[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <s5hd4md91tq.wl%tiwai@suse.de>
Date: Thu, 19 Jun 2008 12:05:53 +0200
From: Takashi Iwai <tiwai@...e.de>
To: Rene Herman <rene.herman@...access.nl>
Cc: Pierre Ossman <drzeus@...eus.cx>,
ALSA devel <alsa-devel@...a-project.org>,
linux-kernel@...r.kernel.org, mulix@...ix.org
Subject: Re: [alsa-devel] looping S/PDIF data
At Wed, 18 Jun 2008 09:24:59 +0200,
Rene Herman wrote:
>
> On 17-06-08 21:55, Pierre Ossman wrote:
>
> > Ping
> >
> > On Sat, 31 May 2008 11:26:06 +0200
> > Pierre Ossman <drzeus-list@...eus.cx> wrote:
> >
> >> I have a minor annoyance with the snd_trident driver that I was hoping
> >> you might have a fix for:
> >>
> >> Pausing the output does not seem to take on the S/PDIF output. Analog
> >> outputs properly stop in their tracks, but the S/PDIF port keeps
> >> looping the current data buffer, which gives a rather unpleasant end
> >> result. :)
>
> Try the alsa-devel list...
Does the patch below help?
Takashi
diff --git a/sound/pci/trident/trident_main.c b/sound/pci/trident/trident_main.c
index bbcee2c..916d4b8 100644
--- a/sound/pci/trident/trident_main.c
+++ b/sound/pci/trident/trident_main.c
@@ -1593,7 +1593,11 @@ static int snd_trident_trigger(struct snd_pcm_substream *substream,
outb(trident->spdif_pcm_ctrl, TRID_REG(trident, NX_SPCTRL_SPCSO + 3));
} else {
outl(trident->spdif_pcm_bits, TRID_REG(trident, SI_SPDIF_CS));
- val = inl(TRID_REG(trident, SI_SERIAL_INTF_CTRL)) | SPDIF_EN;
+ val = inl(TRID_REG(trident, SI_SERIAL_INTF_CTRL));
+ if (go)
+ val |= SPDIF_EN;
+ else
+ val &= ~SPDIF_EN;
outl(val, TRID_REG(trident, SI_SERIAL_INTF_CTRL));
}
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists