| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20080729020356.GI3135@martell.zuzino.mipt.ru>
Date: Tue, 29 Jul 2008 06:03:56 +0400
From: Alexey Dobriyan <adobriyan@...il.com>
To: akpm@...l.org, alan@...rguk.ukuu.org.uk
Cc: linux-kernel@...r.kernel.org
Subject: [PATCH 09/13] proc tty: switch sdio_uart to ->proc_fops
Signed-off-by: Alexey Dobriyan <adobriyan@...il.com>
---
drivers/mmc/card/sdio_uart.c | 66 ++++++++++++++++++++++---------------------
1 file changed, 34 insertions(+), 32 deletions(-)
--- a/drivers/mmc/card/sdio_uart.c
+++ b/drivers/mmc/card/sdio_uart.c
@@ -33,6 +33,7 @@
#include <linux/serial_reg.h>
#include <linux/circ_buf.h>
#include <linux/gfp.h>
+#include <linux/seq_file.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
@@ -933,67 +934,66 @@ static int sdio_uart_tiocmset(struct tty_struct *tty, struct file *file,
return result;
}
-static int sdio_uart_read_proc(char *page, char **start, off_t off,
- int count, int *eof, void *data)
+#ifdef CONFIG_PROC_FS
+static int sdio_uart_proc_show(struct seq_file *m, void *v)
{
- int i, len = 0;
- off_t begin = 0;
+ int i;
- len += sprintf(page, "serinfo:1.0 driver%s%s revision:%s\n",
+ seq_printf(m, "serinfo:1.0 driver%s%s revision:%s\n",
"", "", "");
- for (i = 0; i < UART_NR && len < PAGE_SIZE - 96; i++) {
+ for (i = 0; i < UART_NR; i++) {
struct sdio_uart_port *port = sdio_uart_port_get(i);
if (port) {
- len += sprintf(page+len, "%d: uart:SDIO", i);
+ seq_printf(m, "%d: uart:SDIO", i);
if(capable(CAP_SYS_ADMIN)) {
- len += sprintf(page + len, " tx:%d rx:%d",
+ seq_printf(m, " tx:%d rx:%d",
port->icount.tx, port->icount.rx);
if (port->icount.frame)
- len += sprintf(page + len, " fe:%d",
+ seq_printf(m, " fe:%d",
port->icount.frame);
if (port->icount.parity)
- len += sprintf(page + len, " pe:%d",
+ seq_printf(m, " pe:%d",
port->icount.parity);
if (port->icount.brk)
- len += sprintf(page + len, " brk:%d",
+ seq_printf(m, " brk:%d",
port->icount.brk);
if (port->icount.overrun)
- len += sprintf(page + len, " oe:%d",
+ seq_printf(m, " oe:%d",
port->icount.overrun);
if (port->icount.cts)
- len += sprintf(page + len, " cts:%d",
+ seq_printf(m, " cts:%d",
port->icount.cts);
if (port->icount.dsr)
- len += sprintf(page + len, " dsr:%d",
+ seq_printf(m, " dsr:%d",
port->icount.dsr);
if (port->icount.rng)
- len += sprintf(page + len, " rng:%d",
+ seq_printf(m, " rng:%d",
port->icount.rng);
if (port->icount.dcd)
- len += sprintf(page + len, " dcd:%d",
+ seq_printf(m, " dcd:%d",
port->icount.dcd);
}
- strcat(page, "\n");
- len++;
+ seq_putc(m, '\n');
sdio_uart_port_put(port);
}
-
- if (len + begin > off + count)
- goto done;
- if (len + begin < off) {
- begin += len;
- len = 0;
- }
}
- *eof = 1;
+ return 0;
+}
-done:
- if (off >= len + begin)
- return 0;
- *start = page + (off - begin);
- return (count < begin + len - off) ? count : (begin + len - off);
+static int sdio_uart_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, sdio_uart_proc_show, NULL);
}
+static const struct file_operations sdio_uart_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = sdio_uart_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+#endif
+
static const struct tty_operations sdio_uart_ops = {
.open = sdio_uart_open,
.close = sdio_uart_close,
@@ -1007,7 +1007,9 @@ static const struct tty_operations sdio_uart_ops = {
.break_ctl = sdio_uart_break_ctl,
.tiocmget = sdio_uart_tiocmget,
.tiocmset = sdio_uart_tiocmset,
- .read_proc = sdio_uart_read_proc,
+#ifdef CONFIG_PROC_FS
+ .proc_fops = &sdio_uart_proc_fops,
+#endif
};
static struct tty_driver *sdio_uart_tty_driver;
--
1.5.4.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists