nmi >= NMI_INVALID || nmi < NMI_NONE)
+ return 0;
+
+ nmi_watchdog = nmi;
+
+ return 1;
+}
+__setup("nmi_watchdog=", setup_nmi_watchdog);
+
+/* Suspend/resume support */
+#ifdef CONFIG_PM
+
+static int nmi_pm_active; /* nmi_active before suspend */
+
+static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state)
+{
+ /* only CPU0 goes here, other CPUs should be offline */
+ nmi_pm_active = atomic_read(&nmi_active);
+ stop_apic_nmi_watchdog(NULL);
+ BUG_ON(atomic_read(&nmi_active) != 0);
+ return 0;
+}
+
+static int lapic_nmi_resume(struct sys_device *dev)
+{
+ /* only CPU0 goes here, other CPUs should be offline */
+ if (nmi_pm_active > 0) {
+ setup_apic_nmi_watchdog(NULL);
+ touch_nmi_watchdog();
+ }
+ return 0;
+}
+
+static struct sysdev_class nmi_sysclass = {
+ .name = "lapic_nmi",
+ .resume = lapic_nmi_resume,
+ .suspend = lapic_nmi_suspend,
+};
+
+static struct sys_device device_lapic_nmi = {
+ .id = 0,
+ .cls = &nmi_sysclass,
+};
+
+static int __init init_lapic_nmi_sysfs(void)
+{
+ int error;
+
+ /*
+ * should really be a BUG_ON but b/c this is an
+ * init call, it just doesn't work. -dcz
+ */
+ if (nmi_watchdog != NMI_LOCAL_APIC)
+ return 0;
+
+ if (atomic_read(&nmi_active) < 0)
+ return 0;
+
+ error = sysdev_class_register(&nmi_sysclass);
+ if (!error)
+ error = sysdev_register(&device_lapic_nmi);
+
+ return error;
+}
+/* must come after the local APIC's device_initcall() */
+late_initcall(init_lapic_nmi_sysfs);
+
+#endif /* CONFIG_PM */
+
+static void __acpi_nmi_enable(void *__unused)
+{
+ apic_write_around(APIC_LVT0, APIC_DM_NMI);
+}
+
+/* Enable timer based NMIs on all CPUs */
+void acpi_nmi_enable(void)
+{
+ if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
+ on_each_cpu(__acpi_nmi_enable, NULL, 0, 1);
+}
+
+static void __acpi_nmi_disable(void *__unused)
+{
+ apic_write_around(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED);
+}
+
+/* Disable timer based NMIs on all CPUs */
+void acpi_nmi_disable(void)
+{
+ if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
+ on_each_cpu(__acpi_nmi_disable, NULL, 0, 1);
+}
+
+void setup_apic_nmi_watchdog(void *unused)
+{
+ if (__get_cpu_var(wd_enabled))
+ return;
+
+ /* cheap hack to support suspend/resume */
+ /* if cpu0 is not active neither should the other cpus */
+ if (smp_processor_id() != 0 && atomic_read(&nmi_active) <= 0)
+ return;
+
+ switch (nmi_watchdog) {
+ case NMI_LOCAL_APIC:
+ __get_cpu_var(wd_enabled) = 1;
+ if (lapic_watchdog_init(nmi_hz) < 0) {
+ __get_cpu_var(wd_enabled) = 0;
+ return;
+ }
+ /* FALL THROUGH */
+ case NMI_IO_APIC:
+ __get_cpu_var(wd_enabled) = 1;
+ atomic_inc(&nmi_active);
+ }
+}
+
+void stop_apic_nmi_watchdog(void *unused)
+{
+ /* only support LOCAL and IO APICs for now */
+ if (nmi_watchdog != NMI_LOCAL_APIC &&
+ nmi_watchdog != NMI_IO_APIC)
+ return;
+ if (__get_cpu_var(wd_enabled) == 0)
+ return;
+ if (nmi_watchdog == NMI_LOCAL_APIC)
+ lapic_watchdog_stop();
+ __get_cpu_var(wd_enabled) = 0;
+ atomic_dec(&nmi_active);
+}
+
+/*
+ * the best way to detect whether a CPU has a 'hard lockup' problem
+ * is to check it's local APIC timer IRQ counts. If they are not
+ * changing then that CPU has some problem.
+ *
+ * as these watchdog NMI IRQs are generated on every CPU, we only
+ * have to check the current processor.
+ *
+ * since NMIs don't listen to _any_ locks, we have to be extremely
+ * careful not to rely on unsafe variables. The printk might lock
+ * up though, so we have to break up any console locks first ...
+ * [when there will be more tty-related locks, break them up here too!]
+ */
+
+static DEFINE_PER_CPU(unsigned, last_irq_sum);
+static DEFINE_PER_CPU(local_t, alert_counter);
+static DEFINE_PER_CPU(int, nmi_touch);
+
+void touch_nmi_watchdog(void)
+{
+ if (nmi_watchdog > 0) {
+ unsigned cpu;
+
+ /*
+ * Tell other CPUs to reset their alert counters. We cannot
+ * do it ourselves because the alert count increase is not
+ * atomic
+ */
+ for_each_present_cpu(cpu) {
+ if (per_cpu(nmi_touch, cpu) != 1)
+ per_cpu(nmi_touch, cpu) = 1;
+ }
+ }
+
+ /* Tickle the softlockup detector too */
+ touch_softlockup_watchdog();
+}
+EXPORT_SYMBOL(touch_nmi_watchdog);
+
+notrace __kprobes int
+nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
+{
+ /*
+ * Since current_thread_info()-> is always on the stack, and we
+ * always switch the stack NMI-atomically, it's safe to use
+ * smp_processor_id()
+ */
+ unsigned int sum;
+ int touched = 0;
+ int cpu = smp_processor_id();
+ int rc = 0;
+
+ /* check for other users first */
+ if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT)
+ == NOTIFY_STOP) {
+ rc = 1;
+ touched = 1;
+ }
+
+ sum = get_timer_irqs(cpu);
+
+ if (__get_cpu_var(nmi_touch)) {
+ __get_cpu_var(nmi_touch) = 0;
+ touched = 1;
+ }
+
+ if (cpu_isset(cpu, backtrace_mask)) {
+ static DEFINE_SPINLOCK(lock);
+ spin_lock(&lock);
+ printk("NMI backtrace for cpu %d\n", cpu);
+ dump_stack();
+ spin_unlock(&lock);
+ cpu_clear(cpu, backtrace_mask);
+ }
+
+ /*
+ * Could check oops_in_progress here too,
+ * but it's safer not to do
+ */
+ if (mce_in_progress())
+ touched = 1;
+
+ /* if the none of the timers isn't firing, this cpu isn't doing much */
+ if (!touched && __get_cpu_var(last_irq_sum) == sum) {
+ /*
+ * Ayiee, looks like this CPU is stuck ...
+ * wait a few IRQs (5 seconds) before doing the oops ...
+ */
+ local_inc(&__get_cpu_var(alert_counter));
+ if (local_read(&__get_cpu_var(alert_counter)) == 5 * nmi_hz)
+ die_nmi("NMI Watchdog detected LOCKUP\n",
+ regs, panic_on_timeout);
+ } else {
+ __get_cpu_var(last_irq_sum) = sum;
+ local_set(&__get_cpu_var(alert_counter), 0);
+ }
+
+ /* see if the nmi watchdog went off */
+ if (!__get_cpu_var(wd_enabled))
+ return rc;
+
+ switch (nmi_watchdog) {
+ case NMI_LOCAL_APIC:
+ rc |= lapic_wd_event(nmi_hz);
+ break;
+ case NMI_IO_APIC:
+ /*
+ * don't know how to accurately check for this.
+ * just assume it was a watchdog timer interrupt
+ * This matches the old behaviour.
+ */
+ rc = 1;
+ break;
+ }
+
+ return rc;
+}
+
+#ifdef CONFIG_X86_64
+static unsigned ignore_nmis;
+
+asmlinkage notrace __kprobes void
+do_nmi(struct pt_regs *regs, long error_code)
+{
+ nmi_enter();
+ add_pda(__nmi_count,1);
+ if (!ignore_nmis)
+ default_do_nmi(regs);
+ nmi_exit();
+}
+
+void stop_nmi(void)
+{
+ acpi_nmi_disable();
+ ignore_nmis++;
+}
+
+void restart_nmi(void)
+{
+ ignore_nmis--;
+ acpi_nmi_enable();
+}
+#endif /* CONFIG_X86_64 */
+
+#ifdef CONFIG_SYSCTL
+
+static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
+{
+ unsigned char reason = get_nmi_reason();
+ char buf[64];
+
+ sprintf(buf, "NMI received for unknown reason %02x\n", reason);
+ die_nmi(buf, regs, 1);
+ return 0;
+}
+
+/*
+ * proc handler for /proc/sys/kernel/nmi
+ */
+int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file,
+ void __user *buffer, size_t *length, loff_t *ppos)
+{
+ int old_state;
+
+ nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0;
+ old_state = nmi_watchdog_enabled;
+ proc_dointvec(table, write, file, buffer, length, ppos);
+ if (!!old_state == !!nmi_watchdog_enabled)
+ return 0;
+
+ if (atomic_read(&nmi_active) < 0 || nmi_watchdog == NMI_DISABLED) {
+ printk(KERN_WARNING
+ "NMI watchdog is permanently disabled\n");
+ return -EIO;
+ }
+
+ /* if nmi_watchdog is not set yet, then set it */
+ nmi_watchdog_default();
+
+ if (nmi_watchdog == NMI_LOCAL_APIC) {
+ if (nmi_watchdog_enabled)
+ enable_lapic_nmi_watchdog();
+ else
+ disable_lapic_nmi_watchdog();
+ } else {
+ printk(KERN_WARNING
+ "NMI watchdog doesn't know what hardware to touch\n");
+ return -EIO;
+ }
+ return 0;
+}
+
+#endif /* CONFIG_SYSCTL */
+
+int do_nmi_callback(struct pt_regs *regs, int cpu)
+{
+#ifdef CONFIG_SYSCTL
+ if (unknown_nmi_panic)
+ return unknown_nmi_panic_callback(regs, cpu);
+#endif
+ return 0;
+}
+
+void __trigger_all_cpu_backtrace(void)
+{
+ int i;
+
+ backtrace_mask = cpu_online_map;
+ /* Wait for up to 10 seconds for all CPUs to do the backtrace */
+ for (i = 0; i < 10 * 1000; i++) {
+ if (cpus_empty(backtrace_mask))
+ break;
+ mdelay(1);
+ }
+}
+
+EXPORT_SYMBOL(nmi_active);
+EXPORT_SYMBOL(nmi_watchdog);
+
diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c
deleted file mode 100644
index 11b14bb..0000000
--- a/arch/x86/kernel/nmi_32.c
+++ /dev/null
@@ -1,472 +0,0 @@
-/*
- * NMI watchdog support on APIC systems
- *
- * Started by Ingo Molnar <mingo@...hat.com>
- *
- * Fixes:
- * Mikael Pettersson : AMD K7 support for local APIC NMI watchdog.
- * Mikael Pettersson : Power Management for local APIC NMI watchdog.
- * Mikael Pettersson : Pentium 4 support for local APIC NMI watchdog.
- * Pavel Machek and
- * Mikael Pettersson : PM converted to driver model. Disable/enable API.
- */
-
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/nmi.h>
-#include <linux/sysdev.h>
-#include <linux/sysctl.h>
-#include <linux/percpu.h>
-#include <linux/kprobes.h>
-#include <linux/cpumask.h>
-#include <linux/kernel_stat.h>
-#include <linux/kdebug.h>
-#include <linux/slab.h>
-
-#include <asm/smp.h>
-#include <asm/nmi.h>
-#include <asm/timer.h>
-
-#include "mach_traps.h"
-
-int unknown_nmi_panic;
-int nmi_watchdog_enabled;
-
-static cpumask_t backtrace_mask = CPU_MASK_NONE;
-
-/* nmi_active:
- * >0: the lapic NMI watchdog is active, but can be disabled
- * <0: the lapic NMI watchdog has not been set up, and cannot
- * be enabled
- * 0: the lapic NMI watchdog is disabled, but can be enabled
- */
-atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */
-
-unsigned int nmi_watchdog = NMI_DEFAULT;
-static unsigned int nmi_hz = HZ;
-
-static DEFINE_PER_CPU(short, wd_enabled);
-
-static int endflag __initdata = 0;
-
-#ifdef CONFIG_SMP
-/* The performance counters used by NMI_LOCAL_APIC don't trigger when
- * the CPU is idle. To make sure the NMI watchdog really ticks on all
- * CPUs during the test make them busy.
- */
-static __init void nmi_cpu_busy(void *data)
-{
- local_irq_enable_in_hardirq();
- /* Intentionally don't use cpu_relax here. This is
- to make sure that the performance counter really ticks,
- even if there is a simulator or similar that catches the
- pause instruction. On a real HT machine this is fine because
- all other CPUs are busy with "useless" delay loops and don't
- care if they get somewhat less cycles. */
- while (endflag == 0)
- mb();
-}
-#endif
-
-int __init check_nmi_watchdog(void)
-{
- unsigned int *prev_nmi_count;
- int cpu;
-
- if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DISABLED))
- return 0;
-
- if (!atomic_read(&nmi_active))
- return 0;
-
- prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
- if (!prev_nmi_count)
- goto error;
-
- printk(KERN_INFO "Testing NMI watchdog ... ");
-
-#ifdef CONFIG_SMP
- if (nmi_watchdog == NMI_LOCAL_APIC)
- smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0);
-#endif
-
- for_each_possible_cpu(cpu)
- prev_nmi_count[cpu] = nmi_count(cpu);
- local_irq_enable();
- mdelay((20*1000)/nmi_hz); // wait 20 ticks
-
- for_each_possible_cpu(cpu) {
-#ifdef CONFIG_SMP
- /* Check cpu_callin_map here because that is set
- after the timer is started. */
- if (!cpu_isset(cpu, cpu_callin_map))
- continue;
-#endif
- if (!per_cpu(wd_enabled, cpu))
- continue;
- if (nmi_count(cpu) - prev_nmi_count[cpu] <= 5) {
- printk(KERN_WARNING "WARNING: CPU#%d: NMI "
- "appears to be stuck (%d->%d)!\n",
- cpu,
- prev_nmi_count[cpu],
- nmi_count(cpu));
- per_cpu(wd_enabled, cpu) = 0;
- atomic_dec(&nmi_active);
- }
- }
- endflag = 1;
- if (!atomic_read(&nmi_active)) {
- kfree(prev_nmi_count);
- atomic_set(&nmi_active, -1);
- goto error;
- }
- printk("OK.\n");
-
- /* now that we know it works we can reduce NMI frequency to
- something more reasonable; makes a difference in some configs */
- if (nmi_watchdog == NMI_LOCAL_APIC)
- nmi_hz = lapic_adjust_nmi_hz(1);
-
- kfree(prev_nmi_count);
- return 0;
-error:
- timer_ack = !cpu_has_tsc;
-
- return -1;
-}
-
-static int __init setup_nmi_watchdog(char *str)
-{
- int nmi;
-
- get_option(&str, &nmi);
-
- if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE))
- return 0;
-
- nmi_watchdog = nmi;
- return 1;
-}
-
-__setup("nmi_watchdog=", setup_nmi_watchdog);
-
-
-/* Suspend/resume support */
-
-#ifdef CONFIG_PM
-
-static int nmi_pm_active; /* nmi_active before suspend */
-
-static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state)
-{
- /* only CPU0 goes here, other CPUs should be offline */
- nmi_pm_active = atomic_read(&nmi_active);
- stop_apic_nmi_watchdog(NULL);
- BUG_ON(atomic_read(&nmi_active) != 0);
- return 0;
-}
-
-static int lapic_nmi_resume(struct sys_device *dev)
-{
- /* only CPU0 goes here, other CPUs should be offline */
- if (nmi_pm_active > 0) {
- setup_apic_nmi_watchdog(NULL);
- touch_nmi_watchdog();
- }
- return 0;
-}
-
-
-static struct sysdev_class nmi_sysclass = {
- .name = "lapic_nmi",
- .resume = lapic_nmi_resume,
- .suspend = lapic_nmi_suspend,
-};
-
-static struct sys_device device_lapic_nmi = {
- .id = 0,
- .cls = &nmi_sysclass,
-};
-
-static int __init init_lapic_nmi_sysfs(void)
-{
- int error;
-
- /* should really be a BUG_ON but b/c this is an
- * init call, it just doesn't work. -dcz
- */
- if (nmi_watchdog != NMI_LOCAL_APIC)
- return 0;
-
- if (atomic_read(&nmi_active) < 0)
- return 0;
-
- error = sysdev_class_register(&nmi_sysclass);
- if (!error)
- error = sysdev_register(&device_lapic_nmi);
- return error;
-}
-/* must come after the local APIC's device_initcall() */
-late_initcall(init_lapic_nmi_sysfs);
-
-#endif /* CONFIG_PM */
-
-static void __acpi_nmi_enable(void *__unused)
-{
- apic_write_around(APIC_LVT0, APIC_DM_NMI);
-}
-
-/*
- * Enable timer based NMIs on all CPUs:
- */
-void acpi_nmi_enable(void)
-{
- if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
- on_each_cpu(__acpi_nmi_enable, NULL, 0, 1);
-}
-
-static void __acpi_nmi_disable(void *__unused)
-{
- apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED);
-}
-
-/*
- * Disable timer based NMIs on all CPUs:
- */
-void acpi_nmi_disable(void)
-{
- if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
- on_each_cpu(__acpi_nmi_disable, NULL, 0, 1);
-}
-
-void setup_apic_nmi_watchdog(void *unused)
-{
- if (__get_cpu_var(wd_enabled))
- return;
-
- /* cheap hack to support suspend/resume */
- /* if cpu0 is not active neither should the other cpus */
- if ((smp_processor_id() != 0) && (atomic_read(&nmi_active) <= 0))
- return;
-
- switch (nmi_watchdog) {
- case NMI_LOCAL_APIC:
- __get_cpu_var(wd_enabled) = 1; /* enable it before to avoid race with handler */
- if (lapic_watchdog_init(nmi_hz) < 0) {
- __get_cpu_var(wd_enabled) = 0;
- return;
- }
- /* FALL THROUGH */
- case NMI_IO_APIC:
- __get_cpu_var(wd_enabled) = 1;
- atomic_inc(&nmi_active);
- }
-}
-
-void stop_apic_nmi_watchdog(void *unused)
-{
- /* only support LOCAL and IO APICs for now */
- if ((nmi_watchdog != NMI_LOCAL_APIC) &&
- (nmi_watchdog != NMI_IO_APIC))
- return;
- if (__get_cpu_var(wd_enabled) == 0)
- return;
- if (nmi_watchdog == NMI_LOCAL_APIC)
- lapic_watchdog_stop();
- __get_cpu_var(wd_enabled) = 0;
- atomic_dec(&nmi_active);
-}
-
-/*
- * the best way to detect whether a CPU has a 'hard lockup' problem
- * is to check it's local APIC timer IRQ counts. If they are not
- * changing then that CPU has some problem.
- *
- * as these watchdog NMI IRQs are generated on every CPU, we only
- * have to check the current processor.
- *
- * since NMIs don't listen to _any_ locks, we have to be extremely
- * careful not to rely on unsafe variables. The printk might lock
- * up though, so we have to break up any console locks first ...
- * [when there will be more tty-related locks, break them up
- * here too!]
- */
-
-static unsigned int
- last_irq_sums [NR_CPUS],
- alert_counter [NR_CPUS];
-
-void touch_nmi_watchdog(void)
-{
- if (nmi_watchdog > 0) {
- unsigned cpu;
-
- /*
- * Just reset the alert counters, (other CPUs might be
- * spinning on locks we hold):
- */
- for_each_present_cpu(cpu) {
- if (alert_counter[cpu])
- alert_counter[cpu] = 0;
- }
- }
-
- /*
- * Tickle the softlockup detector too:
- */
- touch_softlockup_watchdog();
-}
-EXPORT_SYMBOL(touch_nmi_watchdog);
-
-extern void die_nmi(struct pt_regs *, const char *msg);
-
-notrace __kprobes int
-nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
-{
-
- /*
- * Since current_thread_info()-> is always on the stack, and we
- * always switch the stack NMI-atomically, it's safe to use
- * smp_processor_id().
- */
- unsigned int sum;
- int touched = 0;
- int cpu = smp_processor_id();
- int rc = 0;
-
- /* check for other users first */
- if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT)
- == NOTIFY_STOP) {
- rc = 1;
- touched = 1;
- }
-
- if (cpu_isset(cpu, backtrace_mask)) {
- static DEFINE_SPINLOCK(lock); /* Serialise the printks */
-
- spin_lock(&lock);
- printk("NMI backtrace for cpu %d\n", cpu);
- dump_stack();
- spin_unlock(&lock);
- cpu_clear(cpu, backtrace_mask);
- }
-
- /*
- * Take the local apic timer and PIT/HPET into account. We don't
- * know which one is active, when we have highres/dyntick on
- */
- sum = per_cpu(irq_stat, cpu).apic_timer_irqs +
- per_cpu(irq_stat, cpu).irq0_irqs;
-
- /* if the none of the timers isn't firing, this cpu isn't doing much */
- if (!touched && last_irq_sums[cpu] == sum) {
- /*
- * Ayiee, looks like this CPU is stuck ...
- * wait a few IRQs (5 seconds) before doing the oops ...
- */
- alert_counter[cpu]++;
- if (alert_counter[cpu] == 5*nmi_hz)
- /*
- * die_nmi will return ONLY if NOTIFY_STOP happens..
- */
- die_nmi(regs, "BUG: NMI Watchdog detected LOCKUP");
- } else {
- last_irq_sums[cpu] = sum;
- alert_counter[cpu] = 0;
- }
- /* see if the nmi watchdog went off */
- if (!__get_cpu_var(wd_enabled))
- return rc;
- switch (nmi_watchdog) {
- case NMI_LOCAL_APIC:
- rc |= lapic_wd_event(nmi_hz);
- break;
- case NMI_IO_APIC:
- /* don't know how to accurately check for this.
- * just assume it was a watchdog timer interrupt
- * This matches the old behaviour.
- */
- rc = 1;
- break;
- }
- return rc;
-}
-
-#ifdef CONFIG_SYSCTL
-
-static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
-{
- unsigned char reason = get_nmi_reason();
- char buf[64];
-
- sprintf(buf, "NMI received for unknown reason %02x\n", reason);
- die_nmi(regs, buf);
- return 0;
-}
-
-/*
- * proc handler for /proc/sys/kernel/nmi
- */
-int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file,
- void __user *buffer, size_t *length, loff_t *ppos)
-{
- int old_state;
-
- nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0;
- old_state = nmi_watchdog_enabled;
- proc_dointvec(table, write, file, buffer, length, ppos);
- if (!!old_state == !!nmi_watchdog_enabled)
- return 0;
-
- if (atomic_read(&nmi_active) < 0 || nmi_watchdog == NMI_DISABLED) {
- printk( KERN_WARNING "NMI watchdog is permanently disabled\n");
- return -EIO;
- }
-
- if (nmi_watchdog == NMI_DEFAULT) {
- if (lapic_watchdog_ok())
- nmi_watchdog = NMI_LOCAL_APIC;
- else
- nmi_watchdog = NMI_IO_APIC;
- }
-
- if (nmi_watchdog == NMI_LOCAL_APIC) {
- if (nmi_watchdog_enabled)
- enable_lapic_nmi_watchdog();
- else
- disable_lapic_nmi_watchdog();
- } else {
- printk( KERN_WARNING
- "NMI watchdog doesn't know what hardware to touch\n");
- return -EIO;
- }
- return 0;
-}
-
-#endif
-
-int do_nmi_callback(struct pt_regs *regs, int cpu)
-{
-#ifdef CONFIG_SYSCTL
- if (unknown_nmi_panic)
- return unknown_nmi_panic_callback(regs, cpu);
-#endif
- return 0;
-}
-
-void __trigger_all_cpu_backtrace(void)
-{
- int i;
-
- backtrace_mask = cpu_online_map;
- /* Wait for up to 10 seconds for all CPUs to do the backtrace */
- for (i = 0; i < 10 * 1000; i++) {
- if (cpus_empty(backtrace_mask))
- break;
- mdelay(1);
- }
-}
-
-EXPORT_SYMBOL(nmi_active);
-EXPORT_SYMBOL(nmi_watchdog);
diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c
deleted file mode 100644
index 5a29ded..0000000
--- a/arch/x86/kernel/nmi_64.c
+++ /dev/null
@@ -1,482 +0,0 @@
-/*
- * NMI watchdog support on APIC systems
- *
- * Started by Ingo Molnar <mingo@...hat.com>
- *
- * Fixes:
- * Mikael Pettersson : AMD K7 support for local APIC NMI watchdog.
- * Mikael Pettersson : Power Management for local APIC NMI watchdog.
- * Pavel Machek and
- * Mikael Pettersson : PM converted to driver model. Disable/enable API.
- */
-
-#include <linux/nmi.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/sysdev.h>
-#include <linux/sysctl.h>
-#include <linux/kprobes.h>
-#include <linux/cpumask.h>
-#include <linux/kdebug.h>
-
-#include <asm/smp.h>
-#include <asm/nmi.h>
-#include <asm/proto.h>
-#include <asm/mce.h>
-
-#include <mach_traps.h>
-
-int unknown_nmi_panic;
-int nmi_watchdog_enabled;
-int panic_on_unrecovered_nmi;
-
-static cpumask_t backtrace_mask = CPU_MASK_NONE;
-
-/* nmi_active:
- * >0: the lapic NMI watchdog is active, but can be disabled
- * <0: the lapic NMI watchdog has not been set up, and cannot
- * be enabled
- * 0: the lapic NMI watchdog is disabled, but can be enabled
- */
-atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */
-static int panic_on_timeout;
-
-unsigned int nmi_watchdog = NMI_DEFAULT;
-static unsigned int nmi_hz = HZ;
-
-static DEFINE_PER_CPU(short, wd_enabled);
-
-/* Run after command line and cpu_init init, but before all other checks */
-void nmi_watchdog_default(void)
-{
- if (nmi_watchdog != NMI_DEFAULT)
- return;
- nmi_watchdog = NMI_NONE;
-}
-
-static int endflag __initdata = 0;
-
-#ifdef CONFIG_SMP
-/* The performance counters used by NMI_LOCAL_APIC don't trigger when
- * the CPU is idle. To make sure the NMI watchdog really ticks on all
- * CPUs during the test make them busy.
- */
-static __init void nmi_cpu_busy(void *data)
-{
- local_irq_enable_in_hardirq();
- /* Intentionally don't use cpu_relax here. This is
- to make sure that the performance counter really ticks,
- even if there is a simulator or similar that catches the
- pause instruction. On a real HT machine this is fine because
- all other CPUs are busy with "useless" delay loops and don't
- care if they get somewhat less cycles. */
- while (endflag == 0)
- mb();
-}
-#endif
-
-int __init check_nmi_watchdog(void)
-{
- int *prev_nmi_count;
- int cpu;
-
- if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DISABLED))
- return 0;
-
- if (!atomic_read(&nmi_active))
- return 0;
-
- prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
- if (!prev_nmi_count)
- return -1;
-
- printk(KERN_INFO "Testing NMI watchdog ... ");
-
-#ifdef CONFIG_SMP
- if (nmi_watchdog == NMI_LOCAL_APIC)
- smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0);
-#endif
-
- for (cpu = 0; cpu < NR_CPUS; cpu++)
- prev_nmi_count[cpu] = cpu_pda(cpu)->__nmi_count;
- local_irq_enable();
- mdelay((20*1000)/nmi_hz); // wait 20 ticks
-
- for_each_online_cpu(cpu) {
- if (!per_cpu(wd_enabled, cpu))
- continue;
- if (cpu_pda(cpu)->__nmi_count - prev_nmi_count[cpu] <= 5) {
- printk(KERN_WARNING "WARNING: CPU#%d: NMI "
- "appears to be stuck (%d->%d)!\n",
- cpu,
- prev_nmi_count[cpu],
- cpu_pda(cpu)->__nmi_count);
- per_cpu(wd_enabled, cpu) = 0;
- atomic_dec(&nmi_active);
- }
- }
- endflag = 1;
- if (!atomic_read(&nmi_active)) {
- kfree(prev_nmi_count);
- atomic_set(&nmi_active, -1);
- return -1;
- }
- printk("OK.\n");
-
- /* now that we know it works we can reduce NMI frequency to
- something more reasonable; makes a difference in some configs */
- if (nmi_watchdog == NMI_LOCAL_APIC)
- nmi_hz = lapic_adjust_nmi_hz(1);
-
- kfree(prev_nmi_count);
- return 0;
-}
-
-static int __init setup_nmi_watchdog(char *str)
-{
- int nmi;
-
- if (!strncmp(str,"panic",5)) {
- panic_on_timeout = 1;
- str = strchr(str, ',');
- if (!str)
- return 1;
- ++str;
- }
-
- get_option(&str, &nmi);
-
- if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE))
- return 0;
-
- nmi_watchdog = nmi;
- return 1;
-}
-
-__setup("nmi_watchdog=", setup_nmi_watchdog);
-
-#ifdef CONFIG_PM
-
-static int nmi_pm_active; /* nmi_active before suspend */
-
-static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state)
-{
- /* only CPU0 goes here, other CPUs should be offline */
- nmi_pm_active = atomic_read(&nmi_active);
- stop_apic_nmi_watchdog(NULL);
- BUG_ON(atomic_read(&nmi_active) != 0);
- return 0;
-}
-
-static int lapic_nmi_resume(struct sys_device *dev)
-{
- /* only CPU0 goes here, other CPUs should be offline */
- if (nmi_pm_active > 0) {
- setup_apic_nmi_watchdog(NULL);
- touch_nmi_watchdog();
- }
- return 0;
-}
-
-static struct sysdev_class nmi_sysclass = {
- .name = "lapic_nmi",
- .resume = lapic_nmi_resume,
- .suspend = lapic_nmi_suspend,
-};
-
-static struct sys_device device_lapic_nmi = {
- .id = 0,
- .cls = &nmi_sysclass,
-};
-
-static int __init init_lapic_nmi_sysfs(void)
-{
- int error;
-
- /* should really be a BUG_ON but b/c this is an
- * init call, it just doesn't work. -dcz
- */
- if (nmi_watchdog != NMI_LOCAL_APIC)
- return 0;
-
- if (atomic_read(&nmi_active) < 0)
- return 0;
-
- error = sysdev_class_register(&nmi_sysclass);
- if (!error)
- error = sysdev_register(&device_lapic_nmi);
- return error;
-}
-/* must come after the local APIC's device_initcall() */
-late_initcall(init_lapic_nmi_sysfs);
-
-#endif /* CONFIG_PM */
-
-static void __acpi_nmi_enable(void *__unused)
-{
- apic_write(APIC_LVT0, APIC_DM_NMI);
-}
-
-/*
- * Enable timer based NMIs on all CPUs:
- */
-void acpi_nmi_enable(void)
-{
- if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
- on_each_cpu(__acpi_nmi_enable, NULL, 0, 1);
-}
-
-static void __acpi_nmi_disable(void *__unused)
-{
- apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED);
-}
-
-/*
- * Disable timer based NMIs on all CPUs:
- */
-void acpi_nmi_disable(void)
-{
- if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
- on_each_cpu(__acpi_nmi_disable, NULL, 0, 1);
-}
-
-void setup_apic_nmi_watchdog(void *unused)
-{
- if (__get_cpu_var(wd_enabled))
- return;
-
- /* cheap hack to support suspend/resume */
- /* if cpu0 is not active neither should the other cpus */
- if ((smp_processor_id() != 0) && (atomic_read(&nmi_active) <= 0))
- return;
-
- switch (nmi_watchdog) {
- case NMI_LOCAL_APIC:
- __get_cpu_var(wd_enabled) = 1;
- if (lapic_watchdog_init(nmi_hz) < 0) {
- __get_cpu_var(wd_enabled) = 0;
- return;
- }
- /* FALL THROUGH */
- case NMI_IO_APIC:
- __get_cpu_var(wd_enabled) = 1;
- atomic_inc(&nmi_active);
- }
-}
-
-void stop_apic_nmi_watchdog(void *unused)
-{
- /* only support LOCAL and IO APICs for now */
- if ((nmi_watchdog != NMI_LOCAL_APIC) &&
- (nmi_watchdog != NMI_IO_APIC))
- return;
- if (__get_cpu_var(wd_enabled) == 0)
- return;
- if (nmi_watchdog == NMI_LOCAL_APIC)
- lapic_watchdog_stop();
- __get_cpu_var(wd_enabled) = 0;
- atomic_dec(&nmi_active);
-}
-
-/*
- * the best way to detect whether a CPU has a 'hard lockup' problem
- * is to check it's local APIC timer IRQ counts. If they are not
- * changing then that CPU has some problem.
- *
- * as these watchdog NMI IRQs are generated on every CPU, we only
- * have to check the current processor.
- */
-
-static DEFINE_PER_CPU(unsigned, last_irq_sum);
-static DEFINE_PER_CPU(local_t, alert_counter);
-static DEFINE_PER_CPU(int, nmi_touch);
-
-void touch_nmi_watchdog(void)
-{
- if (nmi_watchdog > 0) {
- unsigned cpu;
-
- /*
- * Tell other CPUs to reset their alert counters. We cannot
- * do it ourselves because the alert count increase is not
- * atomic.
- */
- for_each_present_cpu(cpu) {
- if (per_cpu(nmi_touch, cpu) != 1)
- per_cpu(nmi_touch, cpu) = 1;
- }
- }
-
- touch_softlockup_watchdog();
-}
-EXPORT_SYMBOL(touch_nmi_watchdog);
-
-notrace __kprobes int
-nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
-{
- int sum;
- int touched = 0;
- int cpu = smp_processor_id();
- int rc = 0;
-
- /* check for other users first */
- if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT)
- == NOTIFY_STOP) {
- rc = 1;
- touched = 1;
- }
-
- sum = read_pda(apic_timer_irqs) + read_pda(irq0_irqs);
- if (__get_cpu_var(nmi_touch)) {
- __get_cpu_var(nmi_touch) = 0;
- touched = 1;
- }
-
- if (cpu_isset(cpu, backtrace_mask)) {
- static DEFINE_SPINLOCK(lock); /* Serialise the printks */
-
- spin_lock(&lock);
- printk("NMI backtrace for cpu %d\n", cpu);
- dump_stack();
- spin_unlock(&lock);
- cpu_clear(cpu, backtrace_mask);
- }
-
-#ifdef CONFIG_X86_MCE
- /* Could check oops_in_progress here too, but it's safer
- not too */
- if (atomic_read(&mce_entry) > 0)
- touched = 1;
-#endif
- /* if the apic timer isn't firing, this cpu isn't doing much */
- if (!touched && __get_cpu_var(last_irq_sum) == sum) {
- /*
- * Ayiee, looks like this CPU is stuck ...
- * wait a few IRQs (5 seconds) before doing the oops ...
- */
- local_inc(&__get_cpu_var(alert_counter));
- if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz)
- die_nmi("NMI Watchdog detected LOCKUP on CPU %d\n", regs,
- panic_on_timeout);
- } else {
- __get_cpu_var(last_irq_sum) = sum;
- local_set(&__get_cpu_var(alert_counter), 0);
- }
-
- /* see if the nmi watchdog went off */
- if (!__get_cpu_var(wd_enabled))
- return rc;
- switch (nmi_watchdog) {
- case NMI_LOCAL_APIC:
- rc |= lapic_wd_event(nmi_hz);
- break;
- case NMI_IO_APIC:
- /* don't know how to accurately check for this.
- * just assume it was a watchdog timer interrupt
- * This matches the old behaviour.
- */
- rc = 1;
- break;
- }
- return rc;
-}
-
-static unsigned ignore_nmis;
-
-asmlinkage notrace __kprobes void
-do_nmi(struct pt_regs *regs, long error_code)
-{
- nmi_enter();
- add_pda(__nmi_count,1);
- if (!ignore_nmis)
- default_do_nmi(regs);
- nmi_exit();
-}
-
-void stop_nmi(void)
-{
- acpi_nmi_disable();
- ignore_nmis++;
-}
-
-void restart_nmi(void)
-{
- ignore_nmis--;
- acpi_nmi_enable();
-}
-
-#ifdef CONFIG_SYSCTL
-
-static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
-{
- unsigned char reason = get_nmi_reason();
- char buf[64];
-
- sprintf(buf, "NMI received for unknown reason %02x\n", reason);
- die_nmi(buf, regs, 1); /* Always panic here */
- return 0;
-}
-
-/*
- * proc handler for /proc/sys/kernel/nmi
- */
-int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file,
- void __user *buffer, size_t *length, loff_t *ppos)
-{
- int old_state;
-
- nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0;
- old_state = nmi_watchdog_enabled;
- proc_dointvec(table, write, file, buffer, length, ppos);
- if (!!old_state == !!nmi_watchdog_enabled)
- return 0;
-
- if (atomic_read(&nmi_active) < 0 || nmi_watchdog == NMI_DISABLED) {
- printk( KERN_WARNING "NMI watchdog is permanently disabled\n");
- return -EIO;
- }
-
- /* if nmi_watchdog is not set yet, then set it */
- nmi_watchdog_default();
-
- if (nmi_watchdog == NMI_LOCAL_APIC) {
- if (nmi_watchdog_enabled)
- enable_lapic_nmi_watchdog();
- else
- disable_lapic_nmi_watchdog();
- } else {
- printk( KERN_WARNING
- "NMI watchdog doesn't know what hardware to touch\n");
- return -EIO;
- }
- return 0;
-}
-
-#endif
-
-int do_nmi_callback(struct pt_regs *regs, int cpu)
-{
-#ifdef CONFIG_SYSCTL
- if (unknown_nmi_panic)
- return unknown_nmi_panic_callback(regs, cpu);
-#endif
- return 0;
-}
-
-void __trigger_all_cpu_backtrace(void)
-{
- int i;
-
- backtrace_mask = cpu_online_map;
- /* Wait for up to 10 seconds for all CPUs to do the backtrace */
- for (i = 0; i < 10 * 1000; i++) {
- if (cpus_empty(backtrace_mask))
- break;
- mdelay(1);
- }
-}
-
-EXPORT_SYMBOL(nmi_active);
-EXPORT_SYMBOL(nmi_watchdog);
diff --git a/arch/x86/kernel/traps_32.c b/arch/x86/kernel/traps_32.c
index bde6f63..f31e665 100644
--- a/arch/x86/kernel/traps_32.c
+++ b/arch/x86/kernel/traps_32.c
@@ -755,9 +755,9 @@ unknown_nmi_error(unsigned char reason, struct pt_regs *regs)
static DEFINE_SPINLOCK(nmi_print_lock);
-void notrace __kprobes die_nmi(struct pt_regs *regs, const char *msg)
+void notrace __kprobes die_nmi(char *str, struct pt_regs *regs, int do_panic)
{
- if (notify_die(DIE_NMIWATCHDOG, msg, regs, 0, 2, SIGINT) == NOTIFY_STOP)
+ if (notify_die(DIE_NMIWATCHDOG, str, regs, 0, 2, SIGINT) == NOTIFY_STOP)
return;
spin_lock(&nmi_print_lock);
@@ -766,10 +766,12 @@ void notrace __kprobes die_nmi(struct pt_regs *regs, const char *msg)
* to get a message out:
*/
bust_spinlocks(1);
- printk(KERN_EMERG "%s", msg);
+ printk(KERN_EMERG "%s", str);
printk(" on CPU%d, ip %08lx, registers:\n",
smp_processor_id(), regs->ip);
show_registers(regs);
+ if (do_panic)
+ panic("Non maskable interrupt");
console_silent();
spin_unlock(&nmi_print_lock);
bust_spinlocks(0);
diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c
index adff76e..e4a3807 100644
--- a/arch/x86/kernel/traps_64.c
+++ b/arch/x86/kernel/traps_64.c
@@ -76,7 +76,9 @@ asmlinkage void alignment_check(void);
asmlinkage void machine_check(void);
asmlinkage void spurious_interrupt_bug(void);
+int panic_on_unrecovered_nmi;
static unsigned int code_bytes = 64;
+static unsigned ignore_nmis;
static inline void conditional_sti(struct pt_regs *regs)
{
@@ -614,7 +616,9 @@ die_nmi(char *str, struct pt_regs *regs, int do_panic)
* We are in trouble anyway, lets at least try
* to get a message out.
*/
- printk(str, smp_processor_id());
+ printk(KERN_EMERG "%s", str);
+ printk(" on CPU%d, ip %08lx, registers:\n",
+ smp_processor_id(), regs->ip);
show_registers(regs);
if (kexec_should_crash(current))
crash_kexec(regs);
@@ -865,6 +869,28 @@ asmlinkage notrace __kprobes void default_do_nmi(struct pt_regs *regs)
io_check_error(reason, regs);
}
+asmlinkage notrace __kprobes void
+do_nmi(struct pt_regs *regs, long error_code)
+{
+ nmi_enter();
+ add_pda(__nmi_count, 1);
+ if (!ignore_nmis)
+ default_do_nmi(regs);
+ nmi_exit();
+}
+
+void stop_nmi(void)
+{
+ acpi_nmi_disable();
+ ignore_nmis++;
+}
+
+void restart_nmi(void)
+{
+ ignore_nmis--;
+ acpi_nmi_enable();
+}
+
/* runs on IST stack. */
asmlinkage void __kprobes do_int3(struct pt_regs * regs, long error_code)
{
diff --git a/include/asm-x86/nmi.h b/include/asm-x86/nmi.h
index 1e36302..2c5c4be 100644
--- a/include/asm-x86/nmi.h
+++ b/include/asm-x86/nmi.h
@@ -38,12 +38,10 @@ static inline void unset_nmi_pm_callback(struct pm_dev *dev)
#ifdef CONFIG_X86_64
extern void default_do_nmi(struct pt_regs *);
-extern void die_nmi(char *str, struct pt_regs *regs, int do_panic);
-extern void nmi_watchdog_default(void);
-#else
-#define nmi_watchdog_default() do {} while (0)
#endif
+extern void nmi_watchdog_default(void);
+extern void die_nmi(char *str, struct pt_regs *regs, int do_panic);
extern int check_nmi_watchdog(void);
extern int nmi_watchdog_enabled;
extern int unknown_nmi_panic;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists