| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1ba2fa240811161554r45d98ae7h3a37ae78c332a4dd@mail.gmail.com>
Date: Mon, 17 Nov 2008 01:54:16 +0200
From: "Tomas Winkler" <tomasw@...il.com>
To: "Carlos R. Mafra" <crmafra2@...il.com>
Cc: "reinette chatre" <reinette.chatre@...el.com>,
"Lukas Hejtmanek" <xhejtman@....muni.cz>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-wireless@...r.kernel.org" <linux-wireless@...r.kernel.org>,
"ipw3945-devel@...ts.sourceforge.net"
<ipw3945-devel@...ts.sourceforge.net>
Subject: Re: iwlagn driver segfault in 2.6.28-rc3
On Sun, Nov 16, 2008 at 2:51 PM, Carlos R. Mafra <crmafra2@...il.com> wrote:
> On Sun 16.Nov'08 at 14:29:12 +0200, Tomas Winkler wrote:
>> On Sun, Nov 16, 2008 at 2:06 PM, Carlos R. Mafra <crmafra2@...il.com> wrote:
>> > I just got (another) one of this too.
>> >
>> > The wireless connection suddenly lost the AP and I was waiting
>> > for ifplugd to reconnect to it again automatically, as it always
>> > does.
>> >
>> > After waiting for one or two minutes I decided to 'modprobe -r
>> > iwlagn' but this command never returned (it got stuck).
>> >
>> > Then I looked at the end of dmesg and found this:
>>
>> Did you happen to have logs open so I can see what happen prior to that
>> We found out that this is due to double removal of an encryption key
>> but I still haven't see the exact flow.
>
> Here is the whole dmesg which I saved after that GPF.
>
> It is a bit bit because I had already suspended to ram a few times
> (which is working _fine_, btw)
Can you please try this one (might be white space broken, just pasted in)
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c
b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 61797f3..d848c63 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -734,6 +734,12 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv,
return 0;
}
+ if (WARN(priv->stations[sta_id].sta.key.key_offset ==
WEP_INVALID_OFFSET,
+ "Removing wrong key %d 0x%x\n", keyconf->keyidx, key_flags)) {
+ spin_unlock_irqrestore(&priv->sta_lock, flags);
+ return 0;
+ }
+
if (!test_and_clear_bit(priv->stations[sta_id].sta.key.key_offset,
&priv->ucode_key_table))
IWL_ERROR("index %d not used in uCode key table.\n",
Thanks
Tomas
>
> BIOS EBDA/lowmem at: 0009f800/0009f800
> Linux version 2.6.28-rc4-keypress-00322-g58e20d8 (mafra@...alhost) (gcc version 4.2.3 (4.2.3-6mnb1)) #14 SMP Fri Nov 14 00:02:57 CET 2008
> Command line: BOOT_IMAGE=2628-rc4-keypress-00322-g58e20d root=UUID=019b9dde-30e6-11dd-b550-3d3d11ee558f resume=/dev/sda6 splash=silent vga=0x0364
> KERNEL supported cpus:
> Intel GenuineIntel
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable)
> BIOS-e820: 000000007f6d0000 - 000000007f6e0000 (ACPI data)
> BIOS-e820: 000000007f6e0000 - 000000007f6e3000 (ACPI NVS)
> BIOS-e820: 000000007f6e3000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
> DMI present.
> last_pfn = 0x7f6d0 max_arch_pfn = 0x3ffffffff
> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> init_memory_mapping: 0000000000000000-000000007f6d0000
> 0000000000 - 007f600000 page 2M
> 007f600000 - 007f6d0000 page 4k
> kernel direct mapping tables up to 7f6d0000 @ 8000-c000
> last_map_addr: 7f6d0000 end: 7f6d0000
> RAMDISK: 37dc9000 - 37fef347
> ACPI: RSDP 000F8060, 0024 (r2 PTLTD )
> ACPI: XSDT 7F6D7E0E, 008C (r1 Sony VAIO 20070704 PTL 0)
> ACPI: FACP 7F6DFC04, 00F4 (r3 Sony VAIO 20070704 PTL 1)
> ACPI: DSDT 7F6D9217, 6979 (r2 Sony VAIO 20070704 PTL 20050624)
> ACPI: FACS 7F6E2FC0, 0040
> ACPI: APIC 7F6DFCF8, 0068 (r1 Sony VAIO 20070704 PTL 5A)
> ACPI: HPET 7F6DFD60, 0038 (r1 Sony VAIO 20070704 PTL 5A)
> ACPI: MCFG 7F6DFD98, 003C (r1 Sony VAIO 20070704 PTL 5A)
> ACPI: SLIC 7F6DFDD4, 0176 (r1 Sony VAIO 20070704 PTL 1000000)
> ACPI: TMOR 7F6DFF4A, 0026 (r1 Sony VAIO 20070704 PTL 3)
> ACPI: APIC 7F6DFF70, 0068 (r1 Sony VAIO 20070704 PTL 0)
> ACPI: BOOT 7F6DFFD8, 0028 (r1 Sony VAIO 20070704 PTL 1)
> ACPI: SSDT 7F6D90FA, 011D (r1 Sony VAIO 20070704 PTL 20050624)
> ACPI: SSDT 7F6D8FD7, 0123 (r1 Sony VAIO 20070704 PTL 20050624)
> ACPI: SSDT 7F6D8482, 0287 (r1 Sony VAIO 20070704 PTL 20050624)
> ACPI: SSDT 7F6D83CE, 00B4 (r1 Sony VAIO 20070704 PTL 20050624)
> ACPI: SSDT 7F6D7E9A, 0534 (r1 Sony VAIO 20070704 PTL 20050624)
> ACPI: BIOS bug: multiple APIC/MADT found, using 0
> ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@...r.kernel.org
> ACPI: DMI detected: Sony
> ACPI: Local APIC address 0xfee00000
> (6 early reservations) ==> bootmem [0000000000 - 007f6d0000]
> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
> #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
> #2 [0000200000 - 0000746690] TEXT DATA BSS ==> [0000200000 - 0000746690]
> #3 [0037dc9000 - 0037fef347] RAMDISK ==> [0037dc9000 - 0037fef347]
> #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
> #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
> [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
> Zone PFN ranges:
> DMA 0x00000000 -> 0x00001000
> DMA32 0x00001000 -> 0x00100000
> Normal 0x00100000 -> 0x00100000
> Movable zone start PFN for each node
> early_node_map[2] active PFN ranges
> 0: 0x00000000 -> 0x0000009f
> 0: 0x00000100 -> 0x0007f6d0
> On node 0 totalpages: 521839
> DMA zone: 56 pages used for memmap
> DMA zone: 1451 pages reserved
> DMA zone: 2492 pages, LIFO batch:0
> DMA32 zone: 7080 pages used for memmap
> DMA32 zone: 510760 pages, LIFO batch:31
> Normal zone: 0 pages used for memmap
> Movable zone: 0 pages used for memmap
> ACPI: PM-Timer IO Port: 0x1008
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> ACPI: HPET id: 0x8086a201 base: 0xfed00000
> SMP: Allowing 2 CPUs, 0 hotplug CPUs
> PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
> PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
> PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
> Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
> PERCPU: Allocating 45056 bytes of per cpu data
> NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 513252
> Kernel command line: BOOT_IMAGE=2628-rc4-keypress-00322-g58e20d root=UUID=019b9dde-30e6-11dd-b550-3d3d11ee558f resume=/dev/sda6 splash=silent vga=0x0364
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 32768 bytes)
> Extended CMOS year: 2000
> Fast TSC calibration using PIT
> Detected 1995.352 MHz processor.
> Console: colour dummy device 80x25
> console [tty0] enabled
> Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
> Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
> Memory: 2047292k/2087744k available (2911k kernel code, 388k absent, 39592k reserved, 1516k data, 320k init)
> hpet clockevent registered
> Calibrating delay loop (skipped), value calculated using timer frequency.. 3992.98 BogoMIPS (lpj=6651173)
> Mount-cache hash table entries: 256
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 2048K
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> CPU0: Thermal monitoring enabled (TM2)
> using mwait in idle threads.
> ACPI: Core revision 20080926
> Setting APIC routing to flat
> ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d
> Booting processor 1 APIC 0x1 ip 0x6000
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 3991.24 BogoMIPS (lpj=6649999)
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 2048K
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 1
> CPU1: Thermal monitoring enabled (TM2)
> x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
> CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d
> checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> Brought up 2 CPUs
> Total of 2 processors activated (7983.23 BogoMIPS).
> CPU0 attaching sched-domain:
> domain 0: span 0-1 level CPU
> groups: 0 1
> CPU1 attaching sched-domain:
> domain 0: span 0-1 level CPU
> groups: 1 0
> net_namespace: 856 bytes
> NET: Registered protocol family 16
> ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
> ACPI: bus type pci registered
> PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
> PCI: MCFG area at e0000000 reserved in E820
> PCI: Using MMCONFIG at e0000000 - efffffff
> PCI: Using configuration type 1 for base access
> ACPI: EC: Look up EC in DSDT
> ACPI: BIOS _OSI(Linux) query ignored via DMI
> ACPI: EC: non-query interrupt received, switching to interrupt mode
> ACPI: Interpreter enabled
> ACPI: (supports S0 S3 S4 S5)
> ACPI: Using IOAPIC for interrupt routing
> ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
> ACPI: EC: driver started in interrupt mode
> ACPI: No dock devices found.
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> pci 0000:00:02.0: reg 10 64bit mmio: [0xfc000000-0xfc0fffff]
> pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
> pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
> pci 0000:00:02.1: reg 10 64bit mmio: [0xfc100000-0xfc1fffff]
> pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f]
> pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f]
> pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc604800-0xfc604bff]
> pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
> pci 0000:00:1a.7: PME# disabled
> pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc400000-0xfc403fff]
> pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:1b.0: PME# disabled
> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.0: PME# disabled
> pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.1: PME# disabled
> pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.2: PME# disabled
> pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.4: PME# disabled
> pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f]
> pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f]
> pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf]
> pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc604c00-0xfc604fff]
> pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> pci 0000:00:1d.7: PME# disabled
> pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
> pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
> pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
> pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
> pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
> pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
> pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
> pci 0000:00:1f.2: reg 10 io port: [0x1c00-0x1c07]
> pci 0000:00:1f.2: reg 14 io port: [0x18d4-0x18d7]
> pci 0000:00:1f.2: reg 18 io port: [0x18d8-0x18df]
> pci 0000:00:1f.2: reg 1c io port: [0x18d0-0x18d3]
> pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
> pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc604000-0xfc6047ff]
> pci 0000:00:1f.2: PME# supported from D3hot
> pci 0000:00:1f.2: PME# disabled
> pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
> pci 0000:00:1f.3: reg 20 io port: [0x1c20-0x1c3f]
> pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
> pci 0000:00:1c.0: bridge 32bit mmio: [0xf6000000-0xf7ffffff]
> pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff]
> pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
> pci 0000:00:1c.1: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
> pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff]
> pci 0000:06:00.0: reg 10 64bit mmio: [0xfa000000-0xfa001fff]
> pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
> pci 0000:06:00.0: PME# disabled
> pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff]
> pci 0000:00:1c.2: bridge 32bit mmio: [0xfa000000-0xfbffffff]
> pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf4000000-0xf5ffffff]
> pci 0000:08:00.0: reg 10 64bit mmio: [0xfc200000-0xfc203fff]
> pci 0000:08:00.0: reg 18 io port: [0x5000-0x50ff]
> pci 0000:08:00.0: supports D1 D2
> pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> pci 0000:08:00.0: PME# disabled
> pci 0000:00:1c.4: bridge io port: [0x5000-0x5fff]
> pci 0000:00:1c.4: bridge 32bit mmio: [0xfc200000-0xfc2fffff]
> pci 0000:09:03.0: reg 10 32bit mmio: [0xfc300000-0xfc300fff]
> pci 0000:09:03.0: supports D1 D2
> pci 0000:09:03.0: PME# supported from D0 D1 D2 D3hot D3cold
> pci 0000:09:03.0: PME# disabled
> pci 0000:09:03.1: reg 10 32bit mmio: [0xfc302000-0xfc3027ff]
> pci 0000:09:03.1: reg 14 32bit mmio: [0xfc304000-0xfc307fff]
> pci 0000:09:03.1: supports D1 D2
> pci 0000:09:03.1: PME# supported from D0 D1 D2 D3hot D3cold
> pci 0000:09:03.1: PME# disabled
> pci 0000:09:03.2: reg 10 32bit mmio: [0xfc301000-0xfc301fff]
> pci 0000:09:03.2: supports D1 D2
> pci 0000:09:03.2: PME# supported from D0 D1 D2 D3hot
> pci 0000:09:03.2: PME# disabled
> pci 0000:00:1e.0: transparent bridge
> pci 0000:00:1e.0: bridge 32bit mmio: [0xfc300000-0xfc3fffff]
> bus 00 -> node 0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
> ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
> ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
> PCI: Using ACPI for IRQ routing
> cfg80211: Calling CRDA to update world regulatory domain
> cfg80211: Failed calling CRDA
> cfg80211: calling CRDA failed - unable to update world regulatory domain, using static definition
> hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> hpet0: 3 comparators, 64-bit 14.318180 MHz counter
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> pnp: PnP ACPI: found 10 devices
> ACPI: ACPI bus type pnp unregistered
> system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
> system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
> system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
> system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
> system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
> system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
> system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
> system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
> system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
> system 00:06: ioport range 0x680-0x69f has been reserved
> system 00:06: ioport range 0x800-0x80f has been reserved
> system 00:06: ioport range 0x1000-0x107f has been reserved
> system 00:06: ioport range 0x1180-0x11bf has been reserved
> system 00:06: ioport range 0x1640-0x164f has been reserved
> system 00:06: ioport range 0xfe00-0xfe7f has been reserved
> system 00:06: ioport range 0xfe80-0xfeff has been reserved
> pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
> pci 0000:00:1c.0: IO window: 0x2000-0x2fff
> pci 0000:00:1c.0: MEM window: 0xf6000000-0xf7ffffff
> pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff
> pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
> pci 0000:00:1c.1: IO window: 0x3000-0x3fff
> pci 0000:00:1c.1: MEM window: 0xf8000000-0xf9ffffff
> pci 0000:00:1c.1: PREFETCH window: 0x000000f2000000-0x000000f3ffffff
> pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06
> pci 0000:00:1c.2: IO window: 0x4000-0x4fff
> pci 0000:00:1c.2: MEM window: 0xfa000000-0xfbffffff
> pci 0000:00:1c.2: PREFETCH window: 0x000000f4000000-0x000000f5ffffff
> pci 0000:00:1c.4: PCI bridge, secondary bus 0000:08
> pci 0000:00:1c.4: IO window: 0x5000-0x5fff
> pci 0000:00:1c.4: MEM window: 0xfc200000-0xfc2fffff
> pci 0000:00:1c.4: PREFETCH window: disabled
> pci 0000:09:03.0: CardBus bridge, secondary bus 0000:0a
> pci 0000:09:03.0: IO window: 0x006000-0x0060ff
> pci 0000:09:03.0: IO window: 0x006400-0x0064ff
> pci 0000:09:03.0: PREFETCH window: 0x88000000-0x8bffffff
> pci 0000:09:03.0: MEM window: 0x90000000-0x93ffffff
> pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
> pci 0000:00:1e.0: IO window: 0x6000-0x6fff
> pci 0000:00:1e.0: MEM window: 0xfc300000-0xfc3fffff
> pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x0000008bffffff
> pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> pci 0000:00:1c.0: setting latency timer to 64
> pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
> pci 0000:00:1c.1: setting latency timer to 64
> pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> pci 0000:00:1c.2: setting latency timer to 64
> pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> pci 0000:00:1c.4: setting latency timer to 64
> pci 0000:00:1e.0: setting latency timer to 64
> pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> bus: 00 index 0 io port: [0x00-0xffff]
> bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
> bus: 02 index 0 io port: [0x2000-0x2fff]
> bus: 02 index 1 mmio: [0xf6000000-0xf7ffffff]
> bus: 02 index 2 mmio: [0xf0000000-0xf1ffffff]
> bus: 02 index 3 mmio: [0x0-0x0]
> bus: 04 index 0 io port: [0x3000-0x3fff]
> bus: 04 index 1 mmio: [0xf8000000-0xf9ffffff]
> bus: 04 index 2 mmio: [0xf2000000-0xf3ffffff]
> bus: 04 index 3 mmio: [0x0-0x0]
> bus: 06 index 0 io port: [0x4000-0x4fff]
> bus: 06 index 1 mmio: [0xfa000000-0xfbffffff]
> bus: 06 index 2 mmio: [0xf4000000-0xf5ffffff]
> bus: 06 index 3 mmio: [0x0-0x0]
> bus: 08 index 0 io port: [0x5000-0x5fff]
> bus: 08 index 1 mmio: [0xfc200000-0xfc2fffff]
> bus: 08 index 2 mmio: [0x0-0x0]
> bus: 08 index 3 mmio: [0x0-0x0]
> bus: 09 index 0 io port: [0x6000-0x6fff]
> bus: 09 index 1 mmio: [0xfc300000-0xfc3fffff]
> bus: 09 index 2 mmio: [0x88000000-0x8bffffff]
> bus: 09 index 3 io port: [0x00-0xffff]
> bus: 09 index 4 mmio: [0x000000-0xffffffffffffffff]
> bus: 0a index 0 io port: [0x6000-0x60ff]
> bus: 0a index 1 io port: [0x6400-0x64ff]
> bus: 0a index 2 mmio: [0x88000000-0x8bffffff]
> bus: 0a index 3 mmio: [0x90000000-0x93ffffff]
> NET: Registered protocol family 2
> IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
> TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 262144 bind 65536)
> TCP reno registered
> NET: Registered protocol family 1
> Unpacking initramfs... done
> Freeing initrd memory: 2200k freed
> Simple Boot Flag at 0x36 set to 0x1
> msgmni has been set to 4003
> alg: No test for stdrng (krng)
> io scheduler noop registered
> io scheduler cfq registered (default)
> pci 0000:00:02.0: Boot video device
> vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20010100000, using 4000k, total 7616k
> vesafb: mode is 1280x800x16, linelength=2560, pages=2
> vesafb: scrolling: redraw
> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
> Console: switching to colour frame buffer device 160x50
> fb0: VESA VGA frame buffer device
> ACPI: AC Adapter [ADP1] (on-line)
> ACPI: Battery Slot [BAT0] (battery present)
> input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
> ACPI: Lid Switch [LID0]
> input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
> ACPI: Power Button (CM) [PWRB]
> acpi device:08: registered as cooling_device0
> acpi device:09: registered as cooling_device1
> input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/input/input2
> ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
> ACPI: SSDT 7F6D8C52, 02A1 (r1 Sony VAIO 20070704 PTL 20050624)
> ACPI: SSDT 7F6D8709, 04B7 (r1 Sony VAIO 20070704 PTL 20050624)<7>Switched to high resolution mode on CPU 1
>
> Switched to high resolution mode on CPU 0
> Monitor-Mwait will be used to enter C-1 state
> Monitor-Mwait will be used to enter C-2 state
> Monitor-Mwait will be used to enter C-3 state
> ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
> processor ACPI_CPU:00: registered as cooling_device2
> ACPI: Processor [CPU0] (supports 8 throttling states)
> ACPI: SSDT 7F6D8EF3, 00E4 (r1 Sony VAIO 20070704 PTL 20050624)
> ACPI: SSDT 7F6D8BC0, 0092 (r1 Sony VAIO 20070704 PTL 20050624)
> ACPI: EC: GPE storm detected, transactions will use polling mode
> ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
> processor ACPI_CPU:01: registered as cooling_device3
> ACPI: Processor [CPU1] (supports 8 throttling states)
> thermal LNXTHERM:01: registered as thermal_zone0
> ACPI: Thermal Zone [TZ00] (45 C)
> thermal LNXTHERM:02: registered as thermal_zone1
> ACPI: Thermal Zone [TZ01] (45 C)
> Generic RTC Driver v1.07
> Linux agpgart interface v0.103
> agpgart-intel 0000:00:00.0: Intel 965GM Chipset
> agpgart-intel 0000:00:00.0: detected 7676K stolen memory
> agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
> [drm] Initialized drm 1.1.0 20060810
> pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> pci 0000:00:02.0: setting latency timer to 64
> [drm] Initialized i915 1.6.0 20080730 on minor 0
> intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets
> intelfb: Version 0.9.6
> intelfb: Cannot reserve FB region.
> tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> sony-laptop: Sony Notebook Control Driver v0.6.
> input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:29/SNY5001:00/input/input3
> input: Sony Vaio Jogdial as /devices/virtual/input/input4
> sony-laptop: detected Sony Vaio FZ Series
> Uniform Multi-Platform E-IDE driver
> ide-gd driver 1.18
> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> i8042.c: Detected active multiplexing controller, rev 1.1.
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX0 port at 0x60,0x64 irq 12
> serio: i8042 AUX1 port at 0x60,0x64 irq 12
> serio: i8042 AUX2 port at 0x60,0x64 irq 12
> serio: i8042 AUX3 port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
> cpuidle: using governor ladder
> cpuidle: using governor menu
> Marking TSC unstable due to TSC halts in idle
> sdhci: Secure Digital Host Controller Interface driver
> sdhci: Copyright(c) Pierre Ossman
> Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
> ALSA device list:
> No soundcards found.
> ip_tables: (C) 2000-2006 Netfilter Core Team
> TCP cubic registered
> NET: Registered protocol family 17
> NET: Registered protocol family 15
> Freeing unused kernel memory: 320k freed
> input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> ehci_hcd 0000:00:1a.7: setting latency timer to 64
> ehci_hcd 0000:00:1a.7: EHCI Host Controller
> ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
> ehci_hcd 0000:00:1a.7: debug port 1
> ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
> ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc604800
> ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 4 ports detected
> ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> ehci_hcd 0000:00:1d.7: setting latency timer to 64
> ehci_hcd 0000:00:1d.7: EHCI Host Controller
> ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
> ehci_hcd 0000:00:1d.7: debug port 1
> ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
> ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc604c00
> ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input6
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 6 ports detected
> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> uhci_hcd: USB Universal Host Controller Interface driver
> uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> uhci_hcd 0000:00:1a.0: setting latency timer to 64
> uhci_hcd 0000:00:1a.0: UHCI Host Controller
> uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
> uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
> usb usb3: configuration #1 chosen from 1 choice
> hub 3-0:1.0: USB hub found
> input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input7
> hub 3-0:1.0: 2 ports detected
> uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
> uhci_hcd 0000:00:1a.1: setting latency timer to 64
> uhci_hcd 0000:00:1a.1: UHCI Host Controller
> uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
> uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
> usb usb4: configuration #1 chosen from 1 choice
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> uhci_hcd 0000:00:1d.0: setting latency timer to 64
> uhci_hcd 0000:00:1d.0: UHCI Host Controller
> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
> uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
> usb usb5: configuration #1 chosen from 1 choice
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 2 ports detected
> uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> uhci_hcd 0000:00:1d.1: setting latency timer to 64
> uhci_hcd 0000:00:1d.1: UHCI Host Controller
> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
> uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
> usb usb6: configuration #1 chosen from 1 choice
> hub 6-0:1.0: USB hub found
> hub 6-0:1.0: 2 ports detected
> uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> uhci_hcd 0000:00:1d.2: setting latency timer to 64
> uhci_hcd 0000:00:1d.2: UHCI Host Controller
> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
> uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
> usb usb7: configuration #1 chosen from 1 choice
> hub 7-0:1.0: USB hub found
> hub 7-0:1.0: 2 ports detected
> SCSI subsystem initialized
> Driver 'sd' needs updating - please use bus_type methods
> Clocksource tsc unstable (delta = -128025211 ns)
> libata version 3.00 loaded.
> ahci 0000:00:1f.2: version 3.0
> ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
> ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
> ahci 0000:00:1f.2: setting latency timer to 64
> scsi0 : ahci
> scsi1 : ahci
> scsi2 : ahci
> ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed
> ata2: DUMMY
> ata3: DUMMY
> usb 1-2: new high speed USB device using ehci_hcd and address 2
> usb 1-2: configuration #1 chosen from 1 choice
> input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input8
> input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input9
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
> ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
> ata1.00: ATA-8: FUJITSU MHX2250BT, 0041000B, max UDMA/100
> ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
> ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
> ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
> ata1.00: configured for UDMA/100
> scsi 0:0:0:0: Direct-Access ATA FUJITSU MHX2250B 0041 PQ: 0 ANSI: 5
> sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 < sda5 sda6 >
> sd 0:0:0:0: [sda] Attached SCSI disk
> ata_piix 0000:00:1f.1: version 2.12
> ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
> ata_piix 0000:00:1f.1: setting latency timer to 64
> scsi3 : ata_piix
> scsi4 : ata_piix
> ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
> ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
> ata4.00: ATAPI: SONY DVD RW AW-G540A, 1.W0, max UDMA/33
> ata4.00: configured for UDMA/33
> isa bounce pool size: 16 pages
> scsi 3:0:0:0: CD-ROM SONY DVD RW AW-G540A 1.W0 PQ: 0 ANSI: 5
> EXT3-fs: INFO: recovery required on readonly filesystem.
> EXT3-fs: write access will be enabled during recovery.
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: sda1: orphan cleanup on readonly fs
> ext3_orphan_cleanup: deleting unreferenced inode 720331
> ext3_orphan_cleanup: deleting unreferenced inode 2013901
> EXT3-fs: sda1: 2 orphan inodes deleted
> EXT3-fs: recovery complete.
> EXT3-fs: mounted filesystem with ordered data mode.
> Linux video capture interface: v2.00
> iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kd
> iwlagn: Copyright(c) 2003-2008 Intel Corporation
> iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> iwlagn 0000:06:00.0: setting latency timer to 64
> iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
> Driver 'sr' needs updating - please use bus_type methods
> sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.20
> sr 3:0:0:0: Attached scsi CD-ROM sr0
> i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
> sky2 driver version 1.22
> sky2 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> sky2 0000:08:00.0: setting latency timer to 64
> sky2 0000:08:00.0: Yukon-2 FE chip revision 1
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> sr 3:0:0:0: Attached scsi generic sg1 type 5
> uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
> iwlagn: Tunable channels: 11 802.11bg, 13 802.11a channels
> sky2 0000:08:00.0: Marvell Yukon 88E8036 Fast Ethernet Controller
> Part Number: Yukon 88E8036
> Engineering Level: Rev. 1.6
> Manufacturer: Marvell
> uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
> uvcvideo: Failed to query (129) UVC control 1 (unit 0) : -32 (exp. 26).
> uvcvideo: Failed to initialize the device (-5).
> usbcore: registered new interface driver uvcvideo
> USB Video Class driver (v0.1.0)
> sky2 eth0: addr 00:1a:80:4a:7f:37
> iwlagn 0000:06:00.0: PCI INT A disabled
> phy0: Selected rate control algorithm 'iwl-agn-rs'
> HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> HDA Intel 0000:00:1b.0: setting latency timer to 64
> ohci1394 0000:09:03.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc302000-fc3027ff] Max Packet=[2048] IR/IT contexts=[4/8]
> iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x40100102, writing 0x40100106)
> iwlagn 0000:06:00.0: firmware: requesting iwlwifi-4965-2.ucode
> Registered led device: iwl-phy0:radio
> Registered led device: iwl-phy0:assoc
> Registered led device: iwl-phy0:RX
> Registered led device: iwl-phy0:TX
> ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460302903fd0]
> iwlagn: TX Power requested while scanning!
> iwlagn: Error sending TX power (-11)
> iwlagn 0000:06:00.0: PCI INT A disabled
> Non-volatile memory driver v1.2
> EXT3 FS on sda1, internal journal
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda5, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> Adding 4281280k swap on /dev/sda6. Priority:-1 extents:1 across:4281280k
> iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
> Registered led device: iwl-phy0:radio
> Registered led device: iwl-phy0:assoc
> Registered led device: iwl-phy0:RX
> Registered led device: iwl-phy0:TX
> wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1
> wlan0 direct probe responded
> wlan0: authenticate with AP 00:0b:86:dd:92:01
> wlan0: authenticated
> wlan0: associate with AP 00:0b:86:dd:92:01
> wlan0: RX AssocResp from 00:0b:86:dd:92:01 (capab=0x431 status=0 aid=1)
> wlan0: associated
> wlan0: deauthenticated
> wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1
> wlan0 direct probe responded
> wlan0: authenticate with AP 00:0b:86:dd:92:01
> wlan0: authenticated
> wlan0: associate with AP 00:0b:86:dd:92:01
> wlan0: RX ReassocResp from 00:0b:86:dd:92:01 (capab=0x431 status=0 aid=1)
> wlan0: associated
> phy0: failed to restore operational channel after scan
> evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html
> ACPI: EC: missing confirmations, switch off interrupt mode.
> evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html
> process `skype' is using obsolete setsockopt SO_BSDCOMPAT
> PM: Syncing filesystems ... done.
> Freezing user space processes ... (elapsed 0.00 seconds) done.
> Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
> Suspending console(s) (use no_console_suspend to debug)
> sd 0:0:0:0: [sda] Synchronizing SCSI cache
> sd 0:0:0:0: [sda] Stopping disk
> ACPI handle has no context!
> ACPI handle has no context!
> tifm_7xx1 0000:09:03.2: PCI INT C disabled
> ACPI handle has no context!
> ACPI handle has no context!
> iwlagn 0000:06:00.0: PCI INT A disabled
> ahci 0000:00:1f.2: PCI INT B disabled
> ata_piix 0000:00:1f.1: PCI INT A disabled
> ehci_hcd 0000:00:1d.7: PCI INT A disabled
> uhci_hcd 0000:00:1d.2: PCI INT C disabled
> uhci_hcd 0000:00:1d.1: PCI INT B disabled
> uhci_hcd 0000:00:1d.0: PCI INT A disabled
> HDA Intel 0000:00:1b.0: PCI INT A disabled
> ehci_hcd 0000:00:1a.7: PCI INT C disabled
> uhci_hcd 0000:00:1a.1: PCI INT B disabled
> uhci_hcd 0000:00:1a.0: PCI INT A disabled
> ACPI: Preparing to enter system sleep state S3
> Disabling non-boot CPUs ...
> CPU 1 is now offline
> SMP alternatives: switching to UP code
> CPU0 attaching NULL sched-domain.
> CPU1 attaching NULL sched-domain.
> CPU0 attaching NULL sched-domain.
> CPU1 is down
> Extended CMOS year: 2000
> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> Back to C!
> Extended CMOS year: 2000
> Enabling non-boot CPUs ...
> SMP alternatives: switching to SMP code
> Booting processor 1 APIC 0x1 ip 0x6000
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 3991.24 BogoMIPS (lpj=6649998)
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 2048K
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 1
> x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
> CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d
> CPU0 attaching NULL sched-domain.
> Switched to high resolution mode on CPU 1
> CPU0 attaching sched-domain:
> domain 0: span 0-1 level CPU
> groups: 0 1
> CPU1 attaching sched-domain:
> domain 0: span 0-1 level CPU
> groups: 1 0
> CPU1 is up
> ACPI: Waking up from system sleep state S3
> sony-laptop: detected Sony Vaio FZ Series
> pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> pci 0000:00:02.0: setting latency timer to 64
> uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> uhci_hcd 0000:00:1a.0: setting latency timer to 64
> usb usb3: root hub lost power or was reset
> uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
> uhci_hcd 0000:00:1a.1: setting latency timer to 64
> usb usb4: root hub lost power or was reset
> ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> ehci_hcd 0000:00:1a.7: setting latency timer to 64
> HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
> HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
> HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> HDA Intel 0000:00:1b.0: setting latency timer to 64
> pci 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a)
> pci 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20002020, writing 0x2020)
> pci 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
> pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> pci 0000:00:1c.0: setting latency timer to 64
> pci 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40205)
> pci 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf3f1f201)
> pci 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf9f0f800)
> pci 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x3030)
> pci 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
> pci 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
> pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
> pci 0000:00:1c.1: setting latency timer to 64
> pci 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x40307)
> pci 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xf5f1f401)
> pci 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xfbf0fa00)
> pci 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040)
> pci 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
> pci 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
> pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> pci 0000:00:1c.2: setting latency timer to 64
> pci 0000:00:1c.4: restoring config space at offset 0xf (was 0x40100, writing 0x4010a)
> pci 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
> pci 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xfc20fc20)
> pci 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x5050)
> pci 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
> pci 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
> pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> pci 0000:00:1c.4: setting latency timer to 64
> uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> uhci_hcd 0000:00:1d.0: setting latency timer to 64
> usb usb5: root hub lost power or was reset
> uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> uhci_hcd 0000:00:1d.1: setting latency timer to 64
> usb usb6: root hub lost power or was reset
> uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> uhci_hcd 0000:00:1d.2: setting latency timer to 64
> usb usb7: root hub lost power or was reset
> ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> ehci_hcd 0000:00:1d.7: setting latency timer to 64
> pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x8bf18801)
> pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfc30fc30)
> pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x22806060)
> pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107)
> pci 0000:00:1e.0: setting latency timer to 64
> ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
> ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
> ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
> ata_piix 0000:00:1f.1: setting latency timer to 64
> ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a)
> ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> ahci 0000:00:1f.2: setting latency timer to 64
> i801_smbus 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0x8c000000)
> iwlagn 0000:06:00.0: enabling device (0000 -> 0002)
> iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> iwlagn 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
> iwlagn 0000:06:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfa000004)
> iwlagn 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
> iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100106)
> sky2 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
> sky2 0000:08:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x5001)
> sky2 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfc200004)
> sky2 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
> sky2 0000:08:00.0: restoring config space at offset 0x1 (was 0x40100000, writing 0x100107)
> pci 0000:09:03.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x3440105)
> pci 0000:09:03.0: restoring config space at offset 0xe (was 0x0, writing 0x64fc)
> pci 0000:09:03.0: restoring config space at offset 0xd (was 0x0, writing 0x6400)
> pci 0000:09:03.0: restoring config space at offset 0xc (was 0x0, writing 0x60fc)
> pci 0000:09:03.0: restoring config space at offset 0xb (was 0x0, writing 0x6000)
> pci 0000:09:03.0: restoring config space at offset 0xa (was 0x0, writing 0x93fff000)
> pci 0000:09:03.0: restoring config space at offset 0x9 (was 0x0, writing 0x90000000)
> pci 0000:09:03.0: restoring config space at offset 0x8 (was 0x0, writing 0x8bfff000)
> pci 0000:09:03.0: restoring config space at offset 0x7 (was 0x0, writing 0x88000000)
> pci 0000:09:03.0: restoring config space at offset 0x6 (was 0x0, writing 0xb00d0a09)
> pci 0000:09:03.0: restoring config space at offset 0x4 (was 0x0, writing 0xfc300000)
> pci 0000:09:03.0: restoring config space at offset 0x3 (was 0x820000, writing 0x823110)
> pci 0000:09:03.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100107)
> pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> ohci1394 0000:09:03.1: restoring config space at offset 0xf (was 0x4030200, writing 0x403020a)
> ohci1394 0000:09:03.1: restoring config space at offset 0x5 (was 0x0, writing 0xfc304000)
> ohci1394 0000:09:03.1: restoring config space at offset 0x4 (was 0x0, writing 0xfc302000)
> ohci1394 0000:09:03.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010)
> ohci1394 0000:09:03.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100116)
> ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc302000-fc3027ff] Max Packet=[2048] IR/IT contexts=[4/8]
> tifm_7xx1 0000:09:03.2: restoring config space at offset 0xf (was 0x40703ff, writing 0x4070307)
> tifm_7xx1 0000:09:03.2: restoring config space at offset 0x4 (was 0x0, writing 0xfc301000)
> tifm_7xx1 0000:09:03.2: restoring config space at offset 0x3 (was 0x800000, writing 0x803910)
> tifm_7xx1 0000:09:03.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
> tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> pci 0000:00:02.0: setting latency timer to 64
> ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
> ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
> ata4.00: configured for UDMA/33
> Registered led device: iwl-phy0:radio
> Registered led device: iwl-phy0:assoc
> Registered led device: iwl-phy0:RX
> Registered led device: iwl-phy0:TX
> sd 0:0:0:0: [sda] Starting disk
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
> ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
> ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
> ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
> ata1.00: configured for UDMA/100
> sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> Restarting tasks ... done.
> wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1
> wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1
> wlan0 direct probe responded
> wlan0: authenticate with AP 00:0b:86:dd:92:01
> wlan0: authenticated
> wlan0: associate with AP 00:0b:86:dd:92:01
> wlan0: RX ReassocResp from 00:0b:86:dd:92:01 (capab=0x431 status=0 aid=1)
> wlan0: associated
> evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html
> ACPI: EC: missing confirmations, switch off interrupt mode.
> PM: Syncing filesystems ... done.
> Freezing user space processes ... (elapsed 0.00 seconds) done.
> Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
> Suspending console(s) (use no_console_suspend to debug)
> sd 0:0:0:0: [sda] Synchronizing SCSI cache
> sd 0:0:0:0: [sda] Stopping disk
> ACPI handle has no context!
> ACPI handle has no context!
> tifm_7xx1 0000:09:03.2: PCI INT C disabled
> ACPI handle has no context!
> ACPI handle has no context!
> iwlagn 0000:06:00.0: PCI INT A disabled
> ahci 0000:00:1f.2: PCI INT B disabled
> ata_piix 0000:00:1f.1: PCI INT A disabled
> ehci_hcd 0000:00:1d.7: PCI INT A disabled
> uhci_hcd 0000:00:1d.2: PCI INT C disabled
> uhci_hcd 0000:00:1d.1: PCI INT B disabled
> uhci_hcd 0000:00:1d.0: PCI INT A disabled
> HDA Intel 0000:00:1b.0: PCI INT A disabled
> ehci_hcd 0000:00:1a.7: PCI INT C disabled
> uhci_hcd 0000:00:1a.1: PCI INT B disabled
> uhci_hcd 0000:00:1a.0: PCI INT A disabled
> ACPI: Preparing to enter system sleep state S3
> Disabling non-boot CPUs ...
> CPU 1 is now offline
> SMP alternatives: switching to UP code
> CPU0 attaching NULL sched-domain.
> CPU1 attaching NULL sched-domain.
> CPU0 attaching NULL sched-domain.
> CPU1 is down
> Extended CMOS year: 2000
> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> Back to C!
> Extended CMOS year: 2000
> Enabling non-boot CPUs ...
> SMP alternatives: switching to SMP code
> Booting processor 1 APIC 0x1 ip 0x6000
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 3991.31 BogoMIPS (lpj=6650107)
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 2048K
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 1
> x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
> CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d
> CPU0 attaching NULL sched-domain.
> Switched to high resolution mode on CPU 1
> CPU0 attaching sched-domain:
> domain 0: span 0-1 level CPU
> groups: 0 1
> CPU1 attaching sched-domain:
> domain 0: span 0-1 level CPU
> groups: 1 0
> CPU1 is up
> ACPI: Waking up from system sleep state S3
> sony-laptop: detected Sony Vaio FZ Series
> pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> pci 0000:00:02.0: setting latency timer to 64
> uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> uhci_hcd 0000:00:1a.0: setting latency timer to 64
> usb usb3: root hub lost power or was reset
> uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
> uhci_hcd 0000:00:1a.1: setting latency timer to 64
> usb usb4: root hub lost power or was reset
> ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> ehci_hcd 0000:00:1a.7: setting latency timer to 64
> HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
> HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
> HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> HDA Intel 0000:00:1b.0: setting latency timer to 64
> pci 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a)
> pci 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
> pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> pci 0000:00:1c.0: setting latency timer to 64
> pci 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40205)
> pci 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf3f1f201)
> pci 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf9f0f800)
> pci 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x3030)
> pci 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
> pci 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
> pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
> pci 0000:00:1c.1: setting latency timer to 64
> pci 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x40307)
> pci 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xf5f1f401)
> pci 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xfbf0fa00)
> pci 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x20004040)
> pci 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
> pci 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
> pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> pci 0000:00:1c.2: setting latency timer to 64
> pci 0000:00:1c.4: restoring config space at offset 0xf (was 0x40100, writing 0x4010a)
> pci 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
> pci 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xfc20fc20)
> pci 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x20005050)
> pci 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
> pci 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
> pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> pci 0000:00:1c.4: setting latency timer to 64
> uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> uhci_hcd 0000:00:1d.0: setting latency timer to 64
> usb usb5: root hub lost power or was reset
> uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> uhci_hcd 0000:00:1d.1: setting latency timer to 64
> usb usb6: root hub lost power or was reset
> uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> uhci_hcd 0000:00:1d.2: setting latency timer to 64
> usb usb7: root hub lost power or was reset
> ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> ehci_hcd 0000:00:1d.7: setting latency timer to 64
> pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x8bf18801)
> pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfc30fc30)
> pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x22806060)
> pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107)
> pci 0000:00:1e.0: setting latency timer to 64
> ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
> ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
> ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
> ata_piix 0000:00:1f.1: setting latency timer to 64
> ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a)
> ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> ahci 0000:00:1f.2: setting latency timer to 64
> i801_smbus 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0x8c000000)
> iwlagn 0000:06:00.0: enabling device (0000 -> 0002)
> iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> iwlagn 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
> iwlagn 0000:06:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfa000004)
> iwlagn 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
> iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100106)
> sky2 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
> sky2 0000:08:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x5001)
> sky2 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfc200004)
> sky2 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
> sky2 0000:08:00.0: restoring config space at offset 0x1 (was 0x40100000, writing 0x100107)
> pci 0000:09:03.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x3440105)
> pci 0000:09:03.0: restoring config space at offset 0xe (was 0x0, writing 0x64fc)
> pci 0000:09:03.0: restoring config space at offset 0xd (was 0x0, writing 0x6400)
> pci 0000:09:03.0: restoring config space at offset 0xc (was 0x0, writing 0x60fc)
> pci 0000:09:03.0: restoring config space at offset 0xb (was 0x0, writing 0x6000)
> pci 0000:09:03.0: restoring config space at offset 0xa (was 0x0, writing 0x93fff000)
> pci 0000:09:03.0: restoring config space at offset 0x9 (was 0x0, writing 0x90000000)
> pci 0000:09:03.0: restoring config space at offset 0x8 (was 0x0, writing 0x8bfff000)
> pci 0000:09:03.0: restoring config space at offset 0x7 (was 0x0, writing 0x88000000)
> pci 0000:09:03.0: restoring config space at offset 0x6 (was 0x0, writing 0xb00d0a09)
> pci 0000:09:03.0: restoring config space at offset 0x4 (was 0x0, writing 0xfc300000)
> pci 0000:09:03.0: restoring config space at offset 0x3 (was 0x820000, writing 0x823110)
> pci 0000:09:03.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100107)
> pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> ohci1394 0000:09:03.1: restoring config space at offset 0xf (was 0x4030200, writing 0x403020a)
> ohci1394 0000:09:03.1: restoring config space at offset 0x5 (was 0x0, writing 0xfc304000)
> ohci1394 0000:09:03.1: restoring config space at offset 0x4 (was 0x0, writing 0xfc302000)
> ohci1394 0000:09:03.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010)
> ohci1394 0000:09:03.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100116)
> ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc302000-fc3027ff] Max Packet=[2048] IR/IT contexts=[4/8]
> tifm_7xx1 0000:09:03.2: restoring config space at offset 0xf (was 0x40703ff, writing 0x4070307)
> tifm_7xx1 0000:09:03.2: restoring config space at offset 0x4 (was 0x0, writing 0xfc301000)
> tifm_7xx1 0000:09:03.2: restoring config space at offset 0x3 (was 0x800000, writing 0x803910)
> tifm_7xx1 0000:09:03.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
> tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> pci 0000:00:02.0: setting latency timer to 64
> ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
> ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
> ata4.00: configured for UDMA/33
> Registered led device: iwl-phy0:radio
> Registered led device: iwl-phy0:assoc
> Registered led device: iwl-phy0:RX
> Registered led device: iwl-phy0:TX
> sd 0:0:0:0: [sda] Starting disk
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
> ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
> ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
> ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
> ata1.00: configured for UDMA/100
> sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> Restarting tasks ... done.
> wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1
> wlan0 direct probe responded
> wlan0: authenticate with AP 00:0b:86:dd:92:01
> wlan0: authenticated
> wlan0: associate with AP 00:0b:86:dd:92:01
> wlan0: RX ReassocResp from 00:0b:86:dd:92:01 (capab=0x431 status=0 aid=1)
> wlan0: associated
> phy0: failed to restore operational channel after scan
> evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html
> PM: Syncing filesystems ... done.
> Freezing user space processes ... (elapsed 0.00 seconds) done.
> Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
> Suspending console(s) (use no_console_suspend to debug)
> sd 0:0:0:0: [sda] Synchronizing SCSI cache
> sd 0:0:0:0: [sda] Stopping disk
> ACPI handle has no context!
> ACPI handle has no context!
> tifm_7xx1 0000:09:03.2: PCI INT C disabled
> ACPI handle has no context!
> ACPI handle has no context!
> iwlagn 0000:06:00.0: PCI INT A disabled
> ahci 0000:00:1f.2: PCI INT B disabled
> ata_piix 0000:00:1f.1: PCI INT A disabled
> ehci_hcd 0000:00:1d.7: PCI INT A disabled
> uhci_hcd 0000:00:1d.2: PCI INT C disabled
> uhci_hcd 0000:00:1d.1: PCI INT B disabled
> uhci_hcd 0000:00:1d.0: PCI INT A disabled
> HDA Intel 0000:00:1b.0: PCI INT A disabled
> ehci_hcd 0000:00:1a.7: PCI INT C disabled
> uhci_hcd 0000:00:1a.1: PCI INT B disabled
> uhci_hcd 0000:00:1a.0: PCI INT A disabled
> ACPI: Preparing to enter system sleep state S3
> Disabling non-boot CPUs ...
> CPU 1 is now offline
> SMP alternatives: switching to UP code
> CPU0 attaching NULL sched-domain.
> CPU1 attaching NULL sched-domain.
> CPU0 attaching NULL sched-domain.
> CPU1 is down
> Extended CMOS year: 2000
> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> Back to C!
> Extended CMOS year: 2000
> Enabling non-boot CPUs ...
> SMP alternatives: switching to SMP code
> Booting processor 1 APIC 0x1 ip 0x6000
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 3991.29 BogoMIPS (lpj=6650066)
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 2048K
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 1
> x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
> CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d
> CPU0 attaching NULL sched-domain.
> Switched to high resolution mode on CPU 1
> CPU0 attaching sched-domain:
> domain 0: span 0-1 level CPU
> groups: 0 1
> CPU1 attaching sched-domain:
> domain 0: span 0-1 level CPU
> groups: 1 0
> CPU1 is up
> ACPI: Waking up from system sleep state S3
> sony-laptop: detected Sony Vaio FZ Series
> pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> pci 0000:00:02.0: setting latency timer to 64
> uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> uhci_hcd 0000:00:1a.0: setting latency timer to 64
> usb usb3: root hub lost power or was reset
> uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
> uhci_hcd 0000:00:1a.1: setting latency timer to 64
> usb usb4: root hub lost power or was reset
> ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> ehci_hcd 0000:00:1a.7: setting latency timer to 64
> HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
> HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
> HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> HDA Intel 0000:00:1b.0: setting latency timer to 64
> pci 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a)
> pci 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
> pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> pci 0000:00:1c.0: setting latency timer to 64
> pci 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40205)
> pci 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf3f1f201)
> pci 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf9f0f800)
> pci 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x3030)
> pci 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
> pci 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
> pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
> pci 0000:00:1c.1: setting latency timer to 64
> pci 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x40307)
> pci 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xf5f1f401)
> pci 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xfbf0fa00)
> pci 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040)
> pci 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
> pci 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
> pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> pci 0000:00:1c.2: setting latency timer to 64
> pci 0000:00:1c.4: restoring config space at offset 0xf (was 0x40100, writing 0x4010a)
> pci 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
> pci 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xfc20fc20)
> pci 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x5050)
> pci 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
> pci 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
> pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> pci 0000:00:1c.4: setting latency timer to 64
> uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> uhci_hcd 0000:00:1d.0: setting latency timer to 64
> usb usb5: root hub lost power or was reset
> uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> uhci_hcd 0000:00:1d.1: setting latency timer to 64
> usb usb6: root hub lost power or was reset
> uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> uhci_hcd 0000:00:1d.2: setting latency timer to 64
> usb usb7: root hub lost power or was reset
> ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> ehci_hcd 0000:00:1d.7: setting latency timer to 64
> pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x8bf18801)
> pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfc30fc30)
> pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x22806060)
> pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107)
> pci 0000:00:1e.0: setting latency timer to 64
> ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
> ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
> ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
> ata_piix 0000:00:1f.1: setting latency timer to 64
> ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a)
> ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> ahci 0000:00:1f.2: setting latency timer to 64
> i801_smbus 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0x8c000000)
> iwlagn 0000:06:00.0: enabling device (0000 -> 0002)
> iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> iwlagn 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
> iwlagn 0000:06:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfa000004)
> iwlagn 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
> iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100106)
> sky2 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
> sky2 0000:08:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x5001)
> sky2 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfc200004)
> sky2 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
> sky2 0000:08:00.0: restoring config space at offset 0x1 (was 0x40100000, writing 0x100107)
> pci 0000:09:03.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x3440105)
> pci 0000:09:03.0: restoring config space at offset 0xe (was 0x0, writing 0x64fc)
> pci 0000:09:03.0: restoring config space at offset 0xd (was 0x0, writing 0x6400)
> pci 0000:09:03.0: restoring config space at offset 0xc (was 0x0, writing 0x60fc)
> pci 0000:09:03.0: restoring config space at offset 0xb (was 0x0, writing 0x6000)
> pci 0000:09:03.0: restoring config space at offset 0xa (was 0x0, writing 0x93fff000)
> pci 0000:09:03.0: restoring config space at offset 0x9 (was 0x0, writing 0x90000000)
> pci 0000:09:03.0: restoring config space at offset 0x8 (was 0x0, writing 0x8bfff000)
> pci 0000:09:03.0: restoring config space at offset 0x7 (was 0x0, writing 0x88000000)
> pci 0000:09:03.0: restoring config space at offset 0x6 (was 0x0, writing 0xb00d0a09)
> pci 0000:09:03.0: restoring config space at offset 0x4 (was 0x0, writing 0xfc300000)
> pci 0000:09:03.0: restoring config space at offset 0x3 (was 0x820000, writing 0x823110)
> pci 0000:09:03.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100107)
> pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> ohci1394 0000:09:03.1: restoring config space at offset 0xf (was 0x4030200, writing 0x403020a)
> ohci1394 0000:09:03.1: restoring config space at offset 0x5 (was 0x0, writing 0xfc304000)
> ohci1394 0000:09:03.1: restoring config space at offset 0x4 (was 0x0, writing 0xfc302000)
> ohci1394 0000:09:03.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010)
> ohci1394 0000:09:03.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100116)
> ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc302000-fc3027ff] Max Packet=[2048] IR/IT contexts=[4/8]
> tifm_7xx1 0000:09:03.2: restoring config space at offset 0xf (was 0x40703ff, writing 0x4070307)
> tifm_7xx1 0000:09:03.2: restoring config space at offset 0x4 (was 0x0, writing 0xfc301000)
> tifm_7xx1 0000:09:03.2: restoring config space at offset 0x3 (was 0x800000, writing 0x803910)
> tifm_7xx1 0000:09:03.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
> tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> pci 0000:00:02.0: setting latency timer to 64
> ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
> ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
> ata4.00: configured for UDMA/33
> Registered led device: iwl-phy0:radio
> Registered led device: iwl-phy0:assoc
> Registered led device: iwl-phy0:RX
> Registered led device: iwl-phy0:TX
> sd 0:0:0:0: [sda] Starting disk
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
> ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
> ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
> ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
> ata1.00: configured for UDMA/100
> sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> Restarting tasks ... <7>wlan0: deauthenticating by local choice (reason=1)
> done.
> wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1
> wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1
> wlan0 direct probe responded
> wlan0: authenticate with AP 00:0b:86:dd:92:01
> wlan0: authenticated
> wlan0: associate with AP 00:0b:86:dd:92:01
> wlan0: RX ReassocResp from 00:0b:86:dd:92:01 (capab=0x431 status=0 aid=1)
> wlan0: associated
> evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html
> wlan0: deauthenticated
> wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1
> wlan0 direct probe responded
> wlan0: authenticate with AP 00:0b:86:dd:92:01
> wlan0: authenticated
> wlan0: associate with AP 00:0b:86:dd:92:01
> wlan0: RX ReassocResp from 00:0b:86:dd:92:01 (capab=0x431 status=0 aid=1)
> wlan0: associated
> phy0: failed to restore operational channel after scan
> ACPI: EC: missing confirmations, switch off interrupt mode.
> PM: Syncing filesystems ... done.
> Freezing user space processes ... (elapsed 0.00 seconds) done.
> Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
> Suspending console(s) (use no_console_suspend to debug)
> sd 0:0:0:0: [sda] Synchronizing SCSI cache
> sd 0:0:0:0: [sda] Stopping disk
> ACPI handle has no context!
> ACPI handle has no context!
> tifm_7xx1 0000:09:03.2: PCI INT C disabled
> ACPI handle has no context!
> ACPI handle has no context!
> iwlagn 0000:06:00.0: PCI INT A disabled
> ahci 0000:00:1f.2: PCI INT B disabled
> ata_piix 0000:00:1f.1: PCI INT A disabled
> ehci_hcd 0000:00:1d.7: PCI INT A disabled
> uhci_hcd 0000:00:1d.2: PCI INT C disabled
> uhci_hcd 0000:00:1d.1: PCI INT B disabled
> uhci_hcd 0000:00:1d.0: PCI INT A disabled
> HDA Intel 0000:00:1b.0: PCI INT A disabled
> ehci_hcd 0000:00:1a.7: PCI INT C disabled
> uhci_hcd 0000:00:1a.1: PCI INT B disabled
> uhci_hcd 0000:00:1a.0: PCI INT A disabled
> ACPI: Preparing to enter system sleep state S3
> Disabling non-boot CPUs ...
> CPU 1 is now offline
> SMP alternatives: switching to UP code
> CPU0 attaching NULL sched-domain.
> CPU1 attaching NULL sched-domain.
> CPU0 attaching NULL sched-domain.
> CPU1 is down
> Extended CMOS year: 2000
> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> Back to C!
> Extended CMOS year: 2000
> Enabling non-boot CPUs ...
> SMP alternatives: switching to SMP code
> Booting processor 1 APIC 0x1 ip 0x6000
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 3991.30 BogoMIPS (lpj=6650083)
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 2048K
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 1
> x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
> CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d
> CPU0 attaching NULL sched-domain.
> Switched to high resolution mode on CPU 1
> CPU0 attaching sched-domain:
> domain 0: span 0-1 level CPU
> groups: 0 1
> CPU1 attaching sched-domain:
> domain 0: span 0-1 level CPU
> groups: 1 0
> CPU1 is up
> ACPI: Waking up from system sleep state S3
> sony-laptop: detected Sony Vaio FZ Series
> pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> pci 0000:00:02.0: setting latency timer to 64
> uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> uhci_hcd 0000:00:1a.0: setting latency timer to 64
> usb usb3: root hub lost power or was reset
> uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
> uhci_hcd 0000:00:1a.1: setting latency timer to 64
> usb usb4: root hub lost power or was reset
> ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> ehci_hcd 0000:00:1a.7: setting latency timer to 64
> HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
> HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
> HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> HDA Intel 0000:00:1b.0: setting latency timer to 64
> pci 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a)
> pci 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
> pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> pci 0000:00:1c.0: setting latency timer to 64
> pci 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40205)
> pci 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf3f1f201)
> pci 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf9f0f800)
> pci 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x3030)
> pci 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
> pci 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
> pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
> pci 0000:00:1c.1: setting latency timer to 64
> pci 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x40307)
> pci 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xf5f1f401)
> pci 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xfbf0fa00)
> pci 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x20004040)
> pci 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
> pci 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
> pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> pci 0000:00:1c.2: setting latency timer to 64
> pci 0000:00:1c.4: restoring config space at offset 0xf (was 0x40100, writing 0x4010a)
> pci 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
> pci 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xfc20fc20)
> pci 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x20005050)
> pci 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
> pci 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
> pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> pci 0000:00:1c.4: setting latency timer to 64
> uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> uhci_hcd 0000:00:1d.0: setting latency timer to 64
> usb usb5: root hub lost power or was reset
> uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> uhci_hcd 0000:00:1d.1: setting latency timer to 64
> usb usb6: root hub lost power or was reset
> uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> uhci_hcd 0000:00:1d.2: setting latency timer to 64
> usb usb7: root hub lost power or was reset
> ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> ehci_hcd 0000:00:1d.7: setting latency timer to 64
> pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x8bf18801)
> pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfc30fc30)
> pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x22806060)
> pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107)
> pci 0000:00:1e.0: setting latency timer to 64
> ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
> ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
> ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
> ata_piix 0000:00:1f.1: setting latency timer to 64
> ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a)
> ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> ahci 0000:00:1f.2: setting latency timer to 64
> i801_smbus 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0x8c000000)
> iwlagn 0000:06:00.0: enabling device (0000 -> 0002)
> iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> iwlagn 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
> iwlagn 0000:06:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfa000004)
> iwlagn 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
> iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100106)
> sky2 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
> sky2 0000:08:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x5001)
> sky2 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfc200004)
> sky2 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
> sky2 0000:08:00.0: restoring config space at offset 0x1 (was 0x40100000, writing 0x100107)
> pci 0000:09:03.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x3440105)
> pci 0000:09:03.0: restoring config space at offset 0xe (was 0x0, writing 0x64fc)
> pci 0000:09:03.0: restoring config space at offset 0xd (was 0x0, writing 0x6400)
> pci 0000:09:03.0: restoring config space at offset 0xc (was 0x0, writing 0x60fc)
> pci 0000:09:03.0: restoring config space at offset 0xb (was 0x0, writing 0x6000)
> pci 0000:09:03.0: restoring config space at offset 0xa (was 0x0, writing 0x93fff000)
> pci 0000:09:03.0: restoring config space at offset 0x9 (was 0x0, writing 0x90000000)
> pci 0000:09:03.0: restoring config space at offset 0x8 (was 0x0, writing 0x8bfff000)
> pci 0000:09:03.0: restoring config space at offset 0x7 (was 0x0, writing 0x88000000)
> pci 0000:09:03.0: restoring config space at offset 0x6 (was 0x0, writing 0xb00d0a09)
> pci 0000:09:03.0: restoring config space at offset 0x4 (was 0x0, writing 0xfc300000)
> pci 0000:09:03.0: restoring config space at offset 0x3 (was 0x820000, writing 0x823110)
> pci 0000:09:03.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100107)
> pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> ohci1394 0000:09:03.1: restoring config space at offset 0xf (was 0x4030200, writing 0x403020a)
> ohci1394 0000:09:03.1: restoring config space at offset 0x5 (was 0x0, writing 0xfc304000)
> ohci1394 0000:09:03.1: restoring config space at offset 0x4 (was 0x0, writing 0xfc302000)
> ohci1394 0000:09:03.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010)
> ohci1394 0000:09:03.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100116)
> ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc302000-fc3027ff] Max Packet=[2048] IR/IT contexts=[4/8]
> tifm_7xx1 0000:09:03.2: restoring config space at offset 0xf (was 0x40703ff, writing 0x4070307)
> tifm_7xx1 0000:09:03.2: restoring config space at offset 0x4 (was 0x0, writing 0xfc301000)
> tifm_7xx1 0000:09:03.2: restoring config space at offset 0x3 (was 0x800000, writing 0x803910)
> tifm_7xx1 0000:09:03.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
> tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> pci 0000:00:02.0: setting latency timer to 64
> ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
> ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
> ata4.00: configured for UDMA/33
> Registered led device: iwl-phy0:radio
> Registered led device: iwl-phy0:assoc
> Registered led device: iwl-phy0:RX
> Registered led device: iwl-phy0:TX
> sd 0:0:0:0: [sda] Starting disk
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
> ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
> ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
> ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
> ata1.00: configured for UDMA/100
> sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> Restarting tasks ... done.
> wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1
> wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1
> wlan0 direct probe responded
> wlan0: authenticate with AP 00:0b:86:dd:92:01
> wlan0: authenticated
> wlan0: associate with AP 00:0b:86:dd:92:01
> wlan0: RX ReassocResp from 00:0b:86:dd:92:01 (capab=0x431 status=0 aid=1)
> wlan0: associated
> evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html
> hub 2-0:1.0: unable to enumerate USB device on port 2
> usb 2-2: new high speed USB device using ehci_hcd and address 3
> usb 2-2: configuration #1 chosen from 1 choice
> Initializing USB Mass Storage driver...
> scsi5 : SCSI emulation for USB Mass Storage devices
> usb-storage: device found at 3
> usb-storage: waiting for device to settle before scanning
> usbcore: registered new interface driver usb-storage
> USB Mass Storage support registered.
> scsi 5:0:0:0: Direct-Access SanDisk Sansa Clip 8GB v02. PQ: 0 ANSI: 0
> sd 5:0:0:0: [sdb] 15993856 512-byte hardware sectors: (8.18 GB/7.62 GiB)
> sd 5:0:0:0: [sdb] Write Protect is off
> sd 5:0:0:0: [sdb] Mode Sense: 04 00 00 00
> sd 5:0:0:0: [sdb] Assuming drive cache: write through
> sd 5:0:0:0: [sdb] 15993856 512-byte hardware sectors: (8.18 GB/7.62 GiB)
> sd 5:0:0:0: [sdb] Write Protect is off
> sd 5:0:0:0: [sdb] Mode Sense: 04 00 00 00
> sd 5:0:0:0: [sdb] Assuming drive cache: write through
> sdb:
> sd 5:0:0:0: [sdb] Attached SCSI removable disk
> sd 5:0:0:0: Attached scsi generic sg2 type 0
> usb-storage: device scan complete
> usb 2-2: USB disconnect, address 3
> PM: Syncing filesystems ... done.
> Freezing user space processes ... (elapsed 0.05 seconds) done.
> Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
> Suspending console(s) (use no_console_suspend to debug)
> sd 0:0:0:0: [sda] Synchronizing SCSI cache
> sd 0:0:0:0: [sda] Stopping disk
> ACPI handle has no context!
> ACPI handle has no context!
> tifm_7xx1 0000:09:03.2: PCI INT C disabled
> ACPI handle has no context!
> ACPI handle has no context!
> iwlagn 0000:06:00.0: PCI INT A disabled
> ahci 0000:00:1f.2: PCI INT B disabled
> ata_piix 0000:00:1f.1: PCI INT A disabled
> ehci_hcd 0000:00:1d.7: PCI INT A disabled
> uhci_hcd 0000:00:1d.2: PCI INT C disabled
> uhci_hcd 0000:00:1d.1: PCI INT B disabled
> uhci_hcd 0000:00:1d.0: PCI INT A disabled
> HDA Intel 0000:00:1b.0: PCI INT A disabled
> ehci_hcd 0000:00:1a.7: PCI INT C disabled
> uhci_hcd 0000:00:1a.1: PCI INT B disabled
> uhci_hcd 0000:00:1a.0: PCI INT A disabled
> ACPI: Preparing to enter system sleep state S3
> Disabling non-boot CPUs ...
> CPU 1 is now offline
> SMP alternatives: switching to UP code
> CPU0 attaching NULL sched-domain.
> CPU1 attaching NULL sched-domain.
> CPU0 attaching NULL sched-domain.
> CPU1 is down
> Extended CMOS year: 2000
> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> Back to C!
> Extended CMOS year: 2000
> Enabling non-boot CPUs ...
> SMP alternatives: switching to SMP code
> Booting processor 1 APIC 0x1 ip 0x6000
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 3991.26 BogoMIPS (lpj=6650021)
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 2048K
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 1
> x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
> CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d
> CPU0 attaching NULL sched-domain.
> Switched to high resolution mode on CPU 1
> CPU0 attaching sched-domain:
> domain 0: span 0-1 level CPU
> groups: 0 1
> CPU1 attaching sched-domain:
> domain 0: span 0-1 level CPU
> groups: 1 0
> CPU1 is up
> ACPI: Waking up from system sleep state S3
> sony-laptop: detected Sony Vaio FZ Series
> pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> pci 0000:00:02.0: setting latency timer to 64
> uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> uhci_hcd 0000:00:1a.0: setting latency timer to 64
> usb usb3: root hub lost power or was reset
> uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
> uhci_hcd 0000:00:1a.1: setting latency timer to 64
> usb usb4: root hub lost power or was reset
> ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> ehci_hcd 0000:00:1a.7: setting latency timer to 64
> HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
> HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
> HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> HDA Intel 0000:00:1b.0: setting latency timer to 64
> pci 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a)
> pci 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
> pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> pci 0000:00:1c.0: setting latency timer to 64
> pci 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40205)
> pci 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf3f1f201)
> pci 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf9f0f800)
> pci 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x3030)
> pci 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
> pci 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
> pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
> pci 0000:00:1c.1: setting latency timer to 64
> pci 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x40307)
> pci 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xf5f1f401)
> pci 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xfbf0fa00)
> pci 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040)
> pci 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
> pci 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
> pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> pci 0000:00:1c.2: setting latency timer to 64
> pci 0000:00:1c.4: restoring config space at offset 0xf (was 0x40100, writing 0x4010a)
> pci 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
> pci 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xfc20fc20)
> pci 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x5050)
> pci 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
> pci 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
> pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> pci 0000:00:1c.4: setting latency timer to 64
> uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> uhci_hcd 0000:00:1d.0: setting latency timer to 64
> usb usb5: root hub lost power or was reset
> uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> uhci_hcd 0000:00:1d.1: setting latency timer to 64
> usb usb6: root hub lost power or was reset
> uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> uhci_hcd 0000:00:1d.2: setting latency timer to 64
> usb usb7: root hub lost power or was reset
> ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> ehci_hcd 0000:00:1d.7: setting latency timer to 64
> pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x8bf18801)
> pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfc30fc30)
> pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x22806060)
> pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107)
> pci 0000:00:1e.0: setting latency timer to 64
> ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
> ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
> ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
> ata_piix 0000:00:1f.1: setting latency timer to 64
> ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a)
> ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> ahci 0000:00:1f.2: setting latency timer to 64
> i801_smbus 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0x8c000000)
> iwlagn 0000:06:00.0: enabling device (0000 -> 0002)
> iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> iwlagn 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
> iwlagn 0000:06:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfa000004)
> iwlagn 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
> iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100106)
> sky2 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
> sky2 0000:08:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x5001)
> sky2 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfc200004)
> sky2 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
> sky2 0000:08:00.0: restoring config space at offset 0x1 (was 0x40100000, writing 0x100107)
> pci 0000:09:03.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x3440105)
> pci 0000:09:03.0: restoring config space at offset 0xe (was 0x0, writing 0x64fc)
> pci 0000:09:03.0: restoring config space at offset 0xd (was 0x0, writing 0x6400)
> pci 0000:09:03.0: restoring config space at offset 0xc (was 0x0, writing 0x60fc)
> pci 0000:09:03.0: restoring config space at offset 0xb (was 0x0, writing 0x6000)
> pci 0000:09:03.0: restoring config space at offset 0xa (was 0x0, writing 0x93fff000)
> pci 0000:09:03.0: restoring config space at offset 0x9 (was 0x0, writing 0x90000000)
> pci 0000:09:03.0: restoring config space at offset 0x8 (was 0x0, writing 0x8bfff000)
> pci 0000:09:03.0: restoring config space at offset 0x7 (was 0x0, writing 0x88000000)
> pci 0000:09:03.0: restoring config space at offset 0x6 (was 0x0, writing 0xb00d0a09)
> pci 0000:09:03.0: restoring config space at offset 0x4 (was 0x0, writing 0xfc300000)
> pci 0000:09:03.0: restoring config space at offset 0x3 (was 0x820000, writing 0x823110)
> pci 0000:09:03.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100107)
> pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> ohci1394 0000:09:03.1: restoring config space at offset 0xf (was 0x4030200, writing 0x403020a)
> ohci1394 0000:09:03.1: restoring config space at offset 0x5 (was 0x0, writing 0xfc304000)
> ohci1394 0000:09:03.1: restoring config space at offset 0x4 (was 0x0, writing 0xfc302000)
> ohci1394 0000:09:03.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010)
> ohci1394 0000:09:03.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100116)
> ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc302000-fc3027ff] Max Packet=[2048] IR/IT contexts=[4/8]
> tifm_7xx1 0000:09:03.2: restoring config space at offset 0xf (was 0x40703ff, writing 0x4070307)
> tifm_7xx1 0000:09:03.2: restoring config space at offset 0x4 (was 0x0, writing 0xfc301000)
> tifm_7xx1 0000:09:03.2: restoring config space at offset 0x3 (was 0x800000, writing 0x803910)
> tifm_7xx1 0000:09:03.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
> tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> pci 0000:00:02.0: setting latency timer to 64
> ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
> ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
> ata4.00: configured for UDMA/33
> Registered led device: iwl-phy0:radio
> Registered led device: iwl-phy0:assoc
> Registered led device: iwl-phy0:RX
> Registered led device: iwl-phy0:TX
> sd 0:0:0:0: [sda] Starting disk
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
> ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
> ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
> ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
> ata1.00: configured for UDMA/100
> sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> Restarting tasks ... <7>wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1
> done.
> wlan0: direct probe to AP 00:0b:86:dd:92:01 try 2
> wlan0: direct probe to AP 00:0b:86:dd:92:01 try 3
> wlan0: direct probe to AP 00:0b:86:dd:92:01 timed out
> wlan0: direct probe to AP 00:0b:86:28:1a:d1 try 1
> wlan0: direct probe to AP 00:0b:86:28:1a:d1 try 1
> wlan0 direct probe responded
> wlan0: authenticate with AP 00:0b:86:28:1a:d1
> wlan0: authenticated
> wlan0: associate with AP 00:0b:86:28:1a:d1
> wlan0: RX ReassocResp from 00:0b:86:28:1a:d1 (capab=0x431 status=0 aid=1)
> wlan0: associated
> evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html
> wlan0: deauthenticated
> wlan0: direct probe to AP 00:0b:86:28:1a:d1 try 1
> wlan0: direct probe to AP 00:0b:86:28:1a:d1 try 2
> wlan0 direct probe responded
> wlan0: authenticate with AP 00:0b:86:28:1a:d1
> wlan0: authenticated
> wlan0: associate with AP 00:0b:86:28:1a:d1
> wlan0: RX ReassocResp from 00:0b:86:28:1a:d1 (capab=0x431 status=0 aid=1)
> wlan0: associated
> phy0: failed to restore operational channel after scan
> phy0: failed to restore operational channel after scan
> wlan0: direct probe to AP 00:0b:86:28:21:71 try 1
> wlan0: direct probe to AP 00:0b:86:28:21:71 try 1
> wlan0 direct probe responded
> wlan0: authenticate with AP 00:0b:86:28:21:71
> wlan0: authenticated
> wlan0: associate with AP 00:0b:86:28:21:71
> wlan0: associate with AP 00:0b:86:28:21:71
> wlan0: RX ReassocResp from 00:0b:86:28:21:71 (capab=0x431 status=0 aid=1)
> wlan0: associated
> ACPI: EC: missing confirmations, switch off interrupt mode.
> iwlagn 0000:06:00.0: PCI INT A disabled
> iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
> Registered led device: iwl-phy0:radio
> Registered led device: iwl-phy0:assoc
> Registered led device: iwl-phy0:RX
> Registered led device: iwl-phy0:TX
> iwlagn 0000:06:00.0: PCI INT A disabled
> iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
> Registered led device: iwl-phy0:radio
> Registered led device: iwl-phy0:assoc
> Registered led device: iwl-phy0:RX
> Registered led device: iwl-phy0:TX
> wlan0: direct probe to AP 00:0b:86:3e:10:31 try 1
> wlan0: direct probe to AP 00:0b:86:3e:10:31 try 1
> wlan0 direct probe responded
> wlan0: authenticate with AP 00:0b:86:3e:10:31
> wlan0: authenticated
> wlan0: associate with AP 00:0b:86:3e:10:31
> wlan0: RX AssocResp from 00:0b:86:3e:10:31 (capab=0x431 status=0 aid=1)
> wlan0: associated
> wlan0: deauthenticating by local choice (reason=3)
> iwlagn 0000:06:00.0: PCI INT A disabled
> iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
> general protection fault: 0000 [#1] SMP
> last sysfs file: /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
> CPU 1
> Modules linked in: nls_iso8859_1 nls_cp437 vfat fat usb_storage xt_comment xt_policy xt_tcpmss xt_pkttype xt_owner xt_NFQUEUE xt_NFLOG xt_multiport xt_MARK xt_mark xt_mac xt_limit xt_length xt_iprange xt_hashlimit xt_dscp xt_dccp xt_CLASSIFY snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss nvram ohci1394 ieee1394 snd_hda_intel uvcvideo snd_pcm sg sky2 i2c_i801 sr_mod iwlagn compat_ioctl32 snd_timer evdev videodev snd_page_alloc v4l1_compat snd_hwdep ata_piix ahci libata sd_mod scsi_mod uhci_hcd ohci_hcd ehci_hcd usbcore [last unloaded: scsi_wait_scan]
> Pid: 3163, comm: ifplugd Not tainted 2.6.28-rc4-keypress-00322-g58e20d8 #14
> RIP: 0010:[<ffffffff803d844b>] [<ffffffff803d844b>] iwl_eeprom_query16+0xb/0x20
> RSP: 0018:ffff88007b631a88 EFLAGS: 00010092
> RAX: 7fff88007dfd5400 RBX: ffff88007d81a000 RCX: 00000000800600f0
> RDX: 0000000000000cfc RSI: 0000000000000090 RDI: ffff88007dcc1940
> RBP: ffff88007b631a88 R08: 0000000000000002 R09: ffff88007b631a5c
> R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000080006
> R13: ffff88007dcc1940 R14: ffff88007dcc29f8 R15: ffff88007d81a740
> FS: 00007f7f93ef16f0(0000) GS:ffff88007f0686c0(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> CR2: 00002ad88fdfd000 CR3: 000000007d935000 CR4: 00000000000006a0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process ifplugd (pid: 3163, threadinfo ffff88007b630000, task ffff88007b5ba980)
> Stack:
> ffff88007b631af8 ffffffffa0108526 ffff88007b631af8 ffffffffa00f3aaf
> 0000000000000000 ffff88007dcc2328 0000000000000292 0000000000000000
> 0143000000000000 ffff88007d81a000 ffff88007dcc1940 ffff88007dcc2328
> Call Trace:
> [<ffffffffa0108526>] iwl4965_nic_config+0xa6/0x380 [iwlagn]
> [<ffffffffa00f3aaf>] ? iwl4965_set_pwr_src+0x1cf/0x3d0 [iwlagn]
> [<ffffffff803d5a9b>] iwl_hw_nic_init+0x11b/0x1d0
> [<ffffffffa00fbe17>] __iwl4965_up+0x1a7/0x720 [iwlagn]
> [<ffffffffa00fd0c8>] iwl4965_mac_start+0xd38/0x1570 [iwlagn]
> [<ffffffff8022d365>] ? __wake_up_sync+0x55/0x70
> [<ffffffff8043000f>] ? sock_def_readable+0x6f/0x80
> [<ffffffff8049b893>] ? unix_dgram_sendmsg+0x463/0x4f0
> [<ffffffff804b5cf8>] ieee80211_open+0x328/0x830
> [<ffffffff8042bf5b>] ? sock_sendmsg+0xdb/0xf0
> [<ffffffff8043cba4>] dev_open+0x64/0xc0
> [<ffffffff8043ba71>] dev_change_flags+0x91/0x1b0
> [<ffffffff8047fde3>] devinet_ioctl+0x5b3/0x750
> [<ffffffff8048096d>] inet_ioctl+0x6d/0x90
> [<ffffffff8042c4d5>] sock_ioctl+0xc5/0x240
> [<ffffffff802a60f1>] vfs_ioctl+0x31/0x90
> [<ffffffff802a647b>] do_vfs_ioctl+0x32b/0x460
> [<ffffffff802a65fa>] sys_ioctl+0x4a/0x80
> [<ffffffff8020c1fb>] system_call_fastpath+0x16/0x1b
> Code: 48 8b 47 18 55 48 89 e5 48 8b 40 18 48 8b 00 ff 90 00 01 00 00 c9 c3 66 0f 1f 84 00 00 00 00 00 48 8b 87 98 22 01 00 55 48 89 e5 <0f> b6 54 06 01 0f b6 04 30 c9 c1 e2 08 09 d0 0f b7 c0 c3 66 90
> RIP [<ffffffff803d844b>] iwl_eeprom_query16+0xb/0x20
> RSP <ffff88007b631a88>
> ---[ end trace 28eaede31d178563 ]---
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists