| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200807152232.52354.bzolnier@gmail.com>
Date: Tue, 15 Jul 2008 22:32:51 +0200
From: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: Andrew Morton <akpm@...ux-foundation.org>,
Stephen Rothwell <sfr@...b.auug.org.au>,
linux-ide@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [git pull] IDE updates [part 1]
Hi,
A lot of stuff got queued for 2.6.27, for a start:
* Removal of the on-stack struct request instances + conversion of
IDE code to use blk_execute_rq() from FUJITA Tomonori.
[ There also few small block patches included as they depend on
the above IDE changes - this was acked by Jens. ]
* ide_driveid_update() bugfix to correctly mask drive's interrupts
from Mikhail Cherkashin.
* ATAPI support unification (generic code resides now in ide-atapi.c
and ide-{floppy,tape,scsi} device drivers were converted to use it),
in the process many bugs were shaken out and 300 LOC is gone.
* Code sanitization fixes from Borislav Petkov and Harvey Harrison.
* Removal of obsoleted old-style kernel parameters (another 300 LOC gone).
* Misc fixes/cleanups.
Linus, please pull from:
master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6.git/
to receive the following updates:
Documentation/kernel-parameters.txt | 3 -
block/blk-core.c | 12 +-
block/blk-exec.c | 6 +-
drivers/block/paride/pd.c | 20 +-
drivers/ide/Kconfig | 6 +
drivers/ide/Makefile | 1 +
drivers/ide/arm/palm_bk3710.c | 3 +-
drivers/ide/h8300/ide-h8300.c | 6 +-
drivers/ide/ide-acpi.c | 6 +-
drivers/ide/ide-atapi.c | 296 ++++++++++++++++++
drivers/ide/ide-cd.c | 122 ++++----
drivers/ide/ide-cd.h | 4 +-
drivers/ide/ide-cd_ioctl.c | 113 ++++----
drivers/ide/ide-disk.c | 13 +-
drivers/ide/ide-dma.c | 4 +-
drivers/ide/ide-floppy.c | 357 +++++------------------
drivers/ide/ide-io.c | 114 ++------
drivers/ide/ide-iops.c | 38 +--
drivers/ide/ide-probe.c | 10 +-
drivers/ide/ide-tape.c | 561 ++++++++++-------------------------
drivers/ide/ide-taskfile.c | 38 ++-
drivers/ide/ide-timing.h | 1 -
drivers/ide/ide.c | 360 ++---------------------
drivers/ide/legacy/ali14xx.c | 2 +-
drivers/ide/legacy/gayle.c | 4 +-
drivers/ide/legacy/ht6560b.c | 2 +-
drivers/ide/legacy/qd65xx.c | 4 +-
drivers/ide/pci/aec62xx.c | 2 +-
drivers/ide/pci/alim15x3.c | 2 +-
drivers/ide/pci/amd74xx.c | 16 +-
drivers/ide/pci/cmd640.c | 8 +-
drivers/ide/pci/cmd64x.c | 4 +-
drivers/ide/pci/cy82c693.c | 2 +-
drivers/ide/pci/hpt366.c | 3 +-
drivers/ide/pci/ns87415.c | 4 +-
drivers/ide/pci/scc_pata.c | 12 +-
drivers/ide/pci/sgiioc4.c | 7 +-
drivers/ide/pci/siimage.c | 25 +-
drivers/ide/pci/via82cxxx.c | 16 +-
drivers/ide/ppc/pmac.c | 6 +-
drivers/ide/setup-pci.c | 4 +-
drivers/scsi/ide-scsi.c | 302 +++++--------------
include/linux/blkdev.h | 1 -
include/linux/ide.h | 55 ++--
44 files changed, 927 insertions(+), 1648 deletions(-)
create mode 100644 drivers/ide/ide-atapi.c
Bartlomiej Zolnierkiewicz (57):
ide: set REQ_PREEMPT request flag in ide_do_drive_cmd() users
ide: use __generic_unplug_device() in ide_do_drive_cmd() (take 2)
block: handle blk_pm_resume_request() requests in blk_execute_rq_nowait()
ide: remove obsoleted "idebus=" kernel parameter
ide: remove obsoleted "hdx=" kernel parameters
ide: cleanup init_ide_data()
ide: remove obsoleted "ide=" kernel parameters
ide: remove try_to_flush_leftover_data()
sgiioc4: use ->extra_base instead of ->dma_status for dma_handle
ide: remove commented out code from ide_config_drive_speed()
ide: fix do_probe() to use SELECT_DRIVE()
ide: remove IDE_TFLAG_NO_SELECT_MASK taskfile flag
ide: move IRQ unmasking out from ->tf_load method
ide: remove ->mmio flag from ide_hwif_t
ide: pass 'hwif *' instead of 'drive *' to ->OUTBSYNC method
ide: use ->OUTBSYNC in init_irq()
ide: use ->OUTBSYNC in ide_set_irq()
ide: remove drive->ctl
ide-scsi: fix race in idescsi_transfer_pc()
ide-scsi: fix DRQ checking for DMA transfers in idescsi_pc_intr()
ide-scsi: fix handling of DMA errors in idescsi_pc_intr()
ide-scsi: fix Interrupt Reason checking in idescsi_pc_intr()
ide-scsi: merge idescsi_input_buffers() and idescsi_output_buffers()
ide-scsi: remove superfluous BUG_ON() from idescsi_transfer_pc()
ide-scsi: add debug_log() macro
ide-tape: idetape_pc_intr() should use local_irq_enable_in_hardirq()
ide-tape: remove superfluous error message from idetape_pc_intr()
ide-tape: remove superfluous warning message from idetape_issue_pc()
ide-tape: remove unneeded CONFIG_BLK_DEV_IDEDMA ifdef
ide-tape: remove stale comments from idetape_pc_intr()
ide-tape: remove SIMULATE_ERRORS debug code
ide-floppy: merge idefloppy_transfer_pc() and idefloppy_transfer_pc1()
ide-{floppy,tape,scsi}: log device name instead of driver name
ide-tape: make idetape_retry_pc() void
ide-tape: merge callbacks
ide-tape: make pc->idetape_callback void
ide-{floppy,tape}: merge pc->idefloppy_callback and pc->idetape_callback
ide-{floppy,tape}: PC_FLAG_DMA_RECOMMENDED -> PC_FLAG_DMA_OK
ide-floppy: start DMA engine in idefloppy_transfer_pc1()
ide-tape: set PC_FLAG_DMA_IN_PROGRESS flag in idetape_transfer_pc()
ide-tape: factor out waiting for good ireason from idetape_transfer_pc()
ide: add PC_FLAG_ZIP_DRIVE pc flag
ide-{cd,floppy,tape}: remove checking for drive->scsi
ide-scsi: set drive->scsi flag for devices handled by the driver
ide: add ide_transfer_pc() helper
ide-scsi: move idescsi_map_sg() call out from idescsi_issue_pc()
ide: add PC_FLAG_DRQ_INTERRUPT pc flag
ide: add ide_issue_pc() helper
ide-{floppy,tape}: move checking of ->failed_pc to ->callback
ide-tape: factor out DSC handling from idetape_pc_intr()
ide-tape: add ide_tape_io_buffers() helper
ide-tape: always log debug info in idetape_pc_intr() if debugging is enabled
ide-floppy: add more debugging to idefloppy_pc_intr()
ide-scsi: use pc->callback
ide-scsi: add more debugging to idescsi_pc_intr()
ide-{floppy,scsi}: read Status Register before stopping DMA engine
ide: add ide_pc_intr() helper
Borislav Petkov (3):
ide-floppy: merge callbacks
ide-tape: unify idetape_create_read/write_cmd
ide-floppy: fix unfortunate function naming
FUJITA Tomonori (15):
ide-cd: convert ide_cd_queue_pc to use blk_execute_rq
ide-cd: convert ide_do_drive_cmd path to use blk_execute_rq
ide-disk: convert ide_do_drive_cmd path to use blk_execute_rq
ide-floppy: convert ide_do_drive_cmd path to use blk_execute_rq
ide-taskfile: convert ide_do_drive_cmd path to use blk_execute_rq
ide-tape: convert ide_do_drive_cmd path to use blk_execute_rq
ide: convert ide_do_drive_cmd path to use blk_execute_rq
ide: remove ide_wait/head_wait path in ide_do_drive_cmd
ide: remove ide_init_drive_cmd
ide-cd: remove ide_cd_init_rq
block: convert pd_special_command to use blk_execute_rq
block: remove the checking for NULL queue in blk_put_request
block: unexport blk_end_sync_rq
ide-scsi: replace ide_do_drive_cmd with blk_execute_rq_nowait
ide: remove action argument in ide_do_drive_cmd
Harvey Harrison (3):
ide: eliminate FIT() macro
ide-tape: use clamp_t() rather than nested min_t()/max_t()
ide: use get_unaligned_* helpers
Mikhail Cherkashin (2):
palm_bk3710: fix tRP for UDMA mode 4
ide: disable drive interrupts in ide_driveid_update()
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index b52f47d..faeea50 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -722,9 +722,6 @@ and is between 256 and 4096 characters. It is defined in the file
hd= [EIDE] (E)IDE hard drive subsystem geometry
Format: <cyl>,<head>,<sect>
- hd?= [HW] (E)IDE subsystem
- hd?lun= See Documentation/ide/ide.txt.
-
highmem=nn[KMG] [KNL,BOOT] forces the highmem zone to have an exact
size of <nn>. This works even on boxes that have no
highmem otherwise. This also works to reduce highmem
diff --git a/block/blk-core.c b/block/blk-core.c
index 1905aab..ac83cf9 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1042,15 +1042,9 @@ void blk_put_request(struct request *req)
unsigned long flags;
struct request_queue *q = req->q;
- /*
- * Gee, IDE calls in w/ NULL q. Fix IDE and remove the
- * following if (q) test.
- */
- if (q) {
- spin_lock_irqsave(q->queue_lock, flags);
- __blk_put_request(q, req);
- spin_unlock_irqrestore(q->queue_lock, flags);
- }
+ spin_lock_irqsave(q->queue_lock, flags);
+ __blk_put_request(q, req);
+ spin_unlock_irqrestore(q->queue_lock, flags);
}
EXPORT_SYMBOL(blk_put_request);
diff --git a/block/blk-exec.c b/block/blk-exec.c
index 391dd62..9bceff7 100644
--- a/block/blk-exec.c
+++ b/block/blk-exec.c
@@ -18,7 +18,7 @@
* @rq: request to complete
* @error: end io status of the request
*/
-void blk_end_sync_rq(struct request *rq, int error)
+static void blk_end_sync_rq(struct request *rq, int error)
{
struct completion *waiting = rq->end_io_data;
@@ -31,7 +31,6 @@ void blk_end_sync_rq(struct request *rq, int error)
*/
complete(waiting);
}
-EXPORT_SYMBOL(blk_end_sync_rq);
/**
* blk_execute_rq_nowait - insert a request into queue for execution
@@ -58,6 +57,9 @@ void blk_execute_rq_nowait(struct request_queue *q, struct gendisk *bd_disk,
spin_lock_irq(q->queue_lock);
__elv_add_request(q, rq, where, 1);
__generic_unplug_device(q);
+ /* the queue is stopped so it won't be plugged+unplugged */
+ if (blk_pm_resume_request(rq))
+ q->request_fn(q);
spin_unlock_irq(q->queue_lock);
}
EXPORT_SYMBOL_GPL(blk_execute_rq_nowait);
diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c
index 570f3b7..5fdfa7c 100644
--- a/drivers/block/paride/pd.c
+++ b/drivers/block/paride/pd.c
@@ -712,19 +712,17 @@ static void do_pd_request(struct request_queue * q)
static int pd_special_command(struct pd_unit *disk,
enum action (*func)(struct pd_unit *disk))
{
- DECLARE_COMPLETION_ONSTACK(wait);
- struct request rq;
+ struct request *rq;
int err = 0;
- blk_rq_init(NULL, &rq);
- rq.rq_disk = disk->gd;
- rq.end_io_data = &wait;
- rq.end_io = blk_end_sync_rq;
- blk_insert_request(disk->gd->queue, &rq, 0, func);
- wait_for_completion(&wait);
- if (rq.errors)
- err = -EIO;
- blk_put_request(&rq);
+ rq = blk_get_request(disk->gd->queue, READ, __GFP_WAIT);
+
+ rq->cmd_type = REQ_TYPE_SPECIAL;
+ rq->special = func;
+
+ err = blk_execute_rq(disk->gd->queue, disk->gd, rq, 0);
+
+ blk_put_request(rq);
return err;
}
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 1607536..cf707c8 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -98,6 +98,9 @@ if BLK_DEV_IDE
comment "Please see Documentation/ide/ide.txt for help/info on IDE drives"
+config IDE_ATAPI
+ bool
+
config BLK_DEV_IDE_SATA
bool "Support for SATA (deprecated; conflicts with libata SATA driver)"
default n
@@ -201,6 +204,7 @@ config BLK_DEV_IDECD_VERBOSE_ERRORS
config BLK_DEV_IDETAPE
tristate "Include IDE/ATAPI TAPE support"
+ select IDE_ATAPI
help
If you have an IDE tape drive using the ATAPI protocol, say Y.
ATAPI is a newer protocol used by IDE tape and CD-ROM drives,
@@ -223,6 +227,7 @@ config BLK_DEV_IDETAPE
config BLK_DEV_IDEFLOPPY
tristate "Include IDE/ATAPI FLOPPY support"
+ select IDE_ATAPI
---help---
If you have an IDE floppy drive which uses the ATAPI protocol,
answer Y. ATAPI is a newer protocol used by IDE CD-ROM/tape/floppy
@@ -246,6 +251,7 @@ config BLK_DEV_IDEFLOPPY
config BLK_DEV_IDESCSI
tristate "SCSI emulation support"
depends on SCSI
+ select IDE_ATAPI
---help---
WARNING: ide-scsi is no longer needed for cd writing applications!
The 2.6 kernel supports direct writing to ide-cd, which eliminates
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index f94b679..a2b3f84 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -14,6 +14,7 @@ EXTRA_CFLAGS += -Idrivers/ide
ide-core-y += ide.o ide-io.o ide-iops.o ide-lib.o ide-probe.o ide-taskfile.o
# core IDE code
+ide-core-$(CONFIG_IDE_ATAPI) += ide-atapi.o
ide-core-$(CONFIG_BLK_DEV_IDEPCI) += setup-pci.o
ide-core-$(CONFIG_BLK_DEV_IDEDMA) += ide-dma.o
ide-core-$(CONFIG_IDE_PROC_FS) += ide-proc.o
diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c
index 2f2b4f4..3839f57 100644
--- a/drivers/ide/arm/palm_bk3710.c
+++ b/drivers/ide/arm/palm_bk3710.c
@@ -83,7 +83,7 @@ static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = {
{125, 160}, /* UDMA Mode 1 */
{100, 120}, /* UDMA Mode 2 */
{100, 90}, /* UDMA Mode 3 */
- {85, 60}, /* UDMA Mode 4 */
+ {100, 60}, /* UDMA Mode 4 */
};
static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev,
@@ -405,7 +405,6 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev)
ide_init_port_data(hwif, i);
ide_init_port_hw(hwif, &hw);
- hwif->mmio = 1;
default_hwif_mmiops(hwif);
idx[0] = i;
diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c
index ecf53bb..ae37ee5 100644
--- a/drivers/ide/h8300/ide-h8300.c
+++ b/drivers/ide/h8300/ide-h8300.c
@@ -52,8 +52,6 @@ static void h8300_tf_load(ide_drive_t *drive, ide_task_t *task)
if (task->tf_flags & IDE_TFLAG_FLAGGED)
HIHI = 0xFF;
- ide_set_irq(drive, 1);
-
if (task->tf_flags & IDE_TFLAG_OUT_DATA)
mm_outw((tf->hob_data << 8) | tf->data, io_ports->data_addr);
@@ -98,7 +96,7 @@ static void h8300_tf_read(ide_drive_t *drive, ide_task_t *task)
}
/* be sure we're looking at the low order bits */
- outb(drive->ctl & ~0x80, io_ports->ctl_addr);
+ outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr);
if (task->tf_flags & IDE_TFLAG_IN_NSECT)
tf->nsect = inb(io_ports->nsect_addr);
@@ -112,7 +110,7 @@ static void h8300_tf_read(ide_drive_t *drive, ide_task_t *task)
tf->device = inb(io_ports->device_addr);
if (task->tf_flags & IDE_TFLAG_LBA48) {
- outb(drive->ctl | 0x80, io_ports->ctl_addr);
+ outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr);
if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
tf->hob_feature = inb(io_ports->feature_addr);
diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c
index 9d3601f..6f70462 100644
--- a/drivers/ide/ide-acpi.c
+++ b/drivers/ide/ide-acpi.c
@@ -60,15 +60,15 @@ struct ide_acpi_hwif_link {
#define DEBPRINT(fmt, args...) do {} while (0)
#endif /* DEBUGGING */
-int ide_noacpi;
+static int ide_noacpi;
module_param_named(noacpi, ide_noacpi, bool, 0);
MODULE_PARM_DESC(noacpi, "disable IDE ACPI support");
-int ide_acpigtf;
+static int ide_acpigtf;
module_param_named(acpigtf, ide_acpigtf, bool, 0);
MODULE_PARM_DESC(acpigtf, "enable IDE ACPI _GTF support");
-int ide_acpionboot;
+static int ide_acpionboot;
module_param_named(acpionboot, ide_acpionboot, bool, 0);
MODULE_PARM_DESC(acpionboot, "call IDE ACPI methods on boot");
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
new file mode 100644
index 0000000..2802031
--- /dev/null
+++ b/drivers/ide/ide-atapi.c
@@ -0,0 +1,296 @@
+/*
+ * ATAPI support.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <scsi/scsi.h>
+
+#ifdef DEBUG
+#define debug_log(fmt, args...) \
+ printk(KERN_INFO "ide: " fmt, ## args)
+#else
+#define debug_log(fmt, args...) do {} while (0)
+#endif
+
+/* TODO: unify the code thus making some arguments go away */
+ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
+ ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry,
+ void (*update_buffers)(ide_drive_t *, struct ide_atapi_pc *),
+ void (*retry_pc)(ide_drive_t *), void (*dsc_handle)(ide_drive_t *),
+ void (*io_buffers)(ide_drive_t *, struct ide_atapi_pc *, unsigned, int))
+{
+ ide_hwif_t *hwif = drive->hwif;
+ xfer_func_t *xferfunc;
+ unsigned int temp;
+ u16 bcount;
+ u8 stat, ireason, scsi = drive->scsi;
+
+ debug_log("Enter %s - interrupt handler\n", __func__);
+
+ if (pc->flags & PC_FLAG_TIMEDOUT) {
+ pc->callback(drive);
+ return ide_stopped;
+ }
+
+ /* Clear the interrupt */
+ stat = ide_read_status(drive);
+
+ if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
+ if (hwif->dma_ops->dma_end(drive) ||
+ (drive->media == ide_tape && !scsi && (stat & ERR_STAT))) {
+ if (drive->media == ide_floppy && !scsi)
+ printk(KERN_ERR "%s: DMA %s error\n",
+ drive->name, rq_data_dir(pc->rq)
+ ? "write" : "read");
+ pc->flags |= PC_FLAG_DMA_ERROR;
+ } else {
+ pc->xferred = pc->req_xfer;
+ if (update_buffers)
+ update_buffers(drive, pc);
+ }
+ debug_log("%s: DMA finished\n", drive->name);
+ }
+
+ /* No more interrupts */
+ if ((stat & DRQ_STAT) == 0) {
+ debug_log("Packet command completed, %d bytes transferred\n",
+ pc->xferred);
+
+ pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
+
+ local_irq_enable_in_hardirq();
+
+ if (drive->media == ide_tape && !scsi &&
+ (stat & ERR_STAT) && pc->c[0] == REQUEST_SENSE)
+ stat &= ~ERR_STAT;
+ if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) {
+ /* Error detected */
+ debug_log("%s: I/O error\n", drive->name);
+
+ if (drive->media != ide_tape || scsi) {
+ pc->rq->errors++;
+ if (scsi)
+ goto cmd_finished;
+ }
+
+ if (pc->c[0] == REQUEST_SENSE) {
+ printk(KERN_ERR "%s: I/O error in request sense"
+ " command\n", drive->name);
+ return ide_do_reset(drive);
+ }
+
+ debug_log("[cmd %x]: check condition\n", pc->c[0]);
+
+ /* Retry operation */
+ retry_pc(drive);
+ /* queued, but not started */
+ return ide_stopped;
+ }
+cmd_finished:
+ pc->error = 0;
+ if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) &&
+ (stat & SEEK_STAT) == 0) {
+ dsc_handle(drive);
+ return ide_stopped;
+ }
+ /* Command finished - Call the callback function */
+ pc->callback(drive);
+ return ide_stopped;
+ }
+
+ if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
+ pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
+ printk(KERN_ERR "%s: The device wants to issue more interrupts "
+ "in DMA mode\n", drive->name);
+ ide_dma_off(drive);
+ return ide_do_reset(drive);
+ }
+ /* Get the number of bytes to transfer on this interrupt. */
+ bcount = (hwif->INB(hwif->io_ports.lbah_addr) << 8) |
+ hwif->INB(hwif->io_ports.lbam_addr);
+
+ ireason = hwif->INB(hwif->io_ports.nsect_addr);
+
+ if (ireason & CD) {
+ printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__);
+ return ide_do_reset(drive);
+ }
+ if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) {
+ /* Hopefully, we will never get here */
+ printk(KERN_ERR "%s: We wanted to %s, but the device wants us "
+ "to %s!\n", drive->name,
+ (ireason & IO) ? "Write" : "Read",
+ (ireason & IO) ? "Read" : "Write");
+ return ide_do_reset(drive);
+ }
+ if (!(pc->flags & PC_FLAG_WRITING)) {
+ /* Reading - Check that we have enough space */
+ temp = pc->xferred + bcount;
+ if (temp > pc->req_xfer) {
+ if (temp > pc->buf_size) {
+ printk(KERN_ERR "%s: The device wants to send "
+ "us more data than expected - "
+ "discarding data\n",
+ drive->name);
+ if (scsi)
+ temp = pc->buf_size - pc->xferred;
+ else
+ temp = 0;
+ if (temp) {
+ if (pc->sg)
+ io_buffers(drive, pc, temp, 0);
+ else
+ hwif->input_data(drive, NULL,
+ pc->cur_pos, temp);
+ printk(KERN_ERR "%s: transferred %d of "
+ "%d bytes\n",
+ drive->name,
+ temp, bcount);
+ }
+ pc->xferred += temp;
+ pc->cur_pos += temp;
+ ide_pad_transfer(drive, 0, bcount - temp);
+ ide_set_handler(drive, handler, timeout,
+ expiry);
+ return ide_started;
+ }
+ debug_log("The device wants to send us more data than "
+ "expected - allowing transfer\n");
+ }
+ xferfunc = hwif->input_data;
+ } else
+ xferfunc = hwif->output_data;
+
+ if ((drive->media == ide_floppy && !scsi && !pc->buf) ||
+ (drive->media == ide_tape && !scsi && pc->bh) ||
+ (scsi && pc->sg))
+ io_buffers(drive, pc, bcount, !!(pc->flags & PC_FLAG_WRITING));
+ else
+ xferfunc(drive, NULL, pc->cur_pos, bcount);
+
+ /* Update the current position */
+ pc->xferred += bcount;
+ pc->cur_pos += bcount;
+
+ debug_log("[cmd %x] transferred %d bytes on that intr.\n",
+ pc->c[0], bcount);
+
+ /* And set the interrupt handler again */
+ ide_set_handler(drive, handler, timeout, expiry);
+ return ide_started;
+}
+EXPORT_SYMBOL_GPL(ide_pc_intr);
+
+static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ int retries = 100;
+
+ while (retries-- && ((ireason & CD) == 0 || (ireason & IO))) {
+ printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing "
+ "a packet command, retrying\n", drive->name);
+ udelay(100);
+ ireason = hwif->INB(hwif->io_ports.nsect_addr);
+ if (retries == 0) {
+ printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing "
+ "a packet command, ignoring\n",
+ drive->name);
+ ireason |= CD;
+ ireason &= ~IO;
+ }
+ }
+
+ return ireason;
+}
+
+ide_startstop_t ide_transfer_pc(ide_drive_t *drive, struct ide_atapi_pc *pc,
+ ide_handler_t *handler, unsigned int timeout,
+ ide_expiry_t *expiry)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ ide_startstop_t startstop;
+ u8 ireason;
+
+ if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
+ printk(KERN_ERR "%s: Strange, packet command initiated yet "
+ "DRQ isn't asserted\n", drive->name);
+ return startstop;
+ }
+
+ ireason = hwif->INB(hwif->io_ports.nsect_addr);
+ if (drive->media == ide_tape && !drive->scsi)
+ ireason = ide_wait_ireason(drive, ireason);
+
+ if ((ireason & CD) == 0 || (ireason & IO)) {
+ printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing "
+ "a packet command\n", drive->name);
+ return ide_do_reset(drive);
+ }
+
+ /* Set the interrupt routine */
+ ide_set_handler(drive, handler, timeout, expiry);
+
+ /* Begin DMA, if necessary */
+ if (pc->flags & PC_FLAG_DMA_OK) {
+ pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
+ hwif->dma_ops->dma_start(drive);
+ }
+
+ /* Send the actual packet */
+ if ((pc->flags & PC_FLAG_ZIP_DRIVE) == 0)
+ hwif->output_data(drive, NULL, pc->c, 12);
+
+ return ide_started;
+}
+EXPORT_SYMBOL_GPL(ide_transfer_pc);
+
+ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_atapi_pc *pc,
+ ide_handler_t *handler, unsigned int timeout,
+ ide_expiry_t *expiry)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ u16 bcount;
+ u8 dma = 0;
+
+ /* We haven't transferred any data yet */
+ pc->xferred = 0;
+ pc->cur_pos = pc->buf;
+
+ /* Request to transfer the entire buffer at once */
+ if (drive->media == ide_tape && !drive->scsi)
+ bcount = pc->req_xfer;
+ else
+ bcount = min(pc->req_xfer, 63 * 1024);
+
+ if (pc->flags & PC_FLAG_DMA_ERROR) {
+ pc->flags &= ~PC_FLAG_DMA_ERROR;
+ ide_dma_off(drive);
+ }
+
+ if ((pc->flags & PC_FLAG_DMA_OK) && drive->using_dma) {
+ if (drive->scsi)
+ hwif->sg_mapped = 1;
+ dma = !hwif->dma_ops->dma_setup(drive);
+ if (drive->scsi)
+ hwif->sg_mapped = 0;
+ }
+
+ if (!dma)
+ pc->flags &= ~PC_FLAG_DMA_OK;
+
+ ide_pktcmd_tf_load(drive, drive->scsi ? 0 : IDE_TFLAG_OUT_DEVICE,
+ bcount, dma);
+
+ /* Issue the packet command */
+ if (pc->flags & PC_FLAG_DRQ_INTERRUPT) {
+ ide_execute_command(drive, WIN_PACKETCMD, handler,
+ timeout, NULL);
+ return ide_started;
+ } else {
+ ide_execute_pkt_cmd(drive);
+ return (*handler)(drive);
+ }
+}
+EXPORT_SYMBOL_GPL(ide_issue_pc);
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 68e7f19..d998471 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -188,16 +188,6 @@ static void cdrom_analyze_sense_data(ide_drive_t *drive,
ide_cd_log_error(drive->name, failed_command, sense);
}
-/* Initialize a ide-cd packet command request */
-void ide_cd_init_rq(ide_drive_t *drive, struct request *rq)
-{
- struct cdrom_info *cd = drive->driver_data;
-
- ide_init_drive_cmd(rq);
- rq->cmd_type = REQ_TYPE_ATA_PC;
- rq->rq_disk = cd->disk;
-}
-
static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense,
struct request *failed_command)
{
@@ -208,7 +198,9 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense,
sense = &info->sense_data;
/* stuff the sense request in front of our current request */
- ide_cd_init_rq(drive, rq);
+ blk_rq_init(NULL, rq);
+ rq->cmd_type = REQ_TYPE_ATA_PC;
+ rq->rq_disk = info->disk;
rq->data = sense;
rq->cmd[0] = GPCMD_REQUEST_SENSE;
@@ -216,11 +208,12 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense,
rq->data_len = 18;
rq->cmd_type = REQ_TYPE_SENSE;
+ rq->cmd_flags |= REQ_PREEMPT;
/* NOTE! Save the failed command in "rq->buffer" */
rq->buffer = (void *) failed_command;
- (void) ide_do_drive_cmd(drive, rq, ide_preempt);
+ ide_do_drive_cmd(drive, rq);
}
static void cdrom_end_request(ide_drive_t *drive, int uptodate)
@@ -537,8 +530,8 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
info->dma = !hwif->dma_ops->dma_setup(drive);
/* set up the controller registers */
- ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL |
- IDE_TFLAG_NO_SELECT_MASK, xferlen, info->dma);
+ ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL,
+ xferlen, info->dma);
if (info->cd_flags & IDE_CD_FLAG_DRQ_INTERRUPT) {
/* waiting for CDB interrupt, not DMA yet. */
@@ -838,34 +831,54 @@ static void ide_cd_request_sense_fixup(struct request *rq)
}
}
-int ide_cd_queue_pc(ide_drive_t *drive, struct request *rq)
+int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd,
+ int write, void *buffer, unsigned *bufflen,
+ struct request_sense *sense, int timeout,
+ unsigned int cmd_flags)
{
- struct request_sense sense;
+ struct cdrom_info *info = drive->driver_data;
+ struct request_sense local_sense;
int retries = 10;
- unsigned int flags = rq->cmd_flags;
+ unsigned int flags = 0;
- if (rq->sense == NULL)
- rq->sense = &sense;
+ if (!sense)
+ sense = &local_sense;
/* start of retry loop */
do {
+ struct request *rq;
int error;
- unsigned long time = jiffies;
- rq->cmd_flags = flags;
- error = ide_do_drive_cmd(drive, rq, ide_wait);
- time = jiffies - time;
+ rq = blk_get_request(drive->queue, write, __GFP_WAIT);
+
+ memcpy(rq->cmd, cmd, BLK_MAX_CDB);
+ rq->cmd_type = REQ_TYPE_ATA_PC;
+ rq->sense = sense;
+ rq->cmd_flags |= cmd_flags;
+ rq->timeout = timeout;
+ if (buffer) {
+ rq->data = buffer;
+ rq->data_len = *bufflen;
+ }
+
+ error = blk_execute_rq(drive->queue, info->disk, rq, 0);
+
+ if (buffer)
+ *bufflen = rq->data_len;
+
+ flags = rq->cmd_flags;
+ blk_put_request(rq);
/*
* FIXME: we should probably abort/retry or something in case of
* failure.
*/
- if (rq->cmd_flags & REQ_FAILED) {
+ if (flags & REQ_FAILED) {
/*
* The request failed. Retry if it was due to a unit
* attention status (usually means media was changed).
*/
- struct request_sense *reqbuf = rq->sense;
+ struct request_sense *reqbuf = sense;
if (reqbuf->sense_key == UNIT_ATTENTION)
cdrom_saw_media_change(drive);
@@ -885,10 +898,10 @@ int ide_cd_queue_pc(ide_drive_t *drive, struct request *rq)
}
/* end of retry loop */
- } while ((rq->cmd_flags & REQ_FAILED) && retries >= 0);
+ } while ((flags & REQ_FAILED) && retries >= 0);
/* return an error if the command failed */
- return (rq->cmd_flags & REQ_FAILED) ? -EIO : 0;
+ return (flags & REQ_FAILED) ? -EIO : 0;
}
/*
@@ -1268,23 +1281,20 @@ static void msf_from_bcd(struct atapi_msf *msf)
int cdrom_check_status(ide_drive_t *drive, struct request_sense *sense)
{
- struct request req;
struct cdrom_info *info = drive->driver_data;
struct cdrom_device_info *cdi = &info->devinfo;
+ unsigned char cmd[BLK_MAX_CDB];
- ide_cd_init_rq(drive, &req);
-
- req.sense = sense;
- req.cmd[0] = GPCMD_TEST_UNIT_READY;
- req.cmd_flags |= REQ_QUIET;
+ memset(cmd, 0, BLK_MAX_CDB);
+ cmd[0] = GPCMD_TEST_UNIT_READY;
/*
* Sanyo 3 CD changer uses byte 7 of TEST_UNIT_READY to switch CDs
* instead of supporting the LOAD_UNLOAD opcode.
*/
- req.cmd[7] = cdi->sanyo_slot % 3;
+ cmd[7] = cdi->sanyo_slot % 3;
- return ide_cd_queue_pc(drive, &req);
+ return ide_cd_queue_pc(drive, cmd, 0, NULL, 0, sense, 0, REQ_QUIET);
}
static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity,
@@ -1297,17 +1307,14 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity,
} capbuf;
int stat;
- struct request req;
-
- ide_cd_init_rq(drive, &req);
+ unsigned char cmd[BLK_MAX_CDB];
+ unsigned len = sizeof(capbuf);
- req.sense = sense;
- req.cmd[0] = GPCMD_READ_CDVD_CAPACITY;
- req.data = (char *)&capbuf;
- req.data_len = sizeof(capbuf);
- req.cmd_flags |= REQ_QUIET;
+ memset(cmd, 0, BLK_MAX_CDB);
+ cmd[0] = GPCMD_READ_CDVD_CAPACITY;
- stat = ide_cd_queue_pc(drive, &req);
+ stat = ide_cd_queue_pc(drive, cmd, 0, &capbuf, &len, sense, 0,
+ REQ_QUIET);
if (stat == 0) {
*capacity = 1 + be32_to_cpu(capbuf.lba);
*sectors_per_frame =
@@ -1321,24 +1328,20 @@ static int cdrom_read_tocentry(ide_drive_t *drive, int trackno, int msf_flag,
int format, char *buf, int buflen,
struct request_sense *sense)
{
- struct request req;
+ unsigned char cmd[BLK_MAX_CDB];
- ide_cd_init_rq(drive, &req);
+ memset(cmd, 0, BLK_MAX_CDB);
- req.sense = sense;
- req.data = buf;
- req.data_len = buflen;
- req.cmd_flags |= REQ_QUIET;
- req.cmd[0] = GPCMD_READ_TOC_PMA_ATIP;
- req.cmd[6] = trackno;
- req.cmd[7] = (buflen >> 8);
- req.cmd[8] = (buflen & 0xff);
- req.cmd[9] = (format << 6);
+ cmd[0] = GPCMD_READ_TOC_PMA_ATIP;
+ cmd[6] = trackno;
+ cmd[7] = (buflen >> 8);
+ cmd[8] = (buflen & 0xff);
+ cmd[9] = (format << 6);
if (msf_flag)
- req.cmd[1] = 2;
+ cmd[1] = 2;
- return ide_cd_queue_pc(drive, &req);
+ return ide_cd_queue_pc(drive, cmd, 0, buf, &buflen, sense, 0, REQ_QUIET);
}
/* Try to read the entire TOC for the disk into our internal buffer. */
@@ -2103,11 +2106,6 @@ static int ide_cd_probe(ide_drive_t *drive)
goto failed;
}
}
- if (drive->scsi) {
- printk(KERN_INFO "ide-cd: passing drive %s to ide-scsi "
- "emulation.\n", drive->name);
- goto failed;
- }
info = kzalloc(sizeof(struct cdrom_info), GFP_KERNEL);
if (info == NULL) {
printk(KERN_ERR "%s: Can't allocate a cdrom structure\n",
diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h
index a58801c..fe0ea36 100644
--- a/drivers/ide/ide-cd.h
+++ b/drivers/ide/ide-cd.h
@@ -143,8 +143,8 @@ struct cdrom_info {
void ide_cd_log_error(const char *, struct request *, struct request_sense *);
/* ide-cd.c functions used by ide-cd_ioctl.c */
-void ide_cd_init_rq(ide_drive_t *, struct request *);
-int ide_cd_queue_pc(ide_drive_t *, struct request *);
+int ide_cd_queue_pc(ide_drive_t *, const unsigned char *, int, void *,
+ unsigned *, struct request_sense *, int, unsigned int);
int ide_cd_read_toc(ide_drive_t *, struct request_sense *);
int ide_cdrom_get_capabilities(ide_drive_t *, u8 *);
void ide_cdrom_update_speed(ide_drive_t *, u8 *);
diff --git a/drivers/ide/ide-cd_ioctl.c b/drivers/ide/ide-cd_ioctl.c
index 6d147ce..24d002a 100644
--- a/drivers/ide/ide-cd_ioctl.c
+++ b/drivers/ide/ide-cd_ioctl.c
@@ -104,8 +104,8 @@ int cdrom_eject(ide_drive_t *drive, int ejectflag,
{
struct cdrom_info *cd = drive->driver_data;
struct cdrom_device_info *cdi = &cd->devinfo;
- struct request req;
char loej = 0x02;
+ unsigned char cmd[BLK_MAX_CDB];
if ((cd->cd_flags & IDE_CD_FLAG_NO_EJECT) && !ejectflag)
return -EDRIVE_CANT_DO_THIS;
@@ -114,17 +114,16 @@ int cdrom_eject(ide_drive_t *drive, int ejectflag,
if ((cd->cd_flags & IDE_CD_FLAG_DOOR_LOCKED) && ejectflag)
return 0;
- ide_cd_init_rq(drive, &req);
-
/* only tell drive to close tray if open, if it can do that */
if (ejectflag && (cdi->mask & CDC_CLOSE_TRAY))
loej = 0;
- req.sense = sense;
- req.cmd[0] = GPCMD_START_STOP_UNIT;
- req.cmd[4] = loej | (ejectflag != 0);
+ memset(cmd, 0, BLK_MAX_CDB);
+
+ cmd[0] = GPCMD_START_STOP_UNIT;
+ cmd[4] = loej | (ejectflag != 0);
- return ide_cd_queue_pc(drive, &req);
+ return ide_cd_queue_pc(drive, cmd, 0, NULL, 0, sense, 0, 0);
}
/* Lock the door if LOCKFLAG is nonzero; unlock it otherwise. */
@@ -134,7 +133,6 @@ int ide_cd_lockdoor(ide_drive_t *drive, int lockflag,
{
struct cdrom_info *cd = drive->driver_data;
struct request_sense my_sense;
- struct request req;
int stat;
if (sense == NULL)
@@ -144,11 +142,15 @@ int ide_cd_lockdoor(ide_drive_t *drive, int lockflag,
if (cd->cd_flags & IDE_CD_FLAG_NO_DOORLOCK) {
stat = 0;
} else {
- ide_cd_init_rq(drive, &req);
- req.sense = sense;
- req.cmd[0] = GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL;
- req.cmd[4] = lockflag ? 1 : 0;
- stat = ide_cd_queue_pc(drive, &req);
+ unsigned char cmd[BLK_MAX_CDB];
+
+ memset(cmd, 0, BLK_MAX_CDB);
+
+ cmd[0] = GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL;
+ cmd[4] = lockflag ? 1 : 0;
+
+ stat = ide_cd_queue_pc(drive, cmd, 0, NULL, 0,
+ sense, 0, 0);
}
/* If we got an illegal field error, the drive
@@ -206,32 +208,30 @@ int ide_cdrom_select_speed(struct cdrom_device_info *cdi, int speed)
{
ide_drive_t *drive = cdi->handle;
struct cdrom_info *cd = drive->driver_data;
- struct request rq;
struct request_sense sense;
u8 buf[ATAPI_CAPABILITIES_PAGE_SIZE];
int stat;
-
- ide_cd_init_rq(drive, &rq);
-
- rq.sense = &sense;
+ unsigned char cmd[BLK_MAX_CDB];
if (speed == 0)
speed = 0xffff; /* set to max */
else
speed *= 177; /* Nx to kbytes/s */
- rq.cmd[0] = GPCMD_SET_SPEED;
+ memset(cmd, 0, BLK_MAX_CDB);
+
+ cmd[0] = GPCMD_SET_SPEED;
/* Read Drive speed in kbytes/second MSB/LSB */
- rq.cmd[2] = (speed >> 8) & 0xff;
- rq.cmd[3] = speed & 0xff;
+ cmd[2] = (speed >> 8) & 0xff;
+ cmd[3] = speed & 0xff;
if ((cdi->mask & (CDC_CD_R | CDC_CD_RW | CDC_DVD_R)) !=
(CDC_CD_R | CDC_CD_RW | CDC_DVD_R)) {
/* Write Drive speed in kbytes/second MSB/LSB */
- rq.cmd[4] = (speed >> 8) & 0xff;
- rq.cmd[5] = speed & 0xff;
+ cmd[4] = (speed >> 8) & 0xff;
+ cmd[5] = speed & 0xff;
}
- stat = ide_cd_queue_pc(drive, &rq);
+ stat = ide_cd_queue_pc(drive, cmd, 0, NULL, 0, &sense, 0, 0);
if (!ide_cdrom_get_capabilities(drive, buf)) {
ide_cdrom_update_speed(drive, buf);
@@ -268,21 +268,19 @@ int ide_cdrom_get_mcn(struct cdrom_device_info *cdi,
{
ide_drive_t *drive = cdi->handle;
int stat, mcnlen;
- struct request rq;
char buf[24];
+ unsigned char cmd[BLK_MAX_CDB];
+ unsigned len = sizeof(buf);
- ide_cd_init_rq(drive, &rq);
+ memset(cmd, 0, BLK_MAX_CDB);
- rq.data = buf;
- rq.data_len = sizeof(buf);
+ cmd[0] = GPCMD_READ_SUBCHANNEL;
+ cmd[1] = 2; /* MSF addressing */
+ cmd[2] = 0x40; /* request subQ data */
+ cmd[3] = 2; /* format */
+ cmd[8] = len;
- rq.cmd[0] = GPCMD_READ_SUBCHANNEL;
- rq.cmd[1] = 2; /* MSF addressing */
- rq.cmd[2] = 0x40; /* request subQ data */
- rq.cmd[3] = 2; /* format */
- rq.cmd[8] = sizeof(buf);
-
- stat = ide_cd_queue_pc(drive, &rq);
+ stat = ide_cd_queue_pc(drive, cmd, 0, buf, &len, NULL, 0, 0);
if (stat)
return stat;
@@ -298,14 +296,14 @@ int ide_cdrom_reset(struct cdrom_device_info *cdi)
ide_drive_t *drive = cdi->handle;
struct cdrom_info *cd = drive->driver_data;
struct request_sense sense;
- struct request req;
+ struct request *rq;
int ret;
- ide_cd_init_rq(drive, &req);
- req.cmd_type = REQ_TYPE_SPECIAL;
- req.cmd_flags = REQ_QUIET;
- ret = ide_do_drive_cmd(drive, &req, ide_wait);
-
+ rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
+ rq->cmd_type = REQ_TYPE_SPECIAL;
+ rq->cmd_flags = REQ_QUIET;
+ ret = blk_execute_rq(drive->queue, cd->disk, rq, 0);
+ blk_put_request(rq);
/*
* A reset will unlock the door. If it was previously locked,
* lock it again.
@@ -351,8 +349,8 @@ static int ide_cd_fake_play_trkind(ide_drive_t *drive, void *arg)
struct atapi_toc_entry *first_toc, *last_toc;
unsigned long lba_start, lba_end;
int stat;
- struct request rq;
struct request_sense sense;
+ unsigned char cmd[BLK_MAX_CDB];
stat = ide_cd_get_toc_entry(drive, ti->cdti_trk0, &first_toc);
if (stat)
@@ -370,14 +368,13 @@ static int ide_cd_fake_play_trkind(ide_drive_t *drive, void *arg)
if (lba_end <= lba_start)
return -EINVAL;
- ide_cd_init_rq(drive, &rq);
+ memset(cmd, 0, BLK_MAX_CDB);
- rq.sense = &sense;
- rq.cmd[0] = GPCMD_PLAY_AUDIO_MSF;
- lba_to_msf(lba_start, &rq.cmd[3], &rq.cmd[4], &rq.cmd[5]);
- lba_to_msf(lba_end - 1, &rq.cmd[6], &rq.cmd[7], &rq.cmd[8]);
+ cmd[0] = GPCMD_PLAY_AUDIO_MSF;
+ lba_to_msf(lba_start, &cmd[3], &cmd[4], &cmd[5]);
+ lba_to_msf(lba_end - 1, &cmd[6], &cmd[7], &cmd[8]);
- return ide_cd_queue_pc(drive, &rq);
+ return ide_cd_queue_pc(drive, cmd, 0, NULL, 0, &sense, 0, 0);
}
static int ide_cd_read_tochdr(ide_drive_t *drive, void *arg)
@@ -447,8 +444,9 @@ int ide_cdrom_audio_ioctl(struct cdrom_device_info *cdi,
int ide_cdrom_packet(struct cdrom_device_info *cdi,
struct packet_command *cgc)
{
- struct request req;
ide_drive_t *drive = cdi->handle;
+ unsigned int flags = 0;
+ unsigned len = cgc->buflen;
if (cgc->timeout <= 0)
cgc->timeout = ATAPI_WAIT_PC;
@@ -456,24 +454,21 @@ int ide_cdrom_packet(struct cdrom_device_info *cdi,
/* here we queue the commands from the uniform CD-ROM
layer. the packet must be complete, as we do not
touch it at all. */
- ide_cd_init_rq(drive, &req);
if (cgc->data_direction == CGC_DATA_WRITE)
- req.cmd_flags |= REQ_RW;
+ flags |= REQ_RW;
- memcpy(req.cmd, cgc->cmd, CDROM_PACKET_SIZE);
if (cgc->sense)
memset(cgc->sense, 0, sizeof(struct request_sense));
- req.data = cgc->buffer;
- req.data_len = cgc->buflen;
- req.timeout = cgc->timeout;
if (cgc->quiet)
- req.cmd_flags |= REQ_QUIET;
+ flags |= REQ_QUIET;
- req.sense = cgc->sense;
- cgc->stat = ide_cd_queue_pc(drive, &req);
+ cgc->stat = ide_cd_queue_pc(drive, cgc->cmd,
+ cgc->data_direction == CGC_DATA_WRITE,
+ cgc->buffer, &len,
+ cgc->sense, cgc->timeout, flags);
if (!cgc->stat)
- cgc->buflen -= req.data_len;
+ cgc->buflen -= len;
return cgc->stat;
}
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 8e08d08..5f49a4a 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -198,8 +198,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
}
memset(&task, 0, sizeof(task));
- task.tf_flags = IDE_TFLAG_NO_SELECT_MASK; /* FIXME? */
- task.tf_flags |= (IDE_TFLAG_TF | IDE_TFLAG_DEVICE);
+ task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
if (drive->select.b.lba) {
if (lba48) {
@@ -617,7 +616,8 @@ static void idedisk_prepare_flush(struct request_queue *q, struct request *rq)
*/
static int set_multcount(ide_drive_t *drive, int arg)
{
- struct request rq;
+ struct request *rq;
+ int error;
if (arg < 0 || arg > drive->id->max_multsect)
return -EINVAL;
@@ -625,12 +625,13 @@ static int set_multcount(ide_drive_t *drive, int arg)
if (drive->special.b.set_multmode)
return -EBUSY;
- ide_init_drive_cmd(&rq);
- rq.cmd_type = REQ_TYPE_ATA_TASKFILE;
+ rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
+ rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
drive->mult_req = arg;
drive->special.b.set_multmode = 1;
- (void)ide_do_drive_cmd(drive, &rq, ide_wait);
+ error = blk_execute_rq(drive->queue, NULL, rq, 0);
+ blk_put_request(rq);
return (drive->mult_count == arg) ? 0 : -EIO;
}
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index 653b1ad..7ee44f8 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -463,7 +463,7 @@ int ide_dma_setup(ide_drive_t *drive)
}
/* PRD table */
- if (hwif->mmio)
+ if (hwif->host_flags & IDE_HFLAG_MMIO)
writel(hwif->dmatable_dma,
(void __iomem *)(hwif->dma_base + ATA_DMA_TABLE_OFS));
else
@@ -692,7 +692,7 @@ static int ide_tune_dma(ide_drive_t *drive)
ide_hwif_t *hwif = drive->hwif;
u8 speed;
- if (noautodma || drive->nodma || (drive->id->capability & 1) == 0)
+ if (drive->nodma || (drive->id->capability & 1) == 0)
return 0;
/* consult the list of known "bad" drives */
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index f05fbc2..b368943 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -286,11 +286,12 @@ static void idefloppy_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc,
{
struct ide_floppy_obj *floppy = drive->driver_data;
- ide_init_drive_cmd(rq);
+ blk_rq_init(NULL, rq);
rq->buffer = (char *) pc;
rq->cmd_type = REQ_TYPE_SPECIAL;
+ rq->cmd_flags |= REQ_PREEMPT;
rq->rq_disk = floppy->disk;
- (void) ide_do_drive_cmd(drive, rq, ide_preempt);
+ ide_do_drive_cmd(drive, rq);
}
static struct ide_atapi_pc *idefloppy_next_pc_storage(ide_drive_t *drive)
@@ -311,50 +312,41 @@ static struct request *idefloppy_next_rq_storage(ide_drive_t *drive)
return (&floppy->rq_stack[floppy->rq_stack_index++]);
}
-static void idefloppy_request_sense_callback(ide_drive_t *drive)
+static void ide_floppy_callback(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
- u8 *buf = floppy->pc->buf;
+ struct ide_atapi_pc *pc = floppy->pc;
+ int uptodate = pc->error ? 0 : 1;
debug_log("Reached %s\n", __func__);
- if (!floppy->pc->error) {
- floppy->sense_key = buf[2] & 0x0F;
- floppy->asc = buf[12];
- floppy->ascq = buf[13];
- floppy->progress_indication = buf[15] & 0x80 ?
- (u16)get_unaligned((u16 *)&buf[16]) : 0x10000;
+ if (floppy->failed_pc == pc)
+ floppy->failed_pc = NULL;
- if (floppy->failed_pc)
- debug_log("pc = %x, sense key = %x, asc = %x,"
- " ascq = %x\n",
- floppy->failed_pc->c[0],
- floppy->sense_key,
- floppy->asc,
- floppy->ascq);
- else
- debug_log("sense key = %x, asc = %x, ascq = %x\n",
- floppy->sense_key,
- floppy->asc,
- floppy->ascq);
+ if (pc->c[0] == GPCMD_READ_10 || pc->c[0] == GPCMD_WRITE_10 ||
+ (pc->rq && blk_pc_request(pc->rq)))
+ uptodate = 1; /* FIXME */
+ else if (pc->c[0] == GPCMD_REQUEST_SENSE) {
+ u8 *buf = floppy->pc->buf;
+ if (!pc->error) {
+ floppy->sense_key = buf[2] & 0x0F;
+ floppy->asc = buf[12];
+ floppy->ascq = buf[13];
+ floppy->progress_indication = buf[15] & 0x80 ?
+ (u16)get_unaligned((u16 *)&buf[16]) : 0x10000;
- idefloppy_end_request(drive, 1, 0);
- } else {
- printk(KERN_ERR "Error in REQUEST SENSE itself - Aborting"
- " request!\n");
- idefloppy_end_request(drive, 0, 0);
- }
-}
+ if (floppy->failed_pc)
+ debug_log("pc = %x, ", floppy->failed_pc->c[0]);
-/* General packet command callback function. */
-static void idefloppy_pc_callback(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
-
- debug_log("Reached %s\n", __func__);
+ debug_log("sense key = %x, asc = %x, ascq = %x\n",
+ floppy->sense_key, floppy->asc, floppy->ascq);
+ } else
+ printk(KERN_ERR "Error in REQUEST SENSE itself - "
+ "Aborting request!\n");
+ }
- idefloppy_end_request(drive, floppy->pc->error ? 0 : 1, 0);
+ idefloppy_end_request(drive, uptodate, 0);
}
static void idefloppy_init_pc(struct ide_atapi_pc *pc)
@@ -365,7 +357,7 @@ static void idefloppy_init_pc(struct ide_atapi_pc *pc)
pc->req_xfer = 0;
pc->buf = pc->pc_buf;
pc->buf_size = IDEFLOPPY_PC_BUFFER_SIZE;
- pc->idefloppy_callback = &idefloppy_pc_callback;
+ pc->callback = ide_floppy_callback;
}
static void idefloppy_create_request_sense_cmd(struct ide_atapi_pc *pc)
@@ -374,7 +366,6 @@ static void idefloppy_create_request_sense_cmd(struct ide_atapi_pc *pc)
pc->c[0] = GPCMD_REQUEST_SENSE;
pc->c[4] = 255;
pc->req_xfer = 18;
- pc->idefloppy_callback = &idefloppy_request_sense_callback;
}
/*
@@ -397,174 +388,19 @@ static void idefloppy_retry_pc(ide_drive_t *drive)
static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
- ide_hwif_t *hwif = drive->hwif;
- struct ide_atapi_pc *pc = floppy->pc;
- struct request *rq = pc->rq;
- xfer_func_t *xferfunc;
- unsigned int temp;
- int dma_error = 0;
- u16 bcount;
- u8 stat, ireason;
-
- debug_log("Reached %s interrupt handler\n", __func__);
-
- if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
- dma_error = hwif->dma_ops->dma_end(drive);
- if (dma_error) {
- printk(KERN_ERR "%s: DMA %s error\n", drive->name,
- rq_data_dir(rq) ? "write" : "read");
- pc->flags |= PC_FLAG_DMA_ERROR;
- } else {
- pc->xferred = pc->req_xfer;
- idefloppy_update_buffers(drive, pc);
- }
- debug_log("DMA finished\n");
- }
-
- /* Clear the interrupt */
- stat = ide_read_status(drive);
-
- /* No more interrupts */
- if ((stat & DRQ_STAT) == 0) {
- debug_log("Packet command completed, %d bytes transferred\n",
- pc->xferred);
- pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
-
- local_irq_enable_in_hardirq();
-
- if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) {
- /* Error detected */
- debug_log("%s: I/O error\n", drive->name);
- rq->errors++;
- if (pc->c[0] == GPCMD_REQUEST_SENSE) {
- printk(KERN_ERR "ide-floppy: I/O error in "
- "request sense command\n");
- return ide_do_reset(drive);
- }
- /* Retry operation */
- idefloppy_retry_pc(drive);
- /* queued, but not started */
- return ide_stopped;
- }
- pc->error = 0;
- if (floppy->failed_pc == pc)
- floppy->failed_pc = NULL;
- /* Command finished - Call the callback function */
- pc->idefloppy_callback(drive);
- return ide_stopped;
- }
-
- if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
- pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
- printk(KERN_ERR "ide-floppy: The floppy wants to issue "
- "more interrupts in DMA mode\n");
- ide_dma_off(drive);
- return ide_do_reset(drive);
- }
-
- /* Get the number of bytes to transfer */
- bcount = (hwif->INB(hwif->io_ports.lbah_addr) << 8) |
- hwif->INB(hwif->io_ports.lbam_addr);
- /* on this interrupt */
- ireason = hwif->INB(hwif->io_ports.nsect_addr);
-
- if (ireason & CD) {
- printk(KERN_ERR "ide-floppy: CoD != 0 in %s\n", __func__);
- return ide_do_reset(drive);
- }
- if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) {
- /* Hopefully, we will never get here */
- printk(KERN_ERR "ide-floppy: We wanted to %s, ",
- (ireason & IO) ? "Write" : "Read");
- printk(KERN_ERR "but the floppy wants us to %s !\n",
- (ireason & IO) ? "Read" : "Write");
- return ide_do_reset(drive);
- }
- if (!(pc->flags & PC_FLAG_WRITING)) {
- /* Reading - Check that we have enough space */
- temp = pc->xferred + bcount;
- if (temp > pc->req_xfer) {
- if (temp > pc->buf_size) {
- printk(KERN_ERR "ide-floppy: The floppy wants "
- "to send us more data than expected "
- "- discarding data\n");
- ide_pad_transfer(drive, 0, bcount);
-
- ide_set_handler(drive,
- &idefloppy_pc_intr,
- IDEFLOPPY_WAIT_CMD,
- NULL);
- return ide_started;
- }
- debug_log("The floppy wants to send us more data than"
- " expected - allowing transfer\n");
- }
- }
- if (pc->flags & PC_FLAG_WRITING)
- xferfunc = hwif->output_data;
- else
- xferfunc = hwif->input_data;
-
- if (pc->buf)
- xferfunc(drive, NULL, pc->cur_pos, bcount);
- else
- ide_floppy_io_buffers(drive, pc, bcount,
- !!(pc->flags & PC_FLAG_WRITING));
-
- /* Update the current position */
- pc->xferred += bcount;
- pc->cur_pos += bcount;
-
- /* And set the interrupt handler again */
- ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL);
- return ide_started;
-}
-
-/*
- * This is the original routine that did the packet transfer.
- * It fails at high speeds on the Iomega ZIP drive, so there's a slower version
- * for that drive below. The algorithm is chosen based on drive type
- */
-static ide_startstop_t idefloppy_transfer_pc(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- ide_startstop_t startstop;
- idefloppy_floppy_t *floppy = drive->driver_data;
- u8 ireason;
-
- if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
- printk(KERN_ERR "ide-floppy: Strange, packet command "
- "initiated yet DRQ isn't asserted\n");
- return startstop;
- }
- ireason = hwif->INB(hwif->io_ports.nsect_addr);
- if ((ireason & CD) == 0 || (ireason & IO)) {
- printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) while "
- "issuing a packet command\n");
- return ide_do_reset(drive);
- }
- /* Set the interrupt routine */
- ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL);
-
- /* Send the actual packet */
- hwif->output_data(drive, NULL, floppy->pc->c, 12);
-
- return ide_started;
+ return ide_pc_intr(drive, floppy->pc, idefloppy_pc_intr,
+ IDEFLOPPY_WAIT_CMD, NULL, idefloppy_update_buffers,
+ idefloppy_retry_pc, NULL, ide_floppy_io_buffers);
}
-
/*
* What we have here is a classic case of a top half / bottom half interrupt
* service routine. In interrupt mode, the device sends an interrupt to signal
* that it is ready to receive a packet. However, we need to delay about 2-3
* ticks before issuing the packet or we gets in trouble.
- *
- * So, follow carefully. transfer_pc1 is called as an interrupt (or directly).
- * In either case, when the device says it's ready for a packet, we schedule
- * the packet transfer to occur about 2-3 ticks later in transfer_pc2.
*/
-static int idefloppy_transfer_pc2(ide_drive_t *drive)
+static int idefloppy_transfer_pc(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
@@ -575,24 +411,19 @@ static int idefloppy_transfer_pc2(ide_drive_t *drive)
return IDEFLOPPY_WAIT_CMD;
}
-static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive)
+
+/*
+ * Called as an interrupt (or directly). When the device says it's ready for a
+ * packet, we schedule the packet transfer to occur about 2-3 ticks later in
+ * transfer_pc.
+ */
+static ide_startstop_t idefloppy_start_pc_transfer(ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
idefloppy_floppy_t *floppy = drive->driver_data;
- ide_startstop_t startstop;
- u8 ireason;
+ struct ide_atapi_pc *pc = floppy->pc;
+ ide_expiry_t *expiry;
+ unsigned int timeout;
- if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
- printk(KERN_ERR "ide-floppy: Strange, packet command "
- "initiated yet DRQ isn't asserted\n");
- return startstop;
- }
- ireason = hwif->INB(hwif->io_ports.nsect_addr);
- if ((ireason & CD) == 0 || (ireason & IO)) {
- printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) "
- "while issuing a packet command\n");
- return ide_do_reset(drive);
- }
/*
* The following delay solves a problem with ATAPI Zip 100 drives
* where the Busy flag was apparently being deasserted before the
@@ -601,10 +432,15 @@ static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive)
* 40 and 50msec work well. idefloppy_pc_intr will not be actually
* used until after the packet is moved in about 50 msec.
*/
+ if (pc->flags & PC_FLAG_ZIP_DRIVE) {
+ timeout = floppy->ticks;
+ expiry = &idefloppy_transfer_pc;
+ } else {
+ timeout = IDEFLOPPY_WAIT_CMD;
+ expiry = NULL;
+ }
- ide_set_handler(drive, &idefloppy_pc_intr, floppy->ticks,
- &idefloppy_transfer_pc2);
- return ide_started;
+ return ide_transfer_pc(drive, pc, idefloppy_pc_intr, timeout, expiry);
}
static void ide_floppy_report_error(idefloppy_floppy_t *floppy,
@@ -627,10 +463,6 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
struct ide_atapi_pc *pc)
{
idefloppy_floppy_t *floppy = drive->driver_data;
- ide_hwif_t *hwif = drive->hwif;
- ide_handler_t *pkt_xfer_routine;
- u16 bcount;
- u8 dma;
if (floppy->failed_pc == NULL &&
pc->c[0] != GPCMD_REQUEST_SENSE)
@@ -645,65 +477,16 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
pc->error = IDEFLOPPY_ERROR_GENERAL;
floppy->failed_pc = NULL;
- pc->idefloppy_callback(drive);
+ pc->callback(drive);
return ide_stopped;
}
debug_log("Retry number - %d\n", pc->retries);
pc->retries++;
- /* We haven't transferred any data yet */
- pc->xferred = 0;
- pc->cur_pos = pc->buf;
- bcount = min(pc->req_xfer, 63 * 1024);
-
- if (pc->flags & PC_FLAG_DMA_ERROR) {
- pc->flags &= ~PC_FLAG_DMA_ERROR;
- ide_dma_off(drive);
- }
- dma = 0;
-
- if ((pc->flags & PC_FLAG_DMA_RECOMMENDED) && drive->using_dma)
- dma = !hwif->dma_ops->dma_setup(drive);
- ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK |
- IDE_TFLAG_OUT_DEVICE, bcount, dma);
-
- if (dma) {
- /* Begin DMA, if necessary */
- pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
- hwif->dma_ops->dma_start(drive);
- }
-
- /* Can we transfer the packet when we get the interrupt or wait? */
- if (floppy->flags & IDEFLOPPY_FLAG_ZIP_DRIVE) {
- /* wait */
- pkt_xfer_routine = &idefloppy_transfer_pc1;
- } else {
- /* immediate */
- pkt_xfer_routine = &idefloppy_transfer_pc;
- }
-
- if (floppy->flags & IDEFLOPPY_FLAG_DRQ_INTERRUPT) {
- /* Issue the packet command */
- ide_execute_command(drive, WIN_PACKETCMD,
- pkt_xfer_routine,
- IDEFLOPPY_WAIT_CMD,
- NULL);
- return ide_started;
- } else {
- /* Issue the packet command */
- ide_execute_pkt_cmd(drive);
- return (*pkt_xfer_routine) (drive);
- }
-}
-
-static void idefloppy_rw_callback(ide_drive_t *drive)
-{
- debug_log("Reached %s\n", __func__);
-
- idefloppy_end_request(drive, 1, 0);
- return;
+ return ide_issue_pc(drive, pc, idefloppy_start_pc_transfer,
+ IDEFLOPPY_WAIT_CMD, NULL);
}
static void idefloppy_create_prevent_cmd(struct ide_atapi_pc *pc, int prevent)
@@ -800,21 +583,19 @@ static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy,
put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]);
put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[2]);
- pc->idefloppy_callback = &idefloppy_rw_callback;
pc->rq = rq;
pc->b_count = cmd == READ ? 0 : rq->bio->bi_size;
if (rq->cmd_flags & REQ_RW)
pc->flags |= PC_FLAG_WRITING;
pc->buf = NULL;
pc->req_xfer = pc->buf_size = blocks * floppy->block_size;
- pc->flags |= PC_FLAG_DMA_RECOMMENDED;
+ pc->flags |= PC_FLAG_DMA_OK;
}
static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy,
struct ide_atapi_pc *pc, struct request *rq)
{
idefloppy_init_pc(pc);
- pc->idefloppy_callback = &idefloppy_rw_callback;
memcpy(pc->c, rq->cmd, sizeof(pc->c));
pc->rq = rq;
pc->b_count = rq->data_len;
@@ -822,7 +603,7 @@ static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy,
pc->flags |= PC_FLAG_WRITING;
pc->buf = rq->data;
if (rq->bio)
- pc->flags |= PC_FLAG_DMA_RECOMMENDED;
+ pc->flags |= PC_FLAG_DMA_OK;
/*
* possibly problematic, doesn't look like ide-floppy correctly
* handled scattered requests if dma fails...
@@ -875,7 +656,14 @@ static ide_startstop_t idefloppy_do_request(ide_drive_t *drive,
return ide_stopped;
}
+ if (floppy->flags & IDEFLOPPY_FLAG_DRQ_INTERRUPT)
+ pc->flags |= PC_FLAG_DRQ_INTERRUPT;
+
+ if (floppy->flags & IDEFLOPPY_FLAG_ZIP_DRIVE)
+ pc->flags |= PC_FLAG_ZIP_DRIVE;
+
pc->rq = rq;
+
return idefloppy_issue_pc(drive, pc);
}
@@ -886,14 +674,16 @@ static ide_startstop_t idefloppy_do_request(ide_drive_t *drive,
static int idefloppy_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc)
{
struct ide_floppy_obj *floppy = drive->driver_data;
- struct request rq;
+ struct request *rq;
+ int error;
- ide_init_drive_cmd(&rq);
- rq.buffer = (char *) pc;
- rq.cmd_type = REQ_TYPE_SPECIAL;
- rq.rq_disk = floppy->disk;
+ rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
+ rq->buffer = (char *) pc;
+ rq->cmd_type = REQ_TYPE_SPECIAL;
+ error = blk_execute_rq(drive->queue, floppy->disk, rq, 0);
+ blk_put_request(rq);
- return ide_do_drive_cmd(drive, &rq, ide_wait);
+ return error;
}
/*
@@ -1622,11 +1412,6 @@ static int ide_floppy_probe(ide_drive_t *drive)
" of ide-floppy\n", drive->name);
goto failed;
}
- if (drive->scsi) {
- printk(KERN_INFO "ide-floppy: passing drive %s to ide-scsi"
- " emulation.\n", drive->name);
- goto failed;
- }
floppy = kzalloc(sizeof(idefloppy_floppy_t), GFP_KERNEL);
if (!floppy) {
printk(KERN_ERR "ide-floppy: %s: Can't allocate a floppy"
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 6965253..2805774 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -358,31 +358,6 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err)
EXPORT_SYMBOL(ide_end_drive_cmd);
-/**
- * try_to_flush_leftover_data - flush junk
- * @drive: drive to flush
- *
- * try_to_flush_leftover_data() is invoked in response to a drive
- * unexpectedly having its DRQ_STAT bit set. As an alternative to
- * resetting the drive, this routine tries to clear the condition
- * by read a sector's worth of data from the drive. Of course,
- * this may not help if the drive is *waiting* for data from *us*.
- */
-static void try_to_flush_leftover_data (ide_drive_t *drive)
-{
- int i = (drive->mult_count ? drive->mult_count : 1) * SECTOR_WORDS;
-
- if (drive->media != ide_disk)
- return;
- while (i > 0) {
- u32 buffer[16];
- u32 wcount = (i > 16) ? 16 : i;
-
- i -= wcount;
- drive->hwif->input_data(drive, NULL, buffer, wcount * 4);
- }
-}
-
static void ide_kill_rq(ide_drive_t *drive, struct request *rq)
{
if (rq->rq_disk) {
@@ -422,8 +397,11 @@ static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, u8
}
if ((stat & DRQ_STAT) && rq_data_dir(rq) == READ &&
- (hwif->host_flags & IDE_HFLAG_ERROR_STOPS_FIFO) == 0)
- try_to_flush_leftover_data(drive);
+ (hwif->host_flags & IDE_HFLAG_ERROR_STOPS_FIFO) == 0) {
+ int nsect = drive->mult_count ? drive->mult_count : 1;
+
+ ide_pad_transfer(drive, READ, nsect * SECTOR_SIZE);
+ }
if (rq->errors >= ERROR_MAX || blk_noretry_request(rq)) {
ide_kill_rq(drive, rq);
@@ -459,7 +437,7 @@ static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq, u
if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT))
/* force an abort */
- hwif->OUTBSYNC(drive, WIN_IDLEIMMEDIATE,
+ hwif->OUTBSYNC(hwif, WIN_IDLEIMMEDIATE,
hwif->io_ports.command_addr);
if (rq->errors >= ERROR_MAX) {
@@ -1539,88 +1517,30 @@ irqreturn_t ide_intr (int irq, void *dev_id)
}
/**
- * ide_init_drive_cmd - initialize a drive command request
- * @rq: request object
- *
- * Initialize a request before we fill it in and send it down to
- * ide_do_drive_cmd. Commands must be set up by this function. Right
- * now it doesn't do a lot, but if that changes abusers will have a
- * nasty surprise.
- */
-
-void ide_init_drive_cmd (struct request *rq)
-{
- blk_rq_init(NULL, rq);
-}
-
-EXPORT_SYMBOL(ide_init_drive_cmd);
-
-/**
* ide_do_drive_cmd - issue IDE special command
* @drive: device to issue command
* @rq: request to issue
- * @action: action for processing
*
* This function issues a special IDE device request
* onto the request queue.
*
- * If action is ide_wait, then the rq is queued at the end of the
- * request queue, and the function sleeps until it has been processed.
- * This is for use when invoked from an ioctl handler.
- *
- * If action is ide_preempt, then the rq is queued at the head of
- * the request queue, displacing the currently-being-processed
- * request and this function returns immediately without waiting
- * for the new rq to be completed. This is VERY DANGEROUS, and is
- * intended for careful use by the ATAPI tape/cdrom driver code.
- *
- * If action is ide_end, then the rq is queued at the end of the
- * request queue, and the function returns immediately without waiting
- * for the new rq to be completed. This is again intended for careful
- * use by the ATAPI tape/cdrom driver code.
+ * the rq is queued at the head of the request queue, displacing
+ * the currently-being-processed request and this function
+ * returns immediately without waiting for the new rq to be
+ * completed. This is VERY DANGEROUS, and is intended for
+ * careful use by the ATAPI tape/cdrom driver code.
*/
-
-int ide_do_drive_cmd (ide_drive_t *drive, struct request *rq, ide_action_t action)
+
+void ide_do_drive_cmd(ide_drive_t *drive, struct request *rq)
{
unsigned long flags;
ide_hwgroup_t *hwgroup = HWGROUP(drive);
- DECLARE_COMPLETION_ONSTACK(wait);
- int where = ELEVATOR_INSERT_BACK, err;
- int must_wait = (action == ide_wait || action == ide_head_wait);
-
- rq->errors = 0;
-
- /*
- * we need to hold an extra reference to request for safe inspection
- * after completion
- */
- if (must_wait) {
- rq->ref_count++;
- rq->end_io_data = &wait;
- rq->end_io = blk_end_sync_rq;
- }
spin_lock_irqsave(&ide_lock, flags);
- if (action == ide_preempt)
- hwgroup->rq = NULL;
- if (action == ide_preempt || action == ide_head_wait) {
- where = ELEVATOR_INSERT_FRONT;
- rq->cmd_flags |= REQ_PREEMPT;
- }
- __elv_add_request(drive->queue, rq, where, 0);
- ide_do_request(hwgroup, IDE_NO_IRQ);
+ hwgroup->rq = NULL;
+ __elv_add_request(drive->queue, rq, ELEVATOR_INSERT_FRONT, 1);
+ __generic_unplug_device(drive->queue);
spin_unlock_irqrestore(&ide_lock, flags);
-
- err = 0;
- if (must_wait) {
- wait_for_completion(&wait);
- if (rq->errors)
- err = -EIO;
-
- blk_put_request(rq);
- }
-
- return err;
}
EXPORT_SYMBOL(ide_do_drive_cmd);
@@ -1637,6 +1557,8 @@ void ide_pktcmd_tf_load(ide_drive_t *drive, u32 tf_flags, u16 bcount, u8 dma)
task.tf.lbah = (bcount >> 8) & 0xff;
ide_tf_dump(drive->name, &task.tf);
+ ide_set_irq(drive, 1);
+ SELECT_MASK(drive, 0);
drive->hwif->tf_load(drive, &task);
}
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 0daf923..80ad4f2 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -42,7 +42,7 @@ static void ide_outb (u8 val, unsigned long port)
outb(val, port);
}
-static void ide_outbsync (ide_drive_t *drive, u8 addr, unsigned long port)
+static void ide_outbsync(ide_hwif_t *hwif, u8 addr, unsigned long port)
{
outb(addr, port);
}
@@ -68,7 +68,7 @@ static void ide_mm_outb (u8 value, unsigned long port)
writeb(value, (void __iomem *) port);
}
-static void ide_mm_outbsync (ide_drive_t *drive, u8 value, unsigned long port)
+static void ide_mm_outbsync(ide_hwif_t *hwif, u8 value, unsigned long port)
{
writeb(value, (void __iomem *) port);
}
@@ -95,7 +95,7 @@ void SELECT_DRIVE (ide_drive_t *drive)
hwif->OUTB(drive->select.all, hwif->io_ports.device_addr);
}
-static void SELECT_MASK(ide_drive_t *drive, int mask)
+void SELECT_MASK(ide_drive_t *drive, int mask)
{
const struct ide_port_ops *port_ops = drive->hwif->port_ops;
@@ -120,11 +120,6 @@ static void ide_tf_load(ide_drive_t *drive, ide_task_t *task)
if (task->tf_flags & IDE_TFLAG_FLAGGED)
HIHI = 0xFF;
- ide_set_irq(drive, 1);
-
- if ((task->tf_flags & IDE_TFLAG_NO_SELECT_MASK) == 0)
- SELECT_MASK(drive, 0);
-
if (task->tf_flags & IDE_TFLAG_OUT_DATA) {
u16 data = (tf->hob_data << 8) | tf->data;
@@ -191,7 +186,7 @@ static void ide_tf_read(ide_drive_t *drive, ide_task_t *task)
}
/* be sure we're looking at the low order bits */
- tf_outb(drive->ctl & ~0x80, io_ports->ctl_addr);
+ tf_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr);
if (task->tf_flags & IDE_TFLAG_IN_NSECT)
tf->nsect = tf_inb(io_ports->nsect_addr);
@@ -205,7 +200,7 @@ static void ide_tf_read(ide_drive_t *drive, ide_task_t *task)
tf->device = tf_inb(io_ports->device_addr);
if (task->tf_flags & IDE_TFLAG_LBA48) {
- tf_outb(drive->ctl | 0x80, io_ports->ctl_addr);
+ tf_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr);
if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
tf->hob_feature = tf_inb(io_ports->feature_addr);
@@ -689,9 +684,9 @@ int ide_driveid_update(ide_drive_t *drive)
*/
SELECT_MASK(drive, 1);
- ide_set_irq(drive, 1);
+ ide_set_irq(drive, 0);
msleep(50);
- hwif->OUTBSYNC(drive, WIN_IDENTIFY, hwif->io_ports.command_addr);
+ hwif->OUTBSYNC(hwif, WIN_IDENTIFY, hwif->io_ports.command_addr);
timeout = jiffies + WAIT_WORSTCASE;
do {
if (time_after(jiffies, timeout)) {
@@ -744,9 +739,6 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
int error = 0;
u8 stat;
-// while (HWGROUP(drive)->busy)
-// msleep(50);
-
#ifdef CONFIG_BLK_DEV_IDEDMA
if (hwif->dma_ops) /* check if host supports DMA */
hwif->dma_ops->dma_host_set(drive, 0);
@@ -781,7 +773,7 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
ide_set_irq(drive, 0);
hwif->OUTB(speed, io_ports->nsect_addr);
hwif->OUTB(SETFEATURES_XFER, io_ports->feature_addr);
- hwif->OUTBSYNC(drive, WIN_SETFEATURES, io_ports->command_addr);
+ hwif->OUTBSYNC(hwif, WIN_SETFEATURES, io_ports->command_addr);
if (drive->quirk_list == 2)
ide_set_irq(drive, 1);
@@ -889,7 +881,7 @@ void ide_execute_command(ide_drive_t *drive, u8 cmd, ide_handler_t *handler,
spin_lock_irqsave(&ide_lock, flags);
__ide_set_handler(drive, handler, timeout, expiry);
- hwif->OUTBSYNC(drive, cmd, hwif->io_ports.command_addr);
+ hwif->OUTBSYNC(hwif, cmd, hwif->io_ports.command_addr);
/*
* Drive takes 400nS to respond, we must avoid the IRQ being
* serviced before that.
@@ -907,7 +899,7 @@ void ide_execute_pkt_cmd(ide_drive_t *drive)
unsigned long flags;
spin_lock_irqsave(&ide_lock, flags);
- hwif->OUTBSYNC(drive, WIN_PACKETCMD, hwif->io_ports.command_addr);
+ hwif->OUTBSYNC(hwif, WIN_PACKETCMD, hwif->io_ports.command_addr);
ndelay(400);
spin_unlock_irqrestore(&ide_lock, flags);
}
@@ -1102,7 +1094,7 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi)
pre_reset(drive);
SELECT_DRIVE(drive);
udelay (20);
- hwif->OUTBSYNC(drive, WIN_SRST, io_ports->command_addr);
+ hwif->OUTBSYNC(hwif, WIN_SRST, io_ports->command_addr);
ndelay(400);
hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE;
hwgroup->polling = 1;
@@ -1133,14 +1125,14 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi)
* recover from reset very quickly, saving us the first 50ms wait time.
*/
/* set SRST and nIEN */
- hwif->OUTBSYNC(drive, drive->ctl|6, io_ports->ctl_addr);
+ hwif->OUTBSYNC(hwif, ATA_DEVCTL_OBS | 6, io_ports->ctl_addr);
/* more than enough time */
udelay(10);
if (drive->quirk_list == 2)
- ctl = drive->ctl; /* clear SRST and nIEN */
+ ctl = ATA_DEVCTL_OBS; /* clear SRST and nIEN */
else
- ctl = drive->ctl | 2; /* clear SRST, leave nIEN */
- hwif->OUTBSYNC(drive, ctl, io_ports->ctl_addr);
+ ctl = ATA_DEVCTL_OBS | 2; /* clear SRST, leave nIEN */
+ hwif->OUTBSYNC(hwif, ctl, io_ports->ctl_addr);
/* more than enough time */
udelay(10);
hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE;
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 26e68b6..d21e51a 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -293,7 +293,7 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
hwif->OUTB(0, io_ports->feature_addr);
/* ask drive for ID */
- hwif->OUTBSYNC(drive, cmd, io_ports->command_addr);
+ hwif->OUTBSYNC(hwif, cmd, hwif->io_ports.command_addr);
timeout = ((cmd == WIN_IDENTIFY) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2;
timeout += jiffies;
@@ -478,9 +478,9 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
printk(KERN_ERR "%s: no response (status = 0x%02x), "
"resetting drive\n", drive->name, stat);
msleep(50);
- hwif->OUTB(drive->select.all, io_ports->device_addr);
+ SELECT_DRIVE(drive);
msleep(50);
- hwif->OUTBSYNC(drive, WIN_SRST, io_ports->command_addr);
+ hwif->OUTBSYNC(hwif, WIN_SRST, io_ports->command_addr);
(void)ide_busy_sleep(hwif);
rc = try_to_identify(drive, cmd);
}
@@ -516,7 +516,7 @@ static void enable_nest (ide_drive_t *drive)
printk("%s: enabling %s -- ", hwif->name, drive->id->model);
SELECT_DRIVE(drive);
msleep(50);
- hwif->OUTBSYNC(drive, EXABYTE_ENABLE_NEST, hwif->io_ports.command_addr);
+ hwif->OUTBSYNC(hwif, EXABYTE_ENABLE_NEST, hwif->io_ports.command_addr);
if (ide_busy_sleep(hwif)) {
printk(KERN_CONT "failed (timeout)\n");
@@ -1065,7 +1065,7 @@ static int init_irq (ide_hwif_t *hwif)
if (io_ports->ctl_addr)
/* clear nIEN */
- hwif->OUTB(0x08, io_ports->ctl_addr);
+ hwif->OUTBSYNC(hwif, ATA_DEVCTL_OBS, io_ports->ctl_addr);
if (request_irq(hwif->irq,&ide_intr,sa,hwif->name,hwgroup))
goto out_unlink;
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 1e1f263..6e1233b 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -144,9 +144,6 @@ enum {
/*************************** End of tunable parameters ***********************/
-/* Read/Write error simulation */
-#define SIMULATE_ERRORS 0
-
/* tape directions */
enum {
IDETAPE_DIR_NONE = (1 << 0),
@@ -442,7 +439,7 @@ static void idetape_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
}
}
-static void idetape_update_buffers(struct ide_atapi_pc *pc)
+static void idetape_update_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc)
{
struct idetape_bh *bh = pc->bh;
int count;
@@ -506,18 +503,6 @@ static struct request *idetape_next_rq_storage(ide_drive_t *drive)
return (&tape->rq_stack[tape->rq_stack_index++]);
}
-static void idetape_init_pc(struct ide_atapi_pc *pc)
-{
- memset(pc->c, 0, 12);
- pc->retries = 0;
- pc->flags = 0;
- pc->req_xfer = 0;
- pc->buf = pc->pc_buf;
- pc->buf_size = IDETAPE_PC_BUFFER_SIZE;
- pc->bh = NULL;
- pc->b_data = NULL;
-}
-
/*
* called on each failed packet command retry to analyze the request sense. We
* currently do not utilize this information.
@@ -538,8 +523,8 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
if (pc->flags & PC_FLAG_DMA_ERROR) {
pc->xferred = pc->req_xfer -
tape->blk_size *
- be32_to_cpu(get_unaligned((u32 *)&sense[3]));
- idetape_update_buffers(pc);
+ get_unaligned_be32(&sense[3]);
+ idetape_update_buffers(drive, pc);
}
/*
@@ -634,21 +619,78 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
return 0;
}
-static ide_startstop_t idetape_request_sense_callback(ide_drive_t *drive)
+static void ide_tape_callback(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
+ struct ide_atapi_pc *pc = tape->pc;
+ int uptodate = pc->error ? 0 : 1;
debug_log(DBG_PROCS, "Enter %s\n", __func__);
- if (!tape->pc->error) {
- idetape_analyze_error(drive, tape->pc->buf);
- idetape_end_request(drive, 1, 0);
- } else {
- printk(KERN_ERR "ide-tape: Error in REQUEST SENSE itself - "
- "Aborting request!\n");
- idetape_end_request(drive, 0, 0);
+ if (tape->failed_pc == pc)
+ tape->failed_pc = NULL;
+
+ if (pc->c[0] == REQUEST_SENSE) {
+ if (uptodate)
+ idetape_analyze_error(drive, pc->buf);
+ else
+ printk(KERN_ERR "ide-tape: Error in REQUEST SENSE "
+ "itself - Aborting request!\n");
+ } else if (pc->c[0] == READ_6 || pc->c[0] == WRITE_6) {
+ struct request *rq = drive->hwif->hwgroup->rq;
+ int blocks = pc->xferred / tape->blk_size;
+
+ tape->avg_size += blocks * tape->blk_size;
+
+ if (time_after_eq(jiffies, tape->avg_time + HZ)) {
+ tape->avg_speed = tape->avg_size * HZ /
+ (jiffies - tape->avg_time) / 1024;
+ tape->avg_size = 0;
+ tape->avg_time = jiffies;
+ }
+
+ tape->first_frame += blocks;
+ rq->current_nr_sectors -= blocks;
+
+ if (pc->error)
+ uptodate = pc->error;
+ } else if (pc->c[0] == READ_POSITION && uptodate) {
+ u8 *readpos = tape->pc->buf;
+
+ debug_log(DBG_SENSE, "BOP - %s\n",
+ (readpos[0] & 0x80) ? "Yes" : "No");
+ debug_log(DBG_SENSE, "EOP - %s\n",
+ (readpos[0] & 0x40) ? "Yes" : "No");
+
+ if (readpos[0] & 0x4) {
+ printk(KERN_INFO "ide-tape: Block location is unknown"
+ "to the tape\n");
+ clear_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags);
+ uptodate = 0;
+ } else {
+ debug_log(DBG_SENSE, "Block Location - %u\n",
+ be32_to_cpu(*(u32 *)&readpos[4]));
+
+ tape->partition = readpos[1];
+ tape->first_frame = be32_to_cpu(*(u32 *)&readpos[4]);
+ set_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags);
+ }
}
- return ide_stopped;
+
+ idetape_end_request(drive, uptodate, 0);
+}
+
+static void idetape_init_pc(struct ide_atapi_pc *pc)
+{
+ memset(pc->c, 0, 12);
+ pc->retries = 0;
+ pc->flags = 0;
+ pc->req_xfer = 0;
+ pc->buf = pc->pc_buf;
+ pc->buf_size = IDETAPE_PC_BUFFER_SIZE;
+ pc->bh = NULL;
+ pc->b_data = NULL;
+ pc->callback = ide_tape_callback;
}
static void idetape_create_request_sense_cmd(struct ide_atapi_pc *pc)
@@ -657,7 +699,6 @@ static void idetape_create_request_sense_cmd(struct ide_atapi_pc *pc)
pc->c[0] = REQUEST_SENSE;
pc->c[4] = 20;
pc->req_xfer = 20;
- pc->idetape_callback = &idetape_request_sense_callback;
}
static void idetape_init_rq(struct request *rq, u8 cmd)
@@ -688,9 +729,10 @@ static void idetape_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc,
struct ide_tape_obj *tape = drive->driver_data;
idetape_init_rq(rq, REQ_IDETAPE_PC1);
+ rq->cmd_flags |= REQ_PREEMPT;
rq->buffer = (char *) pc;
rq->rq_disk = tape->disk;
- (void) ide_do_drive_cmd(drive, rq, ide_preempt);
+ ide_do_drive_cmd(drive, rq);
}
/*
@@ -698,7 +740,7 @@ static void idetape_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc,
* last packet command. We queue a request sense packet command in
* the head of the request list.
*/
-static ide_startstop_t idetape_retry_pc (ide_drive_t *drive)
+static void idetape_retry_pc(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
struct ide_atapi_pc *pc;
@@ -710,7 +752,6 @@ static ide_startstop_t idetape_retry_pc (ide_drive_t *drive)
idetape_create_request_sense_cmd(pc);
set_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags);
idetape_queue_pc_head(drive, pc, rq);
- return ide_stopped;
}
/*
@@ -727,7 +768,26 @@ static void idetape_postpone_request(ide_drive_t *drive)
ide_stall_queue(drive, tape->dsc_poll_freq);
}
-typedef void idetape_io_buf(ide_drive_t *, struct ide_atapi_pc *, unsigned int);
+static void ide_tape_handle_dsc(ide_drive_t *drive)
+{
+ idetape_tape_t *tape = drive->driver_data;
+
+ /* Media access command */
+ tape->dsc_polling_start = jiffies;
+ tape->dsc_poll_freq = IDETAPE_DSC_MA_FAST;
+ tape->dsc_timeout = jiffies + IDETAPE_DSC_MA_TIMEOUT;
+ /* Allow ide.c to handle other requests */
+ idetape_postpone_request(drive);
+}
+
+static void ide_tape_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
+ unsigned int bcount, int write)
+{
+ if (write)
+ idetape_output_buffers(drive, pc, bcount);
+ else
+ idetape_input_buffers(drive, pc, bcount);
+}
/*
* This is the usual interrupt handler which will be called during a packet
@@ -738,169 +798,11 @@ typedef void idetape_io_buf(ide_drive_t *, struct ide_atapi_pc *, unsigned int);
*/
static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
idetape_tape_t *tape = drive->driver_data;
- struct ide_atapi_pc *pc = tape->pc;
- xfer_func_t *xferfunc;
- idetape_io_buf *iobuf;
- unsigned int temp;
-#if SIMULATE_ERRORS
- static int error_sim_count;
-#endif
- u16 bcount;
- u8 stat, ireason;
-
- debug_log(DBG_PROCS, "Enter %s - interrupt handler\n", __func__);
-
- /* Clear the interrupt */
- stat = ide_read_status(drive);
-
- if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
- if (hwif->dma_ops->dma_end(drive) || (stat & ERR_STAT)) {
- /*
- * A DMA error is sometimes expected. For example,
- * if the tape is crossing a filemark during a
- * READ command, it will issue an irq and position
- * itself before the filemark, so that only a partial
- * data transfer will occur (which causes the DMA
- * error). In that case, we will later ask the tape
- * how much bytes of the original request were
- * actually transferred (we can't receive that
- * information from the DMA engine on most chipsets).
- */
-
- /*
- * On the contrary, a DMA error is never expected;
- * it usually indicates a hardware error or abort.
- * If the tape crosses a filemark during a READ
- * command, it will issue an irq and position itself
- * after the filemark (not before). Only a partial
- * data transfer will occur, but no DMA error.
- * (AS, 19 Apr 2001)
- */
- pc->flags |= PC_FLAG_DMA_ERROR;
- } else {
- pc->xferred = pc->req_xfer;
- idetape_update_buffers(pc);
- }
- debug_log(DBG_PROCS, "DMA finished\n");
-
- }
-
- /* No more interrupts */
- if ((stat & DRQ_STAT) == 0) {
- debug_log(DBG_SENSE, "Packet command completed, %d bytes"
- " transferred\n", pc->xferred);
-
- pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
- local_irq_enable();
-
-#if SIMULATE_ERRORS
- if ((pc->c[0] == WRITE_6 || pc->c[0] == READ_6) &&
- (++error_sim_count % 100) == 0) {
- printk(KERN_INFO "ide-tape: %s: simulating error\n",
- tape->name);
- stat |= ERR_STAT;
- }
-#endif
- if ((stat & ERR_STAT) && pc->c[0] == REQUEST_SENSE)
- stat &= ~ERR_STAT;
- if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) {
- /* Error detected */
- debug_log(DBG_ERR, "%s: I/O error\n", tape->name);
-
- if (pc->c[0] == REQUEST_SENSE) {
- printk(KERN_ERR "ide-tape: I/O error in request"
- " sense command\n");
- return ide_do_reset(drive);
- }
- debug_log(DBG_ERR, "[cmd %x]: check condition\n",
- pc->c[0]);
-
- /* Retry operation */
- return idetape_retry_pc(drive);
- }
- pc->error = 0;
- if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) &&
- (stat & SEEK_STAT) == 0) {
- /* Media access command */
- tape->dsc_polling_start = jiffies;
- tape->dsc_poll_freq = IDETAPE_DSC_MA_FAST;
- tape->dsc_timeout = jiffies + IDETAPE_DSC_MA_TIMEOUT;
- /* Allow ide.c to handle other requests */
- idetape_postpone_request(drive);
- return ide_stopped;
- }
- if (tape->failed_pc == pc)
- tape->failed_pc = NULL;
- /* Command finished - Call the callback function */
- return pc->idetape_callback(drive);
- }
-
- if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
- pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
- printk(KERN_ERR "ide-tape: The tape wants to issue more "
- "interrupts in DMA mode\n");
- printk(KERN_ERR "ide-tape: DMA disabled, reverting to PIO\n");
- ide_dma_off(drive);
- return ide_do_reset(drive);
- }
- /* Get the number of bytes to transfer on this interrupt. */
- bcount = (hwif->INB(hwif->io_ports.lbah_addr) << 8) |
- hwif->INB(hwif->io_ports.lbam_addr);
-
- ireason = hwif->INB(hwif->io_ports.nsect_addr);
-
- if (ireason & CD) {
- printk(KERN_ERR "ide-tape: CoD != 0 in %s\n", __func__);
- return ide_do_reset(drive);
- }
- if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) {
- /* Hopefully, we will never get here */
- printk(KERN_ERR "ide-tape: We wanted to %s, ",
- (ireason & IO) ? "Write" : "Read");
- printk(KERN_ERR "ide-tape: but the tape wants us to %s !\n",
- (ireason & IO) ? "Read" : "Write");
- return ide_do_reset(drive);
- }
- if (!(pc->flags & PC_FLAG_WRITING)) {
- /* Reading - Check that we have enough space */
- temp = pc->xferred + bcount;
- if (temp > pc->req_xfer) {
- if (temp > pc->buf_size) {
- printk(KERN_ERR "ide-tape: The tape wants to "
- "send us more data than expected "
- "- discarding data\n");
- ide_pad_transfer(drive, 0, bcount);
- ide_set_handler(drive, &idetape_pc_intr,
- IDETAPE_WAIT_CMD, NULL);
- return ide_started;
- }
- debug_log(DBG_SENSE, "The tape wants to send us more "
- "data than expected - allowing transfer\n");
- }
- iobuf = &idetape_input_buffers;
- xferfunc = hwif->input_data;
- } else {
- iobuf = &idetape_output_buffers;
- xferfunc = hwif->output_data;
- }
-
- if (pc->bh)
- iobuf(drive, pc, bcount);
- else
- xferfunc(drive, NULL, pc->cur_pos, bcount);
-
- /* Update the current position */
- pc->xferred += bcount;
- pc->cur_pos += bcount;
-
- debug_log(DBG_SENSE, "[cmd %x] transferred %d bytes on that intr.\n",
- pc->c[0], bcount);
- /* And set the interrupt handler again */
- ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL);
- return ide_started;
+ return ide_pc_intr(drive, tape->pc, idetape_pc_intr, IDETAPE_WAIT_CMD,
+ NULL, idetape_update_buffers, idetape_retry_pc,
+ ide_tape_handle_dsc, ide_tape_io_buffers);
}
/*
@@ -941,56 +843,16 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
*/
static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
idetape_tape_t *tape = drive->driver_data;
- struct ide_atapi_pc *pc = tape->pc;
- int retries = 100;
- ide_startstop_t startstop;
- u8 ireason;
-
- if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
- printk(KERN_ERR "ide-tape: Strange, packet command initiated "
- "yet DRQ isn't asserted\n");
- return startstop;
- }
- ireason = hwif->INB(hwif->io_ports.nsect_addr);
- while (retries-- && ((ireason & CD) == 0 || (ireason & IO))) {
- printk(KERN_ERR "ide-tape: (IO,CoD != (0,1) while issuing "
- "a packet command, retrying\n");
- udelay(100);
- ireason = hwif->INB(hwif->io_ports.nsect_addr);
- if (retries == 0) {
- printk(KERN_ERR "ide-tape: (IO,CoD != (0,1) while "
- "issuing a packet command, ignoring\n");
- ireason |= CD;
- ireason &= ~IO;
- }
- }
- if ((ireason & CD) == 0 || (ireason & IO)) {
- printk(KERN_ERR "ide-tape: (IO,CoD) != (0,1) while issuing "
- "a packet command\n");
- return ide_do_reset(drive);
- }
- /* Set the interrupt routine */
- ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL);
-#ifdef CONFIG_BLK_DEV_IDEDMA
- /* Begin DMA, if necessary */
- if (pc->flags & PC_FLAG_DMA_IN_PROGRESS)
- hwif->dma_ops->dma_start(drive);
-#endif
- /* Send the actual packet */
- hwif->output_data(drive, NULL, pc->c, 12);
- return ide_started;
+ return ide_transfer_pc(drive, tape->pc, idetape_pc_intr,
+ IDETAPE_WAIT_CMD, NULL);
}
static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
struct ide_atapi_pc *pc)
{
- ide_hwif_t *hwif = drive->hwif;
idetape_tape_t *tape = drive->driver_data;
- int dma_ok = 0;
- u16 bcount;
if (tape->pc->c[0] == REQUEST_SENSE &&
pc->c[0] == REQUEST_SENSE) {
@@ -1025,50 +887,15 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
pc->error = IDETAPE_ERROR_GENERAL;
}
tape->failed_pc = NULL;
- return pc->idetape_callback(drive);
+ pc->callback(drive);
+ return ide_stopped;
}
debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]);
pc->retries++;
- /* We haven't transferred any data yet */
- pc->xferred = 0;
- pc->cur_pos = pc->buf;
- /* Request to transfer the entire buffer at once */
- bcount = pc->req_xfer;
- if (pc->flags & PC_FLAG_DMA_ERROR) {
- pc->flags &= ~PC_FLAG_DMA_ERROR;
- printk(KERN_WARNING "ide-tape: DMA disabled, "
- "reverting to PIO\n");
- ide_dma_off(drive);
- }
- if ((pc->flags & PC_FLAG_DMA_RECOMMENDED) && drive->using_dma)
- dma_ok = !hwif->dma_ops->dma_setup(drive);
-
- ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK |
- IDE_TFLAG_OUT_DEVICE, bcount, dma_ok);
-
- if (dma_ok)
- /* Will begin DMA later */
- pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
- if (test_bit(IDETAPE_FLAG_DRQ_INTERRUPT, &tape->flags)) {
- ide_execute_command(drive, WIN_PACKETCMD, &idetape_transfer_pc,
- IDETAPE_WAIT_CMD, NULL);
- return ide_started;
- } else {
- ide_execute_pkt_cmd(drive);
- return idetape_transfer_pc(drive);
- }
-}
-
-static ide_startstop_t idetape_pc_callback(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- debug_log(DBG_PROCS, "Enter %s\n", __func__);
-
- idetape_end_request(drive, tape->pc->error ? 0 : 1, 0);
- return ide_stopped;
+ return ide_issue_pc(drive, pc, idetape_transfer_pc,
+ IDETAPE_WAIT_CMD, NULL);
}
/* A mode sense command is used to "sense" tape parameters. */
@@ -1096,7 +923,6 @@ static void idetape_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code)
pc->req_xfer = 24;
else
pc->req_xfer = 50;
- pc->idetape_callback = &idetape_pc_callback;
}
static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive)
@@ -1114,80 +940,41 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive)
printk(KERN_ERR "ide-tape: %s: I/O error, ",
tape->name);
/* Retry operation */
- return idetape_retry_pc(drive);
+ idetape_retry_pc(drive);
+ return ide_stopped;
}
pc->error = 0;
- if (tape->failed_pc == pc)
- tape->failed_pc = NULL;
} else {
pc->error = IDETAPE_ERROR_GENERAL;
tape->failed_pc = NULL;
}
- return pc->idetape_callback(drive);
-}
-
-static ide_startstop_t idetape_rw_callback(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
- struct request *rq = HWGROUP(drive)->rq;
- int blocks = tape->pc->xferred / tape->blk_size;
-
- tape->avg_size += blocks * tape->blk_size;
-
- if (time_after_eq(jiffies, tape->avg_time + HZ)) {
- tape->avg_speed = tape->avg_size * HZ /
- (jiffies - tape->avg_time) / 1024;
- tape->avg_size = 0;
- tape->avg_time = jiffies;
- }
- debug_log(DBG_PROCS, "Enter %s\n", __func__);
-
- tape->first_frame += blocks;
- rq->current_nr_sectors -= blocks;
-
- if (!tape->pc->error)
- idetape_end_request(drive, 1, 0);
- else
- idetape_end_request(drive, tape->pc->error, 0);
+ pc->callback(drive);
return ide_stopped;
}
-static void idetape_create_read_cmd(idetape_tape_t *tape,
- struct ide_atapi_pc *pc,
- unsigned int length, struct idetape_bh *bh)
+static void ide_tape_create_rw_cmd(idetape_tape_t *tape,
+ struct ide_atapi_pc *pc, unsigned int length,
+ struct idetape_bh *bh, u8 opcode)
{
idetape_init_pc(pc);
- pc->c[0] = READ_6;
put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
pc->c[1] = 1;
- pc->idetape_callback = &idetape_rw_callback;
pc->bh = bh;
- atomic_set(&bh->b_count, 0);
pc->buf = NULL;
pc->buf_size = length * tape->blk_size;
pc->req_xfer = pc->buf_size;
if (pc->req_xfer == tape->buffer_size)
- pc->flags |= PC_FLAG_DMA_RECOMMENDED;
-}
+ pc->flags |= PC_FLAG_DMA_OK;
-static void idetape_create_write_cmd(idetape_tape_t *tape,
- struct ide_atapi_pc *pc,
- unsigned int length, struct idetape_bh *bh)
-{
- idetape_init_pc(pc);
- pc->c[0] = WRITE_6;
- put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
- pc->c[1] = 1;
- pc->idetape_callback = &idetape_rw_callback;
- pc->flags |= PC_FLAG_WRITING;
- pc->bh = bh;
- pc->b_data = bh->b_data;
- pc->b_count = atomic_read(&bh->b_count);
- pc->buf = NULL;
- pc->buf_size = length * tape->blk_size;
- pc->req_xfer = pc->buf_size;
- if (pc->req_xfer == tape->buffer_size)
- pc->flags |= PC_FLAG_DMA_RECOMMENDED;
+ if (opcode == READ_6) {
+ pc->c[0] = READ_6;
+ atomic_set(&bh->b_count, 0);
+ } else if (opcode == WRITE_6) {
+ pc->c[0] = WRITE_6;
+ pc->flags |= PC_FLAG_WRITING;
+ pc->b_data = bh->b_data;
+ pc->b_count = atomic_read(&bh->b_count);
+ }
}
static ide_startstop_t idetape_do_request(ide_drive_t *drive,
@@ -1211,8 +998,10 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
}
/* Retry a failed packet command */
- if (tape->failed_pc && tape->pc->c[0] == REQUEST_SENSE)
- return idetape_issue_pc(drive, tape->failed_pc);
+ if (tape->failed_pc && tape->pc->c[0] == REQUEST_SENSE) {
+ pc = tape->failed_pc;
+ goto out;
+ }
if (postponed_rq != NULL)
if (rq != postponed_rq) {
@@ -1262,14 +1051,16 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
}
if (rq->cmd[0] & REQ_IDETAPE_READ) {
pc = idetape_next_pc_storage(drive);
- idetape_create_read_cmd(tape, pc, rq->current_nr_sectors,
- (struct idetape_bh *)rq->special);
+ ide_tape_create_rw_cmd(tape, pc, rq->current_nr_sectors,
+ (struct idetape_bh *)rq->special,
+ READ_6);
goto out;
}
if (rq->cmd[0] & REQ_IDETAPE_WRITE) {
pc = idetape_next_pc_storage(drive);
- idetape_create_write_cmd(tape, pc, rq->current_nr_sectors,
- (struct idetape_bh *)rq->special);
+ ide_tape_create_rw_cmd(tape, pc, rq->current_nr_sectors,
+ (struct idetape_bh *)rq->special,
+ WRITE_6);
goto out;
}
if (rq->cmd[0] & REQ_IDETAPE_PC1) {
@@ -1284,6 +1075,9 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
}
BUG();
out:
+ if (test_bit(IDETAPE_FLAG_DRQ_INTERRUPT, &tape->flags))
+ pc->flags |= PC_FLAG_DRQ_INTERRUPT;
+
return idetape_issue_pc(drive, pc);
}
@@ -1447,40 +1241,6 @@ static void idetape_init_merge_buffer(idetape_tape_t *tape)
}
}
-static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
- u8 *readpos = tape->pc->buf;
-
- debug_log(DBG_PROCS, "Enter %s\n", __func__);
-
- if (!tape->pc->error) {
- debug_log(DBG_SENSE, "BOP - %s\n",
- (readpos[0] & 0x80) ? "Yes" : "No");
- debug_log(DBG_SENSE, "EOP - %s\n",
- (readpos[0] & 0x40) ? "Yes" : "No");
-
- if (readpos[0] & 0x4) {
- printk(KERN_INFO "ide-tape: Block location is unknown"
- "to the tape\n");
- clear_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags);
- idetape_end_request(drive, 0, 0);
- } else {
- debug_log(DBG_SENSE, "Block Location - %u\n",
- be32_to_cpu(*(u32 *)&readpos[4]));
-
- tape->partition = readpos[1];
- tape->first_frame =
- be32_to_cpu(*(u32 *)&readpos[4]);
- set_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags);
- idetape_end_request(drive, 1, 0);
- }
- } else {
- idetape_end_request(drive, 0, 0);
- }
- return ide_stopped;
-}
-
/*
* Write a filemark if write_filemark=1. Flush the device buffers without
* writing a filemark otherwise.
@@ -1492,14 +1252,12 @@ static void idetape_create_write_filemark_cmd(ide_drive_t *drive,
pc->c[0] = WRITE_FILEMARKS;
pc->c[4] = write_filemark;
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
- pc->idetape_callback = &idetape_pc_callback;
}
static void idetape_create_test_unit_ready_cmd(struct ide_atapi_pc *pc)
{
idetape_init_pc(pc);
pc->c[0] = TEST_UNIT_READY;
- pc->idetape_callback = &idetape_pc_callback;
}
/*
@@ -1518,12 +1276,16 @@ static void idetape_create_test_unit_ready_cmd(struct ide_atapi_pc *pc)
static int idetape_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc)
{
struct ide_tape_obj *tape = drive->driver_data;
- struct request rq;
+ struct request *rq;
+ int error;
- idetape_init_rq(&rq, REQ_IDETAPE_PC1);
- rq.buffer = (char *) pc;
- rq.rq_disk = tape->disk;
- return ide_do_drive_cmd(drive, &rq, ide_wait);
+ rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
+ rq->cmd_type = REQ_TYPE_SPECIAL;
+ rq->cmd[0] = REQ_IDETAPE_PC1;
+ rq->buffer = (char *)pc;
+ error = blk_execute_rq(drive->queue, tape->disk, rq, 0);
+ blk_put_request(rq);
+ return error;
}
static void idetape_create_load_unload_cmd(ide_drive_t *drive,
@@ -1533,7 +1295,6 @@ static void idetape_create_load_unload_cmd(ide_drive_t *drive,
pc->c[0] = START_STOP;
pc->c[4] = cmd;
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
- pc->idetape_callback = &idetape_pc_callback;
}
static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout)
@@ -1585,7 +1346,6 @@ static void idetape_create_read_position_cmd(struct ide_atapi_pc *pc)
idetape_init_pc(pc);
pc->c[0] = READ_POSITION;
pc->req_xfer = 20;
- pc->idetape_callback = &idetape_read_position_callback;
}
static int idetape_read_position(ide_drive_t *drive)
@@ -1613,7 +1373,6 @@ static void idetape_create_locate_cmd(ide_drive_t *drive,
put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[3]);
pc->c[8] = partition;
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
- pc->idetape_callback = &idetape_pc_callback;
}
static int idetape_create_prevent_cmd(ide_drive_t *drive,
@@ -1628,7 +1387,6 @@ static int idetape_create_prevent_cmd(ide_drive_t *drive,
idetape_init_pc(pc);
pc->c[0] = ALLOW_MEDIUM_REMOVAL;
pc->c[4] = prevent;
- pc->idetape_callback = &idetape_pc_callback;
return 1;
}
@@ -1700,26 +1458,33 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks,
struct idetape_bh *bh)
{
idetape_tape_t *tape = drive->driver_data;
- struct request rq;
+ struct request *rq;
+ int ret, errors;
debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd);
- idetape_init_rq(&rq, cmd);
- rq.rq_disk = tape->disk;
- rq.special = (void *)bh;
- rq.sector = tape->first_frame;
- rq.nr_sectors = blocks;
- rq.current_nr_sectors = blocks;
- (void) ide_do_drive_cmd(drive, &rq, ide_wait);
+ rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
+ rq->cmd_type = REQ_TYPE_SPECIAL;
+ rq->cmd[0] = cmd;
+ rq->rq_disk = tape->disk;
+ rq->special = (void *)bh;
+ rq->sector = tape->first_frame;
+ rq->nr_sectors = blocks;
+ rq->current_nr_sectors = blocks;
+ blk_execute_rq(drive->queue, tape->disk, rq, 0);
+
+ errors = rq->errors;
+ ret = tape->blk_size * (blocks - rq->current_nr_sectors);
+ blk_put_request(rq);
if ((cmd & (REQ_IDETAPE_READ | REQ_IDETAPE_WRITE)) == 0)
return 0;
if (tape->merge_bh)
idetape_init_merge_buffer(tape);
- if (rq.errors == IDETAPE_ERROR_GENERAL)
+ if (errors == IDETAPE_ERROR_GENERAL)
return -EIO;
- return (tape->blk_size * (blocks-rq.current_nr_sectors));
+ return ret;
}
static void idetape_create_inquiry_cmd(struct ide_atapi_pc *pc)
@@ -1728,7 +1493,6 @@ static void idetape_create_inquiry_cmd(struct ide_atapi_pc *pc)
pc->c[0] = INQUIRY;
pc->c[4] = 254;
pc->req_xfer = 254;
- pc->idetape_callback = &idetape_pc_callback;
}
static void idetape_create_rewind_cmd(ide_drive_t *drive,
@@ -1737,7 +1501,6 @@ static void idetape_create_rewind_cmd(ide_drive_t *drive,
idetape_init_pc(pc);
pc->c[0] = REZERO_UNIT;
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
- pc->idetape_callback = &idetape_pc_callback;
}
static void idetape_create_erase_cmd(struct ide_atapi_pc *pc)
@@ -1746,7 +1509,6 @@ static void idetape_create_erase_cmd(struct ide_atapi_pc *pc)
pc->c[0] = ERASE;
pc->c[1] = 1;
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
- pc->idetape_callback = &idetape_pc_callback;
}
static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd)
@@ -1756,7 +1518,6 @@ static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd)
put_unaligned(cpu_to_be32(count), (unsigned int *) &pc->c[1]);
pc->c[1] = cmd;
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
- pc->idetape_callback = &idetape_pc_callback;
}
/* Queue up a character device originated write request. */
@@ -2746,9 +2507,8 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
* Ensure that the number we got makes sense; limit it within
* IDETAPE_DSC_RW_MIN and IDETAPE_DSC_RW_MAX.
*/
- tape->best_dsc_rw_freq = max_t(unsigned long,
- min_t(unsigned long, t, IDETAPE_DSC_RW_MAX),
- IDETAPE_DSC_RW_MIN);
+ tape->best_dsc_rw_freq = clamp_t(unsigned long, t, IDETAPE_DSC_RW_MIN,
+ IDETAPE_DSC_RW_MAX);
printk(KERN_INFO "ide-tape: %s <-> %s: %dKBps, %d*%dkB buffer, "
"%lums tDSC%s\n",
drive->name, tape->name, *(u16 *)&tape->caps[14],
@@ -2900,11 +2660,6 @@ static int ide_tape_probe(ide_drive_t *drive)
" the driver\n", drive->name);
goto failed;
}
- if (drive->scsi) {
- printk(KERN_INFO "ide-tape: passing drive %s to ide-scsi"
- " emulation.\n", drive->name);
- goto failed;
- }
tape = kzalloc(sizeof(idetape_tape_t), GFP_KERNEL);
if (tape == NULL) {
printk(KERN_ERR "ide-tape: %s: Can't allocate a tape struct\n",
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index ab545ff..cf55a48 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -109,13 +109,15 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task)
if ((task->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0) {
ide_tf_dump(drive->name, tf);
+ ide_set_irq(drive, 1);
+ SELECT_MASK(drive, 0);
hwif->tf_load(drive, task);
}
switch (task->data_phase) {
case TASKFILE_MULTI_OUT:
case TASKFILE_OUT:
- hwif->OUTBSYNC(drive, tf->command, hwif->io_ports.command_addr);
+ hwif->OUTBSYNC(hwif, tf->command, hwif->io_ports.command_addr);
ndelay(400); /* FIXME */
return pre_task_out_intr(drive, task->rq);
case TASKFILE_MULTI_IN:
@@ -492,11 +494,12 @@ static ide_startstop_t pre_task_out_intr(ide_drive_t *drive, struct request *rq)
int ide_raw_taskfile(ide_drive_t *drive, ide_task_t *task, u8 *buf, u16 nsect)
{
- struct request rq;
+ struct request *rq;
+ int error;
- blk_rq_init(NULL, &rq);
- rq.cmd_type = REQ_TYPE_ATA_TASKFILE;
- rq.buffer = buf;
+ rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
+ rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
+ rq->buffer = buf;
/*
* (ks) We transfer currently only whole sectors.
@@ -504,16 +507,19 @@ int ide_raw_taskfile(ide_drive_t *drive, ide_task_t *task, u8 *buf, u16 nsect)
* if we would find a solution to transfer any size.
* To support special commands like READ LONG.
*/
- rq.hard_nr_sectors = rq.nr_sectors = nsect;
- rq.hard_cur_sectors = rq.current_nr_sectors = nsect;
+ rq->hard_nr_sectors = rq->nr_sectors = nsect;
+ rq->hard_cur_sectors = rq->current_nr_sectors = nsect;
if (task->tf_flags & IDE_TFLAG_WRITE)
- rq.cmd_flags |= REQ_RW;
+ rq->cmd_flags |= REQ_RW;
- rq.special = task;
- task->rq = &rq;
+ rq->special = task;
+ task->rq = rq;
- return ide_do_drive_cmd(drive, &rq, ide_wait);
+ error = blk_execute_rq(drive->queue, NULL, rq, 0);
+ blk_put_request(rq);
+
+ return error;
}
EXPORT_SYMBOL(ide_raw_taskfile);
@@ -739,12 +745,14 @@ int ide_cmd_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg)
struct hd_driveid *id = drive->id;
if (NULL == (void *) arg) {
- struct request rq;
+ struct request *rq;
- ide_init_drive_cmd(&rq);
- rq.cmd_type = REQ_TYPE_ATA_TASKFILE;
+ rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
+ rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
+ err = blk_execute_rq(drive->queue, NULL, rq, 0);
+ blk_put_request(rq);
- return ide_do_drive_cmd(drive, &rq, ide_wait);
+ return err;
}
if (copy_from_user(args, (void __user *)arg, 4))
diff --git a/drivers/ide/ide-timing.h b/drivers/ide/ide-timing.h
index 3b12ffe..2e91c58 100644
--- a/drivers/ide/ide-timing.h
+++ b/drivers/ide/ide-timing.h
@@ -95,7 +95,6 @@ static struct ide_timing ide_timing[] = {
#define IDE_TIMING_UDMA 0x80
#define IDE_TIMING_ALL 0xff
-#define FIT(v,vmin,vmax) max_t(short,min_t(short,v,vmax),vmin)
#define ENOUGH(v,unit) (((v)-1)/(unit)+1)
#define EZ(v,unit) ((v)?ENOUGH(v,unit):0)
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 300431d..2b84535 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -86,13 +86,10 @@ static const u8 ide_hwif_to_major[] = { IDE0_MAJOR, IDE1_MAJOR,
IDE6_MAJOR, IDE7_MAJOR,
IDE8_MAJOR, IDE9_MAJOR };
-static int idebus_parameter; /* holds the "idebus=" parameter */
-static int system_bus_speed; /* holds what we think is VESA/PCI bus speed */
-
DEFINE_MUTEX(ide_cfg_mtx);
- __cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock);
-int noautodma = 0;
+__cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock);
+EXPORT_SYMBOL(ide_lock);
ide_hwif_t ide_hwifs[MAX_HWIFS]; /* master data repository */
@@ -139,7 +136,6 @@ static void ide_port_init_devices_data(ide_hwif_t *hwif)
drive->media = ide_disk;
drive->select.all = (unit<<4)|0xa0;
drive->hwif = hwif;
- drive->ctl = 0x08;
drive->ready_stat = READY_STAT;
drive->bad_wstat = BAD_W_STAT;
drive->special.b.recalibrate = 1;
@@ -154,32 +150,9 @@ static void ide_port_init_devices_data(ide_hwif_t *hwif)
}
}
-/*
- * init_ide_data() sets reasonable default values into all fields
- * of all instances of the hwifs and drives, but only on the first call.
- * Subsequent calls have no effect (they don't wipe out anything).
- *
- * This routine is normally called at driver initialization time,
- * but may also be called MUCH earlier during kernel "command-line"
- * parameter processing. As such, we cannot depend on any other parts
- * of the kernel (such as memory allocation) to be functioning yet.
- *
- * This is too bad, as otherwise we could dynamically allocate the
- * ide_drive_t structs as needed, rather than always consuming memory
- * for the max possible number (MAX_HWIFS * MAX_DRIVES) of them.
- *
- * FIXME: We should stuff the setup data into __init and copy the
- * relevant hwifs/allocate them properly during boot.
- */
-#define MAGIC_COOKIE 0x12345678
static void __init init_ide_data (void)
{
unsigned int index;
- static unsigned long magic_cookie = MAGIC_COOKIE;
-
- if (magic_cookie != MAGIC_COOKIE)
- return; /* already initialized */
- magic_cookie = 0;
/* Initialise all interface structures */
for (index = 0; index < MAX_HWIFS; ++index) {
@@ -189,38 +162,6 @@ static void __init init_ide_data (void)
}
}
-/**
- * ide_system_bus_speed - guess bus speed
- *
- * ide_system_bus_speed() returns what we think is the system VESA/PCI
- * bus speed (in MHz). This is used for calculating interface PIO timings.
- * The default is 40 for known PCI systems, 50 otherwise.
- * The "idebus=xx" parameter can be used to override this value.
- * The actual value to be used is computed/displayed the first time
- * through. Drivers should only use this as a last resort.
- *
- * Returns a guessed speed in MHz.
- */
-
-static int ide_system_bus_speed(void)
-{
-#ifdef CONFIG_PCI
- static struct pci_device_id pci_default[] = {
- { PCI_DEVICE(PCI_ANY_ID, PCI_ANY_ID) },
- { }
- };
-#else
-#define pci_default 0
-#endif /* CONFIG_PCI */
-
- /* user supplied value */
- if (idebus_parameter)
- return idebus_parameter;
-
- /* safe default value for PCI or VESA and PCI*/
- return pci_dev_present(pci_default) ? 33 : 50;
-}
-
void ide_remove_port_from_hwgroup(ide_hwif_t *hwif)
{
ide_hwgroup_t *hwgroup = hwif->hwgroup;
@@ -498,7 +439,7 @@ out:
int set_pio_mode(ide_drive_t *drive, int arg)
{
- struct request rq;
+ struct request *rq;
ide_hwif_t *hwif = drive->hwif;
const struct ide_port_ops *port_ops = hwif->port_ops;
@@ -512,12 +453,15 @@ int set_pio_mode(ide_drive_t *drive, int arg)
if (drive->special.b.set_tune)
return -EBUSY;
- ide_init_drive_cmd(&rq);
- rq.cmd_type = REQ_TYPE_ATA_TASKFILE;
+ rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
+ rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
drive->tune_req = (u8) arg;
drive->special.b.set_tune = 1;
- (void) ide_do_drive_cmd(drive, &rq, ide_wait);
+
+ blk_execute_rq(drive->queue, NULL, rq, 0);
+ blk_put_request(rq);
+
return 0;
}
@@ -537,25 +481,11 @@ static int set_unmaskirq(ide_drive_t *drive, int arg)
return 0;
}
-/**
- * system_bus_clock - clock guess
- *
- * External version of the bus clock guess used by very old IDE drivers
- * for things like VLB timings. Should not be used.
- */
-
-int system_bus_clock (void)
-{
- return system_bus_speed;
-}
-
-EXPORT_SYMBOL(system_bus_clock);
-
static int generic_ide_suspend(struct device *dev, pm_message_t mesg)
{
ide_drive_t *drive = dev->driver_data;
ide_hwif_t *hwif = HWIF(drive);
- struct request rq;
+ struct request *rq;
struct request_pm_state rqpm;
ide_task_t args;
int ret;
@@ -564,18 +494,19 @@ static int generic_ide_suspend(struct device *dev, pm_message_t mesg)
if (!(drive->dn % 2))
ide_acpi_get_timing(hwif);
- blk_rq_init(NULL, &rq);
memset(&rqpm, 0, sizeof(rqpm));
memset(&args, 0, sizeof(args));
- rq.cmd_type = REQ_TYPE_PM_SUSPEND;
- rq.special = &args;
- rq.data = &rqpm;
+ rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
+ rq->cmd_type = REQ_TYPE_PM_SUSPEND;
+ rq->special = &args;
+ rq->data = &rqpm;
rqpm.pm_step = ide_pm_state_start_suspend;
if (mesg.event == PM_EVENT_PRETHAW)
mesg.event = PM_EVENT_FREEZE;
rqpm.pm_state = mesg.event;
- ret = ide_do_drive_cmd(drive, &rq, ide_wait);
+ ret = blk_execute_rq(drive->queue, NULL, rq, 0);
+ blk_put_request(rq);
/* only call ACPI _PS3 after both drivers are suspended */
if (!ret && (((drive->dn % 2) && hwif->drives[0].present
&& hwif->drives[1].present)
@@ -589,7 +520,7 @@ static int generic_ide_resume(struct device *dev)
{
ide_drive_t *drive = dev->driver_data;
ide_hwif_t *hwif = HWIF(drive);
- struct request rq;
+ struct request *rq;
struct request_pm_state rqpm;
ide_task_t args;
int err;
@@ -602,16 +533,18 @@ static int generic_ide_resume(struct device *dev)
ide_acpi_exec_tfs(drive);
- blk_rq_init(NULL, &rq);
memset(&rqpm, 0, sizeof(rqpm));
memset(&args, 0, sizeof(args));
- rq.cmd_type = REQ_TYPE_PM_RESUME;
- rq.special = &args;
- rq.data = &rqpm;
+ rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
+ rq->cmd_type = REQ_TYPE_PM_RESUME;
+ rq->cmd_flags |= REQ_PREEMPT;
+ rq->special = &args;
+ rq->data = &rqpm;
rqpm.pm_step = ide_pm_state_start_resume;
rqpm.pm_state = PM_EVENT_ON;
- err = ide_do_drive_cmd(drive, &rq, ide_head_wait);
+ err = blk_execute_rq(drive->queue, NULL, rq, 1);
+ blk_put_request(rq);
if (err == 0 && dev->driver) {
ide_driver_t *drv = to_ide_driver(dev->driver);
@@ -764,212 +697,6 @@ set_val:
EXPORT_SYMBOL(generic_ide_ioctl);
-/*
- * stridx() returns the offset of c within s,
- * or -1 if c is '\0' or not found within s.
- */
-static int __init stridx (const char *s, char c)
-{
- char *i = strchr(s, c);
- return (i && c) ? i - s : -1;
-}
-
-/*
- * match_parm() does parsing for ide_setup():
- *
- * 1. the first char of s must be '='.
- * 2. if the remainder matches one of the supplied keywords,
- * the index (1 based) of the keyword is negated and returned.
- * 3. if the remainder is a series of no more than max_vals numbers
- * separated by commas, the numbers are saved in vals[] and a
- * count of how many were saved is returned. Base10 is assumed,
- * and base16 is allowed when prefixed with "0x".
- * 4. otherwise, zero is returned.
- */
-static int __init match_parm (char *s, const char *keywords[], int vals[], int max_vals)
-{
- static const char *decimal = "0123456789";
- static const char *hex = "0123456789abcdef";
- int i, n;
-
- if (*s++ == '=') {
- /*
- * Try matching against the supplied keywords,
- * and return -(index+1) if we match one
- */
- if (keywords != NULL) {
- for (i = 0; *keywords != NULL; ++i) {
- if (!strcmp(s, *keywords++))
- return -(i+1);
- }
- }
- /*
- * Look for a series of no more than "max_vals"
- * numeric values separated by commas, in base10,
- * or base16 when prefixed with "0x".
- * Return a count of how many were found.
- */
- for (n = 0; (i = stridx(decimal, *s)) >= 0;) {
- vals[n] = i;
- while ((i = stridx(decimal, *++s)) >= 0)
- vals[n] = (vals[n] * 10) + i;
- if (*s == 'x' && !vals[n]) {
- while ((i = stridx(hex, *++s)) >= 0)
- vals[n] = (vals[n] * 0x10) + i;
- }
- if (++n == max_vals)
- break;
- if (*s == ',' || *s == ';')
- ++s;
- }
- if (!*s)
- return n;
- }
- return 0; /* zero = nothing matched */
-}
-
-/*
- * ide_setup() gets called VERY EARLY during initialization,
- * to handle kernel "command line" strings beginning with "hdx=" or "ide".
- *
- * Remember to update Documentation/ide/ide.txt if you change something here.
- */
-static int __init ide_setup(char *s)
-{
- ide_hwif_t *hwif;
- ide_drive_t *drive;
- unsigned int hw, unit;
- int vals[3];
- const char max_drive = 'a' + ((MAX_HWIFS * MAX_DRIVES) - 1);
-
- if (strncmp(s,"hd",2) == 0 && s[2] == '=') /* hd= is for hd.c */
- return 0; /* driver and not us */
-
- if (strncmp(s,"ide",3) && strncmp(s,"idebus",6) && strncmp(s,"hd",2))
- return 0;
-
- printk(KERN_INFO "ide_setup: %s", s);
- init_ide_data ();
-
-#ifdef CONFIG_BLK_DEV_IDEDOUBLER
- if (!strcmp(s, "ide=doubler")) {
- extern int ide_doubler;
-
- printk(" : Enabled support for IDE doublers\n");
- ide_doubler = 1;
- goto obsolete_option;
- }
-#endif /* CONFIG_BLK_DEV_IDEDOUBLER */
-
- if (!strcmp(s, "ide=nodma")) {
- printk(" : Prevented DMA\n");
- noautodma = 1;
- goto obsolete_option;
- }
-
-#ifdef CONFIG_BLK_DEV_IDEACPI
- if (!strcmp(s, "ide=noacpi")) {
- //printk(" : Disable IDE ACPI support.\n");
- ide_noacpi = 1;
- goto obsolete_option;
- }
- if (!strcmp(s, "ide=acpigtf")) {
- //printk(" : Enable IDE ACPI _GTF support.\n");
- ide_acpigtf = 1;
- goto obsolete_option;
- }
- if (!strcmp(s, "ide=acpionboot")) {
- //printk(" : Call IDE ACPI methods on boot.\n");
- ide_acpionboot = 1;
- goto obsolete_option;
- }
-#endif /* CONFIG_BLK_DEV_IDEACPI */
-
- /*
- * Look for drive options: "hdx="
- */
- if (s[0] == 'h' && s[1] == 'd' && s[2] >= 'a' && s[2] <= max_drive) {
- const char *hd_words[] = {
- "none", "noprobe", "nowerr", "cdrom", "nodma",
- "-6", "-7", "-8", "-9", "-10",
- "noflush", "remap", "remap63", "scsi", NULL };
- unit = s[2] - 'a';
- hw = unit / MAX_DRIVES;
- unit = unit % MAX_DRIVES;
- hwif = &ide_hwifs[hw];
- drive = &hwif->drives[unit];
- if (strncmp(s + 4, "ide-", 4) == 0) {
- strlcpy(drive->driver_req, s + 4, sizeof(drive->driver_req));
- goto obsolete_option;
- }
- switch (match_parm(&s[3], hd_words, vals, 3)) {
- case -1: /* "none" */
- case -2: /* "noprobe" */
- drive->noprobe = 1;
- goto obsolete_option;
- case -3: /* "nowerr" */
- drive->bad_wstat = BAD_R_STAT;
- goto obsolete_option;
- case -4: /* "cdrom" */
- drive->present = 1;
- drive->media = ide_cdrom;
- /* an ATAPI device ignores DRDY */
- drive->ready_stat = 0;
- goto obsolete_option;
- case -5: /* nodma */
- drive->nodma = 1;
- goto obsolete_option;
- case -11: /* noflush */
- drive->noflush = 1;
- goto obsolete_option;
- case -12: /* "remap" */
- drive->remap_0_to_1 = 1;
- goto obsolete_option;
- case -13: /* "remap63" */
- drive->sect0 = 63;
- goto obsolete_option;
- case -14: /* "scsi" */
- drive->scsi = 1;
- goto obsolete_option;
- case 3: /* cyl,head,sect */
- drive->media = ide_disk;
- drive->ready_stat = READY_STAT;
- drive->cyl = drive->bios_cyl = vals[0];
- drive->head = drive->bios_head = vals[1];
- drive->sect = drive->bios_sect = vals[2];
- drive->present = 1;
- drive->forced_geom = 1;
- goto obsolete_option;
- default:
- goto bad_option;
- }
- }
-
- if (s[0] != 'i' || s[1] != 'd' || s[2] != 'e')
- goto bad_option;
- /*
- * Look for bus speed option: "idebus="
- */
- if (s[3] == 'b' && s[4] == 'u' && s[5] == 's') {
- if (match_parm(&s[6], NULL, vals, 1) != 1)
- goto bad_option;
- if (vals[0] >= 20 && vals[0] <= 66) {
- idebus_parameter = vals[0];
- } else
- printk(" -- BAD BUS SPEED! Expected value from 20 to 66");
- goto obsolete_option;
- }
-
-bad_option:
- printk(" -- BAD OPTION\n");
- return 1;
-obsolete_option:
- printk(" -- OBSOLETE OPTION, WILL BE REMOVED SOON!\n");
- return 1;
-}
-
-EXPORT_SYMBOL(ide_lock);
-
static int ide_bus_match(struct device *dev, struct device_driver *drv)
{
return 1;
@@ -1281,11 +1008,6 @@ static int __init ide_init(void)
int ret;
printk(KERN_INFO "Uniform Multi-Platform E-IDE driver\n");
- system_bus_speed = ide_system_bus_speed();
-
- printk(KERN_INFO "ide: Assuming %dMHz system bus speed "
- "for PIO modes%s\n", system_bus_speed,
- idebus_parameter ? "" : "; override with idebus=xx");
ret = bus_register(&ide_bus_type);
if (ret < 0) {
@@ -1311,32 +1033,7 @@ out_port_class:
return ret;
}
-#ifdef MODULE
-static char *options = NULL;
-module_param(options, charp, 0);
-MODULE_LICENSE("GPL");
-
-static void __init parse_options (char *line)
-{
- char *next = line;
-
- if (line == NULL || !*line)
- return;
- while ((line = next) != NULL) {
- if ((next = strchr(line,' ')) != NULL)
- *next++ = 0;
- if (!ide_setup(line))
- printk (KERN_INFO "Unknown option '%s'\n", line);
- }
-}
-
-int __init init_module (void)
-{
- parse_options(options);
- return ide_init();
-}
-
-void __exit cleanup_module (void)
+static void __exit ide_exit(void)
{
proc_ide_destroy();
@@ -1345,10 +1042,7 @@ void __exit cleanup_module (void)
bus_unregister(&ide_bus_type);
}
-#else /* !MODULE */
-
-__setup("", ide_setup);
-
module_init(ide_init);
+module_exit(ide_exit);
-#endif /* MODULE */
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c
index 90c65cf..052125f 100644
--- a/drivers/ide/legacy/ali14xx.c
+++ b/drivers/ide/legacy/ali14xx.c
@@ -116,7 +116,7 @@ static void ali14xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
int time1, time2;
u8 param1, param2, param3, param4;
unsigned long flags;
- int bus_speed = ide_vlb_clk ? ide_vlb_clk : system_bus_clock();
+ int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50;
/* calculate timing, according to PIO mode */
time1 = ide_pio_cycle_time(drive, pio);
diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c
index fed7d81..b789416 100644
--- a/drivers/ide/legacy/gayle.c
+++ b/drivers/ide/legacy/gayle.c
@@ -64,9 +64,7 @@
#define GAYLE_HAS_CONTROL_REG (!ide_doubler)
#define GAYLE_IDEREG_SIZE (ide_doubler ? 0x1000 : 0x2000)
-int ide_doubler = 0; /* support IDE doublers? */
-EXPORT_SYMBOL_GPL(ide_doubler);
-
+static int ide_doubler;
module_param_named(doubler, ide_doubler, bool, 0);
MODULE_PARM_DESC(doubler, "enable support for IDE doublers");
#endif /* CONFIG_BLK_DEV_IDEDOUBLER */
diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c
index 4fe516d..dd6dfb3 100644
--- a/drivers/ide/legacy/ht6560b.c
+++ b/drivers/ide/legacy/ht6560b.c
@@ -212,7 +212,7 @@ static u8 ht_pio2timings(ide_drive_t *drive, const u8 pio)
{
int active_time, recovery_time;
int active_cycles, recovery_cycles;
- int bus_speed = ide_vlb_clk ? ide_vlb_clk : system_bus_clock();
+ int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50;
if (pio) {
unsigned int cycle_time;
diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c
index 6424af1..51dba82 100644
--- a/drivers/ide/legacy/qd65xx.c
+++ b/drivers/ide/legacy/qd65xx.c
@@ -110,7 +110,7 @@ static void qd65xx_select(ide_drive_t *drive)
static u8 qd6500_compute_timing (ide_hwif_t *hwif, int active_time, int recovery_time)
{
- int clk = ide_vlb_clk ? ide_vlb_clk : system_bus_clock();
+ int clk = ide_vlb_clk ? ide_vlb_clk : 50;
u8 act_cyc, rec_cyc;
if (clk <= 33) {
@@ -132,7 +132,7 @@ static u8 qd6500_compute_timing (ide_hwif_t *hwif, int active_time, int recovery
static u8 qd6580_compute_timing (int active_time, int recovery_time)
{
- int clk = ide_vlb_clk ? ide_vlb_clk : system_bus_clock();
+ int clk = ide_vlb_clk ? ide_vlb_clk : 50;
u8 act_cyc, rec_cyc;
act_cyc = 17 - IDE_IN(active_time * clk / 1000 + 1, 2, 17);
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index 7f46c22..ae7a432 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -140,7 +140,7 @@ static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio)
static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const char *name)
{
- int bus_speed = ide_pci_clk ? ide_pci_clk : system_bus_clock();
+ int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
if (bus_speed <= 33)
pci_set_drvdata(dev, (void *) aec6xxx_33_base);
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index f2129d5..f2de00a 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -72,7 +72,7 @@ static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio)
int s_time, a_time, c_time;
u8 s_clc, a_clc, r_clc;
unsigned long flags;
- int bus_speed = ide_pci_clk ? ide_pci_clk : system_bus_clock();
+ int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
int port = hwif->channel ? 0x5c : 0x58;
int portFIFO = hwif->channel ? 0x55 : 0x54;
u8 cd_dma_fifo = 0;
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index efcf543..ad22220 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -53,20 +53,20 @@ static void amd_set_speed(struct pci_dev *dev, u8 dn, u8 udma_mask,
u8 t = 0, offset = amd_offset(dev);
pci_read_config_byte(dev, AMD_ADDRESS_SETUP + offset, &t);
- t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
+ t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
pci_write_config_byte(dev, AMD_ADDRESS_SETUP + offset, t);
pci_write_config_byte(dev, AMD_8BIT_TIMING + offset + (1 - (dn >> 1)),
- ((FIT(timing->act8b, 1, 16) - 1) << 4) | (FIT(timing->rec8b, 1, 16) - 1));
+ ((clamp_val(timing->act8b, 1, 16) - 1) << 4) | (clamp_val(timing->rec8b, 1, 16) - 1));
pci_write_config_byte(dev, AMD_DRIVE_TIMING + offset + (3 - dn),
- ((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1));
+ ((clamp_val(timing->active, 1, 16) - 1) << 4) | (clamp_val(timing->recover, 1, 16) - 1));
switch (udma_mask) {
- case ATA_UDMA2: t = timing->udma ? (0xc0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break;
- case ATA_UDMA4: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 2, 10)]) : 0x03; break;
- case ATA_UDMA5: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 10)]) : 0x03; break;
- case ATA_UDMA6: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 15)]) : 0x03; break;
+ case ATA_UDMA2: t = timing->udma ? (0xc0 | (clamp_val(timing->udma, 2, 5) - 2)) : 0x03; break;
+ case ATA_UDMA4: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 2, 10)]) : 0x03; break;
+ case ATA_UDMA5: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 1, 10)]) : 0x03; break;
+ case ATA_UDMA6: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 1, 15)]) : 0x03; break;
default: return;
}
@@ -179,7 +179,7 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev,
* Determine the system bus clock.
*/
- amd_clock = (ide_pci_clk ? ide_pci_clk : system_bus_clock()) * 1000;
+ amd_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000;
switch (amd_clock) {
case 33000: amd_clock = 33333; break;
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index b38a198..cd1ba14 100644
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -525,12 +525,10 @@ static void cmd640_set_mode(ide_drive_t *drive, unsigned int index,
u8 setup_count, active_count, recovery_count, recovery_count2, cycle_count;
int bus_speed;
- if (cmd640_vlb && ide_vlb_clk)
- bus_speed = ide_vlb_clk;
- else if (!cmd640_vlb && ide_pci_clk)
- bus_speed = ide_pci_clk;
+ if (cmd640_vlb)
+ bus_speed = ide_vlb_clk ? ide_vlb_clk : 50;
else
- bus_speed = system_bus_clock();
+ bus_speed = ide_pci_clk ? ide_pci_clk : 33;
if (pio_mode > 5)
pio_mode = 5;
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index 0867471..ca4774a 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -69,7 +69,7 @@ static u8 quantize_timing(int timing, int quant)
static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_time)
{
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- int clock_time = 1000 / (ide_pci_clk ? ide_pci_clk : system_bus_clock());
+ int clock_time = 1000 / (ide_pci_clk ? ide_pci_clk : 33);
u8 cycle_count, active_count, recovery_count, drwtim;
static const u8 recovery_values[] =
{15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0};
@@ -128,7 +128,7 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio)
ide_pio_timings[pio].active_time);
setup_count = quantize_timing(ide_pio_timings[pio].setup_time,
- 1000 / (ide_pci_clk ? ide_pci_clk : system_bus_clock()));
+ 1000 / (ide_pci_clk ? ide_pci_clk : 33));
/*
* The primary channel has individual address setup timing registers
diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c
index 77cc22c..8c534af 100644
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -134,7 +134,7 @@ static int calc_clk(int time, int bus_speed)
static void compute_clocks(u8 pio, pio_clocks_t *p_pclk)
{
int clk1, clk2;
- int bus_speed = ide_pci_clk ? ide_pci_clk : system_bus_clock();
+ int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
/* we don't check against CY82C693's min and max speed,
* so you can play with the idebus=xx parameter
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index c929dad..397c6cb 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -759,8 +759,7 @@ static void hpt3xx_maskproc(ide_drive_t *drive, int mask)
enable_irq (hwif->irq);
}
} else
- outb(mask ? (drive->ctl | 2) : (drive->ctl & ~2),
- hwif->io_ports.ctl_addr);
+ outb(ATA_DEVCTL_OBS | (mask ? 2 : 0), hwif->io_ports.ctl_addr);
}
/*
diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c
index a7a41bb..45ba71a 100644
--- a/drivers/ide/pci/ns87415.c
+++ b/drivers/ide/pci/ns87415.c
@@ -76,7 +76,7 @@ static void superio_tf_read(ide_drive_t *drive, ide_task_t *task)
}
/* be sure we're looking at the low order bits */
- outb(drive->ctl & ~0x80, io_ports->ctl_addr);
+ outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr);
if (task->tf_flags & IDE_TFLAG_IN_NSECT)
tf->nsect = inb(io_ports->nsect_addr);
@@ -90,7 +90,7 @@ static void superio_tf_read(ide_drive_t *drive, ide_task_t *task)
tf->device = superio_ide_inb(io_ports->device_addr);
if (task->tf_flags & IDE_TFLAG_LBA48) {
- outb(drive->ctl | 0x80, io_ports->ctl_addr);
+ outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr);
if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
tf->hob_feature = inb(io_ports->feature_addr);
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index 910fb00..1584ebb 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -148,11 +148,8 @@ static void scc_ide_outb(u8 addr, unsigned long port)
out_be32((void*)port, addr);
}
-static void
-scc_ide_outbsync(ide_drive_t * drive, u8 addr, unsigned long port)
+static void scc_ide_outbsync(ide_hwif_t *hwif, u8 addr, unsigned long port)
{
- ide_hwif_t *hwif = HWIF(drive);
-
out_be32((void*)port, addr);
eieio();
in_be32((void*)(hwif->dma_base + 0x01c));
@@ -662,8 +659,6 @@ static void scc_tf_load(ide_drive_t *drive, ide_task_t *task)
if (task->tf_flags & IDE_TFLAG_FLAGGED)
HIHI = 0xFF;
- ide_set_irq(drive, 1);
-
if (task->tf_flags & IDE_TFLAG_OUT_DATA)
out_be32((void *)io_ports->data_addr,
(tf->hob_data << 8) | tf->data);
@@ -708,7 +703,7 @@ static void scc_tf_read(ide_drive_t *drive, ide_task_t *task)
}
/* be sure we're looking at the low order bits */
- scc_ide_outb(drive->ctl & ~0x80, io_ports->ctl_addr);
+ scc_ide_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr);
if (task->tf_flags & IDE_TFLAG_IN_NSECT)
tf->nsect = scc_ide_inb(io_ports->nsect_addr);
@@ -722,7 +717,7 @@ static void scc_tf_read(ide_drive_t *drive, ide_task_t *task)
tf->device = scc_ide_inb(io_ports->device_addr);
if (task->tf_flags & IDE_TFLAG_LBA48) {
- scc_ide_outb(drive->ctl | 0x80, io_ports->ctl_addr);
+ scc_ide_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr);
if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
tf->hob_feature = scc_ide_inb(io_ports->feature_addr);
@@ -795,7 +790,6 @@ static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
hwif->dma_base = dma_base;
hwif->config_data = ports->ctl;
- hwif->mmio = 1;
}
/**
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index 16a0bce..24513e3 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -111,7 +111,7 @@ sgiioc4_init_hwif_ports(hw_regs_t * hw, unsigned long data_port,
static void
sgiioc4_maskproc(ide_drive_t * drive, int mask)
{
- writeb(mask ? (drive->ctl | 2) : (drive->ctl & ~2),
+ writeb(ATA_DEVCTL_OBS | (mask ? 2 : 0),
(void __iomem *)drive->hwif->io_ports.ctl_addr);
}
@@ -369,8 +369,7 @@ ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d)
hwif->sg_max_nents = IOC4_PRD_ENTRIES;
pad = pci_alloc_consistent(dev, IOC4_IDE_CACHELINE_SIZE,
- (dma_addr_t *) &(hwif->dma_status));
-
+ (dma_addr_t *)&hwif->extra_base);
if (pad) {
ide_set_hwifdata(hwif, pad);
return 0;
@@ -439,7 +438,7 @@ sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive)
/* Address of the Ending DMA */
memset(ide_get_hwifdata(hwif), 0, IOC4_IDE_CACHELINE_SIZE);
- ending_dma_addr = cpu_to_le32(hwif->dma_status);
+ ending_dma_addr = cpu_to_le32(hwif->extra_base);
writel(ending_dma_addr, (void __iomem *)(dma_base + IOC4_DMA_END_ADDR * 4));
writel(dma_direction, (void __iomem *)ioc4_dma_addr);
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 0006b9e..b75e9bb 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -94,7 +94,7 @@ static unsigned long siimage_selreg(ide_hwif_t *hwif, int r)
unsigned long base = (unsigned long)hwif->hwif_data;
base += 0xA0 + r;
- if (hwif->mmio)
+ if (hwif->host_flags & IDE_HFLAG_MMIO)
base += hwif->channel << 6;
else
base += hwif->channel << 4;
@@ -117,7 +117,7 @@ static inline unsigned long siimage_seldev(ide_drive_t *drive, int r)
unsigned long base = (unsigned long)hwif->hwif_data;
base += 0xA0 + r;
- if (hwif->mmio)
+ if (hwif->host_flags & IDE_HFLAG_MMIO)
base += hwif->channel << 6;
else
base += hwif->channel << 4;
@@ -190,7 +190,9 @@ static u8 sil_pata_udma_filter(ide_drive_t *drive)
unsigned long base = (unsigned long)hwif->hwif_data;
u8 scsc, mask = 0;
- scsc = sil_ioread8(dev, base + (hwif->mmio ? 0x4A : 0x8A));
+ base += (hwif->host_flags & IDE_HFLAG_MMIO) ? 0x4A : 0x8A;
+
+ scsc = sil_ioread8(dev, base);
switch (scsc & 0x30) {
case 0x10: /* 133 */
@@ -238,8 +240,9 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
unsigned long tfaddr = siimage_selreg(hwif, 0x02);
unsigned long base = (unsigned long)hwif->hwif_data;
u8 tf_pio = pio;
- u8 addr_mask = hwif->channel ? (hwif->mmio ? 0xF4 : 0x84)
- : (hwif->mmio ? 0xB4 : 0x80);
+ u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
+ u8 addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84)
+ : (mmio ? 0xB4 : 0x80);
u8 mode = 0;
u8 unit = drive->select.b.unit;
@@ -290,13 +293,13 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
u16 ultra = 0, multi = 0;
u8 mode = 0, unit = drive->select.b.unit;
unsigned long base = (unsigned long)hwif->hwif_data;
- u8 scsc = 0, addr_mask = hwif->channel ?
- (hwif->mmio ? 0xF4 : 0x84) :
- (hwif->mmio ? 0xB4 : 0x80);
+ u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
+ u8 scsc = 0, addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84)
+ : (mmio ? 0xB4 : 0x80);
unsigned long ma = siimage_seldev(drive, 0x08);
unsigned long ua = siimage_seldev(drive, 0x0C);
- scsc = sil_ioread8 (dev, base + (hwif->mmio ? 0x4A : 0x8A));
+ scsc = sil_ioread8 (dev, base + (mmio ? 0x4A : 0x8A));
mode = sil_ioread8 (dev, base + addr_mask);
multi = sil_ioread16(dev, ma);
ultra = sil_ioread16(dev, ua);
@@ -391,7 +394,7 @@ static int siimage_mmio_dma_test_irq(ide_drive_t *drive)
static int siimage_dma_test_irq(ide_drive_t *drive)
{
- if (drive->hwif->mmio)
+ if (drive->hwif->host_flags & IDE_HFLAG_MMIO)
return siimage_mmio_dma_test_irq(drive);
else
return siimage_io_dma_test_irq(drive);
@@ -640,8 +643,6 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
hwif->irq = dev->irq;
hwif->dma_base = (unsigned long)addr + (ch ? 0x08 : 0x00);
-
- hwif->mmio = 1;
}
static int is_dev_seagate_sata(ide_drive_t *drive)
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index 566e0ec..3ed9728 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -120,21 +120,21 @@ static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
if (~vdev->via_config->flags & VIA_BAD_AST) {
pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t);
- t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
+ t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
pci_write_config_byte(dev, VIA_ADDRESS_SETUP, t);
}
pci_write_config_byte(dev, VIA_8BIT_TIMING + (1 - (dn >> 1)),
- ((FIT(timing->act8b, 1, 16) - 1) << 4) | (FIT(timing->rec8b, 1, 16) - 1));
+ ((clamp_val(timing->act8b, 1, 16) - 1) << 4) | (clamp_val(timing->rec8b, 1, 16) - 1));
pci_write_config_byte(dev, VIA_DRIVE_TIMING + (3 - dn),
- ((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1));
+ ((clamp_val(timing->active, 1, 16) - 1) << 4) | (clamp_val(timing->recover, 1, 16) - 1));
switch (vdev->via_config->udma_mask) {
- case ATA_UDMA2: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break;
- case ATA_UDMA4: t = timing->udma ? (0xe8 | (FIT(timing->udma, 2, 9) - 2)) : 0x0f; break;
- case ATA_UDMA5: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break;
- case ATA_UDMA6: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break;
+ case ATA_UDMA2: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 5) - 2)) : 0x03; break;
+ case ATA_UDMA4: t = timing->udma ? (0xe8 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x0f; break;
+ case ATA_UDMA5: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break;
+ case ATA_UDMA6: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break;
default: return;
}
@@ -340,7 +340,7 @@ static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const
* Determine system bus clock.
*/
- via_clock = (ide_pci_clk ? ide_pci_clk : system_bus_clock()) * 1000;
+ via_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000;
switch (via_clock) {
case 33000: via_clock = 33333; break;
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index ba2d587..dcb2c46 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -480,13 +480,13 @@ pmac_ide_do_update_timings(ide_drive_t *drive)
pmac_ide_selectproc(drive);
}
-static void
-pmac_outbsync(ide_drive_t *drive, u8 value, unsigned long port)
+static void pmac_outbsync(ide_hwif_t *hwif, u8 value, unsigned long port)
{
u32 tmp;
writeb(value, (void __iomem *) port);
- tmp = readl(PMAC_IDE_REG(IDE_TIMING_CONFIG));
+ tmp = readl((void __iomem *)(hwif->io_ports.data_addr
+ + IDE_TIMING_CONFIG));
}
/*
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 5171601..abcfb17 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -87,7 +87,7 @@ unsigned long ide_pci_dma_base(ide_hwif_t *hwif, const struct ide_port_info *d)
unsigned long dma_base = 0;
u8 dma_stat = 0;
- if (hwif->mmio)
+ if (hwif->host_flags & IDE_HFLAG_MMIO)
return hwif->dma_base;
if (hwif->mate && hwif->mate->dma_base) {
@@ -374,7 +374,7 @@ int ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d)
if (base == 0 || ide_pci_set_master(dev, d->name) < 0)
return -1;
- if (hwif->mmio)
+ if (hwif->host_flags & IDE_HFLAG_MMIO)
printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name);
else
printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n",
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index 44d8d51..683bce3 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -60,6 +60,13 @@
#define IDESCSI_DEBUG_LOG 0
+#if IDESCSI_DEBUG_LOG
+#define debug_log(fmt, args...) \
+ printk(KERN_INFO "ide-scsi: " fmt, ## args)
+#else
+#define debug_log(fmt, args...) do {} while (0)
+#endif
+
/*
* SCSI command transformation layer
*/
@@ -129,14 +136,15 @@ static inline idescsi_scsi_t *drive_to_idescsi(ide_drive_t *ide_drive)
#define IDESCSI_PC_RQ 90
/*
- * PIO data transfer routines using the scatter gather table.
+ * PIO data transfer routine using the scatter gather table.
*/
-static void idescsi_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
- unsigned int bcount)
+static void ide_scsi_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
+ unsigned int bcount, int write)
{
ide_hwif_t *hwif = drive->hwif;
- int count;
+ xfer_func_t *xf = write ? hwif->output_data : hwif->input_data;
char *buf;
+ int count;
while (bcount) {
count = min(pc->sg->length - pc->b_count, bcount);
@@ -145,13 +153,13 @@ static void idescsi_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
local_irq_save(flags);
buf = kmap_atomic(sg_page(pc->sg), KM_IRQ0) +
- pc->sg->offset;
- hwif->input_data(drive, NULL, buf + pc->b_count, count);
+ pc->sg->offset;
+ xf(drive, NULL, buf + pc->b_count, count);
kunmap_atomic(buf - pc->sg->offset, KM_IRQ0);
local_irq_restore(flags);
} else {
buf = sg_virt(pc->sg);
- hwif->input_data(drive, NULL, buf + pc->b_count, count);
+ xf(drive, NULL, buf + pc->b_count, count);
}
bcount -= count; pc->b_count += count;
if (pc->b_count == pc->sg->length) {
@@ -163,51 +171,34 @@ static void idescsi_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
}
if (bcount) {
- printk (KERN_ERR "ide-scsi: scatter gather table too small, discarding data\n");
- ide_pad_transfer(drive, 0, bcount);
+ printk(KERN_ERR "%s: scatter gather table too small, %s\n",
+ drive->name, write ? "padding with zeros"
+ : "discarding data");
+ ide_pad_transfer(drive, write, bcount);
}
}
-static void idescsi_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
- unsigned int bcount)
+static void ide_scsi_hex_dump(u8 *data, int len)
{
- ide_hwif_t *hwif = drive->hwif;
- int count;
- char *buf;
+ print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, data, len, 0);
+}
- while (bcount) {
- count = min(pc->sg->length - pc->b_count, bcount);
- if (PageHighMem(sg_page(pc->sg))) {
- unsigned long flags;
+static int idescsi_end_request(ide_drive_t *, int, int);
- local_irq_save(flags);
- buf = kmap_atomic(sg_page(pc->sg), KM_IRQ0) +
- pc->sg->offset;
- hwif->output_data(drive, NULL, buf + pc->b_count, count);
- kunmap_atomic(buf - pc->sg->offset, KM_IRQ0);
- local_irq_restore(flags);
- } else {
- buf = sg_virt(pc->sg);
- hwif->output_data(drive, NULL, buf + pc->b_count, count);
- }
- bcount -= count; pc->b_count += count;
- if (pc->b_count == pc->sg->length) {
- if (!--pc->sg_cnt)
- break;
- pc->sg = sg_next(pc->sg);
- pc->b_count = 0;
- }
- }
+static void ide_scsi_callback(ide_drive_t *drive)
+{
+ idescsi_scsi_t *scsi = drive_to_idescsi(drive);
+ struct ide_atapi_pc *pc = scsi->pc;
- if (bcount) {
- printk (KERN_ERR "ide-scsi: scatter gather table too small, padding with zeros\n");
- ide_pad_transfer(drive, 1, bcount);
- }
-}
+ if (pc->flags & PC_FLAG_TIMEDOUT)
+ debug_log("%s: got timed out packet %lu at %lu\n", __func__,
+ pc->scsi_cmd->serial_number, jiffies);
+ /* end this request now - scsi should retry it*/
+ else if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
+ printk(KERN_INFO "Packet command completed, %d bytes"
+ " transferred\n", pc->xferred);
-static void ide_scsi_hex_dump(u8 *data, int len)
-{
- print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, data, len, 0);
+ idescsi_end_request(drive, 1, 0);
}
static int idescsi_check_condition(ide_drive_t *drive,
@@ -228,14 +219,16 @@ static int idescsi_check_condition(ide_drive_t *drive,
kfree(pc);
return -ENOMEM;
}
- ide_init_drive_cmd(rq);
+ blk_rq_init(NULL, rq);
rq->special = (char *) pc;
pc->rq = rq;
pc->buf = buf;
pc->c[0] = REQUEST_SENSE;
pc->c[4] = pc->req_xfer = pc->buf_size = SCSI_SENSE_BUFFERSIZE;
rq->cmd_type = REQ_TYPE_SENSE;
+ rq->cmd_flags |= REQ_PREEMPT;
pc->timeout = jiffies + WAIT_READY;
+ pc->callback = ide_scsi_callback;
/* NOTE! Save the failed packet command in "rq->buffer" */
rq->buffer = (void *) failed_cmd->special;
pc->scsi_cmd = ((struct ide_atapi_pc *) failed_cmd->special)->scsi_cmd;
@@ -244,11 +237,10 @@ static int idescsi_check_condition(ide_drive_t *drive,
ide_scsi_hex_dump(pc->c, 6);
}
rq->rq_disk = scsi->disk;
- return ide_do_drive_cmd(drive, rq, ide_preempt);
+ ide_do_drive_cmd(drive, rq);
+ return 0;
}
-static int idescsi_end_request(ide_drive_t *, int, int);
-
static ide_startstop_t
idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err)
{
@@ -256,7 +248,7 @@ idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err)
if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT))
/* force an abort */
- hwif->OUTBSYNC(drive, WIN_IDLEIMMEDIATE,
+ hwif->OUTBSYNC(hwif, WIN_IDLEIMMEDIATE,
hwif->io_ports.command_addr);
rq->errors++;
@@ -269,10 +261,9 @@ idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err)
static ide_startstop_t
idescsi_atapi_abort(ide_drive_t *drive, struct request *rq)
{
-#if IDESCSI_DEBUG_LOG
- printk(KERN_WARNING "idescsi_atapi_abort called for %lu\n",
+ debug_log("%s called for %lu\n", __func__,
((struct ide_atapi_pc *) rq->special)->scsi_cmd->serial_number);
-#endif
+
rq->errors |= ERROR_MAX;
idescsi_end_request(drive, 0, 0);
@@ -351,9 +342,9 @@ static int idescsi_expiry(ide_drive_t *drive)
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
struct ide_atapi_pc *pc = scsi->pc;
-#if IDESCSI_DEBUG_LOG
- printk(KERN_WARNING "idescsi_expiry called for %lu at %lu\n", pc->scsi_cmd->serial_number, jiffies);
-#endif
+ debug_log("%s called for %lu at %lu\n", __func__,
+ pc->scsi_cmd->serial_number, jiffies);
+
pc->flags |= PC_FLAG_TIMEDOUT;
return 0; /* we do not want the ide subsystem to retry */
@@ -365,141 +356,19 @@ static int idescsi_expiry(ide_drive_t *drive)
static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive)
{
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
- ide_hwif_t *hwif = drive->hwif;
struct ide_atapi_pc *pc = scsi->pc;
- struct request *rq = pc->rq;
- unsigned int temp;
- u16 bcount;
- u8 stat, ireason;
-
-#if IDESCSI_DEBUG_LOG
- printk (KERN_INFO "ide-scsi: Reached idescsi_pc_intr interrupt handler\n");
-#endif /* IDESCSI_DEBUG_LOG */
-
- if (pc->flags & PC_FLAG_TIMEDOUT) {
-#if IDESCSI_DEBUG_LOG
- printk(KERN_WARNING "idescsi_pc_intr: got timed out packet %lu at %lu\n",
- pc->scsi_cmd->serial_number, jiffies);
-#endif
- /* end this request now - scsi should retry it*/
- idescsi_end_request (drive, 1, 0);
- return ide_stopped;
- }
- if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
- pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
-#if IDESCSI_DEBUG_LOG
- printk ("ide-scsi: %s: DMA complete\n", drive->name);
-#endif /* IDESCSI_DEBUG_LOG */
- pc->xferred = pc->req_xfer;
- (void)hwif->dma_ops->dma_end(drive);
- }
-
- /* Clear the interrupt */
- stat = ide_read_status(drive);
-
- if ((stat & DRQ_STAT) == 0) {
- /* No more interrupts */
- if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
- printk(KERN_INFO "Packet command completed, %d bytes"
- " transferred\n", pc->xferred);
- local_irq_enable_in_hardirq();
- if (stat & ERR_STAT)
- rq->errors++;
- idescsi_end_request (drive, 1, 0);
- return ide_stopped;
- }
- bcount = (hwif->INB(hwif->io_ports.lbah_addr) << 8) |
- hwif->INB(hwif->io_ports.lbam_addr);
- ireason = hwif->INB(hwif->io_ports.nsect_addr);
-
- if (ireason & CD) {
- printk(KERN_ERR "ide-scsi: CoD != 0 in idescsi_pc_intr\n");
- return ide_do_reset (drive);
- }
- if (ireason & IO) {
- temp = pc->xferred + bcount;
- if (temp > pc->req_xfer) {
- if (temp > pc->buf_size) {
- printk(KERN_ERR "ide-scsi: The scsi wants to "
- "send us more data than expected "
- "- discarding data\n");
- temp = pc->buf_size - pc->xferred;
- if (temp) {
- pc->flags &= ~PC_FLAG_WRITING;
- if (pc->sg)
- idescsi_input_buffers(drive, pc,
- temp);
- else
- hwif->input_data(drive, NULL,
- pc->cur_pos, temp);
- printk(KERN_ERR "ide-scsi: transferred"
- " %d of %d bytes\n",
- temp, bcount);
- }
- pc->xferred += temp;
- pc->cur_pos += temp;
- ide_pad_transfer(drive, 0, bcount - temp);
- ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry);
- return ide_started;
- }
-#if IDESCSI_DEBUG_LOG
- printk (KERN_NOTICE "ide-scsi: The scsi wants to send us more data than expected - allowing transfer\n");
-#endif /* IDESCSI_DEBUG_LOG */
- }
- }
- if (ireason & IO) {
- pc->flags &= ~PC_FLAG_WRITING;
- if (pc->sg)
- idescsi_input_buffers(drive, pc, bcount);
- else
- hwif->input_data(drive, NULL, pc->cur_pos, bcount);
- } else {
- pc->flags |= PC_FLAG_WRITING;
- if (pc->sg)
- idescsi_output_buffers(drive, pc, bcount);
- else
- hwif->output_data(drive, NULL, pc->cur_pos, bcount);
- }
- /* Update the current position */
- pc->xferred += bcount;
- pc->cur_pos += bcount;
- /* And set the interrupt handler again */
- ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry);
- return ide_started;
+ return ide_pc_intr(drive, pc, idescsi_pc_intr, get_timeout(pc),
+ idescsi_expiry, NULL, NULL, NULL,
+ ide_scsi_io_buffers);
}
static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
- struct ide_atapi_pc *pc = scsi->pc;
- ide_startstop_t startstop;
- u8 ireason;
- if (ide_wait_stat(&startstop,drive,DRQ_STAT,BUSY_STAT,WAIT_READY)) {
- printk(KERN_ERR "ide-scsi: Strange, packet command "
- "initiated yet DRQ isn't asserted\n");
- return startstop;
- }
- ireason = hwif->INB(hwif->io_ports.nsect_addr);
- if ((ireason & CD) == 0 || (ireason & IO)) {
- printk(KERN_ERR "ide-scsi: (IO,CoD) != (0,1) while "
- "issuing a packet command\n");
- return ide_do_reset (drive);
- }
- BUG_ON(HWGROUP(drive)->handler != NULL);
- /* Set the interrupt routine */
- ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry);
-
- /* Send the actual packet */
- hwif->output_data(drive, NULL, scsi->pc->c, 12);
-
- if (pc->flags & PC_FLAG_DMA_OK) {
- pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
- hwif->dma_ops->dma_start(drive);
- }
- return ide_started;
+ return ide_transfer_pc(drive, scsi->pc, idescsi_pc_intr,
+ get_timeout(scsi->pc), idescsi_expiry);
}
static inline int idescsi_set_direction(struct ide_atapi_pc *pc)
@@ -545,38 +414,12 @@ static ide_startstop_t idescsi_issue_pc(ide_drive_t *drive,
struct ide_atapi_pc *pc)
{
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
- ide_hwif_t *hwif = drive->hwif;
- u16 bcount;
- u8 dma = 0;
/* Set the current packet command */
scsi->pc = pc;
- /* We haven't transferred any data yet */
- pc->xferred = 0;
- pc->cur_pos = pc->buf;
- /* Request to transfer the entire buffer at once */
- bcount = min(pc->req_xfer, 63 * 1024);
-
- if (drive->using_dma && !idescsi_map_sg(drive, pc)) {
- hwif->sg_mapped = 1;
- dma = !hwif->dma_ops->dma_setup(drive);
- hwif->sg_mapped = 0;
- }
-
- ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK, bcount, dma);
- if (dma)
- pc->flags |= PC_FLAG_DMA_OK;
-
- if (test_bit(IDESCSI_DRQ_INTERRUPT, &scsi->flags)) {
- ide_execute_command(drive, WIN_PACKETCMD, &idescsi_transfer_pc,
- get_timeout(pc), idescsi_expiry);
- return ide_started;
- } else {
- /* Issue the packet command */
- ide_execute_pkt_cmd(drive);
- return idescsi_transfer_pc(drive);
- }
+ return ide_issue_pc(drive, pc, idescsi_transfer_pc,
+ get_timeout(pc), idescsi_expiry);
}
/*
@@ -584,14 +427,22 @@ static ide_startstop_t idescsi_issue_pc(ide_drive_t *drive,
*/
static ide_startstop_t idescsi_do_request (ide_drive_t *drive, struct request *rq, sector_t block)
{
-#if IDESCSI_DEBUG_LOG
- printk (KERN_INFO "dev: %s, cmd: %x, errors: %d\n", rq->rq_disk->disk_name,rq->cmd[0],rq->errors);
- printk (KERN_INFO "sector: %ld, nr_sectors: %ld, current_nr_sectors: %d\n",rq->sector,rq->nr_sectors,rq->current_nr_sectors);
-#endif /* IDESCSI_DEBUG_LOG */
+ debug_log("dev: %s, cmd: %x, errors: %d\n", rq->rq_disk->disk_name,
+ rq->cmd[0], rq->errors);
+ debug_log("sector: %ld, nr_sectors: %ld, current_nr_sectors: %d\n",
+ rq->sector, rq->nr_sectors, rq->current_nr_sectors);
if (blk_sense_request(rq) || blk_special_request(rq)) {
- return idescsi_issue_pc(drive,
- (struct ide_atapi_pc *) rq->special);
+ struct ide_atapi_pc *pc = (struct ide_atapi_pc *)rq->special;
+ idescsi_scsi_t *scsi = drive_to_idescsi(drive);
+
+ if (test_bit(IDESCSI_DRQ_INTERRUPT, &scsi->flags))
+ pc->flags |= PC_FLAG_DRQ_INTERRUPT;
+
+ if (drive->using_dma && !idescsi_map_sg(drive, pc))
+ pc->flags |= PC_FLAG_DMA_OK;
+
+ return idescsi_issue_pc(drive, pc);
}
blk_dump_rq_flags(rq, "ide-scsi: unsup command");
idescsi_end_request (drive, 0, 0);
@@ -646,6 +497,8 @@ static void ide_scsi_remove(ide_drive_t *drive)
put_disk(g);
ide_scsi_put(scsi);
+
+ drive->scsi = 0;
}
static int ide_scsi_probe(ide_drive_t *);
@@ -765,6 +618,8 @@ static int idescsi_queue (struct scsi_cmnd *cmd,
memset (pc->c, 0, 12);
pc->flags = 0;
+ if (cmd->sc_data_direction == DMA_TO_DEVICE)
+ pc->flags |= PC_FLAG_WRITING;
pc->rq = rq;
memcpy (pc->c, cmd->cmnd, cmd->cmd_len);
pc->buf = NULL;
@@ -775,6 +630,7 @@ static int idescsi_queue (struct scsi_cmnd *cmd,
pc->scsi_cmd = cmd;
pc->done = done;
pc->timeout = jiffies + cmd->timeout_per_command;
+ pc->callback = ide_scsi_callback;
if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) {
printk ("ide-scsi: %s: que %lu, cmd = ", drive->name, cmd->serial_number);
@@ -785,12 +641,11 @@ static int idescsi_queue (struct scsi_cmnd *cmd,
}
}
- ide_init_drive_cmd (rq);
+ blk_rq_init(NULL, rq);
rq->special = (char *) pc;
rq->cmd_type = REQ_TYPE_SPECIAL;
spin_unlock_irq(host->host_lock);
- rq->rq_disk = scsi->disk;
- (void) ide_do_drive_cmd (drive, rq, ide_end);
+ blk_execute_rq_nowait(drive->queue, scsi->disk, rq, 0, NULL);
spin_lock_irq(host->host_lock);
return 0;
abort:
@@ -985,6 +840,8 @@ static int ide_scsi_probe(ide_drive_t *drive)
!(host = scsi_host_alloc(&idescsi_template,sizeof(idescsi_scsi_t))))
return -ENODEV;
+ drive->scsi = 1;
+
g = alloc_disk(1 << PARTN_BITS);
if (!g)
goto out_host_put;
@@ -993,10 +850,10 @@ static int ide_scsi_probe(ide_drive_t *drive)
host->max_id = 1;
-#if IDESCSI_DEBUG_LOG
if (drive->id->last_lun)
- printk(KERN_NOTICE "%s: id->last_lun=%u\n", drive->name, drive->id->last_lun);
-#endif
+ debug_log("%s: id->last_lun=%u\n", drive->name,
+ drive->id->last_lun);
+
if ((drive->id->last_lun & 0x7) != 7)
host->max_lun = (drive->id->last_lun & 0x7) + 1;
else
@@ -1025,6 +882,7 @@ static int ide_scsi_probe(ide_drive_t *drive)
put_disk(g);
out_host_put:
+ drive->scsi = 0;
scsi_host_put(host);
return err;
}
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index d2a1b71..1171abd 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -623,7 +623,6 @@ extern void generic_make_request(struct bio *bio);
extern void blk_rq_init(struct request_queue *q, struct request *rq);
extern void blk_put_request(struct request *);
extern void __blk_put_request(struct request_queue *, struct request *);
-extern void blk_end_sync_rq(struct request *rq, int error);
extern struct request *blk_get_request(struct request_queue *, int, gfp_t);
extern void blk_insert_request(struct request_queue *, struct request *, int, void *);
extern void blk_requeue_request(struct request_queue *, struct request *);
diff --git a/include/linux/ide.h b/include/linux/ide.h
index eddb6da..ac4eeb2 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -364,7 +364,6 @@ typedef struct ide_drive_s {
u8 wcache; /* status of write cache */
u8 acoustic; /* acoustic management */
u8 media; /* disk, cdrom, tape, floppy, ... */
- u8 ctl; /* "normal" value for Control register */
u8 ready_stat; /* min status value for drive ready */
u8 mult_count; /* current multiple sector setting */
u8 mult_req; /* requested multiple sector setting */
@@ -493,7 +492,7 @@ typedef struct hwif_s {
void (*ide_dma_clear_irq)(ide_drive_t *drive);
void (*OUTB)(u8 addr, unsigned long port);
- void (*OUTBSYNC)(ide_drive_t *drive, u8 addr, unsigned long port);
+ void (*OUTBSYNC)(struct hwif_s *hwif, u8 addr, unsigned long port);
u8 (*INB)(unsigned long port);
@@ -532,7 +531,6 @@ typedef struct hwif_s {
unsigned serialized : 1; /* serialized all channel operation */
unsigned sharing_irq: 1; /* 1 = sharing irq with another hwif */
unsigned sg_mapped : 1; /* sg_table and sg_nents are ready */
- unsigned mmio : 1; /* host uses MMIO */
struct device gendev;
struct device *portdev;
@@ -604,12 +602,13 @@ enum {
PC_FLAG_SUPPRESS_ERROR = (1 << 1),
PC_FLAG_WAIT_FOR_DSC = (1 << 2),
PC_FLAG_DMA_OK = (1 << 3),
- PC_FLAG_DMA_RECOMMENDED = (1 << 4),
- PC_FLAG_DMA_IN_PROGRESS = (1 << 5),
- PC_FLAG_DMA_ERROR = (1 << 6),
- PC_FLAG_WRITING = (1 << 7),
+ PC_FLAG_DMA_IN_PROGRESS = (1 << 4),
+ PC_FLAG_DMA_ERROR = (1 << 5),
+ PC_FLAG_WRITING = (1 << 6),
/* command timed out */
- PC_FLAG_TIMEDOUT = (1 << 8),
+ PC_FLAG_TIMEDOUT = (1 << 7),
+ PC_FLAG_ZIP_DRIVE = (1 << 8),
+ PC_FLAG_DRQ_INTERRUPT = (1 << 9),
};
struct ide_atapi_pc {
@@ -642,8 +641,8 @@ struct ide_atapi_pc {
* to change/removal later.
*/
u8 pc_buf[256];
- void (*idefloppy_callback) (ide_drive_t *);
- ide_startstop_t (*idetape_callback) (ide_drive_t *);
+
+ void (*callback)(ide_drive_t *);
/* idetape only */
struct idetape_bh *bh;
@@ -813,10 +812,6 @@ int generic_ide_ioctl(ide_drive_t *, struct file *, struct block_device *, unsig
#ifndef _IDE_C
extern ide_hwif_t ide_hwifs[]; /* master data repository */
#endif
-extern int ide_noacpi;
-extern int ide_acpigtf;
-extern int ide_acpionboot;
-extern int noautodma;
extern int ide_vlb_clk;
extern int ide_pci_clk;
@@ -857,25 +852,12 @@ int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
extern ide_startstop_t ide_do_reset (ide_drive_t *);
-extern void ide_init_drive_cmd (struct request *rq);
-
-/*
- * "action" parameter type for ide_do_drive_cmd() below.
- */
-typedef enum {
- ide_wait, /* insert rq at end of list, and wait for it */
- ide_preempt, /* insert rq in front of current request */
- ide_head_wait, /* insert rq in front of current request and wait for it */
- ide_end /* insert rq at end of list, but don't wait for it */
-} ide_action_t;
-
-extern int ide_do_drive_cmd(ide_drive_t *, struct request *, ide_action_t);
+extern void ide_do_drive_cmd(ide_drive_t *, struct request *);
extern void ide_end_drive_cmd(ide_drive_t *, u8, u8);
enum {
IDE_TFLAG_LBA48 = (1 << 0),
- IDE_TFLAG_NO_SELECT_MASK = (1 << 1),
IDE_TFLAG_FLAGGED = (1 << 2),
IDE_TFLAG_OUT_DATA = (1 << 3),
IDE_TFLAG_OUT_HOB_FEATURE = (1 << 4),
@@ -980,11 +962,23 @@ typedef struct ide_task_s {
void ide_tf_dump(const char *, struct ide_taskfile *);
extern void SELECT_DRIVE(ide_drive_t *);
+void SELECT_MASK(ide_drive_t *, int);
extern int drive_is_ready(ide_drive_t *);
void ide_pktcmd_tf_load(ide_drive_t *, u32, u16, u8);
+ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
+ ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry,
+ void (*update_buffers)(ide_drive_t *, struct ide_atapi_pc *),
+ void (*retry_pc)(ide_drive_t *), void (*dsc_handle)(ide_drive_t *),
+ void (*io_buffers)(ide_drive_t *, struct ide_atapi_pc *, unsigned int,
+ int));
+ide_startstop_t ide_transfer_pc(ide_drive_t *, struct ide_atapi_pc *,
+ ide_handler_t *, unsigned int, ide_expiry_t *);
+ide_startstop_t ide_issue_pc(ide_drive_t *, struct ide_atapi_pc *,
+ ide_handler_t *, unsigned int, ide_expiry_t *);
+
ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);
void task_end_request(ide_drive_t *, struct request *, u8);
@@ -996,8 +990,6 @@ int ide_taskfile_ioctl(ide_drive_t *, unsigned int, unsigned long);
int ide_cmd_ioctl(ide_drive_t *, unsigned int, unsigned long);
int ide_task_ioctl(ide_drive_t *, unsigned int, unsigned long);
-extern int system_bus_clock(void);
-
extern int ide_driveid_update(ide_drive_t *);
extern int ide_config_drive_speed(ide_drive_t *, u8);
extern u8 eighty_ninty_three (ide_drive_t *);
@@ -1349,7 +1341,8 @@ static inline void ide_set_irq(ide_drive_t *drive, int on)
{
ide_hwif_t *hwif = drive->hwif;
- hwif->OUTB(drive->ctl | (on ? 0 : 2), hwif->io_ports.ctl_addr);
+ hwif->OUTBSYNC(hwif, ATA_DEVCTL_OBS | (on ? 0 : 2),
+ hwif->io_ports.ctl_addr);
}
static inline u8 ide_read_status(ide_drive_t *drive)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists