linux-kernel - [patch 2.6.28-rc3-git] twl4030-core: allow reading entire register banks

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <200811071400.04181.david-b@pacbell.net>
Date:	Fri, 7 Nov 2008 14:00:03 -0800
From:	David Brownell <david-b@...bell.net>
To:	Samuel Ortiz <sameo@...nedhand.com>
Cc:	lkml <linux-kernel@...r.kernel.org>, linux-omap@...r.kernel.org
Subject: [patch 2.6.28-rc3-git] twl4030-core: allow reading entire register banks

From: David Brownell <dbrownell@...rs.sourceforge.net>

Minor change to the TWL4030 utility interface:  support reads
of all 256 bytes in each register bank (vs just 255).  This
can help when debugging, but is otherwise a NOP.

Signed-off-by: David Brownell <dbrownell@...rs.sourceforge.net>
---
 drivers/mfd/twl4030-core.c  |    4 ++--
 include/linux/i2c/twl4030.h |    4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/mfd/twl4030-core.c
+++ b/drivers/mfd/twl4030-core.c
@@ -233,7 +233,7 @@ extern void twl4030_power_init(struct tw
  *
  * Returns the result of operation - 0 is success
  */
-int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, u8 num_bytes)
+int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
 {
 	int ret;
 	int sid;
@@ -282,7 +282,7 @@ EXPORT_SYMBOL(twl4030_i2c_write);
  *
  * Returns result of operation - num_bytes is success else failure.
  */
-int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, u8 num_bytes)
+int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
 {
 	int ret;
 	u8 val;
--- a/include/linux/i2c/twl4030.h
+++ b/include/linux/i2c/twl4030.h
@@ -78,8 +78,8 @@ int twl4030_i2c_read_u8(u8 mod_no, u8 *v
  * IMPORTANT:  For twl4030_i2c_write(), allocate num_bytes + 1
  * for the value, and populate your data starting at offset 1.
  */
-int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, u8 num_bytes);
-int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, u8 num_bytes);
+int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
+int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
 
 /*----------------------------------------------------------------------*/
 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/