linux-kernel - [patch 2.6.28-rc3-git] regulator: Kconfig works normally

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <200811071403.54469.david-b@pacbell.net>
Date:	Fri, 7 Nov 2008 14:03:54 -0800
From:	David Brownell <david-b@...bell.net>
To:	lrg@...mlogic.co.uk, broonie@...nsource.wolfsonmicro.com
Cc:	lkml <linux-kernel@...r.kernel.org>
Subject: [patch 2.6.28-rc3-git] regulator: Kconfig works normally


From: David Brownell <dbrownell@...rs.sourceforge.net>

Fix dependencies in drivers/regulator/Kconfig:  don't show *ANY*
options unless regulator support is enabled.  Also get rid of all
the nasty reverse dependencies.  This just switches over to use
standard Kconfig idioms, making this tree act normally.

Signed-off-by: David Brownell <dbrownell@...rs.sourceforge.net>
---
 drivers/regulator/Kconfig |   11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -23,21 +23,20 @@ config REGULATOR
 
 	  If unsure, say no.
 
+if REGULATOR
+
 config REGULATOR_DEBUG
 	bool "Regulator debug support"
-	depends on REGULATOR
 	help
 	  Say yes here to enable debugging support.
 
 config REGULATOR_FIXED_VOLTAGE
 	tristate
 	default n
-	select REGULATOR
 
 config REGULATOR_VIRTUAL_CONSUMER
 	tristate "Virtual regulator consumer support"
 	default n
-	select REGULATOR
 	help
 	  This driver provides a virtual consumer for the voltage and
           current regulator API which provides sysfs controls for
@@ -49,7 +48,6 @@ config REGULATOR_VIRTUAL_CONSUMER
 config REGULATOR_BQ24022
 	tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC"
 	default n
-	select REGULATOR
 	help
 	  This driver controls a TI bq24022 Charger attached via
 	  GPIOs. The provided current regulator can enable/disable
@@ -59,7 +57,6 @@ config REGULATOR_BQ24022
 config REGULATOR_WM8350
 	tristate "Wolfson Microelectroncis WM8350 AudioPlus PMIC"
 	depends on MFD_WM8350
-	select REGULATOR
 	help
 	  This driver provides support for the voltage and current regulators
           of the WM8350 AudioPlus PMIC.
@@ -67,7 +64,6 @@ config REGULATOR_WM8350
 config REGULATOR_WM8400
 	tristate "Wolfson Microelectroncis WM8400 AudioPlus PMIC"
 	depends on MFD_WM8400
-	select REGULATOR
 	help
 	  This driver provides support for the voltage regulators of the
 	  WM8400 AudioPlus PMIC.
@@ -75,9 +71,10 @@ config REGULATOR_WM8400
 config REGULATOR_DA903X
 	tristate "Support regulators on Dialog Semiconductor DA9030/DA9034 PMIC"
 	depends on PMIC_DA903X
-	select REGULATOR
 	help
 	  Say y here to support the BUCKs and LDOs regulators found on
 	  Dialog Semiconductor DA9030/DA9034 PMIC.
 
+endif
+
 endmenu
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/