| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20080729020452.GJ3135@martell.zuzino.mipt.ru>
Date: Tue, 29 Jul 2008 06:04:52 +0400
From: Alexey Dobriyan <adobriyan@...il.com>
To: akpm@...l.org, alan@...rguk.ukuu.org.uk
Cc: linux-kernel@...r.kernel.org
Subject: [PATCH 10/13] proc tty: switch serial_core to ->proc_fops
Signed-off-by: Alexey Dobriyan <adobriyan@...il.com>
---
drivers/serial/serial_core.c | 78 +++++++++++++++++++------------------------
1 file changed, 36 insertions(+), 42 deletions(-)
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -27,6 +27,8 @@
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/console.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/serial_core.h>
#include <linux/smp_lock.h>
#include <linux/device.h>
@@ -1701,20 +1703,20 @@ static const char *uart_type(struct uart_port *port)
#ifdef CONFIG_PROC_FS
-static int uart_line_info(char *buf, struct uart_driver *drv, int i)
+static int uart_line_info(struct seq_file *m, struct uart_driver *drv, int i)
{
struct uart_state *state = drv->state + i;
int pm_state;
struct uart_port *port = state->port;
char stat_buf[32];
unsigned int status;
- int mmio, ret;
+ int mmio;
if (!port)
return 0;
mmio = port->iotype >= UPIO_MEM;
- ret = sprintf(buf, "%d: uart:%s %s%08llX irq:%d",
+ seq_printf(m, "%d: uart:%s %s%08llX irq:%d",
port->line, uart_type(port),
mmio ? "mmio:0x" : "port:",
mmio ? (unsigned long long)port->mapbase
@@ -1722,8 +1724,8 @@ static int uart_line_info(char *buf, struct uart_driver *drv, int i)
port->irq);
if (port->type == PORT_UNKNOWN) {
- strcat(buf, "\n");
- return ret + 1;
+ seq_putc(m, '\n');
+ return 0;
}
if (capable(CAP_SYS_ADMIN)) {
@@ -1738,20 +1740,15 @@ static int uart_line_info(char *buf, struct uart_driver *drv, int i)
uart_change_pm(state, pm_state);
mutex_unlock(&state->mutex);
- ret += sprintf(buf + ret, " tx:%d rx:%d",
- port->icount.tx, port->icount.rx);
+ seq_printf(m, " tx:%d rx:%d", port->icount.tx, port->icount.rx);
if (port->icount.frame)
- ret += sprintf(buf + ret, " fe:%d",
- port->icount.frame);
+ seq_printf(m, " fe:%d", port->icount.frame);
if (port->icount.parity)
- ret += sprintf(buf + ret, " pe:%d",
- port->icount.parity);
+ seq_printf(m, " pe:%d", port->icount.parity);
if (port->icount.brk)
- ret += sprintf(buf + ret, " brk:%d",
- port->icount.brk);
+ seq_printf(m, " brk:%d", port->icount.brk);
if (port->icount.overrun)
- ret += sprintf(buf + ret, " oe:%d",
- port->icount.overrun);
+ seq_printf(m, " oe:%d", port->icount.overrun);
#define INFOBIT(bit, str) \
if (port->mctrl & (bit)) \
@@ -1774,43 +1771,40 @@ static int uart_line_info(char *buf, struct uart_driver *drv, int i)
stat_buf[0] = ' ';
strcat(stat_buf, "\n");
- ret += sprintf(buf + ret, stat_buf);
+ seq_puts(m, stat_buf);
} else {
- strcat(buf, "\n");
- ret++;
+ seq_putc(m, '\n');
}
#undef STATBIT
#undef INFOBIT
- return ret;
+ return 0;
}
-static int uart_read_proc(char *page, char **start, off_t off,
- int count, int *eof, void *data)
+static int uart_proc_show(struct seq_file *m, void *v)
{
- struct tty_driver *ttydrv = data;
+ struct tty_driver *ttydrv = m->private;
struct uart_driver *drv = ttydrv->driver_state;
- int i, len = 0, l;
- off_t begin = 0;
+ int i;
- len += sprintf(page, "serinfo:1.0 driver%s%s revision:%s\n",
+ seq_printf(m, "serinfo:1.0 driver%s%s revision:%s\n",
"", "", "");
- for (i = 0; i < drv->nr && len < PAGE_SIZE - 96; i++) {
- l = uart_line_info(page + len, drv, i);
- len += l;
- if (len + begin > off + count)
- goto done;
- if (len + begin < off) {
- begin += len;
- len = 0;
- }
- }
- *eof = 1;
- done:
- if (off >= len + begin)
- return 0;
- *start = page + (off - begin);
- return (count < begin + len - off) ? count : (begin + len - off);
+ for (i = 0; i < drv->nr; i++)
+ uart_line_info(m, drv, i);
+ return 0;
}
+
+static int uart_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, uart_proc_show, PDE(inode)->data);
+}
+
+static const struct file_operations uart_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = uart_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
#endif
#if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(CONFIG_CONSOLE_POLL)
@@ -2313,7 +2307,7 @@ static const struct tty_operations uart_ops = {
.break_ctl = uart_break_ctl,
.wait_until_sent= uart_wait_until_sent,
#ifdef CONFIG_PROC_FS
- .read_proc = uart_read_proc,
+ .proc_fops = &uart_proc_fops,
#endif
.tiocmget = uart_tiocmget,
.tiocmset = uart_tiocmset,
--
1.5.4.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists